ettercap unter freeBSD 5.2.1 installieren

C

ccc

Guest
hi

weiss jemand. wie ich ettercap unter freeBSD 5.2.1 installieren kann ?

# cd /usr/ports/net/ettercap
# make install clean
make: don't know how to make install. Stop

portupgrade habe gemacht, hilft aber nicht viel.
 
Code: 
(4:09:59) elessar@loki: ~> cd /usr/ports/
(4:10:22) elessar@loki: /usr/ports> grep ettercap MOVED 
net/ettercap|net-mgmt/ettercap|2004-02-22|new category
(4:10:27) elessar@loki: /usr/ports> cd net-mgmt/ettercap/
(4:10:36) elessar@loki: /usr/ports/net-mgmt/ettercap> sudo make fetch
password:
===>  Vulnerability check disabled
>> ettercap-0.6.b.tar.gz doesn't seem to exist in /usr/ports/distfiles/.
>> Attempting to fetch from [url]http://heanet.dl.sourceforge.net/sourceforge/ettercap/[/url].
--04:10:44--  [url]http://heanet.dl.sourceforge.net/sourceforge/ettercap/ettercap-0.6.b.tar.gz[/url]
           => `ettercap-0.6.b.tar.gz'
Resolving heanet.dl.sourceforge.net... done.
Connecting to heanet.dl.sourceforge.net[2001:770:18:2::1:2]:80... failed: No route to host.
Connecting to heanet.dl.sourceforge.net[193.1.219.87]:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 689,038 [application/x-gzip]

100%[========================================================>] 689,038       78.34K/s    ETA 00:00

04:10:54 (78.34 KB/s) - `ettercap-0.6.b.tar.gz' saved [689038/689038]

(4:10:54) elessar@loki: /usr/ports/net-mgmt/ettercap> sudo make install clean
===>  Vulnerability check disabled
===>  Extracting for ettercap-gnome-0.6.b_2,1
>> Checksum OK for ettercap-0.6.b.tar.gz.
===>  Patching for ettercap-gnome-0.6.b_2,1
===>  Applying FreeBSD patches for ettercap-gnome-0.6.b_2,1
===>   ettercap-gnome-0.6.b_2,1 depends on file: /usr/local/lib/libcrypto.so.3 - found
===>   ettercap-gnome-0.6.b_2,1 depends on executable: pkg-config - found
===>   ettercap-gnome-0.6.b_2,1 depends on file: /usr/local/bin/intltool-extract - found
===>   ettercap-gnome-0.6.b_2,1 depends on shared library: glib-2.0.400 - found
===>   ettercap-gnome-0.6.b_2,1 depends on shared library: atk-1.0.600 - found
===>   ettercap-gnome-0.6.b_2,1 depends on shared library: pango-1.0.399 - found
===>   ettercap-gnome-0.6.b_2,1 depends on shared library: gtk-x11-2.0.400 - found
===>  Configuring for ettercap-gnome-0.6.b_2,1

Configuring ettercap-0.6.b...

[...]

===>   Compressing manual pages for ettercap-gnome-0.6.b_2,1
===>   Registering installation for ettercap-gnome-0.6.b_2,1
===> SECURITY REPORT: 
      This port has installed the following files which may act as network
      servers and may therefore pose a remote security risk to the system.
/usr/local/sbin/ettercap

      If there are vulnerabilities in these programs there may be a security
      risk to the system. FreeBSD makes no guarantee about the security of
      ports included in the Ports Collection. Please type 'make deinstall'
      to deinstall the port if this is a concern.

      For more information, and contact details about the security
      status of this software, see the following webpage: 
[url]http://ettercap.sourceforge.net/[/url]
===> Cleaning for [...]
Time spent in User Mode   (CPU Seconds) : 38.204s
Time spent in Kernel Mode (CPU Seconds) : 24.640s
Total Time                              : 1:59.88s
CPU utilisation (Percentage)            : 52.4%s
Times the Process was swapped           : 0s
Times of Major Page Faults              : 383
Times of Minor Page Faults              : 521484
(4:14:26) elessar@loki: /usr/ports/net-mgmt/ettercap> uname -srm
FreeBSD 5.2.1-RELEASE-p8 i386
(4:14:57) elessar@loki: /usr/ports/net-mgmt/ettercap>
Ich würde es mal damit versuchen den über 6 Monate alten Portstree zu aktualisieren.
FreeBSD Handbook - Using the Ports-Collection
 
Zuletzt bearbeitet:
Resolving heanet.dl.sourceforge.net... done.
Connecting to heanet.dl.sourceforge.net[2001:770:18:2::1:2]:80... failed: No route to host.
Connecting to heanet.dl.sourceforge.net[193.1.219.87]:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 689,038 [application/x-gzip]

100%[================================================== ======>]
Zum Vergrößern anklicken....
Time spent in User Mode (CPU Seconds) : 38.204s
Time spent in Kernel Mode (CPU Seconds) : 24.640s
Total Time : 1:59.88s
CPU utilisation (Percentage) : 52.4%s
Times the Process was swapped : 0s
Times of Major Page Faults : 383
Times of Minor Page Faults : 521484
Zum Vergrößern anklicken....

sowas hab ich ja noch nie gesehn. wasn des?
so sieht das bei mir net aus - klär mich ma uff :)
 
Das obere ist einfach wget anstatt fetch. In der /etc/make.conf:
Code: 
FETCH_CMD=              /usr/local/bin/wget -c --passive-ftp
DISABLE_SIZE=           YES

Und das untere ist eine Shelleinstellung meiner tcsh.
Code: 
# Show compile Times etc.
set time=(8 "\
Time spent in User Mode   (CPU Seconds) : %Us\
Time spent in Kernel Mode (CPU Seconds) : %Ss\
Total Time                              : %Es\
CPU utilisation (Percentage)            : %Ps\
Times the Process was swapped           : %Ws\
Times of Major Page Faults              : %F\
Times of Minor Page Faults              : %R")
 
herzlichen dank !

hatte aber via anderen weg auch erfolg:

# pkg_info | grep ettercap
ettercap-0.6.b,1 A network sniffer/interceptor/injector/logger for switched

# cd /usr/ports/net-mgmt/ettercap/

# su

# make install clean

gruss
ccc
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Zurück
Oben