PC BSD Sound Funzt nicht!

B

bsd_rookie

New Member
Hallo!

Habe Gestern auf mein Notebook(Toshiba Satelitte Pro M30) PC-BSD installiert.
Beim starten von KDE bekomme ich die Fehlermeldung daß der Soundserver nur mit no output gestartet werden kann.
Ich vermute daß es ein fehlender Treiber ist.
Das Notebook hat den Intel 855PM Chipsatz.
PC-BSD Version 0.7 (FreeBSD 5.4)
Woher bekomme ich diesen Treiber und wie wird er installiert.

Ich wäre für jede Hilfe dankbar.

Gruß

bsd_rookie
 
Danke für die schnelle Antwort @dettus!

Kann dmesg erst am Abend Posten da das Notebook nicht bei mir habe.

gruß

bsd_rookie
 
Hier ist mein dmesg!


gruß

bsd_rookie

Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RELEASE #0: Mon May 9 21:13:33 PDT 2005
root@PCBSD.Installer:/usr/obj/usr/src/sys/PCBSD.i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1.60GHz (1596.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6d6 Stepping = 6
Features=0xafe9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
real memory = 1073086464 (1023 MB)
avail memory = 1032163328 (984 MB)
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <TOSHIB 750> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82855 host to AGP bridge> mem 0xd0000000-0xdfffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1800-0x181f irq 3 at device 29.0 on pci0
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1820-0x183f irq 11 at device 29.1 on pci0
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
fwohci0: <Texas Instruments TSB43AB22/A> mem 0xc2000000-0xc2003fff,0xc2006000-0xc20067ff irq 3 at device 7.0 on pci2
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:00:39:00:00:60:fc:54
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:00:39:00:00:60:fc:54 @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
fxp0: <Intel 82801DB (ICH4) Pro/100 VE Ethernet> port 0x3000-0x303f mem 0xc2004000-0xc2004fff irq 11 at device 8.0 on pci2
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:0e:7b:33:f4:0b
pci2: <network> at device 10.0 (no driver attached)
cbb0: <ToPIC100 PCI-CardBus Bridge> at device 11.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pci2: <base peripheral> at device 13.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0x1840-0x184f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <multimedia, audio> at device 31.5 (no driver attached)
pci0: <simple comms, generic modem> at device 31.6 (no driver attached)
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> flags 0x1000 irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
ppc0: parallel port not found.
ppc0: parallel port not found.
orm0: <ISA Option ROMs> at iomem 0xe3000-0xe3fff,0xd4000-0xd57ff,0xd0000-0xd3fff on isa0
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
Timecounter "TSC" frequency 1596008517 Hz quality 800
Timecounters tick every 10.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding disabled, default to accept, logging unlimited
md0: Preloaded image </boot/mfsroot> 7340032 bytes at 0xc0947989
ad0: 76319MB <TOSHIBA MK8025GAS/KA024A> [155061/16/63] at ata0-master UDMA100
ata1-slave: FAILURE - ATAPI_IDENTIFY timed out
ata1-slave: FAILURE - ATAPI_IDENTIFY timed out
ata1-slave: FAILURE - ATAPI_IDENTIFY timed out
acd0: DVDR <MATSHITADVD-RAM UJ-820S/1.00> at ata1-master UDMA33
cd0 at ata1 bus 0 target 0 lun 0
cd0: <MATSHITA DVD-RAM UJ-820S 1.00> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/ad0s2a
warning: KLD '/boot/kernel/sound.ko' is newer than the linker.hints file
pcm0: <Intel ICH4 (82801DB)> port 0x1880-0x18bf,0x1c00-0x1cff mem 0xc0000800-0xc00008ff,0xc0000c00-0xc0000dff irq 4 at device 31.5 on pci0
pcm0: unable to map interrupt
device_attach: pcm0 attach returned 6
warning: KLD '/boot/kernel/ntfs.ko' is newer than the linker.hints
 
bsd_rookie schrieb:
warning: KLD '/boot/kernel/sound.ko' is newer than the linker.hints file
pcm0: <Intel ICH4 (82801DB)> port 0x1880-0x18bf,0x1c00-0x1cff mem 0xc0000800-0xc00008ff,0xc0000c00-0xc0000dff irq 4 at device 31.5 on pci0
pcm0: unable to map interrupt
device_attach: pcm0 attach returned 6
Zum Vergrößern anklicken....

Hier siehst Du, daß das Kernelmodul für Deinen Soundchip nicht geladen werden konnte. Der exakte Fehler ist, daß kein Interrupt zugewiesen werden konnte. Darüber erscheint aber noch die Warnung, daß das Modul neuer ist als die Hints Datei. Ich weiß nicht, ob diese Warnung in diesem Falle relevant ist. Aber vielleicht hilft es ja, wenn Du mal den Kernel neu kompilierst?
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Zurück
Oben