KDE mit langsamem Fenstermove

S

seblueye

Well-Known Member
Liebe Leute,

ich habe auf ein Macbook 6,1 ohne Probleme FreeBSD 10.1 installiert.
Auch mit KDE.

Leider kann ich nur sehr langsam die Fenster im KDE bewegen.
So eine Art slow-motion bei löschen und wieder neumalen der Grafiken.

Kann ich einem speziellen Grafik-Treiber wie
# kldload nvidia
starten damit die Grafik im KDE normal funktioniert
und nicht so lahm geht?

Bye Basti
 
Da stellt sich natürlich die Frage... Was ist denn für ne Grafikkarte in dem Ding drin? Wenn es eine nVidia ist könntest du es natürlich mit dem nVidia-Treiber versuchen (den du natürlch zuerst installieren musst).
 
NVIDIA GeForce 9400M 256 MB glaube ich mit sehr großer wahrscheinlichkeit.
(weil ich habe zwei macbooks 6,1. auf den einem hab ich mac os x laufen und auf dem anderem freebsd.
auf dem mac os x läuft steht halt "NVIDIA GeForce 9400M 256 MB" also geh ich davon aus
das das andere macbook wo ich mir sicher bin das es auch ein 6,1-er ist die selbe grafikkarte hat.)

hier noch mein dmesg-output - aber noch eine frage wie werden nvidia-treiber installiert? tutorial?

Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.1-RELEASE #0 r274401: Tue Nov 11 22:51:51 UTC 2014
root@releng1.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC i386
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
CPU: Intel(R) Core(TM)2 Duo CPU P7550 @ 2.26GHz (2255.39-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x1067a Family = 0x6 Model = 0x17 Stepping = 10
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x408e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 2147483648 (2048 MB)
avail memory = 1795866624 (1712 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <APPLE Apple00>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 1
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd0 at kbdmux0
random: <Software, Yarrow> initialized
acpi0: <APPLE Apple00> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x3f, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
unknown: I/O range not supported
Timecounter "HPET" frequency 25000000 Hz quality 950
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
CPU0: local APIC error 0x80
CPU0: local APIC error 0x80
CPU0: local APIC error 0x80
CPU0: local APIC error 0x80
CPU0: local APIC error 0x80
CPU0: local APIC error 0x80
pci0: <memory, RAM> at device 0.1 (no driver attached)
isab0: <PCI-ISA bridge> port 0x2000-0x20ff at device 3.0 on pci0
isa0: <ISA bus> on isab0
pci0: <memory, RAM> at device 3.1 (no driver attached)
pci0: <memory, RAM> at device 3.3 (no driver attached)
pci0: <memory, RAM> at device 3.4 (no driver attached)
pci0: <processor> at device 3.5 (no driver attached)
ohci0: <nVidia nForce MCP79 USB Controller> mem 0x93388000-0x93388fff irq 18 at device 4.0 on pci0
usbus0 on ohci0
ehci0: <NVIDIA nForce MCP79 USB 2.0 controller> mem 0x93389200-0x933892ff irq 19 at device 4.1 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
ohci1: <nVidia nForce MCP79 USB Controller> mem 0x93387000-0x93387fff irq 20 at device 6.0 on pci0
usbus2 on ohci1
ehci1: <NVIDIA nForce MCP79 USB 2.0 controller> mem 0x93389100-0x933891ff irq 21 at device 6.1 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci1
hdac0: <NVIDIA MCP79 HDA Controller> mem 0x93380000-0x93383fff irq 22 at device 8.0 on pci0
pcib1: <PCI-PCI bridge> at device 9.0 on pci0
pci1: <PCI bus> on pcib1
nfe0: <NVIDIA nForce MCP79 Networking Adapter> port 0x21e0-0x21e7 mem 0x93386000-0x93386fff,0x93389000-0x933890ff,0x93389300-0x9338930f irq 23 at device 10.0 on pci0
miibus0: <MII bus> on nfe0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
nfe0: Ethernet address: 58:b0:35:b3:78:5c
ahci0: <NVIDIA MCP79 AHCI SATA controller> port 0x21d8-0x21df,0x21ec-0x21ef,0x21d0-0x21d7,0x21e8-0x21eb,0x21c0-0x21cf mem 0x93384000-0x93385fff irq 16 at device 11.0 on pci0
ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported
ahci0: quirks=0x200<NOAA>
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
pcib2: <ACPI PCI-PCI bridge> at device 16.0 on pci0
pci2: <ACPI PCI bus> on pcib2
vgapci0: <VGA-compatible display> port 0x1000-0x107f mem 0x92000000-0x92ffffff,0x80000000-0x8fffffff,0x90000000-0x91ffffff irq 17 at device 0.0 on pci2
vgapci0: Boot video device
pcib3: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <network> at device 0.0 (no driver attached)
battery0: <ACPI Control Method Battery> on acpi0
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ata0: <ATA channel> at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1: <ATA channel> at port 0x170-0x177,0x376 irq 15 on isa0
ppc0: parallel port not found.
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Timecounters tick every 1.000 msec
hdacc0: <Cirrus Logic CS4206 HDA CODEC> at cad 0 on hdac0
hdaa0: <Cirrus Logic CS4206 Audio Function Group> at nid 1 on hdacc0
pcm0: <Cirrus Logic CS4206 (Internal Analog 3.1/2.0)> at nid 11,10 and 13 on hdaa0
pcm1: <Cirrus Logic CS4206 (Rear Analog Headphones)> at nid 9 on hdaa0
pcm2: <Cirrus Logic CS4206 (Rear Digital)> at nid 16 on hdaa0
random: unblocking device.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ugen0.1: <nVidia> at usbus0
uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen3.1: <nVidia> at usbus3
uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen2.1: <nVidia> at usbus2
uhub2: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen1.1: <nVidia> at usbus1
uhub3: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <Hitachi HTS545025B9SA02 PB2AC60T> ATA-8 SATA 1.x device
ada0: Serial Number 091119PBL2001SHMH1RN
ada0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
cd0 at ahcich1 bus 0 scbus1 target 0 lun 0
cd0: <MATSHITA DVD-R UJ-898 HA07> Removable CD-ROM SCSI-0 device
cd0: Serial Number UH01 493MUX
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray open
ada0: Command Queueing enabled
ada0: 238475MB (488397168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
SMP: AP CPU #1 Launched!
uhub2: 5 ports with 5 removable, self powered
Root mount waiting for: usbus3 usbus1 usbus0
uhub0: 7 ports with 7 removable, self powered
Root mount waiting for: usbus3 usbus1
uhub1: 5 ports with 5 removable, self powered
Root mount waiting for: usbus3 usbus1
uhub3: 7 ports with 7 removable, self powered
ugen2.2: <Apple Inc.> at usbus2
uhub4: <Apple Inc. BRCM2070 Hub, class 9/0, rev 2.00/1.00, addr 2> on usbus2
Root mount waiting for: usbus1
ugen1.2: <Apple Inc.> at usbus1
uhub4: 3 ports with 0 removable, self powered
Trying to mount root from ufs:/dev/ada0p2 [rw]...
ugen2.3: <vendor 0x05ac> at usbus2
ukbd0: <vendor 0x05ac product 0x820a, class 0/0, rev 2.00/1.00, addr 3> on usbus2
kbd1 at ukbd0
ugen0.2: <Apple Inc.> at usbus0
ukbd1: <Apple Internal Keyboard> on usbus0
kbd2 at ukbd1
ugen2.4: <vendor 0x05ac> at usbus2
ugen2.5: <Apple Inc.> at usbus2
ums0: <vendor 0x05ac product 0x820b, class 0/0, rev 2.00/1.00, addr 4> on usbus2
ums0: 3 buttons and [XY] coordinates ID=2
ubt0: <Apple Inc. Bluetooth USB Host Controller, rev 2.00/0.42, addr 5> on usbus2
wsp0: <Touchpad> on usbus0
ums1: <Touchpad> on usbus0
ums1: 3 buttons and [XY] coordinates ID=2
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
ugen2.3: <vendor 0x05ac> at usbus2 (disconnected)
ukbd0: at uhub4, port 1, addr 3 (disconnected)
ugen2.4: <vendor 0x05ac> at usbus2 (disconnected)
ums0: at uhub4, port 2, addr 4 (disconnected)
ugen1.3: <SanDisk Corporation> at usbus1
umass0: <SanDisk Corporation Cruzer Micro, class 0/0, rev 2.00/0.10, addr 3> on usbus1
umass0: SCSI over Bulk-Only; quirks = 0x4100
umass0:4:0:-1: Attached to scbus4
da0 at umass-sim0 bus 0 scbus4 target 0 lun 0
da0: <SanDisk Cruzer Micro 0.1> Removable Direct Access SCSI-2 device
da0: Serial Number 20060877611B7DE0CEA7
da0: 40.000MB/s transfers
da0: 1953MB (4001760 512 byte sectors: 255H 63S/T 249C)
da0: quirks=0x2<NO_6_BYTE>
 
Wenn es nVidia ist dann war es früher einfach x11/nvidia-driver zu installieren und anschließend nvidia-xconfig ausführen. Das sollte die xorg.conf anpassen und dafür sorgen, dass alles nötige beim Systemstart gestartet wird (Linux-Compat, Kernelmodul, etc).
 
#cd /usr/ports/x11/nvidia-driver-340
#make install
hat gereicht.
Das Macbook 6,1 läuft im KDE normal, also ohne Grafikverzögerungen
 
Der Ruhezustand, Schlafmodus, Energiesparmodus... Das was so eine vernünftige Kiste macht wenn man sie zu klappt.
Der Standby selbst ist dabei übrigens seltener das Problem... viel mehr das Aufwachen aus selbigem ;)
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Zurück
Oben