12.3 + Amanda -> und ewig hängt das Murmeltier

Ist es immer exakt die gleiche Zeit?

Mal ganz Wild gesponnen: Villeicht schaltet Hetzner da auf ne andere USV und das Netzteil ist etwas schwach und bricht zusammen?
 
Ist es immer exakt die gleiche Zeit?

Mal ganz Wild gesponnen: Villeicht schaltet Hetzner da auf ne andere USV und das Netzteil ist etwas schwach und bricht zusammen?

Sieht so aus und immer wenn AMANDA eine Stunde in etwa läuft.
Hetzner hat angeboten den ganzen Server zu tauschen und die Platten zu übernehmen

Kommt die Nachricht eigentlich vom sterbenden Server? Wenn ja, schreibt er in /var/log/messages etwas mehr Details, warum gekillt wird?

Die Nachricht kommt aus den Logs von AMANDA und scheint der letzte Eintrag quasi zu sein. Die Logs dazu sind aufgeteilt in /tmp/amanda und /vard/db/amanda
 
wie gewünscht haben wir den Server getauscht und die Platten übernommen.
Der Server ist wieder ins installierte System gestartet.
Wenn Sie weitere Fragen oder Probleme haben, zögern Sie nicht uns zu kontaktieren.

Nächste Runde ...

Code:
# ifconfig re0
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
    options=2018<VLAN_MTU,VLAN_HWTAGGING,WOL_MAGIC>
    ether d4:3d:7e:32:3b:81
    inet6 fe80::d63d:7eff:fe32:3b81%re0 prefixlen 64 scopeid 0x1
    inet 178.63.13.174 netmask 0xffffffc0 broadcast 178.63.13.191
    media: Ethernet autoselect (1000baseT <full-duplex>)
    status: active
    nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>



# zpool status
  pool: zroot
 state: ONLINE
  scan: none requested
config:

    NAME        STATE     READ WRITE CKSUM
    zroot       ONLINE       0     0     0
      raidz1-0  ONLINE       0     0     0
        ada1p3  ONLINE       0     0     0
        ada0p3  ONLINE       0     0     0
        ada3p3  ONLINE       0     0     0
        ada2p3  ONLINE       0     0     0

errors: No known data errors



# dmesg
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.3-RELEASE-p5 GENERIC amd64
FreeBSD clang version 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz (3392.37-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306a9  Family=0x6  Model=0x3a  Stepping=9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS>
  Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 34359738368 (32768 MB)
avail memory = 33289334784 (31747 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Launching APs: 1 5 7 6 4 3 2
Timecounter "TSC-low" frequency 1696185638 Hz quality 1000
random: entropy device external interface
WARNING: Device "g_ctl" is Giant locked and may be deleted before FreeBSD 14.0.
000.000017 [4337] netmap_init               netmap: loaded module
WARNING: Device "pci" is Giant locked and may be deleted before FreeBSD 14.0.
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff811848b0, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd1 at kbdmux0
mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020)
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <ALASKA A M I> on motherboard
acpi0: Power Button (fixed)
unknown: I/O range not supported
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7d00000-0xf7d0ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7d13000-0xf7d133ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <Realtek PCIe GbE Family Controller> port 0xe000-0xe0ff mem 0xf7c04000-0xf7c04fff,0xf7c00000-0xf7c03fff irq 17 at device 0.0 on pci2
re0: Using Memory Mapping!
re0: Using 1 MSI-X message
re0: version:1.96.04
re0: Ethernet address: d4:3d:7e:32:3b:81

This product is covered by one or more of the following patents:
US6,570,884, US6,115,776, and US6,327,625.
re0: Ethernet address: d4:3d:7e:32:3b:81
ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7d12000-0xf7d123ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Panther Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7d11000-0xf7d117ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
orm0: <ISA Option ROM> at iomem 0xce800-0xcf7ff pnpid ORM0000 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen0.1: <0x8086 XHCI root HUB> at usbus0
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus0 usbus1 usbus2 CAM
uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub0: ugen2.1: <Intel EHCI root HUB> at usbus2
<Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich2 bus 0 scbus2 target 0 lun 0
ada0: <HGST HUS726060ALE610 APGNTD05> ACS-2 ATA SATA 3.x device
ada0: Serial Number K1K6D7TD
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 5723166MB (11721045168 512 byte sectors)
ses0: pass0,ada0 in 'Slot 02', SATA Slot: scbus2 target 0
ada1 at ahcich3 bus 0 scbus3 target 0 lun 0
ada1: <HGST HUS726060ALE610 APGNTD05> ACS-2 ATA SATA 3.x device
ada1: Serial Number K1K3Z3YD
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 5723166MB (11721045168 512 byte sectors)
ada2 at ahcich4 bus 0 scbus4 target 0 lun 0
ada2: <HGST HUS726060ALE610 APGNTD05> ACS-2 ATA SATA 3.x device
ada2: Serial Number K1K7K9BD
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 5723166MB (11721045168 512 byte sectors)
ses0: pass1,ada1 in 'Slot 03', SATA Slot: scbus3 target 0
ada3 at ahcich5 bus 0 scbus5 target 0 lun 0
ada3: <HGST HUS726060ALE610 APGNTD05> ACS-2 ATA SATA 3.x device
ada3: Serial Number K1K7K87D
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 5723166MB (11721045168 512 byte sectors)
ses0: pass2,ada2 in 'Slot 04', SATA Slot: scbus4 target 0
ses0: pass3,ada3 in 'Slot 05', SATA Slot: scbus5 target 0
uhub1: 8 ports with 8 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
Root mount waiting for: usbus1 usbus2
ugen1.2: <vendor 0x8087 product 0x0024> at usbus1
uhub3 on uhub0
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
ugen2.2: <vendor 0x8087 product 0x0024> at usbus2
uhub4 on uhub2
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
Root mount waiting for: usbus1 usbus2
uhub3: 6 ports with 6 removable, self powered
uhub4: 8 ports with 8 removable, self powered
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: cannot find EC device
device_attach: acpi_wmi0 attach returned 6
lo0: link state changed to UP
re0: link state changed to UP
Security policy loaded: MAC/ntpd (mac_ntpd)
 
Nächste Runde ...

Code:
# ifconfig re0
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
    options=2018<VLAN_MTU,VLAN_HWTAGGING,WOL_MAGIC>
    ether d4:3d:7e:32:3b:81
    inet6 fe80::d63d:7eff:fe32:3b81%re0 prefixlen 64 scopeid 0x1
    inet 178.63.13.174 netmask 0xffffffc0 broadcast 178.63.13.191
    media: Ethernet autoselect (1000baseT <full-duplex>)
    status: active
    nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>



# zpool status
  pool: zroot
 state: ONLINE
  scan: none requested
config:

    NAME        STATE     READ WRITE CKSUM
    zroot       ONLINE       0     0     0
      raidz1-0  ONLINE       0     0     0
        ada1p3  ONLINE       0     0     0
        ada0p3  ONLINE       0     0     0
        ada3p3  ONLINE       0     0     0
        ada2p3  ONLINE       0     0     0

errors: No known data errors



# dmesg
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.3-RELEASE-p5 GENERIC amd64
FreeBSD clang version 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz (3392.37-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306a9  Family=0x6  Model=0x3a  Stepping=9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS>
  Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 34359738368 (32768 MB)
avail memory = 33289334784 (31747 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Launching APs: 1 5 7 6 4 3 2
Timecounter "TSC-low" frequency 1696185638 Hz quality 1000
random: entropy device external interface
WARNING: Device "g_ctl" is Giant locked and may be deleted before FreeBSD 14.0.
000.000017 [4337] netmap_init               netmap: loaded module
WARNING: Device "pci" is Giant locked and may be deleted before FreeBSD 14.0.
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff811848b0, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd1 at kbdmux0
mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020)
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <ALASKA A M I> on motherboard
acpi0: Power Button (fixed)
unknown: I/O range not supported
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7d00000-0xf7d0ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7d13000-0xf7d133ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <Realtek PCIe GbE Family Controller> port 0xe000-0xe0ff mem 0xf7c04000-0xf7c04fff,0xf7c00000-0xf7c03fff irq 17 at device 0.0 on pci2
re0: Using Memory Mapping!
re0: Using 1 MSI-X message
re0: version:1.96.04
re0: Ethernet address: d4:3d:7e:32:3b:81

This product is covered by one or more of the following patents:
US6,570,884, US6,115,776, and US6,327,625.
re0: Ethernet address: d4:3d:7e:32:3b:81
ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7d12000-0xf7d123ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Panther Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7d11000-0xf7d117ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
orm0: <ISA Option ROM> at iomem 0xce800-0xcf7ff pnpid ORM0000 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen0.1: <0x8086 XHCI root HUB> at usbus0
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus0 usbus1 usbus2 CAM
uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub0: ugen2.1: <Intel EHCI root HUB> at usbus2
<Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich2 bus 0 scbus2 target 0 lun 0
ada0: <HGST HUS726060ALE610 APGNTD05> ACS-2 ATA SATA 3.x device
ada0: Serial Number K1K6D7TD
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 5723166MB (11721045168 512 byte sectors)
ses0: pass0,ada0 in 'Slot 02', SATA Slot: scbus2 target 0
ada1 at ahcich3 bus 0 scbus3 target 0 lun 0
ada1: <HGST HUS726060ALE610 APGNTD05> ACS-2 ATA SATA 3.x device
ada1: Serial Number K1K3Z3YD
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 5723166MB (11721045168 512 byte sectors)
ada2 at ahcich4 bus 0 scbus4 target 0 lun 0
ada2: <HGST HUS726060ALE610 APGNTD05> ACS-2 ATA SATA 3.x device
ada2: Serial Number K1K7K9BD
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 5723166MB (11721045168 512 byte sectors)
ses0: pass1,ada1 in 'Slot 03', SATA Slot: scbus3 target 0
ada3 at ahcich5 bus 0 scbus5 target 0 lun 0
ada3: <HGST HUS726060ALE610 APGNTD05> ACS-2 ATA SATA 3.x device
ada3: Serial Number K1K7K87D
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 5723166MB (11721045168 512 byte sectors)
ses0: pass2,ada2 in 'Slot 04', SATA Slot: scbus4 target 0
ses0: pass3,ada3 in 'Slot 05', SATA Slot: scbus5 target 0
uhub1: 8 ports with 8 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
Root mount waiting for: usbus1 usbus2
ugen1.2: <vendor 0x8087 product 0x0024> at usbus1
uhub3 on uhub0
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
ugen2.2: <vendor 0x8087 product 0x0024> at usbus2
uhub4 on uhub2
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
Root mount waiting for: usbus1 usbus2
uhub3: 6 ports with 6 removable, self powered
uhub4: 8 ports with 8 removable, self powered
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: cannot find EC device
device_attach: acpi_wmi0 attach returned 6
lo0: link state changed to UP
re0: link state changed to UP
Security policy loaded: MAC/ntpd (mac_ntpd)
Ich drücke Dir meine Daumen und die meiner Familie :-)
 
Da steht jetzt nichts mehr von Marvell. Wissen die mehr, als sie zugeben? :rolleyes:
Noch was fällt auf: Die HUS726060ALE610 kann SATA3, wird aber nur als SATA2 erkannt. War vorher schon der Fall, muss auch nicht das Problem sein.
 
Tut es immer noch ... :)

Allerdings schlage ich mich noch mit dem sql-Server rum, der die Sicherungen abbricht, weil er keine Daten sendet.

Bei genauerer Betrachtung scheint er sichern zu wollen, allerdings sind die Datenmengen zu groß.
Nun benutzt AMANDA eine Datei namens disklist und in der werden die zu sichernden Mountpoints aufgeführt.
ZFS gibt allerdings andere Mountpoints aus als der Befehl mount. Das führt bei /var dann dazu, daß das vermutlich zweimal gesichert wird, was die Datenmengen natürlich astronomisch hochschraubt.

Code:
# mount |grep var
zroot/var/log on /var/log (zfs, local, noatime, noexec, nosuid, nfsv4acls)
zroot/var/audit on /var/audit (zfs, local, noatime, noexec, nosuid, nfsv4acls)
zroot/var/mail on /var/mail (zfs, local, nfsv4acls)
zroot/var/crash on /var/crash (zfs, local, noatime, noexec, nosuid, nfsv4acls)
zroot/var/tmp on /var/tmp (zfs, local, noatime, nosuid, nfsv4acls)



# zfs list |grep var
zroot/var           7.73M   286G    96K  /var
zroot/var/audit       96K   286G    96K  /var/audit
zroot/var/crash       96K   286G    96K  /var/crash
zroot/var/log       2.17M   286G  2.17M  /var/log
zroot/var/mail      5.18M   286G  5.18M  /var/mail
zroot/var/tmp         96K   286G    96K  /var/tmp

Was passiert denn da und warum ist das so?
 
ZFS gibt allerdings andere Mountpoints aus als der Befehl mount.
Da ist nur die Sortierung anders, ansonsten ist das deckungsgleich.

zfs list |grep var -> datasets alphabetisch
mount |grep var -> generell fstab abarbeitend, wenn zwischendrin nicht neu gemounted wurde, bleibt es so. Bei zfs dann wohl Richtung race condition.
 
Guter Punkt, stimmt. Bei /usr ist es auch so.
Bin gespannt, ob das wer erleuchten kann.
 
Code:
# zfs get canmount zroot/var
NAME       PROPERTY  VALUE     SOURCE
zroot/var  canmount  off       local

# zfs get canmount zroot/usr
NAME       PROPERTY  VALUE     SOURCE
zroot/usr  canmount  off       local

# zfs get canmount zroot/var/log
NAME           PROPERTY  VALUE     SOURCE
zroot/var/log  canmount  on        default

Spannend. Das ist eine Standardinstallation afair. Warum ist das so?
 
Wie man seinen Pool baut, ist sehr stark Geschmackssache. Ich mag das FreeBSD-Standardlayout nicht so sehr, aber es ist schon okay. Einen größeren Teil von /var will man auf dem Root-Dateisystem liegen haben, damit es Teil des Boot Environments ist. Aber einige Sachen, wie eben /var/log oder /var/audit können durchaus sinnvoll zwischen den Boot Environments geteilt sein. Letztendlich ist es wie jede Vorgabe, die das System trifft, ein Kompromis. :)
 
Verstehe ich das richtig - die Standardinstallation setzt diverse Mountpoints ins ZFS und schaltet einige davon ein, wie /var/log und andere aus, wie /var und /usr?

Folglich kann in dem Fall AMANDA vermutlich nur die eingeschalteten Mountpoints sehen und meine disklist ist falsch

to whom it may concern:
Code:
# zfs get canmount
NAME                PROPERTY  VALUE     SOURCE
zroot               canmount  on        default
zroot/ROOT          canmount  on        default
zroot/ROOT/default  canmount  on        default
zroot/tmp           canmount  on        default
zroot/usr           canmount  off       local
zroot/usr/home      canmount  on        default
zroot/usr/ports     canmount  on        default
zroot/usr/src       canmount  on        default
zroot/var           canmount  off       local
zroot/var/audit     canmount  on        default
zroot/var/crash     canmount  on        default
zroot/var/log       canmount  on        default
zroot/var/mail      canmount  on        default
zroot/var/tmp       canmount  on        default
 
Verstehe ich das richtig - die Standardinstallation setzt diverse Mountpoints ins ZFS und schaltet einige davon ein, wie /var/log und andere aus, wie /var und /usr?
Ja. Das macht die Standardinstallation, damit sie mit vererbten Mountpoints arbeiten kann. Damit zum Beispiel zroot/var/audit automagisch nach /var/audit mountet, ohne das der Mountpoint explizit gesetzt sein muss, muss es ein zroot/var geben. Aus dem gleichen Grund gibt es auch ein zroot/usr, was nicht gemountet wird.
 
Ich bin was langsam - also kann ZFS keinen Mountpoint in der zweiten Eben verwalten, wenn es keinen in der ersten hat?
 
Ich darf berichten - es läuft alles!
Das Einfrieren dürfte an der ersten Hardware gelegen haben und das nicht Senden der Einschätzung der Größe bei Amanda daran, daß er zum einen Probleme mit den nicht vorhandenen ZFS-Mountpoints hatte und er sich bei den mysql-bin.log einen Wolf rechnet.

Danke für alle Ideen und Gedanken! :):belehren:
 
Zurück
Oben