AIR-PCM350 Series

arasna

Well-Known Member
Hallo!
Hab ein Laptop Compaq Evo n610c auf dem FreeBSD 6.1 läuft. Da ich noch nicht so gut in BSD bin fällt mir die Fehlersuche noch recht schwer :confused: . Darum bitte ich um Hilfe. Ich hab zwei PCM Kartenanschlüsse. In dem einen Eingang wir die Karte überhaupt nicht erkannt.
dmesg Ausgabe:
Code:
cbb0: <TI1420 PCI-CardBus Bridge> mem 0x40000000-0x40000fff irq 11 at device 6.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <TI1420 PCI-CardBus Bridge> mem 0x40080000-0x40080fff at device 6.1 on pci2
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb: Unable to map IRQ...
device_attach: cbb1 attach returned 12
Und bei dem anderen Eingang bekomme ich diese Ausgabe:
Code:
Interrupt storm detected on "irq11:"; throttling interrupt source
an0: <Cisco Systems 350 Series Wireless LAN Adapter> at port 0x2100-0x213f irq 11 function 0 config 5 on pccard0
an0: record length mismatch -- expected 194, got 196 for Rid ff10
an0: record length mismatch -- expected 192, got 260 for Rid ff00
an0: got RSSI <-> dBM map
an0: supported rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
an0: Ethernet address: 00:0d:65:ca:3d:10
an0: [GIANT-LOCKED]
an0: record length mismatch -- expected 194, got 196 for Rid ff10
Hier noch die pccard.conf
Code:
# Generally available IO ports
io	0x240-0x360
# Generally available IRQs (Built-in sound-card owners remove 5)
irq	11
# Available memory slots
memory	0xd4000  96k


 Aironet PC4500 2Mbps 802.11 wireless NIC
card "Aironet" "PC4500"
	config	0x5 "an0" ?
	insert	echo Aironet PC4500 inserted
	insert	/etc/pccard_ether an0
	remove	echo Aironet PC4500 removed
	remove	/sbin/ifconfig an0 delete

# Aironet PC4800 11Mbps 802.11 wireless NIC
card "Aironet" "PC4800"
	config	0x5 "an0" ?
	insert	echo Aironet PC4800 inserted
	insert	/etc/pccard_ether an0
	remove	echo Aironet PC4800 removed
	remove	/sbin/ifconfig an0 delete
In der rc.conf ist der eintrag "pccard_enable=YES" vorhanden. Wo liegt der fehler bei mir?:D

MFG

criss
 
OK! das erste Problem gelöst.
Code:
cbb0: <TI1420 PCI-CardBus Bridge> mem 0x40000000-0x40000fff irq 11 at device 6.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <TI1420 PCI-CardBus Bridge> mem 0x40080000-0x40080fff at device 6.1 on pci2
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
Es lag an AMP. Anscheinend mag mein Laptop APM nicht. Mit ACPI sieht das schon ganz anders aus. Aber das mit dem Interrupt ist immer noch da. :confused: Werd mal weiter suchen. Hat jemand vieleicht eine URL wo ich was über das Problem finden kann?
 
Last edited:
Back
Top