Hallo nochmal,
ich brauche nochmal Hilfe, da mich die Suchfunktion nicht weiterbringt.
Ich will meine 2 Brenner als User mit CDrecord nutzen können.
-Ich habe den Kernel mit der
device atapicam
neu kompiliert.
-Ich habe mich als User in die Gruppen wheel und operator eingetragen
-Ich habe die /etc/devfs.conf ergänzt mit:
perm cd0 0666
perm xpt0 0666
perm pass0 0666
perm cd2 0666
perm xpt1 0666
perm pass2 0666
Als User bekomme ich von Cdrecord -scanbus
Cdrecord 2.00.3 (i386-unknown-freebsd5.2) Copyright (C) 1995-2002 J�rg SchillingUsing libscg version 'schily-0.7'
scsibus0:
0,0,0 0) *
0,1,0 1) 'RICOH ' 'CD-R/RW MP7040A ' '1.40' Removable CD-ROM
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
Es scheint, als wäre nur der erste Strang gepeilt.
camcontrol devlist ergibt bei mir folgendes:
<RICOH CD-R/RW MP7040A 1.40> at scbus0 target 1 lun 0 (pass0,cd0)
<IDE DVD-ROM 16X 2.50> at scbus1 target 0 lun 0 (pass1,cd1)
<TEAC CD-W54E 1.1B> at scbus1 target 1 lun 0 (pass2,cd2)
Was habe ich denn falsch gemacht?
Vielen Dank im Voraus
-Marcus
PS:
mein dmesg lautet:
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #0: Wed Sep 29 21:27:55 CEST 2004
root@10.90.90.2:/usr/src/sys/i386/compile/MARCUS1
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a2f000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a2f26c.
ACPI APIC Table: <AMIINT SiS740XX>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) XP 2600+ (2083.11-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x681 Stepping = 1
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory = 1073676288 (1023 MB)
avail memory = 1033510912 (985 MB)
ioapic0 <Version 1.1> irqs 0-23 on motherboard
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AMIINT SiS740XX> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 10 entries at 0xc00f7e60
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <SIS Generic host to PCI bridge> mem 0xd0000000-0xd3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib1: slot 0 INTA is routed to irq 16
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <SiS 962/963 UDMA133 controller> port 0xff00-0xff0f at device 2.5 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
sis0: <SiS 900 10/100BaseTX> port 0xdc00-0xdcff mem 0xcffff000-0xcfffffff irq 19 at device 4.0 on pci0
sis0: Ethernet address: 00:00:00:00:00:00
miibus0: <MII bus> on sis0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <network> at device 10.0 (no driver attached)
pci0: <multimedia, audio> at device 11.0 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
fdc0: cmd 3 failed at out byte 1 of 3
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 0 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
fdc0: cmd 3 failed at out byte 1 of 3
orm0: <Option ROM> at iomem 0xc0000-0xccfff on isa0
pmtimer0 on isa0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2083107115 Hz quality 800
Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=0xc6b57e60
ad0: 114473MB <ST3120022A> [232581/16/63] at ata0-master UDMA100
acd0: CDRW <RICOH CD-R/RW MP7040A> at ata0-slave PIO4
acd1: DVDROM <IDE DVD-ROM 16X> at ata1-master PIO4
acd2: CDRW <CD-W54E> at ata1-slave PIO4
GEOM: create disk cd0 dp=0xc697de00
GEOM: create disk cd1 dp=0xc697e600
GEOM: create disk cd2 dp=0xc697ee00
cd1 at ata1 bus 0 target 0 lun 0
cd1: <IDE DVD-ROM 16X 2.50> Removable CD-ROM SCSI-0 device
cd1: 16.000MB/s transfers
cd1: cd present [82932 x 2048 byte records]
cd0 at ata0 bus 0 target 1 lun 0
cd0: <RICOH CD-R/RW MP7040A 1.40> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd2 at ata1 bus 0 target 1 lun 0
cd2: <TEAC CD-W54E 1.1B> Removable CD-ROM SCSI-0 device
cd2: 16.000MB/s transfers
cd2: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/ad0s2a
ich brauche nochmal Hilfe, da mich die Suchfunktion nicht weiterbringt.
Ich will meine 2 Brenner als User mit CDrecord nutzen können.
-Ich habe den Kernel mit der
device atapicam
neu kompiliert.
-Ich habe mich als User in die Gruppen wheel und operator eingetragen
-Ich habe die /etc/devfs.conf ergänzt mit:
perm cd0 0666
perm xpt0 0666
perm pass0 0666
perm cd2 0666
perm xpt1 0666
perm pass2 0666
Als User bekomme ich von Cdrecord -scanbus
Cdrecord 2.00.3 (i386-unknown-freebsd5.2) Copyright (C) 1995-2002 J�rg SchillingUsing libscg version 'schily-0.7'
scsibus0:
0,0,0 0) *
0,1,0 1) 'RICOH ' 'CD-R/RW MP7040A ' '1.40' Removable CD-ROM
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
Es scheint, als wäre nur der erste Strang gepeilt.
camcontrol devlist ergibt bei mir folgendes:
<RICOH CD-R/RW MP7040A 1.40> at scbus0 target 1 lun 0 (pass0,cd0)
<IDE DVD-ROM 16X 2.50> at scbus1 target 0 lun 0 (pass1,cd1)
<TEAC CD-W54E 1.1B> at scbus1 target 1 lun 0 (pass2,cd2)
Was habe ich denn falsch gemacht?
Vielen Dank im Voraus
-Marcus
PS:
mein dmesg lautet:
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #0: Wed Sep 29 21:27:55 CEST 2004
root@10.90.90.2:/usr/src/sys/i386/compile/MARCUS1
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a2f000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a2f26c.
ACPI APIC Table: <AMIINT SiS740XX>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) XP 2600+ (2083.11-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x681 Stepping = 1
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory = 1073676288 (1023 MB)
avail memory = 1033510912 (985 MB)
ioapic0 <Version 1.1> irqs 0-23 on motherboard
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AMIINT SiS740XX> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 10 entries at 0xc00f7e60
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <SIS Generic host to PCI bridge> mem 0xd0000000-0xd3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib1: slot 0 INTA is routed to irq 16
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <SiS 962/963 UDMA133 controller> port 0xff00-0xff0f at device 2.5 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
sis0: <SiS 900 10/100BaseTX> port 0xdc00-0xdcff mem 0xcffff000-0xcfffffff irq 19 at device 4.0 on pci0
sis0: Ethernet address: 00:00:00:00:00:00
miibus0: <MII bus> on sis0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <network> at device 10.0 (no driver attached)
pci0: <multimedia, audio> at device 11.0 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
fdc0: cmd 3 failed at out byte 1 of 3
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 0 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
fdc0: cmd 3 failed at out byte 1 of 3
orm0: <Option ROM> at iomem 0xc0000-0xccfff on isa0
pmtimer0 on isa0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2083107115 Hz quality 800
Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=0xc6b57e60
ad0: 114473MB <ST3120022A> [232581/16/63] at ata0-master UDMA100
acd0: CDRW <RICOH CD-R/RW MP7040A> at ata0-slave PIO4
acd1: DVDROM <IDE DVD-ROM 16X> at ata1-master PIO4
acd2: CDRW <CD-W54E> at ata1-slave PIO4
GEOM: create disk cd0 dp=0xc697de00
GEOM: create disk cd1 dp=0xc697e600
GEOM: create disk cd2 dp=0xc697ee00
cd1 at ata1 bus 0 target 0 lun 0
cd1: <IDE DVD-ROM 16X 2.50> Removable CD-ROM SCSI-0 device
cd1: 16.000MB/s transfers
cd1: cd present [82932 x 2048 byte records]
cd0 at ata0 bus 0 target 1 lun 0
cd0: <RICOH CD-R/RW MP7040A 1.40> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd2 at ata1 bus 0 target 1 lun 0
cd2: <TEAC CD-W54E 1.1B> Removable CD-ROM SCSI-0 device
cd2: 16.000MB/s transfers
cd2: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/ad0s2a