• Diese Seite verwendet Cookies. Indem du diese Website weiterhin nutzt, erklärst du dich mit der Verwendung von Cookies einverstanden. Erfahre mehr

Alte Hardware geht in Rente

mr44er

Well-Known Member
Themenstarter #1
...und bevor die Rente beginnt, wollte ich euch die specs dazu nicht vorenthalten. :)

Die Kiste wurde aus Müllteilen Anfang 2014 zusammengebaut und diente als Minifiler.

space2: ~ # dmesg
Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.2-RELEASE-p3 #0 r260900M: Mon Jan 20 07:21:10 CET 2014
root@dev.nas4free.org:/usr/obj/nas4free/usr/src/sys/NAS4FREE-i386 i386
gcc version 4.2.1 20070831 patched [FreeBSD]
CPU: Intel(R) Pentium(R) 4 CPU 2.00GHz (1994.16-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Family = 0xf Model = 0x2 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x400<CNXT-ID>
real memory = 1073741824 (1024 MB)
avail memory = 777318400 (741 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <FSC APIC >
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
acpi0: <PTLTD RSDT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf008-0xf00b on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> mem 0xd8000000-0xdfffffff,0xd0000000-0xd007ffff irq 16 at device 2.0 on pci0
agp0: <Intel 82845M (845M GMCH) SVGA controller> on vgapci0
agp0: aperture size is 128M, detected 8060k stolen memory
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib1
atapci0: <VIA 6421 SATA150 controller> port 0x4400-0x440f,0x4000-0x400f,0x3c00-0x3c0f,0x3800-0x380f,0x3400-0x341f,0x3000-0x30ff irq 17 at device 5.0 on pci2
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
ata4: <ATA channel> at channel 2 on atapci0
fxp0: <Intel 82801DB (ICH4) Pro/100 VM Ethernet> port 0x4800-0x483f mem 0xd0100000-0xd0100fff irq 20 at device 8.0 on pci2
miibus0: <MII bus> on fxp0
inphy0: <i82562EM 10/100 media interface> PHY 1 on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
fxp0: Ethernet address: 00:30:05:1f:a2:ef
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2000-0x200f at device 31.1 on pci0
ata0: <ATA channel> at channel 0 on atapci1
ata1: <ATA channel> at channel 1 on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcafff,0xdc000-0xdffff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: parallel port not found.
p4tcc0: <CPU Frequency Thermal Control> on cpu0
ZFS NOTICE: Prefetch is disabled by default on i386 -- to enable,
add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS WARNING: Recommended minimum kmem_size is 512MB; expect unstable behavior.
Consider tuning vm.kmem_size and vm.kmem_size_max
in /boot/loader.conf.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled
iSCSI boot driver version 0.2.6
md0: Preloaded image </mfsroot> 232783872 bytes at 0x81a520e4
ada0 at ata4 bus 0 scbus2 target 0 lun 0
ada0: <WDC WD400EB-00CPF0 06.04G06> ATA-5 device
ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
ada0: 38166MB (78165360 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad8
ada1 at ata4 bus 0 scbus2 target 1 lun 0
ada1: <WDC WD400EB-00CPF0 06.04G06> ATA-5 device
ada1: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
ada1: 38166MB (78165360 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad9
ada2 at ata0 bus 0 scbus3 target 0 lun 0
ada2: <IC35L020AVVN07-0 VA1OAG0A> ATA-5 device
ada2: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
ada2: 19623MB (40188960 512 byte sectors: 16H 63S/T 16383C)
ada2: Previously was known as ad0
ada3 at ata1 bus 0 scbus4 target 0 lun 0
ada3: <IC35L040AVVA07-0 VA2OA51A> ATA-5 device
ada3: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
ada3: 38166MB (78165360 512 byte sectors: 16H 63S/T 16383C)
ada3: Previously was known as ad2
cd0 at ata0 bus 0 scbus3 target 1 lun 0
cd0: <MITSUMI CD-ROM FX4010M!B AM2A> Removable CD-ROM SCSI-0 device
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
Timecounter "TSC" frequency 1994159364 Hz quality 800
Trying to mount root from ufs:/dev/md0 []...
aesni0: No AESNI support.
fxp0: link state changed to UP
GEOM_ELI: Device ada0.eli created.
GEOM_ELI: Encryption: AES-CBC 128
GEOM_ELI: Crypto: software
GEOM_ELI: Device ada1.eli created.
GEOM_ELI: Encryption: AES-CBC 128
GEOM_ELI: Crypto: software
GEOM_ELI: Device ada3.eli created.
GEOM_ELI: Encryption: AES-CBC 128
GEOM_ELI: Crypto: software

Code:
space2: ~ # uptime
12:18PM  up 817 days, 21:46, 2 users, load averages: 0.01, 0.01, 0.00
Das müsste die Hochzeit vom heartbleed-bug gewesen sein, da war der reboot zwecks updates nötig.

Code:
zpool status
  pool: pool1
state: ONLINE
  scan: scrub repaired 0 in 1h39m with 0 errors on Mon Jun 11 17:38:37 2018
config:

    NAME          STATE     READ WRITE CKSUM
    pool1         ONLINE       0     0     0
      mirror-0    ONLINE       0     0     0
        ada3.eli  ONLINE       0     0     0
        ada0.eli  ONLINE       0     0     0
        ada1.eli  ONLINE       0     0     0

errors: No known data errors
Bemerkenswert, weil auch die berühmten Deathstar-Platten verbaut sind. Die Power_On_Hours stimmen.

space2: ~ # smartctl -a /dev/ada0
smartctl 6.2 2013-07-26 r3841 [FreeBSD 9.2-RELEASE-p3 i386] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family: Western Digital Protege
Device Model: WDC WD400EB-00CPF0
Serial Number: WD-WCAAT6779734
Firmware Version: 06.04G06
User Capacity: 40,020,664,320 bytes [40.0 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-5 (minor revision not indicated)
Local Time is: Wed Aug 8 12:22:56 2018 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 1754) seconds.
Offline data collection
capabilities: (0x3b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 30) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0007 092 090 021 Pre-fail Always - 2783
4 Start_Stop_Count 0x0032 093 093 040 Old_age Always - 7211
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 200 200 051 Pre-fail Always - 0
9 Power_On_Hours 0x0032 035 035 000 Old_age Always - 47505
10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2982
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0012 200 200 000 Old_age Always - 0
199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 146
200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 511 -
# 2 Extended offline Completed without error 00% 134 -

Selective Self-tests/Logging not supported

space2: ~ # smartctl -a /dev/ada1
smartctl 6.2 2013-07-26 r3841 [FreeBSD 9.2-RELEASE-p3 i386] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family: Western Digital Protege
Device Model: WDC WD400EB-00CPF0
Serial Number: WD-WCAAT5056982
Firmware Version: 06.04G06
User Capacity: 40,020,664,320 bytes [40.0 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-5 (minor revision not indicated)
Local Time is: Wed Aug 8 12:23:20 2018 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 1754) seconds.
Offline data collection
capabilities: (0x3b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 30) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 200 169 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0007 093 090 021 Pre-fail Always - 2733
4 Start_Stop_Count 0x0032 093 093 040 Old_age Always - 7568
5 Reallocated_Sector_Ct 0x0033 199 199 140 Pre-fail Always - 1
7 Seek_Error_Rate 0x000b 200 200 051 Pre-fail Always - 0
9 Power_On_Hours 0x0032 038 038 000 Old_age Always - 45395
10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 3651
196 Reallocated_Event_Count 0x0032 199 199 000 Old_age Always - 1
197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0012 200 200 000 Old_age Always - 0
199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 67
200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 0

SMART Error Log Version: 1
ATA Error Count: 175 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 175 occurred at disk power-on lifetime: 917 hours (38 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 10 09 73 e0 Error: UNC 8 sectors at LBA = 0x00730910 = 7538960

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 0f 09 73 e0 00 00:03:33.050 READ DMA
c8 00 08 0f 09 73 e0 00 00:03:29.550 READ DMA
c8 00 08 27 82 1f e0 00 00:03:29.500 READ DMA
c8 00 08 77 82 1f e0 00 00:03:29.500 READ DMA
c8 00 08 87 82 1f e0 00 00:03:29.500 READ DMA

Error 174 occurred at disk power-on lifetime: 917 hours (38 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 10 09 73 e0 Error: UNC 8 sectors at LBA = 0x00730910 = 7538960

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 0f 09 73 e0 00 00:03:29.550 READ DMA
c8 00 08 27 82 1f e0 00 00:03:29.500 READ DMA
c8 00 08 77 82 1f e0 00 00:03:29.500 READ DMA
c8 00 08 87 82 1f e0 00 00:03:29.500 READ DMA
c8 00 08 7f 82 1f e0 00 00:03:29.500 READ DMA

Error 173 occurred at disk power-on lifetime: 917 hours (38 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 10 09 73 e0 Error: UNC 8 sectors at LBA = 0x00730910 = 7538960

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 0f 09 73 e0 00 00:03:26.000 READ DMA
c8 00 08 0f 09 73 e0 00 00:03:22.750 READ DMA
c8 00 08 27 82 1f e0 00 00:03:22.700 READ DMA
c8 00 08 77 82 1f e0 00 00:03:22.700 READ DMA
c8 00 08 87 82 1f e0 00 00:03:22.700 READ DMA

Error 172 occurred at disk power-on lifetime: 917 hours (38 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 10 09 73 e0 Error: UNC 8 sectors at LBA = 0x00730910 = 7538960

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 0f 09 73 e0 00 00:03:22.750 READ DMA
c8 00 08 27 82 1f e0 00 00:03:22.700 READ DMA
c8 00 08 77 82 1f e0 00 00:03:22.700 READ DMA
c8 00 08 87 82 1f e0 00 00:03:22.700 READ DMA
c8 00 08 7f 82 1f e0 00 00:03:22.700 READ DMA

Error 171 occurred at disk power-on lifetime: 917 hours (38 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 10 09 73 e0 Error: UNC 8 sectors at LBA = 0x00730910 = 7538960

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 0f 09 73 e0 00 00:02:58.850 READ DMA
c8 00 08 0f 09 73 e0 00 00:02:58.850 READ DMA
c8 00 08 27 82 1f e0 00 00:02:55.550 READ DMA
c8 00 08 77 82 1f e0 00 00:02:55.550 READ DMA
c8 00 08 87 82 1f e0 00 00:02:55.550 READ DMA

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 585 -
# 2 Extended offline Completed without error 00% 207 -

Selective Self-tests/Logging not supported

space2: ~ # smartctl -a /dev/ada2
smartctl 6.2 2013-07-26 r3841 [FreeBSD 9.2-RELEASE-p3 i386] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family: IBM/Hitachi Deskstar 120GXP
Device Model: IC35L020AVVN07-0
Serial Number: VNP110B1G4E1PB
Firmware Version: VA1OAG0A
User Capacity: 20,576,747,520 bytes [20.5 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-5 T13/1321D revision 1
Local Time is: Wed Aug 8 12:23:49 2018 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 622) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 10) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 060 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 125 125 024 Pre-fail Always - 148 (Average 115)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 583
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 020 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 088 088 000 Old_age Always - 84742
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 490
192 Power-Off_Retract_Count 0x0032 097 097 050 Old_age Always - 3720
193 Load_Cycle_Count 0x0012 097 097 050 Old_age Always - 3720
194 Temperature_Celsius 0x0002 098 098 000 Old_age Always - 56 (Min/Max 15/74)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0

SMART Error Log Version: 1
ATA Error Count: 1
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 1 occurred at disk power-on lifetime: 21990 hours (916 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 05 03 b1 10 e0 Error: UNC 5 sectors at LBA = 0x0010b103 = 1093891

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 00 b1 10 e0 00 06:48:11.700 READ DMA
ca 00 08 48 4a 34 e0 00 06:47:43.400 WRITE DMA
ca 00 08 c0 b0 0f e0 00 06:47:33.400 WRITE DMA
ca 00 08 30 9b 12 e0 00 06:47:33.400 WRITE DMA
ca 00 08 f0 c8 11 e0 00 06:47:33.400 WRITE DMA

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 19124 -
# 2 Extended offline Completed without error 00% 17817 -
# 3 Short offline Interrupted (host reset) 40% 37179 -
# 4 Short offline Completed without error 00% 37179 -

Selective Self-tests/Logging not supported

Und ada3 ist der Knaller mit den Laufstunden. :D
space2: ~ # smartctl -a /dev/ada3
smartctl 6.2 2013-07-26 r3841 [FreeBSD 9.2-RELEASE-p3 i386] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family: IBM/Hitachi Deskstar 120GXP
Device Model: IC35L040AVVA07-0
Serial Number: VNC204A2JG8WZA
Firmware Version: VA2OA51A
User Capacity: 40,020,664,320 bytes [40.0 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-5 T13/1321D revision 1
Local Time is: Wed Aug 8 12:24:16 2018 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 1177) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 20) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 060 Pre-fail Always - 0
2 Throughput_Performance 0x0005 145 145 050 Pre-fail Offline - 276
3 Spin_Up_Time 0x0007 104 104 024 Pre-fail Always - 158 (Average 157)
4 Start_Stop_Count 0x0012 099 099 000 Old_age Always - 5693
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 111 111 020 Pre-fail Offline - 43
9 Power_On_Hours 0x0012 087 087 000 Old_age Always - 92564
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 806
192 Power-Off_Retract_Count 0x0032 096 096 050 Old_age Always - 5693
193 Load_Cycle_Count 0x0012 096 096 050 Old_age Always - 5693
194 Temperature_Celsius 0x0002 127 127 000 Old_age Always - 43 (Min/Max 15/61)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 63

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 26946 -
# 2 Extended offline Completed without error 00% 25639 -
# 3 Short offline Completed without error 00% 41072 -
# 4 Short offline Completed without error 00% 21149 -
# 5 Short offline Completed without error 00% 21148 -
# 6 Short offline Completed without error 00% 0 -
# 7 Short captive Completed without error 00% 0 -

Selective Self-tests/Logging not supported
 
Zuletzt bearbeitet:

pit234a

Well-Known Member
#4
Habe eben mal nach meiner eigenen "alten Tante" gesehen. Der Rechner hat zwar nie so lange Uptimes, weil ich einmal im Jahr abschalte zum Staub saugen und außerdem häufiger mal ein Stromausfall dafür sorgt, dass er neu starten muss, aber eine der fünf Platten läuft dort auch schon seit Anfang durch. Ich erinner mich, dass sie mal 78000 nochwas an Stunden hatte, als ich sie eigentlich vorsorglich erneuern wollte. Damals war die letzte gestorben, die mit ihr zusammen eingebaut worden war.
Schließlich brachte ich es nicht über Herz und ließ sie verbaut, nur, um mal zu sehen, wann sie denn sterben würde.
Nun sehe ich nur noch
Code:
Power_On_Hours:             4261
Das kann definitiv nicht richtig sein.
Es ist eine
Code:
Seagate Barracuda 7200.11
ST31000340AS
Ist es möglich, dass der Stundenzähler bei 100.000 begrenzt ist und dann wieder neu anfängt?
 

Yamagi

Possessed With Psi Powers
Mitarbeiter
#5
Ja, bei älteren Platten und anderer Hardware laufen die Stundenzähler irgendwann über. Früher waren 2^32 Millisekunden (etwa 49 Tage) recht beliebt, aber irgendwann hat man das mal erhöht.
 

pit234a

Well-Known Member
#6
wenn ich nicht mehr mit dem Wert protzen kann, tausche ich sie dann vielleicht tatsächlich demnächst.
Danke.
 

mr44er

Well-Known Member
Themenstarter #7
818 Tage waren es vorhin dann geworden. Mal sehen, ob ich das nochmal mit ner Kiste hinbekomme.
Die Daten wurden erfolgreich davon kopiert (man hörte von mind. einer Platte quietschige Motoraussetzer, lief aber immer wieder an und ZFS meldete keine Lesefehler). Danach hab ich noch eine Zigarette geraucht und arg mitleidig 'init 0' abgefeuert. :rolleyes:

Ja, bei älteren Platten und anderer Hardware laufen die Stundenzähler irgendwann über.
Da hat der Hersteller wohl kein Vertrauen in sein Produkt wie bei nem 5-stelligen Autotacho oder die Späße, wo nach 299.999 wieder genullt wurde. :D

wenn ich nicht mehr mit dem Wert protzen kann, tausche ich sie dann vielleicht tatsächlich demnächst.
Lass laufen. Du weißt doch, dass der Tacho nicht manipuliert wurde. :p
 
Zuletzt bearbeitet: