zeigt her eure dmesgs...

[dettus]

einmal alienware m11x r3 mit freebsd 9:

Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-RELEASE #0: Tue Jan  3 07:46:30 UTC 2012
    root@farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
CPU: Intel(R) Core(TM) i7-2637M CPU @ 1.70GHz (1694.53-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x206a7  Family = 6  Model = 2a  Stepping = 7
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x17bae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,AVX>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant, performance statistics
real memory  = 17179869184 (16384 MB)
avail memory = 16449175552 (15687 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALWARE ALIENWRE>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <ALWARE ALIENWRE> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of 20000000, 200000 (3) failed
acpi0: reservation of 40000000, 200000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x6000-0x607f mem 0xd0000000-0xd0ffffff,0xa0000000-0xafffffff,0xb0000000-0xb1ffffff irq 16 at device 0.0 on pci1
vgapci1: <VGA-compatible display> port 0x7000-0x703f mem 0xd1400000-0xd17fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
pci0: <simple comms> at device 22.0 (no driver attached)
hdac0: <Intel Cougar Point High Definition Audio Controller> mem 0xd9800000-0xd9803fff irq 22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci7: <ACPI PCI bus> on pcib2
alc0: <Atheros AR8151 v2.0 PCIe Gigabit Ethernet> port 0x5000-0x507f mem 0xd8800000-0xd883ffff irq 16 at device 0.0 on pci7
alc0: 11776 Tx FIFO, 12032 Rx FIFO
alc0: Using 1 MSI message(s).
miibus0: <MII bus> on alc0
atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus0
atphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
alc0: Ethernet address: d4:be:d9:27:8c:9f
pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci13: <ACPI PCI bus> on pcib3
iwn0: <Intel(R) Centrino(R) Wireless-N 1000> mem 0xd7800000-0xd7801fff irq 18 at device 0.0 on pci13
pcib4: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci19: <ACPI PCI bus> on pcib4
fwohci0: <1394 Open Host Controller Interface> mem 0xd6805000-0xd68057ff,0xd6804000-0xd68040ff irq 19 at device 0.0 on pci19
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 ff:ff:ff:ff:ff:ff:ff:ff
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: fwphy_rddata:: 0x5 loop=100, retry=100
fwohci0: fwphy_rddata:: 0x2 loop=100, retry=100
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: fe:ff:ff:ff:ff:ff
fwe0: Ethernet address: fe:ff:ff:ff:ff:ff
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: ff:ff:ff:ff:ff:ff:ff:ff @ 0xfffe00000000, S400, maxrec 2048
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x142c000
fwohci0: Initiate bus reset
fwohci0: fwphy_rddata:: 0x1 loop=100, retry=100
fwohci0: fwphy_rddata:: 0x1 loop=100, retry=100
pci19: <base peripheral> at device 0.1 (no driver attached)
pci19: <base peripheral> at device 0.3 (no driver attached)
pcib5: <ACPI PCI-PCI bridge> at device 28.5 on pci0
pci25: <ACPI PCI bus> on pcib5
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xd5800000-0xd5801fff irq 17 at device 0.0 on pci25
usbus0: waiting for BIOS to give up control
xhci0: 32 byte context size.
usbus0 on xhci0
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd9809000-0xd98093ff irq 23 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1: <EHCI (generic) USB 2.0 controller> on ehci0
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci31: <ACPI PCI bus> on pcib6
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Cougar Point AHCI SATA controller> port 0x7088-0x708f,0x709c-0x709f,0x7080-0x7087,0x7098-0x709b,0x7060-0x707f mem 0xd9808000-0xd98087ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_lid0: <Control Method Lid Switch> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
Timecounters tick every 1.000 msec
hdac0: HDA Codec #0: Realtek ALC665
hdac0: HDA Codec #3: Intel Cougar Point HDMI
pcm0: <HDA Realtek ALC665 PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm1: <HDA Realtek ALC665 PCM #1 Analog> at cad 0 nid 1 on hdac0
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <0x1033> at usbus0
uhub0: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST9750420AS 0002DEM1> ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC-low" frequency 13238532 Hz quality 1000
uhub0: 4 ports with 4 removable, self powered
Root mount waiting for: usbus1
uhub1: 2 ports with 2 removable, self powered
Root mount waiting for: usbus1
ugen1.2: <vendor 0x8087> at usbus1
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
Root mount waiting for: usbus1
uhub2: 8 ports with 8 removable, self powered
ugen1.3: <CN04MYKF724871BEN7FLA01> at usbus1
Root mount waiting for: usbus1
ugen1.4: <Alienware Gaming> at usbus1
uhid0: <Alienware Gaming M11x-R3, class 0/0, rev 1.10/0.00, addr 4> on usbus1
Trying to mount root from ufs:/dev/ada0s4a [rw]...

[iceberg101971]

Nischt dollet

Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-RELEASE #0: Tue Jan 3 07:46:30 UTC 2012
root@farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
CPU: Intel(R) Core(TM) i3 CPU 530 @ 2.93GHz (2931.31-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x20652 Family = 6 Model = 25 Stepping = 2
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE ,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH, DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x98e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST, TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT>
AMD Features=0x28000800<SYSCALL,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 2147483648 (2048 MB)
avail memory = 2020184064 (1926 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <GBT GBTUACPI>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 4
cpu3 (AP): APIC ID: 5
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <GBT GBTUACPI> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7f6e0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xdf00-0xdf7f mem 0xf9000000-0xf9ffffff,0xd0000000-0xdfffffff,0xee000000-0xefffffff irq 16 at device 0.0 on pci1
nvidia0: <GeForce 210> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
hdac0: <NVidia (Unknown) High Definition Audio Controller> mem 0xfaffc000-0xfaffffff irq 17 at device 0.1 on pci1
uhci0: <UHCI (generic) USB controller> port 0xff00-0xff1f irq 16 at device 26.0 on pci0
uhci0: LegSup = 0x2f00
usbus0: <UHCI (generic) USB controller> on uhci0
uhci1: <UHCI (generic) USB controller> port 0xfe00-0xfe1f irq 21 at device 26.1 on pci0
uhci1: LegSup = 0x2f00
usbus1: <UHCI (generic) USB controller> on uhci1
uhci2: <UHCI (generic) USB controller> port 0xfd00-0xfd1f irq 18 at device 26.2 on pci0
uhci2: LegSup = 0x2f00
usbus2: <UHCI (generic) USB controller> on uhci2
ehci0: <Intel PCH USB 2.0 controller USB-B> mem 0xfbfff000-0xfbfff3ff irq 18 at device 26.7 on pci0
usbus3: EHCI version 1.0
usbus3: <Intel PCH USB 2.0 controller USB-B> on ehci0
hdac1: <Intel 5 Series/3400 Series High Definition Audio Controller> mem 0xfbff8000-0xfbffbfff irq 22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci3: <ACPI PCI bus> on pcib3
re0: <RealTek 8168/8111 B/C/CP/D/DP/E PCIe Gigabit Ethernet> port 0xee00-0xeeff mem 0xfbeff000-0xfbefffff,0xfbef8000-0xfbefbfff irq 17 at device 0.0 on pci3
re0: Using 1 MSI-X message
re0: Chip rev. 0x28000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Ethernet address: 6c:f0:49:b1:1f:85
uhci3: <UHCI (generic) USB controller> port 0xfc00-0xfc1f irq 23 at device 29.0 on pci0
uhci3: LegSup = 0x2f00
usbus4: <UHCI (generic) USB controller> on uhci3
uhci4: <UHCI (generic) USB controller> port 0xfb00-0xfb1f irq 19 at device 29.1 on pci0
uhci4: LegSup = 0x2f00
usbus5: <UHCI (generic) USB controller> on uhci4
uhci5: <UHCI (generic) USB controller> port 0xfa00-0xfa1f irq 18 at device 29.2 on pci0
uhci5: LegSup = 0x2f00
usbus6: <UHCI (generic) USB controller> on uhci5
ehci1: <Intel PCH USB 2.0 controller USB-A> mem 0xfbffe000-0xfbffe3ff irq 23 at device 29.7 on pci0
usbus7: EHCI version 1.0
usbus7: <Intel PCH USB 2.0 controller USB-A> on ehci1
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel 5 Series/3400 Series AHCI SATA controller> port 0xf900-0xf907,0xf800-0xf803,0xf700-0xf707,0xf600-0xf603,0xf500-0xf51f mem 0xfbffd000-0xfbffd7ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
attimer0: <AT timer> port 0x40-0x43 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
orm0: <ISA Option ROM> at iomem 0xcf000-0xd17ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
Timecounters tick every 1.000 msec
hdac0: HDA Codec #0: NVidia GT21x HDMI
hdac0: HDA Codec #1: NVidia GT21x HDMI
hdac0: HDA Codec #2: NVidia GT21x HDMI
hdac0: HDA Codec #3: NVidia GT21x HDMI
pcm0: <HDA NVidia GT21x HDMI PCM #0 DisplayPort> at cad 0 nid 1 on hdac0
pcm1: <HDA NVidia GT21x HDMI PCM #0 DisplayPort> at cad 1 nid 1 on hdac0
pcm2: <HDA NVidia GT21x HDMI PCM #0 DisplayPort> at cad 2 nid 1 on hdac0
pcm3: <HDA NVidia GT21x HDMI PCM #0 DisplayPort> at cad 3 nid 1 on hdac0
hdac1: HDA Codec #2: Realtek ALC888
pcm4: <HDA Realtek ALC888 PCM #0 Analog> at cad 2 nid 1 on hdac1
pcm5: <HDA Realtek ALC888 PCM #1 Analog> at cad 2 nid 1 on hdac1
pcm6: <HDA Realtek ALC888 PCM #2 Digital> at cad 2 nid 1 on hdac1
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD5000AAKS-00UU3A0 01.03B01> ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
SMP: AP CPU #1 Launched!
cd0 at ahcich1 bus 0 scbus1 target 0 lun 0
cd0: <TSSTcorp DVD-ROM SH-D163B SB02> Removable CD-ROM SCSI-0 device
cd0: 150.000MB/s transfers (SATA 1.x, UDMA2, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC-low" frequency 11450430 Hz quality 1000
Root mount waiting for: usbus7 usbus6 usbus5 usbus4 usbus3 usbus2 usbus1 usbus0
uhub1: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
Root mount waiting for: usbus7 usbus3
Root mount waiting for: usbus7 usbus3
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
Trying to mount root from ufs:/dev/ada0s1a [rw]...
ugen2.2: <vendor 0x15d9> at usbus2
ums0: <vendor 0x15d9 USB OPTICAL MOUSE, class 0/0, rev 1.10/1.00, addr 2> on usbus2
ums0: 3 buttons and [XYZ] coordinates ID=0

[haegga]

hier mein thinkpad T420 mit geladenen drm/i915 modulen am ende

Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-STABLE #1 r234849M: Tue May  1 23:52:39 CEST 2012
    root@mybook.local:/usr/obj/usr/src/sys/JANS amd64
module_register: module vesa already exists!
Module vesa failed to register: 17
CPU: Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz (2292.61-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x206a7  Family = 6  Model = 2a  Stepping = 7
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x1fbae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant, performance statistics
real memory  = 4294967296 (4096 MB)
avail memory = 3964387328 (3780 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <LENOVO TP-83   >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ctl: CAM Target Layer loaded
acpi0: <LENOVO TP-83> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x11, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, df900000 (3) failed
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0xf0000000-0xf03fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
agp0: <SandyBridge mobile GT2 IG> on vgapci0
agp0: aperture size is 256M, detected 65532k stolen memory
acpi_video0: <ACPI video extension> on vgapci0
pci0: <simple comms> at device 22.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0x5080-0x509f mem 0xf2500000-0xf251ffff,0xf252b000-0xf252bfff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: 00:21:cc:5e:35:f8
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf252a000-0xf252a3ff irq 16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
hdac0: <Intel Cougar Point HDA Controller> mem 0xf2520000-0xf2523fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib2
iwn0: <Intel Centrino Wireless-N 1000> mem 0xf2400000-0xf2401fff irq 17 at device 0.0 on pci3
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci5: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci13: <ACPI PCI bus> on pcib4
pci13: <base peripheral> at device 0.0 (no driver attached)
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xf2529000-0xf25293ff irq 23 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Cougar Point AHCI SATA controller> port 0x50a8-0x50af,0x50bc-0x50bf,0x50a0-0x50a7,0x50b8-0x50bb,0x5060-0x507f mem 0xf2528000-0xf25287ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_ibm0: <IBM ThinkPad ACPI Extras> on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
Timecounters tick every 1.000 msec
hdacc0: <Conexant CX20590 HDA CODEC> at cad 0 on hdac0
hdaa0: <Conexant CX20590 HDA CODEC Audio Function Group> at nid 1 on hdacc0
pcm0: <Conexant CX20590 HDA CODEC PCM (Analog)> at nid 31 and 27 on hdaa0
pcm1: <Conexant CX20590 HDA CODEC PCM (Analog)> at nid 25 and 35 on hdaa0
hdacc1: <Conexant (0x2c06) HDA CODEC> at cad 1 on hdac0
unknown: <Conexant (0x2c06) HDA CODEC Modem Function Group> at nid 2 on hdacc1 (no driver attached)
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub0: 3 ports with 3 removable, self powered
uhub1: 3 ports with 3 removable, self powered
ugen0.2: <vendor 0x8087> at usbus0
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
ugen0.3: <UPEK> at usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <OCZ-VERTEX2 1.29> ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 109704MB (224674128 512 byte sectors: 1H 63S/T 65535C)
ada0: Previously was known as ad4
SMP: AP CPU #1 Launched!
cd0 at ahcich1 bus 0 scbus1 target 0 lun 0
cd0: <Optiarc DVD RW AD-7710H 1.S0> Removable CD-ROM SCSI-0 device 
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC-low" frequency 8955511 Hz quality 1000
Root mount waiting for: usbus1 usbus0
ugen1.3: <Lenovo> at usbus1
ugen0.4: <vendor 0x17ef> at usbus0
uhub4: <vendor 0x17ef product 0x100a, class 9/0, rev 2.00/0.00, addr 4> on usbus0
Root mount waiting for: usbus0
uhub4: 6 ports with 6 removable, self powered
ugen0.5: <Logitech> at usbus0
ums0: <Logitech USB-PS2 Optical Mouse, class 0/0, rev 2.00/27.20, addr 5> on usbus0
ums0: 8 buttons and [XYZT] coordinates ID=0
Root mount waiting for: usbus0
ugen0.6: <Chicony Electronics Co., Ltd.> at usbus0
Trying to mount root from ufs:/dev/ada0s2a [rw,noatime]...
wlan0: Ethernet address: 8c:a9:82:b8:fa:22
umodem0: <F5521gw Mobile Broadband Modem> on usbus1
umodem0: data interface 2, has CM over data, has break
umodem1: <F5521gw Mobile Broadband Data Modem> on usbus1
umodem1: data interface 4, has CM over data, has break
umodem2: <F5521gw Mobile Broadband GPS Port> on usbus1
umodem2: data interface 10, has CM over data, has break
cdce0: <F5521gw Mobile Broadband Network Adapter> on usbus1
ue0: <USB Ethernet> on cdce0
ue0: Ethernet address: 02:80:37:ec:02:00
wlan0: link state changed to DOWN
wlan0: link state changed to UP
drm0: <Intel SandyBridge (M)> on vgapci0
info: [drm] MSI enabled 1 message(s)
info: [drm] AGP at 0xe0000000 256MB
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
iic0: <I2C generic I/O> on iicbus0
iic1: <I2C generic I/O> on iicbus1
iicbus2: <Philips I2C bus> on iicbb1 addr 0xff
iic2: <I2C generic I/O> on iicbus2
iic3: <I2C generic I/O> on iicbus3
iicbus4: <Philips I2C bus> on iicbb2 addr 0xff
iic4: <I2C generic I/O> on iicbus4
iic5: <I2C generic I/O> on iicbus5
iicbus6: <Philips I2C bus> on iicbb3 addr 0xff
iic6: <I2C generic I/O> on iicbus6
iic7: <I2C generic I/O> on iicbus7
iicbus8: <Philips I2C bus> on iicbb4 addr 0xff
iic8: <I2C generic I/O> on iicbus8
iic9: <I2C generic I/O> on iicbus9
iicbus10: <Philips I2C bus> on iicbb5 addr 0xff
iic10: <I2C generic I/O> on iicbus10
iic11: <I2C generic I/O> on iicbus11
iicbus12: <Philips I2C bus> on iicbb6 addr 0xff
iic12: <I2C generic I/O> on iicbus12
iic13: <I2C generic I/O> on iicbus13
iicbus14: <Philips I2C bus> on iicbb7 addr 0xff
iic14: <I2C generic I/O> on iicbus14
iic15: <I2C generic I/O> on iicbus15
info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
info: [drm] Driver supports precise vblank timestamp query.
[drm:KMS:pid1413:intel_detect_pch] Found CougarPoint PCH
[drm:KMS:pid1413:init_vbt_defaults] Set default to SSC at 100MHz
[drm:KMS:pid1413:intel_parse_bios] Using VBT from OpRegion: $VBT SANDYBRIDGE-M  d
[drm:KMS:pid1413:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 120 display_clock_mode 0
[drm:KMS:pid1413:parse_general_definitions] crt_ddc_bus_pin: 2
[drm:KMS:pid1413:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
[drm:KMS:pid1413:drm_mode_debug_printmodeline] Modeline 0:"1600x900" 0 110000 1600 1664 1706 2010 900 903 906 912 0x8 0xa
[drm:KMS:pid1413:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
[drm:KMS:pid1413:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[drm:KMS:pid1413:parse_sdvo_device_mapping] No SDVO device info is found in VBT
[drm:KMS:pid1413:intel_modeset_init] 2 display pipes available.
[drm:KMS:pid1413:intel_crt_init] pch crt adpa set to 0xf40000
[drm:KMS:pid1413:intel_setup_outputs] HDMIB 0 PCH_DP_B 0 HDMIC 0 HDMID 0 PCH_DP_C 0 PCH_DP_D 0 LVDS 1
[drm:KMS:pid1413:ironlake_crtc_dpms] crtc 0/0 dpms off
[drm:KMS:pid1413:intel_update_fbc] 
[drm:KMS:pid1413:intel_update_fbc] no output, disabling
[drm:KMS:pid1413:ironlake_crtc_dpms] crtc 1/1 dpms off
[drm:KMS:pid1413:intel_update_fbc] 
[drm:KMS:pid1413:intel_update_fbc] no output, disabling
[drm:KMS:pid1413:ironlake_init_pch_refclk] has_panel 1 has_lvds 1 has_pch_edp 0 has_cpu_edp 0 has_ck505 0
[drm:KMS:pid1413:ironlake_init_pch_refclk] Using SSC on panel
info: [drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off
drm0: taking over the fictitious range 0xe0000000-0xf0000000
[drm:KMS:pid1413:drm_helper_probe_single_connector_modes] [CONNECTOR:7:LVDS-1]
[drm:KMS:pid1413:drm_helper_probe_single_connector_modes] [CONNECTOR:7:LVDS-1] probed modes :
[drm:KMS:pid1413:drm_mode_debug_printmodeline] Modeline 16:"1600x900" 60 110000 1600 1664 1706 2010 900 903 906 912 0x48 0xa
[drm:KMS:pid1413:drm_mode_debug_printmodeline] Modeline 17:"1600x900" 40 73330 1600 1664 1706 2010 900 903 906 912 0x40 0xa
[drm:KMS:pid1413:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1]
[drm:KMS:pid1413:intel_ironlake_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0xf40000
[drm:KMS:pid1413:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0
[drm:KMS:pid1413:intel_crt_detect] CRT not detected via hotplug
[drm:KMS:pid1413:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] disconnected
[drm:KMS:pid1413:drm_setup_crtcs] 
[drm:KMS:pid1413:drm_enable_connectors] connector 7 enabled? yes
[drm:KMS:pid1413:drm_enable_connectors] connector 14 enabled? no
[drm:KMS:pid1413:drm_target_preferred] looking for cmdline mode on connector 7
[drm:KMS:pid1413:drm_target_preferred] looking for preferred mode on connector 7
[drm:KMS:pid1413:drm_target_preferred] found mode 1600x900
[drm:KMS:pid1413:drm_setup_crtcs] picking CRTCs for 8192x8192 config
[drm:KMS:pid1413:drm_setup_crtcs] desired mode 1600x900 set on crtc 3
[drm:KMS:pid1413:intelfb_create] allocated 1600x900 fb: 0x00064000, bo 0xfffffe0007e3ea00
info: [drm] Initialized i915 1.6.0 20080730
[drm:KMS:pid0:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0
[drm:KMS:pid0:intel_crt_detect] CRT not detected via hotplug
[drm:KMS:pid0:output_poll_execute] [CONNECTOR:14:VGA-1] status updated from 2 to 2