BSD Hardware Support - Der dmesg Thread

darktrym

darktrym

Fahnenträger
Weil ich gerade wieder eine Nachricht bekommen habe nach dem Support meiner Hardware und ich dazu keinen passenden Thread gefunden habe, mache ich mal einen auf. Hier kommen dmesg's und sonst. Hardware Support Infos seitens BSD rein.

Ich fange mal an, mein Thinkpad X220i mit NetBSD 7.99.3(25.12):
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.

NetBSD 7.99.3 (GENERIC.201412251810Z) #0: Thu Dec 25 18:56:44 UTC 2014
snj@b45.netbsd.org:/home/builds/ab/HEAD/amd64/201412251810Z-obj/home/source/ab/HEAD/src/sys/arch/amd64/compile/GENERIC
total memory = 6027 MB
avail memory = 5833 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
LENOVO 4290W1A (ThinkPad X220)
mainbus0 (root)
ACPI: RSDP 0x00000000000F00E0 000024 (v02 LENOVO)
ACPI: XSDT 0x00000000DAFFE120 0000A4 (v01 LENOVO TP-8D 00001390 PTEC 00000002)
ACPI: FACP 0x00000000DAFE7000 0000F4 (v04 LENOVO TP-8D 00001390 PTL 00000002)
ACPI: DSDT 0x00000000DAFEA000 00FA89 (v01 LENOVO TP-8D 00001390 INTL 20061109)
ACPI: FACS 0x00000000DAF2D000 000040
ACPI: SLIC 0x00000000DAFFD000 000176 (v01 LENOVO TP-8D 00001390 PTEC 00000001)
ACPI: SSDT 0x00000000DAFFC000 000249 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109)
ACPI: SSDT 0x00000000DAFFB000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109)
ACPI: SSDT 0x00000000DAFFA000 0007D1 (v01 LENOVO SataAhci 00001000 INTL 20061109)
ACPI: HPET 0x00000000DAFE6000 000038 (v01 LENOVO TP-8D 00001390 PTL 00000002)
ACPI: APIC 0x00000000DAFE5000 000098 (v01 LENOVO TP-8D 00001390 PTL 00000002)
ACPI: MCFG 0x00000000DAFE4000 00003C (v01 LENOVO TP-8D 00001390 PTL 00000002)
ACPI: ECDT 0x00000000DAFE3000 000052 (v01 LENOVO TP-8D 00001390 PTL 00000002)
ACPI: ASF! 0x00000000DAFE9000 0000A5 (v32 LENOVO TP-8D 00001390 PTL 00000002)
ACPI: TCPA 0x00000000DAFE2000 000032 (v02 PTL LENOVO 06040000 LNVO 00000001)
ACPI: SSDT 0x00000000DAFE1000 000B2F (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
ACPI: SSDT 0x00000000DAFE0000 000996 (v01 PmRef CpuPm 00003000 INTL 20061109)
ACPI: UEFI 0x00000000DAFDF000 00003E (v01 LENOVO TP-8D 00001390 PTL 00000002)
ACPI: UEFI 0x00000000DAFDE000 000042 (v01 PTL COMBUF 00000001 PTL 00000001)
ACPI: UEFI 0x00000000DAFDD000 000292 (v01 LENOVO TP-8D 00001390 PTL 00000002)
ACPI: All ACPI Tables successfully acquired
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz, id 0x206a7
cpu1 at mainbus0 apid 1
cpu1: Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz, id 0x206a7
cpu2 at mainbus0 apid 2
cpu2: Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz, id 0x206a7
cpu3 at mainbus0 apid 3
cpu3: Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz, id 0x206a7
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20140926
acpi0: X/RSDT: OemId <LENOVO,TP-8D ,00001390>, AslId <PTEC,00000002>
acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE810ACBD010 0008C0 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE810ACAEC10 000303 (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE810ABF5090 000119 (v01 PmRef ApCst 00003000 INTL 20061109)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0
MEM (PNP0C01) at acpi0 not configured
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpivga0 at acpi0 (VID): ACPI Display Adapter
acpiout0 at acpivga0 (LCD0, 0x0400): ACPI Display Output Device
acpiout0: brightness levels: [5,10,20,25,30,35,40,45,50,55,60,65,70,80,90,100]
acpiout1 at acpivga0 (CRT0, 0x0100): ACPI Display Output Device
acpiout2 at acpivga0 (DVI0, 0x0300): ACPI Display Output Device
acpiout3 at acpivga0 (DVI1, 0x0301): ACPI Display Output Device
acpiout4 at acpivga0 (DVI2, 0x0302): ACPI Display Output Device
acpiout5 at acpivga0 (DVI3, 0x0303): ACPI Display Output Device
acpiout6 at acpivga0 (DVI4, 0x0304): ACPI Display Output Device
acpiout7 at acpivga0 (DVI5, 0x0305): ACPI Display Output Device
acpivga0: unknown output device acpiout1
acpivga0: unknown output device acpiout2
acpivga0: unknown output device acpiout3
acpivga0: unknown output device acpiout4
acpivga0: unknown output device acpiout5
acpivga0: unknown output device acpiout6
acpivga0: unknown output device acpiout7
acpivga0: connected output devices:
acpivga0: 0x0400 (acpiout0): Unknown Output Device, head 0
SIO (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOU, LEN0020) (aux port): irq 12
TPM (SMO1200) at acpi0 not configured
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery
acpibat0: LGC LION rechargeable battery
acpibat0: granularity: low->warn 0.001 Wh, warn->full 0.001 Wh
acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
thinkpad0 at acpi0 (HKEY, LEN0068)
acpiwmi0 at acpi0 (WMI1, PNP0C14-1): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
acpiwmi1 at acpi0 (WMI2, PNP0C14-2): ACPI WMI Interface
acpiwmibus at acpiwmi1 not configured
acpitz0 at acpi0 (THM0)
acpitz0: levels: critical 99.0 C, passive cooling
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-646)
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 0104 (rev. 0x09)
i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product 0116 (rev. 0x09)
drm: Memory usable by graphics device = 2048M
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
i915drmkms0: interrupting at ioapic0 pin 16 (i915)
drm: Wrong MCH_SSKPD value: 0x17050407
drm: This can cause pipe underruns and display issues.
drm: Please upgrade your BIOS to fix this.
drm: GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
intelfb0 at i915drmkms0
i915drmkms0: info: registered panic notifier
intelfb0: framebuffer at 0xffff80006a546000, size 1366x768, depth 32, stride 5504
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
vendor 8086 product 1c3a (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured
wm0 at pci0 dev 25 function 0: PCH2 LAN (82579LM) Controller (rev. 0x04)
wm0: interrupting at ioapic0 pin 20
wm0: PCI-Express bus
wm0: 2048 words FLASH
wm0: Ethernet address f0:de:f1:5b:b8:34
ihphy0 at wm0 phy 2: i82579 10/100/1000 media interface, rev. 3
ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ehci0 at pci0 dev 26 function 0: vendor 8086 product 1c2d (rev. 0x04)
ehci0: interrupting at ioapic0 pin 16
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 22
hdafg0 at hdaudio0: vendor 14f1 product 506e
hdafg0: DAC00 2ch: Speaker [Built-In]
hdafg0: DAC01 2ch: HP Out [Jack]
hdafg0: ADC02 2ch: Mic In [Jack]
hdafg0: ADC03 2ch: Mic In [Built-In]
hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
hdafg1 at hdaudio0: vendor 8086 product 2805
hdafg1: DP00 8ch: Digital Out [Jack]
hdafg1: DP01 8ch: Digital Out [Jack]
hdafg1: DP02 8ch: Digital Out [Jack]
hdafg1: 8ch/0ch 48000Hz PCM16*
ppb0 at pci0 dev 28 function 0: vendor 8086 product 1c10 (rev. 0xb4)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: vendor 8086 product 1c12 (rev. 0xb4)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb1: link is x1 @ 2.5GT/s
pci2 at ppb1 bus 3
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
iwn0 at pci2 dev 0 function 0: vendor 8086 product 0085 (rev. 0x34)
iwn0: interrupting at ioapic0 pin 17
iwn0: MIMO 2T2R, MoW, address a0:88:b4:3f:f2:e8
iwn0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ppb2 at pci0 dev 28 function 3: vendor 8086 product 1c16 (rev. 0xb4)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci3 at ppb2 bus 5
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 28 function 4: vendor 8086 product 1c18 (rev. 0xb4)
ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb3: link is x1 @ 2.5GT/s
pci4 at ppb3 bus 13
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
sdhc0 at pci4 dev 0 function 0: vendor 1180 product e823 (rev. 0x04)
sdhc0: interrupting at ioapic0 pin 16
sdhc0: SD Host Specification 3.0, rev.5
sdhc0: using DMA transfer
sdmmc0 at sdhc0 slot 0
ehci1 at pci0 dev 29 function 0: vendor 8086 product 1c26 (rev. 0x04)
ehci1: interrupting at ioapic0 pin 23
ehci1: EHCI version 1.0
usb1 at ehci1: USB revision 2.0
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 1c4f (rev. 0x04)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
ichlpcib0: can't map general purpose i/o space
ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 1c03 (rev. 0x04)
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xff30ff65<SXS,EMS,PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SALP,SSS,SMPS,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 4
ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 1c22 (rev. 0x04)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7: device 0x0000104a rev 0x4e
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: I/O, lat 80 us, pow 500 mW
acpicpu0: C3: I/O, lat 109 us, pow 200 mW
acpicpu0: P0: FFH, lat 10 us, pow 35000 mW, 2100 MHz
acpicpu0: P1: FFH, lat 10 us, pow 32872 mW, 2000 MHz
acpicpu0: P2: FFH, lat 10 us, pow 30785 mW, 1900 MHz
acpicpu0: P3: FFH, lat 10 us, pow 28741 mW, 1800 MHz
acpicpu0: P4: FFH, lat 10 us, pow 26737 mW, 1700 MHz
acpicpu0: P5: FFH, lat 10 us, pow 25105 mW, 1600 MHz
acpicpu0: P6: FFH, lat 10 us, pow 23184 mW, 1500 MHz
acpicpu0: P7: FFH, lat 10 us, pow 21297 mW, 1400 MHz
acpicpu0: P8: FFH, lat 10 us, pow 19451 mW, 1300 MHz
acpicpu0: P9: FFH, lat 10 us, pow 17959 mW, 1200 MHz
acpicpu0: P10: FFH, lat 10 us, pow 16187 mW, 1100 MHz
acpicpu0: P11: FFH, lat 10 us, pow 14458 mW, 1000 MHz
acpicpu0: P12: FFH, lat 10 us, pow 12763 mW, 900 MHz
acpicpu0: P13: FFH, lat 10 us, pow 11406 mW, 800 MHz
acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
coretemp0 at cpu0: thermal sensor, 1 C resolution
acpicpu1 at cpu1: ACPI CPU
acpicpu2 at cpu2: ACPI CPU
coretemp1 at cpu2: thermal sensor, 1 C resolution
acpicpu3 at cpu3: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2093377650 Hz quality 3000
acpiacad0: AC adapter offline.
IPsec: Initialized Security Association Processing.
uhub0 at usb0: vendor 8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1 at usb1: vendor 8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ahcisata0 port 0: device present, speed: 6.0Gb/s
drm: Enabling RC6 states: RC6 on, RC6p off, RC6pp off
wd0 at atabus0 drive 0
wd0: <HGST HTS725050A7E630>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
uhub2 at uhub0 port 1: vendor 8087 product 0024, class 9/0, rev 2.00/0.00, addr 2
uhub2: single transaction translator
uhub3 at uhub1 port 1: vendor 8087 product 0024, class 9/0, rev 2.00/0.00, addr 2
uhub3: single transaction translator
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
ugen0 at uhub2 port 3
ugen0: UPEK Biometric Coprocessor, rev 1.01/0.02, addr 3
uvideo0 at uhub2 port 6 configuration 1 interface 0: Chicony Electronics Co., Ltd. Integrated Camera, rev 2.00/8.54, addr 4
video0 at uvideo0: Chicony Electronics Co., Ltd. Integrated Camera, rev 2.00/8.54, addr 4
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/amd64/7.99.3/modules
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)
drm: GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
drm: GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
drm: GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6
Zum Vergrößern anklicken....

Für mich fühlt sich so an als ob die Grafikbeschleunigung funktioniert und die Konsole läuft im Framebuffer rasend schnell. Glxinfo meldet ja, glxgears ca. 60fps.
 
Mein Heimserver...
AMD FX-8350
Asus M5A99FX PRO R2.0
IBM M1015, crossflashed
Nvidia Quadro Grafik (das Board bootet nicht ohne Grafik, zumindest hab ichs nicht geschafft)

Funktioniert ganz gut, smb lesen wirespeed, smb sync schreiben ~37MB/s (ich vermute das ist ok). Und ja, die Konfig ist alles andere als optimal für nen Heimserver, aber die Sachen sind nunmal da und ich war bisher zu faul, die bei Ebay reinzustellen. Und der Verkaufsthread hier hat nix gebracht. :)


Code: 
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.1-RELEASE #0 r274401: Tue Nov 11 21:02:49 UTC 2014
    root@releng1.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
VT: running with driver "efifb".
CPU: AMD FX(tm)-8350 Eight-Core Processor            (4013.55-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x600f20  Family = 0x15  Model = 0x2  Stepping = 0
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C>
  AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
  AMD Features2=0x1ebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC>
  Structured Extended Features=0x8<BMI1>
  TSC: P-state invariant, performance statistics
real memory  = 18236833792 (17392 MB)
avail memory = 16483115008 (15719 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 8 core(s)
cpu0 (BSP): APIC ID: 16
cpu1 (AP): APIC ID: 17
cpu2 (AP): APIC ID: 18
cpu3 (AP): APIC ID: 19
cpu4 (AP): APIC ID: 20
cpu5 (AP): APIC ID: 21
cpu6 (AP): APIC ID: 22
cpu7 (AP): APIC ID: 23
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20130823/tbfadt-630)
ioapic0 <Version 2.1> irqs 0-23 on motherboard
ioapic1 <Version 2.1> irqs 24-55 on motherboard
kbd1 at kbdmux0
random: <Software, Yarrow> initialized
module_register_init: MOD_LOAD (vesa, 0xffffffff80d942e0, 0) error 19
acpi0: <ALASKA A M I> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 350
Event timer "HPET2" frequency 14318180 Hz quality 350
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_ec0: <Embedded Controller: GPE 0xa> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 52 at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
mps0: <LSI SAS2008> port 0xe000-0xe0ff mem 0xfe5c0000-0xfe5c3fff,0xfe580000-0xfe5bffff irq 24 at device 0.0 on pci1
mps0: Firmware: 19.00.00.00, Driver: 19.00.00.00-fbsd
mps0: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
pcib2: <ACPI PCI-PCI bridge> irq 52 at device 4.0 on pci0
pci2: <ACPI PCI bus> on pcib2
vgapci0: <VGA-compatible display> port 0xd000-0xd07f mem 0xfd000000-0xfdffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff irq 44 at device 0.0 on pci2
vgapci0: Boot video device
hdac0: <NVIDIA (0x0e1b) HDA Controller> mem 0xfe080000-0xfe083fff irq 45 at device 0.1 on pci2
pcib3: <ACPI PCI-PCI bridge> irq 54 at device 10.0 on pci0
pci3: <ACPI PCI bus> on pcib3
em0: <Intel(R) PRO/1000 Network Connection 7.4.2> port 0xc000-0xc01f mem 0xfe4c0000-0xfe4dffff,0xfe400000-0xfe47ffff,0xfe4e0000-0xfe4e3fff irq 47 at device 0.0 on pci3
em0: Using MSIX interrupts with 3 vectors
em0: Ethernet address: 00:1b:21:a6:f9:8d
pcib4: <ACPI PCI-PCI bridge> irq 54 at device 11.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 54 at device 13.0 on pci0
pci5: <ACPI PCI bus> on pcib5
em1: <Intel(R) PRO/1000 Network Connection 7.4.2> port 0xb000-0xb01f mem 0xfe340000-0xfe35ffff,0xfe320000-0xfe33ffff irq 40 at device 0.0 on pci5
em1: Using an MSI interrupt
em1: Ethernet address: 00:1b:21:04:7f:89
ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xf040-0xf047,0xf030-0xf033,0xf020-0xf027,0xf010-0xf013,0xf000-0xf00f mem 0xfe607000-0xfe6073ff irq 19 at device 17.0 on pci0
ahci0: AHCI v1.20 with 3 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe606000-0xfe606fff irq 18 at device 18.0 on pci0
usbus0 on ohci0
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe605000-0xfe6050ff irq 17 at device 18.2 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe604000-0xfe604fff irq 20 at device 19.0 on pci0
usbus2 on ohci1
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe603000-0xfe6030ff irq 21 at device 19.2 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci1
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib6: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci6: <ACPI PCI bus> on pcib6
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe602000-0xfe602fff irq 18 at device 20.5 on pci0
usbus4 on ohci2
pcib7: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pci7: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 21.1 on pci0
pci8: <ACPI PCI bus> on pcib8
xhci0: <ASMedia ASM1042 USB 3.0 controller> mem 0xfe200000-0xfe207fff irq 21 at device 0.0 on pci8
xhci0: 32 byte context size.
usbus5 on xhci0
pcib9: <ACPI PCI-PCI bridge> at device 21.2 on pci0
pci9: <ACPI PCI bus> on pcib9
xhci1: <ASMedia ASM1042 USB 3.0 controller> mem 0xfe100000-0xfe107fff irq 22 at device 0.0 on pci9
xhci1: 32 byte context size.
usbus6 on xhci1
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe601000-0xfe601fff irq 22 at device 22.0 on pci0
usbus7 on ohci3
ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe600000-0xfe6000ff irq 23 at device 22.2 on pci0
usbus8: EHCI version 1.0
usbus8 on ehci2
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xce7ff,0xce800-0xcf7ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
acpi_throttle2: <ACPI CPU Throttling> on cpu2
acpi_throttle2: failed to attach P_CNT
device_attach: acpi_throttle2 attach returned 6
acpi_throttle3: <ACPI CPU Throttling> on cpu3
acpi_throttle3: failed to attach P_CNT
device_attach: acpi_throttle3 attach returned 6
acpi_throttle4: <ACPI CPU Throttling> on cpu4
acpi_throttle4: failed to attach P_CNT
device_attach: acpi_throttle4 attach returned 6
acpi_throttle5: <ACPI CPU Throttling> on cpu5
acpi_throttle5: failed to attach P_CNT
device_attach: acpi_throttle5 attach returned 6
acpi_throttle6: <ACPI CPU Throttling> on cpu6
acpi_throttle6: failed to attach P_CNT
device_attach: acpi_throttle6 attach returned 6
acpi_throttle7: <ACPI CPU Throttling> on cpu7
acpi_throttle7: failed to attach P_CNT
device_attach: acpi_throttle7 attach returned 6
random: unblocking device.
usbus0: 12Mbps Full Speed USB v1.0
Timecounters tick every 1.000 msec
usbus1: 480Mbps High Speed USB v2.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
ugen0.1: <ATI> at usbus0
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <ATI> at usbus1
uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen2.1: <ATI> at usbus2
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <ATI> at usbus3
uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <ATI> at usbus4
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
usbus5: 5.0Gbps Super Speed USB v3.0
usbus6: 5.0Gbps Super Speed USB v3.0
usbus7: 12Mbps Full Speed USB v1.0
usbus8: 480Mbps High Speed USB v2.0
ugen5.1: <0x1b21> at usbus5
uhub5: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus5
ugen6.1: <0x1b21> at usbus6
uhub6: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus6
ugen7.1: <ATI> at usbus7
uhub7: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7
ugen8.1: <ATI> at usbus8
uhub8: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus8
hdacc0: <NVIDIA (0x0042) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x0042) Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA (0x0042) (HDMI/DP 8ch)> at nid 4 on hdaa0
pcm1: <NVIDIA (0x0042) (HDMI/DP 8ch)> at nid 5 on hdaa0
uhub4: 2 ports with 2 removable, self powered
uhub2: 5 ports with 5 removable, self powered
uhub0: 5 ports with 5 removable, self powered
uhub7: 4 ports with 4 removable, self powered
uhub5: 4 ports with 4 removable, self powered
uhub6: 4 ports with 4 removable, self powered
uhub8: 4 ports with 4 removable, self powered
uhub1: 5 ports with 5 removable, self powered
uhub3: 5 ports with 5 removable, self powered
ada0 at ahcich0 bus 0 scbus1 target 0 lun 0
ada0: <Samsung SSD 840 PRO Series DXM06B0Q> ATA-9 SATA 3.x device
ada0: Serial Number S12RNEACB00288J
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 244198MB (500118192 512 byte sectors: 16H 63S/T 16383C)
ada0: quirks=0x1<4K>
ada0: Previously was known as ad4
ada1 at ahcich2 bus 0 scbus2 target 0 lun 0
ada1: <Hitachi HUS724040ALE640 MJAOA3B0> ATA-8 SATA 3.x device
ada1: Serial Number PK2331PAG5KHJT
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 3815446MB (7814035055 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad6
da0 at mps0 bus 0 scbus0 target 4 lun 0
da0: <ATA WDC WD1000DHTZ-0 6A00> Fixed Direct Access SCSI-6 device
da0: 600.000MB/s transfers
da0: Command Queueing enabled
da0: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
da2 at mps0 bus 0 scbus0 target 6 lun 0
da1 at mps0 bus 0 scbus0 target 5 lun 0
da2: <ATA WDC WD1000CHTZ-0 6A00> Fixed Direct Access SCSI-6 device
da2: 600.000MB/s transfers
da2: Command Queueing enabled
da2: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
da1: <ATA WDC WD1000CHTZ-0 6A00> Fixed Direct Access SCSI-6 device
da1: 600.000MB/s transfers
da1: Command Queueing enabled
da1: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
da3 at mps0 bus 0 scbus0 target 7 lun 0
da3: <ATA WDC WD1000CHTZ-0 6A00> Fixed Direct Access SCSI-6 device
da3: 600.000MB/s transfers
da3: Command Queueing enabled
da3: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
da4 at mps0 bus 0 scbus0 target 9 lun 0
da4: <ATA WDC WD1000DHTZ-1 6A00> Fixed Direct Access SCSI-6 device
da4: 600.000MB/s transfers
da4: Command Queueing enabled
da4: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
SMP: AP CPU #1 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #7 Launched!
Timecounter "TSC-low" frequency 2006776255 Hz quality 1000
Trying to mount root from ufs:/dev/ada0p2 [rw]...
em0: link state changed to UP
lagg0: link state changed to UP
em1: link state changed to UP
cryptosoft0: <software crypto> on motherboard
GEOM_ELI: Device da0p1.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI:     Crypto: software
GEOM_ELI: Device da1p1.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI:     Crypto: software
GEOM_ELI: Device da2p1.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI:     Crypto: software
GEOM_ELI: Device da3p1.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI:     Crypto: software
GEOM_ELI: Device da4p1.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI:     Crypto: software
GEOM_ELI: Device ada1p1.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI:     Crypto: software
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
 
Auch interessant: dmesgd der NYC*BUG. Die bieten das seit 2004 an, und haben schon ein paar mehr dmesg's gesammelt wie wir hier im Forum ;)
 
Ich finde es immer ganz interessant vor dem Kauf von Hardware eine dmesg zu sehen. Daher mein neuer Core i7-6700K auf einem Gigabyte GA-Z710XP-SLI:

Code: 
Copyright (c) 1992-2015 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
   The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.2-RELEASE #0 r286743M: Fri Aug 14 20:11:35 CEST 2015
  root@:/usr/obj/usr/src/sys/PINE amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
VT: running with driver "efifb".
CPU: Intel(R) Core(TM) i7-6700K CPU @ 4.00GHz (4008.15-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x506e3  Family=0x6  Model=0x5e  Stepping=3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,<b11>,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features=0x29c6fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 34359738368 (32768 MB)
avail memory = 33211101184 (31672 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID:  0
cpu1 (AP): APIC ID:  1
cpu2 (AP): APIC ID:  2
cpu3 (AP): APIC ID:  3
cpu4 (AP): APIC ID:  4
cpu5 (AP): APIC ID:  5
cpu6 (AP): APIC ID:  6
cpu7 (AP): APIC ID:  7
ioapic0 <Version 2.0> irqs 0-119 on motherboard
Cuse4BSD v0.1.36 @ /dev/cuse
Hardware, VIA Nehemiah Padlock RNG: VIA Padlock RNG not present
random: <Software, Yarrow> initialized
kbd1 at kbdmux0
aesni0: <AES-CBC,AES-XTS> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <ALASKA A M I > on motherboard
ACPI Error: [\134_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20150515/dswload-219)
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20150515/psobject-233)
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 24000000 Hz quality 950
Event timer "HPET" frequency 24000000 Hz quality 550
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xde000000-0xdeffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff irq 16 at device 0.0 on pci1
nvidia0: <GeForce GTX 750 Ti> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: Boot video device
hdac0: <NVIDIA (0x0fbc) HDA Controller> mem 0xdf080000-0xdf083fff irq 17 at device 0.1 on pci1
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xdf330000-0xdf33ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0: waiting for BIOS to give up control
usbus0 on xhci0
pci0: <simple comms> at device 22.0 (no driver attached)
ahci0: <AHCI SATA controller> port 0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xdf348000-0xdf349fff,0xdf34c000-0xdf34c0ff,0xdf34b000-0xdf34b7ff irq 16 at device 23.0 on pci0
ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 27.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 27.2 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 0.0 on pci3
pci4: <ACPI PCI bus> on pcib4
pcm0: <Envy24HT audio (AudioTrak Prodigy HD2)> port 0xd080-0xd09f,0xd000-0xd07f irq 19 at device 1.0 on pci4
pcm0: system configuration
  SubVendorID: 0x3137, SubDeviceID: 0x4154
  XIN2 Clock Source: 49.152MHz(192kHz*256)
  MPU-401 UART(s) #: 1
  ADC #: 1 and SPDIF receiver connected
  DAC #: 1
  Multi-track converter type: I2S(192KHz support, 24bit resolution, ID#0x0)
  S/PDIF(IN/OUT): 1/1 ID# 0x00
  GPIO(mask/dir/state): 0xfff8ff/0xdfffff/0x200700
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci5: <ACPI PCI bus> on pcib5
xhci1: <XHCI (generic) USB 3.0 controller> mem 0xdf200000-0xdf207fff irq 16 at device 0.0 on pci5
xhci1: 32 bytes context size, 64-bit DMA
usbus1 on xhci1
pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0
pci7: <ACPI PCI bus> on pcib7
ahci1: <AHCI SATA controller> mem 0xdf100000-0xdf101fff irq 16 at device 0.0 on pci7
ahci1: AHCI v1.30 with 1 6Gbps ports, Port Multiplier not supported
ahcich6: <AHCI channel> at channel 0 on ahci1
pcib8: <ACPI PCI-PCI bridge> irq 16 at device 29.4 on pci0
pci8: <ACPI PCI bus> on pcib8
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
pci0: <memory> at device 31.2 (no driver attached)
hdac1: <Intel (0xa170) HDA Controller> mem 0xdf340000-0xdf343fff,0xdf320000-0xdf32ffff irq 16 at device 31.3 on pci0
em0: <Intel(R) PRO/1000 Network Connection 7.5.2> mem 0xdf300000-0xdf31ffff irq 16 at device 31.6 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: 40:8d:5c:1d:67:27
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
coretemp4: <CPU On-Die Thermal Sensors> on cpu4
est4: <Enhanced SpeedStep Frequency Control> on cpu4
coretemp5: <CPU On-Die Thermal Sensors> on cpu5
est5: <Enhanced SpeedStep Frequency Control> on cpu5
coretemp6: <CPU On-Die Thermal Sensors> on cpu6
est6: <Enhanced SpeedStep Frequency Control> on cpu6
coretemp7: <CPU On-Die Thermal Sensors> on cpu7
est7: <Enhanced SpeedStep Frequency Control> on cpu7
random: unblocking device.
usbus0: 5.0Gbps Super Speed USB v3.0
fuse-freebsd: version 0.4.4, FUSE ABI 7.8
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
hdacc0: <NVIDIA (0x0060) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x0060) Audio Function Group> at nid 1 on hdacc0
pcm1: <NVIDIA (0x0060) (HDMI/DP 8ch)> at nid 4 on hdaa0
pcm2: <NVIDIA (0x0060) (HDMI/DP 8ch)> at nid 5 on hdaa0
pcm3: <NVIDIA (0x0060) (HDMI/DP 8ch)> at nid 7 on hdaa0
hdacc1: <Realtek (0x0900) HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek (0x0900) Audio Function Group> at nid 1 on hdacc1
pcm4: <Realtek (0x0900) (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1
pcm5: <Realtek (0x0900) (Front Analog)> at nid 27 and 25 on hdaa1
pcm6: <Realtek (0x0900) (Onboard Digital)> at nid 17 on hdaa1
usbus1: 5.0Gbps Super Speed USB v3.0
ugen0.1: <0x8086> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <0x1b21> at usbus1
uhub1: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <INTEL SSDSA2CW120G3 4PC10362> ATA8-ACS SATA 2.x device
cd1 at ahcich4 bus 0 scbus4 target 0 lun 0
cd1: <TSSTcorp DVDWBD SH-B123L SB04> Removable CD-ROM SCSI device
cd1: Serial Number R8606GEB909038
cd0 at ahcich3 bus 0 scbus3 target 0 lun 0
cd1: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd1: Attempt to query device size failed: NOT READY, Medium not present - tray closed
cd0: <HL-DT-ST DVDRAM GH22NS50 TN02> Removable CD-ROM SCSI device
cd0: Serial Number K1V9AR62256
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
ada0: Serial Number CVPR1202000A120LGN
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 114473MB (234441648 512 byte sectors: 16H 63S/T 16383C)
ada0: quirks=0x1<4K>
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <HGST HDN724040ALE640 MJAOA5E0> ATA8-ACS SATA 3.x device
ada1: Serial Number PK2334PCG6Z09B
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 3815447MB (7814037168 512 byte sectors: 16H 63S/T 16383C)
ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
ada2: <HGST HDN724040ALE640 MJAOA5E0> ATA8-ACS SATA 3.x device
ada2: Serial Number PK2334PCG52WSB
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 3815447MB (7814037168 512 byte sectors: 16H 63S/T 16383C)
ada3 at ahcich6 bus 0 scbus7 target 0 lun 0
ada3: <SAMSUNG MZHPV256HDGL-00000 BXW2500Q> ACS-2 ATA SATA 3.x device
ada3: Serial Number S1X2NYAG505214
ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada3: Command Queueing enabled
ada3: 244198MB (500118192 512 byte sectors: 16H 63S/T 16383C)
ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
uhub1: 4 ports with 4 removable, self powered
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #6 Launched!
Timecounter "TSC-low" frequency 2004074013 Hz quality 1000
Root mount waiting for: usbus0
uhub0: 26 ports with 26 removable, self powered
Root mount waiting for: usbus0
ugen0.2: <vendor 0x05e3> at usbus0
uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 1> on usbus0
uhub2: MTT enabled
uhub2: 2 ports with 2 removable, self powered
Root mount waiting for: usbus0
ugen0.3: <vendor 0x04d9> at usbus0
ukbd0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/1.01, addr 2> on usbus0
kbd2 at ukbd0
ums0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/1.01, addr 2> on usbus0
Root mount waiting for: usbus0
ugen0.4: <Microsoft> at usbus0
ums1: <Microsoft Microsoft Basic Optical Mouse v2.0, class 0/0, rev 1.10/1.04, addr 3> on usbus0
ums1: 3 buttons and [XYZ] coordinates ID=0
Trying to mount root from ufs:/dev/gpt/root [rw]...

Klassischer BIOS-Boot ist auf dem Board eine Qual. FreeBSDs /boot/loader ist grottenlahm, der gute GRUB gibt erst eine Unmenge Fehler, kommt dann aber. UEFI-Boot funktioniert allerdings problemlos, man braucht aber auf FreeBSD 10.2 diesen Patch: http://deponie.yamagi.org/freebsd/patches/skylake_10.2/efifb_late_init.patch

Derzeit läuft das FreeBSD mit Intels offiziellen e1000-Kernelmodul, da FreeBSDs Variante noch keine Unterstützung für die Sunrise-Point NICs hat. Die müsste allerdings in den nächsten Wochen kommen.

Dazu die CPUID:

Code: 
x in    eax      ebx      ecx      edx
00000000 00000016 756e6547 6c65746e 49656e69
00000001 000506e3 05100800 7ffafbbf bfebfbff
00000002 76036301 00f0b5ff 00000000 00c30000
00000003 00000000 00000000 00000000 00000000
00000004 1c004121 01c0003f 0000003f 00000000
00000005 00000040 00000040 00000003 00142120
00000006 000007f7 00000002 00000001 00000000
00000007 00000000 029c6fbb 00000000 00000000
00000008 00000000 00000000 00000000 00000000
00000009 00000000 00000000 00000000 00000000
0000000a 07300404 00000000 00000000 00000603
0000000b 00000001 00000002 00000100 00000005
0000000c 00000000 00000000 00000000 00000000
0000000d 0000001f 00000440 00000440 00000000
0000000e 00000000 00000000 00000000 00000000
0000000f 00000000 00000000 00000000 00000000
00000010 00000000 00000000 00000000 00000000
00000011 00000000 00000000 00000000 00000000
00000012 00000000 00000000 00000000 00000000
00000013 00000000 00000000 00000000 00000000
00000014 00000001 0000000f 00000007 00000000
00000015 00000002 0000014e 00000000 00000000
00000016 00000fa0 00001068 00000064 00000000
80000000 80000008 00000000 00000000 00000000
80000001 00000000 00000000 00000121 2c100800
80000002 65746e49 2952286c 726f4320 4d542865
80000003 37692029 3037362d 43204b30 40205550
80000004 302e3420 7a484730 00000000 00000000
80000005 00000000 00000000 00000000 00000000
80000006 00000000 00000000 01006040 00000000
80000007 00000000 00000000 00000000 00000100
80000008 00003027 00000000 00000000 00000000

Vendor ID: "GenuineIntel"; CPUID level 22

Intel-specific functions:
Version 000506e3:
Type 0 - Original OEM
Family 6 - Pentium Pro
Model 94 -
Stepping 3
Reserved 0

Extended brand string: "Intel(R) Core(TM) i7-6700K CPU @ 4.00GHz"
CLFLUSH instruction cache line size: 8
Initial APIC ID: 5
Hyper threading siblings: 16

Feature flags set 1 (CPUID.01H:EDX): bfebfbff:
FPU    Floating Point Unit
VME    Virtual 8086 Mode Enhancements
DE     Debugging Extensions
PSE    Page Size Extensions
TSC    Time Stamp Counter
MSR    Model Specific Registers
PAE    Physical Address Extension
MCE    Machine Check Exception
CX8    COMPXCHG8B Instruction
APIC   On-chip Advanced Programmable Interrupt Controller present and
enabled
SEP    Fast System Call
MTRR   Memory Type Range Registers
PGE    PTE Global Flag
MCA    Machine Check Architecture
CMOV   Conditional Move and Compare Instructions
FGPAT  Page Attribute Table
PSE-36 36-bit Page Size Extension
CLFSH  CFLUSH instruction
DS     Debug store
ACPI   Thermal Monitor and Clock Ctrl
MMX    MMX instruction set
FXSR   Fast FP/MMX Streaming SIMD Extensions save/restore
SSE    Streaming SIMD Extensions instruction set
SSE2   SSE2 extensions
SS     Self Snoop
HT     Hyper Threading
TM     Thermal monitor
31     Pending Break Enable

Feature flags set 2 (CPUID.01H:ECX): 7ffafbbf:
SSE3     SSE3 extensions
PCLMULDQ PCLMULDQ instruction
DTES64   64-bit debug store
MONITOR  MONITOR/MWAIT instructions
DS-CPL   CPL Qualified Debug Store
VMX      Virtual Machine Extensions
EST      Enhanced Intel SpeedStep Technology
TM2      Thermal Monitor 2
SSSE3    Supplemental Streaming SIMD Extension 3
11 - unknown feature
FMA      Fused Multiply-Add
CX16     CMPXCHG16B
xTPR     Send Task Priority messages
PDCM     Perfmon and debug capability
PCID     Process-Context Identifiers
SSE4.1   Streaming SIMD Extension 4.1
SSE4.2   Streaming SIMD Extension 4.2
x2APIC   Extended xAPIC support
MOVBE    MOVBE instruction
POPCNT   POPCNT instruction
TSC-Deadline
AESNI    AES Instruction set
XSAVE    XSAVE/XSTOR states
OSXSAVE  OS-enabled extended state managerment
AVX      AVX extensions
F16C     Half-precision conversions
RDRAND   RDRAND Instruction

Extended feature flags set 1 (CPUID.80000001H:EDX): 2c100800
SYSCALL   SYSCALL/SYSRET instructions
XD-bit    Execution Disable bit
1GBP      1 GByte pages are available
RDTSCP    RDTSCP and IA32_TSC_AUX are available
EM64T     Intel Extended Memory 64 Technology

Extended feature flags set 2 (CPUID.80000001H:ECX): 00000121
LAHF      LAHF/SAHF available in IA-32e mode
5 - unknown feature
8 - unknown feature

Old-styled TLB and cache info:
63: unknown TLB/cache descriptor
03: Data TLB: 4KB pages, 4-way set assoc, 64 entries
76: Instruction TLB: 2M/4M pages, fully associative, 8 entries
ff: CPUID leaf 2 does not report full information, query leaf 4
b5: unknown TLB/cache descriptor
f0: 64-byte prefetching
c3: unknown TLB/cache descriptor

Processor serial: [von oben zensiert]

Deterministic Cache Parameters:
index=0: eax=1c004121 ebx=01c0003f ecx=0000003f edx=00000000
> Data cache, level 1, self initializing
> 64 sets, 8 ways, 1 partitions, line size 64
> full size 32768 bytes
> shared between up to 2 threads
> NB this package has up to 8 threads
index=1: eax=1c004122 ebx=01c0003f ecx=0000003f edx=00000000
> Instruction cache, level 1, self initializing
> 64 sets, 8 ways, 1 partitions, line size 64
> full size 32768 bytes
> shared between up to 2 threads
index=2: eax=1c004143 ebx=00c0003f ecx=000003ff edx=00000000
> Unified cache, level 2, self initializing
> 1024 sets, 4 ways, 1 partitions, line size 64
> full size 262144 bytes
> shared between up to 2 threads
index=3: eax=1c03c163 ebx=03c0003f ecx=00001fff edx=00000006
> Unified cache, level 3, self initializing
> 8192 sets, 16 ways, 1 partitions, line size 64
> full size 8388608 bytes
> shared between up to 16 threads

Structured feature flags CPUID.07H.00H:EBX: 029c6fbb:
FSGSBASE
IA32_TSC_ADJUST MSR
BMI1
HLE
AVX2
SMEP
BMI2
Enhanced REP MOVSB/STOSB
INVPCID
RTM
Deprecates FPU CS and FPU DS
14 - unknown feature
18 - unknown feature
19 - unknown feature
20 - unknown feature
23 - unknown feature
25 - unknown feature

Und zum Schluss noch meine wenig professionelle Leistungseinschätzung einmal in Kopie:
Code: 
Happy: Core i7-2600K "Sandy Bridge" (4 Kerne @ 3,4GHz)
Pine:  Core i7-6700K "Skylake" (4 Kerne @ 4,0GHz)

Vorweg:
- Alle Angaben beziehen sich auf das Gesamtsystem. Das ist gerade
  bei den Verbrauchsangaben relevant. In beiden Systemen steckt
  eine Geforce GTX 750TI, die mit ca. 40W zu Buche schlägte. Falls
  Nvidia mitliest: Ein brauchbarer Powersave-Modi bei komplexeren
  Multimonitor-Setups wäre im Jahr 2015 schon schön. Selbst Intel
  bekommt das hin. In Happy steckt ein 80-Plus Bronze Netzteil von
  2007, in Pine ein passiv gekühltes 80-Plus Platinum Netzteil von
  2015. Happy hatte 16GB DDR3-1333 RAM, Pine hat 32GB DDR4-2133
  RAM.
- Der Taktunterschied zwischen den beiden CPUs besträgt 15%.
- Die Benchmarks sind "falsch", da sie bei eingeschalteten Power-
  management im unter X11 laufenden System durchgeführt wurden.
  Es ging allerdings auch nur im das Abbilden der Dimensionen.


Happy:
------

- Idle: ~85W
- Last: ~155W
- Buildkernel: 3:59
- Buildworld: 22:04

- pigz src.tar: 0:11
- gunzip src.tar: 0:07
- pixz src.tar: 2:39
- unxz src.tar: 0:24

- libx264 "slow", 5 minuten full-hd 2-pass: 10:36


Pine:
-----

- Idle: ~70W
- Last: ~130W

- Buildkernel: 1:41
- Buildworld: 13:03

- pigz src.tar: 0:09
- gunzip src.tar: 0:06
- pixz src.tar: 2:03
- unxz src.tar: 0:19

- libx264 "slow", 5 minuten full-hd 2-pass: 6:16


Fazit:
- Pine mit der Skylake-CPU ist bedeutend energieeffizienter. Das
  Gesamtsystem verbraucht idle 15W weniger als Happy, unter Last
  sind es sogar 25W. Das bei einer gleichzeitig deutlich höheren
  Leistung.
- Bei hochoptimiertem Code, wo sich Generationen an mehr oder weniger
  fähigen Programmieren ausgetobt haben, ist der Unterschied zwischen
  beiden CPUs gering. Sowohl bei pigz und pixz berägt der Unterschied
  fast nur die Taktdifferenz. Bei pigz sind es immerhin noch ~3,5%
  darüber hinaus, bei pixz so gut wie nichts.
- Klassicher Code ohne umfangreiche Optimierungen gewinnt schon mehr.
  FreeBSDs "make buildworld" 40%, das io-lastigere "make buildkernel"
  sogar ~60%. beide Läufe wurden auf einem tmpfs durchgeführt, hier
  spielt vielleicht der deutlich schnellere DDR4-RAM mit hinein. Man
  munkelt ja auch, dass Skylake einen deutlich breiten Ringbus hat,
  der hier auch punkten könnte.
- Die deutlich bessere AVX-Engine von Skylake kann bei libx264 mal
  richtig die Musklen spielen lassen. 41% Mehrleistung sich auch
  hier recht beeindruckend.

=> Die DAU-Gazetten waren nur wenig angetan, da Skylake angeblich zu
   wenig Mehrleistung bringt und den spätestens seit Sandy Bridge
   diagnostizierten "Stillstand" fortsetzt. Das Gam0r-Gesocks stimmt
   dann gleich ein, die Meinung ist, dass man schon Core 2 Quad kaum
   aufrüsten muss und Sandy Bridge sowie Ivy Bridges erst recht nicht.
   Wenn man nur hochoptimierte Software, wie z.B. das in Benchmarks
   oft genutzte WinRAR oder den dämlichen Cinebench nutzt, mag das
   für Sandy Bridge stimmen. Ebenso für die meisten Spiele, die eh
   nicht am CPU-Limit hängen. Wer aber ernsthaftet arbeitet, kann
   schon nennenswert gewinnen. Zudem sollte man die beeindruckende
   Energieeffizienz im Auge behalten. Natürlich müsste man für ein
   komplettes Bild weitere Benchmarks durchführen und auch die laut
   Intel verbesserte Virtualisierungsunterstützung ist interessant.

Ach ja, da es für einige vielleicht interessant ist: Die verbaute Almost-PCI-Brücke ist zumindest gut genug, dass eine Audiotrack Prodigy HD2 Soundkarte einwandfrei funktioniert. Und die hat schon gerne mal Zicken gemacht.
 
Zuletzt bearbeitet:
Mir rollen sich ja immer so ein bisschen die Fußnägel hoch bei den Speicherdichten, die heutzutage mit ungepufferten RAM-Modulen gefahren werden.

Deswegen mal ne grundlegende Frage: Ist das mit den neuen RAM-Generationen komplett verschwunden, dass man ungepuffert nur kleine Speichermengen mit möglichst wenig Modulen realisieren soll? Bei 32GB ungepuffertem RAM sträubt sich irgendwas in mir. :)
 
Ich hätte gern den Maximalausbau von 64 Gigabyte auf 4 Modulen genommen, aber leider sind "dumme" Module mit 16GB noch unbezahlbar, sofern man sie überhaupt aufgetrieben bekommt. Da haben die Desktop-Varianten des Sockel 2011v3 den Vorteil von 4 Speicherkanälen und damit 8 Modulen.

Kommt halt auch stark drauf an, was man damit machen will. Auf dem Desktop wäre zumindest ECC zwar schön zu haben, aber das bedeutet dann gleich einen Xeon mit einem entsprechenden Board. Das ist oft deutlich teurer, schlechter ausgestattet und so weiter. Außerdem, sofern Intel überhaupt eine 4GHz-Variante als Xeon bringt, wird die höchstwahrscheinlich einen brutalen "Topmodellaufschlag" haben. Daher unter dem Strich mal wieder: Kein Spaß ohne Risiko.

Irgendwelche Dinge, bei denen es auf Datenkonsistenz ankommt, werde ich damit aber auch nicht rechnen. Dann lieber echte Serverhardware mit ECC und voll gepuffert.
 
Nette Thread-Idee - hier mal unsere Standard-Firewall in den Colocations:

http://www.supermicro.com/products/system/1U/5017/SYS-5017R-WRF.cfm +
http://www.supermicro.com/products/accessories/addon/AOC-CGP-i2.cfm

Code: 
OpenBSD 5.5 (GENERIC.MP) #315: Wed Mar  5 09:37:46 MST 2014
  deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 12859211776 (12263MB)
avail mem = 12508291072 (11928MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0x99c00 (81 entries)
bios0: vendor American Megatrends Inc. version "2.1c" date 08/03/2012
bios0: Supermicro X8DTU
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT FACP APIC MCFG SLIT OEMB HPET DMAR SSDT EINJ BERT ERST HEST
acpi0: wakeup devices NPE1(S4) NPE2(S4) NPE3(S4) NPE4(S4) NPE5(S4) NPE6(S4) NPE7(S4) NPE8(S4) NPE9(S4) NPEA(S4) P0P1(S4) USB0(S4) USB1(S4) USB2(S4) USB5(S4) EUSB(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 2880.46 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,NXE,LONG,LAHF,PERF,ITSC
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 133MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.0, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 2400.08 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,NXE,LONG,LAHF,PERF,ITSC
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 18 (application processor)
cpu2: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 2400.09 MHz
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,NXE,LONG,LAHF,PERF,ITSC
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 9, package 0
cpu3 at mainbus0: apid 20 (application processor)
cpu3: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 2400.08 MHz
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,NXE,LONG,LAHF,PERF,ITSC
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 10, package 0
cpu4 at mainbus0: apid 1 (application processor)
cpu4: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 2400.08 MHz
cpu4: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,NXE,LONG,LAHF,PERF,ITSC
cpu4: 256KB 64b/line 8-way L2 cache
cpu4: smt 1, core 0, package 0
cpu5 at mainbus0: apid 3 (application processor)
cpu5: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 2400.08 MHz
cpu5: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,NXE,LONG,LAHF,PERF,ITSC
cpu5: 256KB 64b/line 8-way L2 cache
cpu5: smt 1, core 1, package 0
cpu6 at mainbus0: apid 19 (application processor)
cpu6: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 2400.08 MHz
cpu6: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,NXE,LONG,LAHF,PERF,ITSC
cpu6: 256KB 64b/line 8-way L2 cache
cpu6: smt 1, core 9, package 0
cpu7 at mainbus0: apid 21 (application processor)
cpu7: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 2400.08 MHz
cpu7: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,NXE,LONG,LAHF,PERF,ITSC
cpu7: 256KB 64b/line 8-way L2 cache
cpu7: smt 1, core 10, package 0
ioapic0 at mainbus0: apid 6 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 4, remapped to apid 6
ioapic1 at mainbus0: apid 7 pa 0xfec8a000, version 20, 24 pins
ioapic1: misconfigured as apic 6, remapped to apid 7
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (NPE1)
acpiprt2 at acpi0: bus 2 (NPE3)
acpiprt3 at acpi0: bus -1 (NPE4)
acpiprt4 at acpi0: bus 3 (NPE5)
acpiprt5 at acpi0: bus -1 (NPE6)
acpiprt6 at acpi0: bus 4 (NPE7)
acpiprt7 at acpi0: bus -1 (NPE8)
acpiprt8 at acpi0: bus 5 (NPE9)
acpiprt9 at acpi0: bus -1 (NPEA)
acpiprt10 at acpi0: bus 6 (P0P1)
acpiprt11 at acpi0: bus -1 (P0P4)
acpiprt12 at acpi0: bus -1 (P0P5)
acpiprt13 at acpi0: bus -1 (P0P6)
acpiprt14 at acpi0: bus -1 (P0P7)
acpiprt15 at acpi0: bus -1 (P0P8)
acpiprt16 at acpi0: bus -1 (P0P9)
acpicpu0 at acpi0: PSS
acpicpu1 at acpi0: PSS
acpicpu2 at acpi0: PSS
acpicpu3 at acpi0: PSS
acpicpu4 at acpi0: PSS
acpicpu5 at acpi0: PSS
acpicpu6 at acpi0: PSS
acpicpu7 at acpi0: PSS
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
ipmi at mainbus0 not configured
cpu0: Enhanced SpeedStep 2880 MHz: speeds: 2401, 2400, 2267, 2133, 2000, 1867, 1733, 1600 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 5520 Host" rev 0x22
ppb0 at pci0 dev 1 function 0 "Intel X58 PCIE" rev 0x22: msi
pci1 at ppb0 bus 1
em0 at pci1 dev 0 function 0 "Intel 82576" rev 0x01: msi, address 0c:c4:7a:14:00:54
em1 at pci1 dev 0 function 1 "Intel 82576" rev 0x01: msi, address 0c:c4:7a:14:00:55
ppb1 at pci0 dev 3 function 0 "Intel X58 PCIE" rev 0x22: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 5 function 0 "Intel X58 PCIE" rev 0x22: msi
pci3 at ppb2 bus 3
em2 at pci3 dev 0 function 0 "Intel 82576" rev 0x01: msi, address 0c:c4:7a:17:0d:16
em3 at pci3 dev 0 function 1 "Intel 82576" rev 0x01: msi, address 0c:c4:7a:17:0d:17
ppb3 at pci0 dev 7 function 0 "Intel X58 PCIE" rev 0x22: msi
pci4 at ppb3 bus 4
ppb4 at pci0 dev 9 function 0 "Intel X58 PCIE" rev 0x22: msi
pci5 at ppb4 bus 5
"Intel X58 IOxAPIC" rev 0x22 at pci0 dev 19 function 0 not configured
"Intel X58 Misc" rev 0x22 at pci0 dev 20 function 0 not configured
"Intel X58 GPIO" rev 0x22 at pci0 dev 20 function 1 not configured
"Intel X58 RAS" rev 0x22 at pci0 dev 20 function 2 not configured
"Intel X58 Throttle" rev 0x22 at pci0 dev 20 function 3 not configured
"Intel X58 QuickData" rev 0x22 at pci0 dev 22 function 0 not configured
"Intel X58 QuickData" rev 0x22 at pci0 dev 22 function 1 not configured
"Intel X58 QuickData" rev 0x22 at pci0 dev 22 function 2 not configured
"Intel X58 QuickData" rev 0x22 at pci0 dev 22 function 3 not configured
"Intel X58 QuickData" rev 0x22 at pci0 dev 22 function 4 not configured
"Intel X58 QuickData" rev 0x22 at pci0 dev 22 function 5 not configured
"Intel X58 QuickData" rev 0x22 at pci0 dev 22 function 6 not configured
"Intel X58 QuickData" rev 0x22 at pci0 dev 22 function 7 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801JI USB" rev 0x00: apic 6 int 16
uhci1 at pci0 dev 26 function 1 "Intel 82801JI USB" rev 0x00: apic 6 int 21
uhci2 at pci0 dev 26 function 2 "Intel 82801JI USB" rev 0x00: apic 6 int 19
ehci0 at pci0 dev 26 function 7 "Intel 82801JI USB" rev 0x00: apic 6 int 18
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
uhci3 at pci0 dev 29 function 0 "Intel 82801JI USB" rev 0x00: apic 6 int 23
uhci4 at pci0 dev 29 function 1 "Intel 82801JI USB" rev 0x00: apic 6 int 19
uhci5 at pci0 dev 29 function 2 "Intel 82801JI USB" rev 0x00: apic 6 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801JI USB" rev 0x00: apic 6 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x90
pci6 at ppb5 bus 6
vga1 at pci6 dev 1 function 0 "Matrox MGA G200eW" rev 0x0a
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 "Intel 82801JIR LPC" rev 0x00
ahci0 at pci0 dev 31 function 2 "Intel 82801JI AHCI" rev 0x00: msi, AHCI 1.2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, SanDisk SD6SB1M1, X231> SCSI3 0/direct fixed naa.5001b44e35d08e98
sd0: 122104MB, 512 bytes/sector, 250069680 sectors, thin
sd1 at scsibus0 targ 1 lun 0: <ATA, SanDisk SD6SB1M1, X231> SCSI3 0/direct fixed naa.5001b44e35d08ff7
sd1: 122104MB, 512 bytes/sector, 250069680 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 82801JI SMBus" rev 0x00: apic 6 int 18
iic0 at ichiic0
iic0: addr 0x2e 00=40 words 00=4040 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
nvt0 at iic0 addr 0x2f: W83795ADG
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: W83627DHG-P rev 0x73
lm1 at wbsio0 port 0xa10/8: W83627DHG
umass0 at uhub1 port 5 configuration 1 interface 0 "Genesys Logic USB Storage" rev 2.00/0.16 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
cd0 at scsibus1 targ 1 lun 0: <TEAC, DV-28S-A, 9.2A> SCSI0 5/cdrom removable serial.05e30719000000000033
uhidev0 at uhub3 port 1 configuration 1 interface 0 "American Megatrends Inc. Virtual Keyboard and Mouse" rev 1.10/1.00 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub3 port 1 configuration 1 interface 1 "American Megatrends Inc. Virtual Keyboard and Mouse" rev 1.10/1.00 addr 2
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd2 at scsibus3 targ 1 lun 0: <OPENBSD, SR RAID 1, 005> SCSI2 0/direct fixed
sd2: 122103MB, 512 bytes/sector, 250067198 sectors
root on sd2a (f153e6eae036884f.a) swap on sd2b dump on sd2b

ipmi(4) habe ich noch nicht enabled; das kommt beim naechsten vor Ort Termin mal mit dran.
 
Weil er 2.4GHz als "Modellbezeichnung" hat, aber in "turbo" mit 2880MHz rumkommt? Ehrlich gesagt habe ich keine Ahnung und hat mich bisher auch nicht gejuckt. ;)
 
Naja, spezifiziert ist der im Turbo nur bis 2.66GHz. Edit: Und selbst dann sieht man den Turbo AFAIK nicht im OS.

Habt ihr mal geguckt, ob die Firewall zufällig ein Plexiglasfenster, Wasserkühlung und interne LED-Beleuchtung gekriegt hat? Vielleicht habt ihr euch ein Overclocker-Kiddie eingetreten. .-)
 
Hier noch ein paar ganz alte vom Heimserver vom Initialtest (2012). Mittlerweile mit E5-2630v2 und 64GB RAM und ESXi, deswegen wären heute nur virtuelle dmesgs verfügbar. :>

sm3.jpg

Code: 
OpenBSD 5.1-current (RAMDISK_CD) #37: Tue Apr 17 22:52:13 MDT 2012
    deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 34329862144 (32739MB)
avail mem = 33396002816 (31848MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xeb2f0 (132 entries)
bios0: vendor American Megatrends Inc. version "4.6.5" date 02/08/2012
bios0: Supermicro X9DR3-F
acpi0 at bios0: rev 2
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC HPET SPMI SSDT MCFG DMAR EINJ ERST HEST BERT
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E5-2609 0 @ 2.40GHz, 2400.32 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,AES,XSAVE,AVX,NXE,LONG,LAHF
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: apic clock running at 100MHz
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0: apid 2 pa 0xfec01000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 9 (BR20)
acpiprt2 at acpi0: bus -1 (PEX0)
acpiprt3 at acpi0: bus -1 (PEX1)
acpiprt4 at acpi0: bus -1 (PEX2)
acpiprt5 at acpi0: bus -1 (PEX3)
acpiprt6 at acpi0: bus -1 (PEX4)
acpiprt7 at acpi0: bus -1 (PEX5)
acpiprt8 at acpi0: bus -1 (PEX6)
acpiprt9 at acpi0: bus -1 (PEX7)
acpiprt10 at acpi0: bus -1 (BR33)
acpiprt11 at acpi0: bus 1 (NPE1)
acpiprt12 at acpi0: bus 2 (BR2D)
acpiprt13 at acpi0: bus 3 (BR32)
acpiprt14 at acpi0: bus 4 (NPE2)
acpiprt15 at acpi0: bus 6 (NPE3)
acpiprt16 at acpi0: bus -1 (NPE5)
acpiprt17 at acpi0: bus 7 (NPE7)
acpiprt18 at acpi0: bus 8 (NPE9)
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel E5 Host" rev 0x07
ppb0 at pci0 dev 1 function 0 "Intel E5 PCIE" rev 0x07: msi
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 vendor "Intel", unknown product 0x1d74 rev 0x06
pci2 at ppb1 bus 2
ppb2 at pci2 dev 8 function 0 vendor "Intel", unknown product 0x1d3f rev 0x06
pci3 at ppb2 bus 3
vendor "Intel", unknown product 0x1d68 (class mass storage subclass SAS, rev 0x06) at pci3 dev 0 function 0 not configured
vendor "Intel", unknown product 0x1d70 (class serial bus subclass SMBus, rev 0x06) at pci3 dev 0 function 3 not configured
vendor "Intel", unknown product 0x1d71 (class serial bus subclass SMBus, rev 0x06) at pci3 dev 0 function 4 not configured
ppb3 at pci0 dev 1 function 1 "Intel E5 PCIE" rev 0x07: msi
pci4 at ppb3 bus 4
"Intel I350" rev 0x01 at pci4 dev 0 function 0 not configured
"Intel I350" rev 0x01 at pci4 dev 0 function 1 not configured
ppb4 at pci0 dev 2 function 0 "Intel E5 PCIE" rev 0x07: msi
pci5 at ppb4 bus 6
ppb5 at pci0 dev 3 function 0 "Intel E5 PCIE" rev 0x07: msi
pci6 at ppb5 bus 7
mpii0 at pci6 dev 0 function 0 "Symbios Logic SAS2008" rev 0x03: msi
scsibus0 at mpii0: 256 targets
ppb6 at pci0 dev 3 function 2 "Intel E5 PCIE" rev 0x07: msi
pci7 at ppb6 bus 8
vendor "Intel", unknown product 0x3c20 (class system subclass miscellaneous, rev 0x07) at pci0 dev 4 function 0 not configured
vendor "Intel", unknown product 0x3c21 (class system subclass miscellaneous, rev 0x07) at pci0 dev 4 function 1 not configured
vendor "Intel", unknown product 0x3c22 (class system subclass miscellaneous, rev 0x07) at pci0 dev 4 function 2 not configured
vendor "Intel", unknown product 0x3c23 (class system subclass miscellaneous, rev 0x07) at pci0 dev 4 function 3 not configured
vendor "Intel", unknown product 0x3c24 (class system subclass miscellaneous, rev 0x07) at pci0 dev 4 function 4 not configured
vendor "Intel", unknown product 0x3c25 (class system subclass miscellaneous, rev 0x07) at pci0 dev 4 function 5 not configured
vendor "Intel", unknown product 0x3c26 (class system subclass miscellaneous, rev 0x07) at pci0 dev 4 function 6 not configured
vendor "Intel", unknown product 0x3c27 (class system subclass miscellaneous, rev 0x07) at pci0 dev 4 function 7 not configured
"Intel E5 Address Map" rev 0x07 at pci0 dev 5 function 0 not configured
"Intel E5 Error Reporting" rev 0x07 at pci0 dev 5 function 2 not configured
vendor "Intel", unknown product 0x3c2c (class system subclass interrupt, rev 0x07) at pci0 dev 5 function 4 not configured
"Intel C600 MEI" rev 0x05 at pci0 dev 22 function 0 not configured
"Intel C600 MEI" rev 0x05 at pci0 dev 22 function 1 not configured
ehci0 at pci0 dev 26 function 0 "Intel C600 USB" rev 0x06: apic 0 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ehci1 at pci0 dev 29 function 0 "Intel C600 USB" rev 0x06: apic 0 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb7 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa6
pci8 at ppb7 bus 9
vga1 at pci8 dev 3 function 0 "Matrox MGA G200eW" rev 0x0a
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel C600 LPC" rev 0x06 at pci0 dev 31 function 0 not configured
ahci0 at pci0 dev 31 function 2 "Intel C600 AHCI" rev 0x06: msi, AHCI 1.3
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, ST31500341AS, CC1H> SCSI3 0/direct fixed naa.5000c5002a0bba29
sd0: 1430799MB, 512 bytes/sector, 2930277168 sectors
"Intel C600 SMBus" rev 0x06 at pci0 dev 31 function 3 not configured
"Intel C600 Thermal" rev 0x06 at pci0 dev 31 function 6 not configured
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
kbc: cmd word write error
uhub2 at uhub0 port 1 "vendor 0x8087 product 0x0024" rev 2.00/0.00 addr 2
umass0 at uhub2 port 5 configuration 1 interface 0 "vendor 0x0ea0 product 0x2222" rev 2.00/2.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <IPMI, Virtual Disk, 3000> SCSI0 0/direct removable
umass1 at uhub2 port 5 configuration 1 interface 1 "vendor 0x0ea0 product 0x2222" rev 2.00/2.00 addr 3
umass1: using ATAPI over Bulk-Only
scsibus3 at umass1: 2 targets, initiator 0
cd0 at scsibus3 targ 1 lun 0: <IPMI, Virtual CDROM, 3000> ATAPI 5/cdrom removable
uhidev0 at uhub2 port 6 configuration 1 interface 0 "Winbond Electronics Corp Hermon USB hidmouse Device" rev 1.10/0.01 addr 4
uhidev0: iclass 3/1
uhid at uhidev0 not configured
uhidev1 at uhub2 port 6 configuration 1 interface 1 "Winbond Electronics Corp Hermon USB hidmouse Device" rev 1.10/0.01 addr 4
uhidev1: iclass 3/1
ukbd0 at uhidev1
wskbd0 at ukbd0 mux 1
wskbd0: connecting to wsdisplay0
uhub3 at uhub1 port 1 "vendor 0x8087 product 0x0024" rev 2.00/0.00 addr 2
softraid0 at root
scsibus4 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b

Code: 
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.0_BETA (GENERIC)
total memory = 32740 MB
avail memory = 31775 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Supermicro X9DR3-F (1234567890)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel(R) Xeon(R) CPU E5-2609 0 @ 2.40GHz, id 0x206d7
cpu1 at mainbus0 apid 2: Intel(R) Xeon(R) CPU E5-2609 0 @ 2.40GHz, id 0x206d7
cpu2 at mainbus0 apid 4: Intel(R) Xeon(R) CPU E5-2609 0 @ 2.40GHz, id 0x206d7
cpu3 at mainbus0 apid 6: Intel(R) Xeon(R) CPU E5-2609 0 @ 2.40GHz, id 0x206d7
ioapic0 at mainbus0 apid 0: pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0 apid 2: pa 0xfec01000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <ALASKA,   A M I,01072009>, AslId <AMI ,00010013>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
IOH (PNP0C01) at acpi0 not configured
VTDR (PNP0C02) at acpi0 not configured
SIO2 (PNP0C02) at acpi0 not configured
UAR1 (PNP0501) at acpi0 not configured
UAR2 (PNP0501) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
RMSC (PNP0C02) at acpi0 not configured
SPMI (IPI0001) at acpi0 not configured
PCH (PNP0C01) at acpi0 not configured
CWDT (INT3F0D) at acpi0 not configured
IOH1 (PNP0C01) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
RMEM (PNP0C01) at acpi0 not configured
SCK0 (ACPI0004) at acpi0 not configured
OMSC (PNP0C02) at acpi0 not configured
attimer1: attached to pcppi1
ipmi0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x3c00 (rev. 0x07)
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x3c02 (rev. 0x07)
ppb0: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci1 dev 0 function 0: vendor 0x8086 product 0x1d74 (rev. 0x06)
ppb1: PCI Express 2.0 <Upstream Port of PCI-E Switch>
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci2 dev 8 function 0: vendor 0x8086 product 0x1d3f (rev. 0x06)
ppb2: PCI Express 2.0 <Downstream Port of PCI-E Switch>
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x8086 product 0x1d68 (SAS mass storage, revision 0x06) at pci3 dev 0 function 0 not configured
vendor 0x8086 product 0x1d70 (SMBus serial bus, revision 0x06) at pci3 dev 0 function 3 not configured
vendor 0x8086 product 0x1d71 (SMBus serial bus, revision 0x06) at pci3 dev 0 function 4 not configured
ppb3 at pci0 dev 1 function 1: vendor 0x8086 product 0x3c03 (rev. 0x07)
ppb3: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x8086 product 0x1521 (ethernet network, revision 0x01) at pci4 dev 0 function 0 not configured
vendor 0x8086 product 0x1521 (ethernet network, revision 0x01) at pci4 dev 0 function 1 not configured
ppb4 at pci0 dev 2 function 0: vendor 0x8086 product 0x3c04 (rev. 0x07)
ppb4: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci5 at ppb4 bus 6
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
ppb5 at pci0 dev 3 function 0: vendor 0x8086 product 0x3c08 (rev. 0x07)
ppb5: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci6 at ppb5 bus 7
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x1000 product 0x0072 (SAS mass storage, revision 0x03) at pci6 dev 0 function 0 not configured
ppb6 at pci0 dev 3 function 2: vendor 0x8086 product 0x3c0a (rev. 0x07)
ppb6: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci7 at ppb6 bus 8
pci7: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x8086 product 0x3c20 (miscellaneous system, revision 0x07) at pci0 dev 4 function 0 not configured
vendor 0x8086 product 0x3c21 (miscellaneous system, revision 0x07) at pci0 dev 4 function 1 not configured
vendor 0x8086 product 0x3c22 (miscellaneous system, revision 0x07) at pci0 dev 4 function 2 not configured
vendor 0x8086 product 0x3c23 (miscellaneous system, revision 0x07) at pci0 dev 4 function 3 not configured
vendor 0x8086 product 0x3c24 (miscellaneous system, revision 0x07) at pci0 dev 4 function 4 not configured
vendor 0x8086 product 0x3c25 (miscellaneous system, revision 0x07) at pci0 dev 4 function 5 not configured
vendor 0x8086 product 0x3c26 (miscellaneous system, revision 0x07) at pci0 dev 4 function 6 not configured
vendor 0x8086 product 0x3c27 (miscellaneous system, revision 0x07) at pci0 dev 4 function 7 not configured
vendor 0x8086 product 0x3c28 (miscellaneous system, revision 0x07) at pci0 dev 5 function 0 not configured
vendor 0x8086 product 0x3c2a (miscellaneous system, revision 0x07) at pci0 dev 5 function 2 not configured
vendor 0x8086 product 0x3c2c (interrupt system, interface 0x20, revision 0x07) at pci0 dev 5 function 4 not configured
vendor 0x8086 product 0x1d3a (miscellaneous communications, revision 0x05) at pci0 dev 22 function 0 not configured
vendor 0x8086 product 0x1d3b (miscellaneous communications, revision 0x05) at pci0 dev 22 function 1 not configured
ehci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x1d2d (rev. 0x06)
ehci0: interrupting at ioapic0 pin 16
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
ehci1 at pci0 dev 29 function 0: vendor 0x8086 product 0x1d26 (rev. 0x06)
ehci1: interrupting at ioapic0 pin 23
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
usb1 at ehci1: USB revision 2.0
ppb7 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xa6)
pci8 at ppb7 bus 9
pci8: i/o space, memory space enabled
vga0 at pci8 dev 3 function 0: vendor 0x102b product 0x0532 (rev. 0x0a)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
pcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x1d41 (rev. 0x06)
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x1d02 (rev. 0x06)
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xe730ff45<EMS,PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SALP,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 3
atabus4 at ahcisata0 channel 4
atabus5 at ahcisata0 channel 5
vendor 0x8086 product 0x1d22 (SMBus serial bus, revision 0x06) at pci0 dev 31 function 3 not configured
vendor 0x8086 product 0x1d24 (miscellaneous DASP, revision 0x06) at pci0 dev 31 function 6 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbc: cmd word write error
acpicpu0 at cpu0: ACPI CPU
acpicpu0: failed to evaluate _TSS: AE_LIMIT
acpicpu0: C1: FFH, lat   3 us, pow  1000 mW
acpicpu0: C2: FFH, lat  93 us, pow   350 mW
acpicpu0: P0: FFH, lat  10 us, pow 80000 mW, 2400 MHz
acpicpu0: P1: FFH, lat  10 us, pow 75136 mW, 2300 MHz
acpicpu0: P2: FFH, lat  10 us, pow 71149 mW, 2200 MHz
acpicpu0: P3: FFH, lat  10 us, pow 67240 mW, 2100 MHz
acpicpu0: P4: FFH, lat  10 us, pow 63406 mW, 2000 MHz
acpicpu0: P5: FFH, lat  10 us, pow 59648 mW, 1900 MHz
acpicpu0: P6: FFH, lat  10 us, pow 55977 mW, 1800 MHz
acpicpu0: P7: FFH, lat  10 us, pow 51631 mW, 1700 MHz
acpicpu0: P8: FFH, lat  10 us, pow 48104 mW, 1600 MHz
acpicpu0: P9: FFH, lat  10 us, pow 44650 mW, 1500 MHz
acpicpu0: P10: FFH, lat  10 us, pow 41269 mW, 1400 MHz
acpicpu0: P11: FFH, lat  10 us, pow 37968 mW, 1300 MHz
acpicpu0: P12: FFH, lat  10 us, pow 34730 mW, 1200 MHz
acpicpu0: T0: I/O, lat   1 us, pow     0 mW, 100 %
acpicpu0: T1: I/O, lat   1 us, pow     0 mW,  88 %
acpicpu0: T2: I/O, lat   1 us, pow     0 mW,  76 %
acpicpu0: T3: I/O, lat   1 us, pow     0 mW,  64 %
acpicpu0: T4: I/O, lat   1 us, pow     0 mW,  52 %
acpicpu0: T5: I/O, lat   1 us, pow     0 mW,  40 %
acpicpu0: T6: I/O, lat   1 us, pow     0 mW,  28 %
acpicpu0: T7: I/O, lat   1 us, pow     0 mW,  16 %
coretemp0 at cpu0: thermal sensor, 1 C resolution
acpicpu1 at cpu1: ACPI CPU
acpicpu1: failed to evaluate _TSS: AE_LIMIT
coretemp1 at cpu1: thermal sensor, 1 C resolution
acpicpu2 at cpu2: ACPI CPU
acpicpu2: failed to evaluate _TSS: AE_LIMIT
coretemp2 at cpu2: thermal sensor, 1 C resolution
acpicpu3 at cpu3: ACPI CPU
acpicpu3: failed to evaluate _TSS: AE_LIMIT
coretemp3 at cpu3: thermal sensor, 1 C resolution
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
uhub0 at usb0: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
wd0 at atabus0 drive 0
wd0: <ST31500341AS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 1397 GB, 2907021 cyl, 16 head, 63 sec, 512 bytes/sect x 2930277168 sectors
wd0: mbr partition exceeds disk size
wd0: GPT GUID: 690397bd-1ecf-4c6a-b43f-6ef23acb65fa
dk0 at wd0: EFI system partition
dk0: 204800 blocks at 2048, type: msdos
dk1 at wd0: Microsoft reserved partition
dk1: 262144 blocks at 206848, type:
dk2 at wd0: Basic data partition
dk2: 133750784 blocks at 468992, type:
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
uhub2 at uhub0 port 1: vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2
uhub2: single transaction translator
uhub3 at uhub1 port 1: vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2
uhub3: single transaction translator
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
umass0 at uhub2 port 5 configuration 1 interface 0
umass0: vendor 0x0ea0 product 0x2222, rev 2.00/2.00, addr 3
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
umass1 at uhub2 port 5 configuration 1 interface 1
umass1: vendor 0x0ea0 product 0x2222, rev 2.00/2.00, addr 3
umass1: using ATAPI over Bulk-Only
atapibus0 at umass1: 2 targets
sd0 at scsibus0 target 0 lun 0: <IPMI, Virtual Disk, 3000> disk removable
cd0 at atapibus0 drive 0: <IPMI, Virtual CDROM, 3000> cdrom removable
sd0: drive offline
sd0: unable to open device, error = 19
uhidev0 at uhub2 port 6 configuration 1 interface 0
uhidev0: Winbond Electronics Corp Hermon USB hidmouse Device, rev 1.10/0.01, addr 4, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub2 port 6 configuration 1 interface 1
uhidev1: Winbond Electronics Corp Hermon USB hidmouse Device, rev 1.10/0.01, addr 4, iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd0 at ukbd0 mux 1
wskbd0: connecting to wsdisplay0
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex, playback, capture
wd0: mbr partition exceeds disk size
wd0: mbr partition exceeds disk size
wd0: mbr partition exceeds disk size
wd0: mbr partition exceeds disk size
wd0: mbr partition exceeds disk size
wd0: mbr partition exceeds disk size
wd0: mbr partition exceeds disk size
wd0: mbr partition exceeds disk size
boot device: cd0
root on cd0a dumps on cd0b
root file system type: cd9660
warning: no /dev/console
ipmi0: version 2.0 interface KCS iobase 0xca2/2 spacing 1
 
NAS und diverse VMs halt. Der 2630v2 ist auch nur drin, weil ich den fast umsonst gekriegt hab, sonst wäre es wahrscheinlich ein kleinerer.
 
Dachte schon :) - So ne 700€ CPU in einem Heimserver ist auch für mich Verrückten mal was Neues :D

Gruß
Markus
 
Mein HauptPC mit dem ich auch recht viel Spiele -> Windows 8.1, bald Windows 10, mein Thinkpad T60 mit CoreDuo - Windows 7 und Gentoo aus Gründen.

Aber ich nutze auf dem Sofa gerne mein Thinkpad X31, zwar recht alt, aber ideal um nen bisschen zu chatten oder 2,3 nachrichten zu lesen. Das Format ist einfach Super, und es macht nichts wenn doch mal etwas passiert, z.B. wenn einer unserer Hunde zu wild rumtobt ;)
Für psy (Jabber) ist OpenBSD absolut okay, gebrowst wird mit Chromium oder dillo.
(Ich habe das gleiche Modell auch nochmal mit Gentoo, was noch etwas performanter läuft, aber das bauen von Updates e.t.c. dauert u.U. etwas :D )

Code: 
OpenBSD 5.7 (GENERIC) #738: Sun Mar  8 10:59:31 MDT 2015
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1400MHz ("GenuineIntel" 686-class) 1.40 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE,EST,TM2,PERF
real mem  = 2146320384 (2046MB)
avail mem = 2098892800 (2001MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 09/22/05, BIOS32 rev. 0 @ 0xfd750, SMBIOS rev. 2.33 @ 0xe0010 (57 entries)
bios0: vendor IBM version "1QET97WW (3.02 )" date 09/22/2005
bios0: IBM 2672C2G
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT ECDT TCPA BOOT
acpi0: wakeup devices LID_(S3) SLPB(S3) UART(S3) PCI0(S3) PCI1(S4) DOCK(S4) USB0(S3) USB1(S3) AC9M(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (AGP_)
acpiprt2 at acpi0: bus 2 (PCI1)
acpiprt3 at acpi0: bus -1 (DOCK)
acpicpu0 at acpi0: C3, C2, C1, PSS
acpipwrres0 at acpi0: PUBS, resource for USB0, USB1, USB7
acpitz0 at acpi0: critical temperature is 91 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "IBM-COMPATIBLE" serial 19454 type LION oem "PS"
acpibat1 at acpi0: BAT1 not present
acpibat2 at acpi0: BAT2 not present
acpiac0 at acpi0: AC unit offline
acpithinkpad0 at acpi0
acpidock0 at acpi0: GDCK not docked (0)
bios0: ROM list: 0xc0000/0x10000 0xdc000/0x4000! 0xe0000/0x10000
cpu0 at mainbus0: (uniprocessor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: Enhanced SpeedStep 1399 MHz: speeds: 1400, 1200, 1000, 800, 600 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82855PM Host" rev 0x03
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xd0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0 "Intel 82855PM AGP" rev 0x03
pci1 at ppb0 bus 1
radeondrm0 at pci1 dev 0 function 0 "ATI Radeon Mobility M6" rev 0x00
drm0 at radeondrm0
radeondrm0: irq 11
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 11
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 11
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x81
pci2 at ppb1 bus 2
2:0:0: mem address conflict 0xb0000000/0x1000
2:0:1: mem address conflict 0xb1000000/0x1000
cbb0 at pci2 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xaa: irq 11
cbb1 at pci2 dev 0 function 1 "Ricoh 5C476 CardBus" rev 0xaa: irq 11
"Ricoh 5C552 Firewire" rev 0x02 at pci2 dev 0 function 2 not configured
ath0 at pci2 dev 2 function 0 "Atheros AR5212" rev 0x01: irq 11
ath0: AR5213A 5.9 phy 4.3 rf5112a 3.6 eeprom 4.8, WOR0W, address 00:0b:6b:87:54:bf
fxp0 at pci2 dev 8 function 0 "Intel PRO/100 VE" rev 0x81, i82562: irq 11, address 00:0d:60:2c:d7:a8
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0xb0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 6 device 0 cacheline 0x0, lattimer 0xb0
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <SAMSUNG HM160HC>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 disabled (no drives)
ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x01: irq 11
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR SDRAM non-parity PC3200CL3.0
spdmem1 at iic0 addr 0x51: 1GB DDR SDRAM non-parity PC2700CL2.5
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x01: irq 11, ICH4 AC97
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
"Intel 82801DB Modem" rev 0x01 at pci0 dev 31 function 6 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt2 at isa0 port 0x3bc/4: polled
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (40727e9b3c2c8352.a) swap on wd0b dump on wd0b
radeondrm0: 1024x768
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)

Villeicht ja auch ganz interressant hier etwas ältere Hardware zu sehen - der post ist mit dem Chromium unter OpenBSD erstellt.
 
XMG U505 = Clevo P751ZM mit Nvidia GTX970M im UEFI Modus und von einem USB Stick gebootet. BIOS 1.05.01a macht mir Probleme weil ich während des Boot den Loader nicht sehe - nur schwarzer Bildschirm. Boot des kernels gibt dann aber wieder Ausgaben. Das Anpassen von Boot-Optionen oder Eingabe von GELI Passwörtern geht höchstens blind. USB Support muss mit Workaround kern.cam.boot_delay="20000" für Boot-Medien benutzt werden. Nvidia Treiber macht keine Probleme weil es ohne Optimus daher kommt. Sound klappt, bei WLAN habe ich ein nicht unterstütztes Modul verbaut.

Wenn jemand einen Tipp gegen den schwarzen Bildschirm hat (Loader), gebe ich meine volle Aufmerksamkeit.


Code: 
Copyright (c) 1993-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.3-RELEASE #0 r297264: Fri Mar 25 02:10:02 UTC 2016
    root@releng1.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
VT(efifb): resolution 800x600
CPU: Intel(R) Core(TM) i7-4790T CPU @ 2.70GHz (2693.81-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306c3  Family=0x6  Model=0x3c  Stepping=3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x21<LAHF,ABM>
  Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 34359738368 (32768 MB)
avail memory = 33250689024 (31710 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID:  0
cpu1 (AP): APIC ID:  1
cpu2 (AP): APIC ID:  2
cpu3 (AP): APIC ID:  3
cpu4 (AP): APIC ID:  4
cpu5 (AP): APIC ID:  5
cpu6 (AP): APIC ID:  6
cpu7 (AP): APIC ID:  7
random: <Software, Yarrow> initialized
ioapic0 <Version 2.0> irqs 0-23 on motherboard
module_register_init: MOD_LOAD (vesa, 0xffffffff80dc6500, 0) error 19
kbd1 at kbdmux0
acpi0: <ALASKA A M I> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xf6000000-0xf6ffffff,0xe0000000-0xefffffff,0xf0000000-0xf1ffffff at device 0.0 on pci1
nvidia0: <GeForce GTX 970M> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: Boot video device
hdac0: <NVIDIA (0x0fbb) HDA Controller> mem 0xf7080000-0xf7083fff at device 0.1 on pci1
xhci0: <Intel Wildcat Point USB 3.0 controller> mem 0xf7400000-0xf740ffff at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <Intel Wildcat Point USB 2.0 controller USB-B> mem 0xf7417000-0xf74173ff at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
hdac1: <Intel Wildcat Point HDA Controller> mem 0xf7410000-0xf7413fff at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
sdhci_pci0: <Generic SD HCI> mem 0xf7301000-0xf7301fff,0xf7300000-0xf7300fff at device 0.0 on pci3
sdhci_pci0: 1 slot(s) allocated
pcib4: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 0.0 on pci4
pci5: <ACPI PCI bus> on pcib5
pcib6: <PCI-PCI bridge> at device 3.0 on pci5
pci6: <PCI bus> on pcib6
pci6: <network> at device 0.0 (no driver attached)
pcib7: <PCI-PCI bridge> at device 7.0 on pci5
pci7: <PCI bus> on pcib7
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xf7100000-0xf7100fff,0xf2100000-0xf2103fff at device 0.0 on pci7
re0: Using 1 MSI-X message
re0: turning off MSI enable bit.
re0: Chip rev. 0x4c000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8251 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 80:fa:5b:0f:b8:35
ehci1: <Intel Wildcat Point USB 2.0 controller USB-A> mem 0xf7416000-0xf74163ff at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Wildcat Point AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xf7415000-0xf74157ff at device 31.2 on pci0
ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <NVIDIA (0x0071) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x0071) Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA (0x0071) (HDMI/DP 8ch)> at nid 4 on hdaa0
pcm1: <NVIDIA (0x0071) (HDMI/DP 8ch)> at nid 6 on hdaa0
pcm2: <NVIDIA (0x0071) (HDMI/DP 8ch)> at nid 7 on hdaa0
hdacc1: <Realtek ALC892 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc1
pcm3: <Realtek ALC892 (Analog)> at nid 20 and 24,26 on hdaa1
pcm4: <Realtek ALC892 (Analog)> at nid 23 and 18 on hdaa1
pcm5: <Realtek ALC892 (Rear Analog Headphones)> at nid 27 on hdaa1
pcm6: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa1
random: unblocking device.
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 480Mbps High Speed USB v2.0
ugen0.1: <0x8086> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub0: 21 ports with 21 removable, self powered
ugen0.2: <LITE-ON Technology> at usbus0
ukbd0: <EP1 Interrupt> on usbus0
kbd2 at ukbd0
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x8009, class 9/0, rev 2.00/0.00, addr 2> on usbus1
ugen2.2: <vendor 0x8087> at usbus2
uhub4: <vendor 0x8087 product 0x8001, class 9/0, rev 2.00/0.00, addr 2> on usbus2
uhub3: 6 ports with 6 removable, self powered
uhub4: 8 ports with 8 removable, self powered
ugen0.3: <EgisTec> at usbus0
ugen0.4: <vendor 0x093a> at usbus0
ugen0.5: <Realtek> at usbus0
uhub5: <Realtek USB3.0 Hub, class 9/0, rev 2.10/1.25, addr 4> on usbus0
uhub5: 4 ports with 2 removable, self powered
ugen0.6: <Generic> at usbus0
usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_IOERROR
usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_IOERROR
usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_IOERROR
usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_IOERROR
usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_IOERROR
ugen0.7: <Unknown> at usbus0 (disconnected)
uhub_reattach_port: could not allocate new device
ugen0.7: <Realtek> at usbus0
uhub6: <Interrupt In Interface> on usbus0
uhub6: 4 ports with 2 removable, self powered
ugen0.8: <SanDisk> at usbus0
umass0: <SanDisk Ultra Fit, class 0/0, rev 3.00/1.00, addr 8> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0x8100
umass0:4:0:-1: Attached to scbus4
ses0 at ahciem0 bus 0 scbus3 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
da0 at umass-sim0 bus 0 scbus4 target 0 lun 0
da0: <SanDisk Ultra Fit 1.00> Removable Direct Access SPC-4 SCSI device
da0: Serial Number 4C530001070222115095
da0: 400.000MB/s transfers
da0: 29664MB (60751872 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
ada0: <Samsung SSD 850 EVO 250GB EMT01B6Q> ACS-2 ATA SATA 3.x device
ada0: Serial Number S21PNSAFC82691Z
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 238475MB (488397168 512 byte sectors)
ada0: quirks=0x1<4K>
ada0: Previously was known as ad4
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <Samsung SSD 850 EVO 250GB EMT01B6Q> ACS-2 ATA SATA 3.x device
ada1: Serial Number S21PNXAG994714T
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada1: Command Queueing enabled
ada1: 238475MB (488397168 512 byte sectors)
ada1: quirks=0x1<4K>
ada1: Previously was known as ad6
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #5 Launched!
Timecounter "TSC-low" frequency 1346906516 Hz quality 1000
Trying to mount root from zfs:zroot/ROOT/default []...
cryptosoft0: <software crypto> on motherboard
re0: link state changed to DOWN
re0: link state changed to UP
ums0: <vendor 0x093a USB OPTICAL MOUSE, class 0/0, rev 1.10/1.00, addr 3> on usbus0
ums0: 5 buttons and [XYZT] coordinates ID=0
ACPI Warning: \134_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150515/nsarguments-97)
ACPI Warning: \134_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150515/nsarguments-97)
ACPI Warning: \134_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150515/nsarguments-97)
ACPI Warning: \134_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150515/nsarguments-97)
ACPI Warning: \134_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150515/nsarguments-97)
ACPI Warning: \134_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150515/nsarguments-97)
ACPI Warning: \134_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150515/nsarguments-97)
ACPI Warning: \134_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150515/nsarguments-97)
ACPI Warning: \134_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150515/nsarguments-97)
ACPI Warning: \134_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150515/nsarguments-97)
ACPI Warning: \134_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150515/nsarguments-97)
ACPI Warning: \134_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150515/nsarguments-97)
ACPI Warning: \134_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150515/nsarguments-97)
ACPI Warning: \134_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150515/nsarguments-97)
ACPI Warning: \134_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150515/nsarguments-97)
ACPI Warning: \134_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150515/nsarguments-97)
ACPI Warning: \134_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150515/nsarguments-97)
ACPI Warning: \134_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150515/nsarguments-97)
ACPI Warning: \134_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150515/nsarguments-97)
ACPI Warning: \134_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150515/nsarguments-97)
ACPI Warning: \134_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150515/nsarguments-97)
ACPI Warning: \134_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150515/nsarguments-97)
 
Hier noch ein Xiaomi Air 12,5" 1. Gen. Was nicht funktioniert Grafikbeschleunigung, da ja Skylake nicht bewendet wird. Leider hat das auch Auswirkungen auf dem HDMI Ausgang. Das (Multi)Touchpad funktioniert ebenfalls nicht. Viel mehr Anschlüsse hat das Teil auch nicht. Kein Ethernet, Sondertasten scheinen nicht alle konfiguriert zu sein, Beleuchtung geht jedenfalls.
Natürlich muckte der Installer, ein paar Nullen an der richtigen Stelle und der Bootloader grüßt einen. 7.1 wollte nicht, warum auch immer.

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.

NetBSD 7.99.67 (GENERIC.201704072300Z)
total memory = 4009 MB
avail memory = 3871 MB
cpu_rng: RDSEED
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
RTC BIOS diagnostic error 0x80<clock_battery>
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Timi TM1612 ( )
mainbus0 (root)
ACPI: RSDP 0x00000000000FE020 000024 (v02 XMCC )
ACPI: XSDT 0x000000008CEC0188 00010C (v01 XMCC XMCC1501 00000000 01000013)
ACPI: FACP 0x000000008CEE5000 0000F4 (v05 XMCC XMCC1501 00000000 ACPI 00040000)
ACPI: DSDT 0x000000008CEC2000 01E131 (v02 XMCC XMCC1501 00000000 ACPI 00040000)
ACPI: FACS 0x000000008CE4E000 000040
ACPI: TCPA 0x000000008CEFC000 000032 (v02 XMCC XMCC1501 00000000 ACPI 00040000)
ACPI: UEFI 0x000000008CEFB000 000236 (v01 XMCC XMCC1501 00000001 ACPI 00040000)
ACPI: UEFI 0x000000008CEFA000 000042 (v01 XMCC XMCC1501 00000002 ACPI 00040000)
ACPI: SSDT 0x000000008CEF9000 0004B7 (v02 XMCC XMCC1501 00001000 ACPI 00040000)
ACPI: SSDT 0x000000008CEF8000 00004B (v02 XMCC XMCC1501 00003000 ACPI 00040000)
ACPI: TPM2 0x000000008CEF7000 000034 (v03 XMCC XMCC1501 00000000 ACPI 00040000)
ACPI: MSDM 0x000000008CEF6000 000055 (v03 XMCC XMCC1501 00000001 ACPI 00040000)
ACPI: SSDT 0x000000008CEF0000 0052EE (v02 XMCC XMCC1501 00003000 ACPI 00040000)
ACPI: SSDT 0x000000008CEEC000 003377 (v02 XMCC XMCC1501 00001000 ACPI 00040000)
ACPI: DBGP 0x000000008CEEB000 000034 (v01 XMCC XMCC1501 00000001 ACPI 00040000)
ACPI: DBG2 0x000000008CEEA000 000054 (v00 XMCC XMCC1501 00000000 ACPI 00040000)
ACPI: ASF! 0x000000008CEE9000 0000A5 (v32 XMCC XMCC1501 00000001 ACPI 00040000)
ACPI: ASPT 0x000000008CEE8000 000034 (v07 XMCC XMCC1501 00000001 ACPI 00040000)
ACPI: BOOT 0x000000008CEE7000 000028 (v01 XMCC XMCC1501 00000001 ACPI 00040000)
ACPI: DBGP 0x000000008CEE6000 000034 (v01 XMCC XMCC1501 00000001 ACPI 00040000)
ACPI: HPET 0x000000008CEE4000 000038 (v01 XMCC XMCC1501 00000001 ACPI 00040000)
ACPI: LPIT 0x000000008CEE3000 000094 (v01 XMCC XMCC1501 00000000 ACPI 00040000)
ACPI: APIC 0x000000008CEE2000 0000BC (v03 XMCC XMCC1501 00000001 ACPI 00040000)
ACPI: MCFG 0x000000008CEE1000 00003C (v01 XMCC XMCC1501 00000001 ACPI 00040000)
ACPI: SSDT 0x000000008CEC1000 0002D4 (v01 XMCC XMCC1501 00000000 ACPI 00040000)
ACPI: SSDT 0x000000008CEBD000 002BAE (v02 XMCC XMCC1501 00001000 ACPI 00040000)
ACPI: SSDT 0x000000008CEBC000 0001DD (v02 XMCC XMCC1501 00001000 ACPI 00040000)
ACPI: SSDT 0x000000008CEBB000 00019A (v02 XMCC XMCC1501 00001000 ACPI 00040000)
ACPI: SSDT 0x000000008CEBA000 000B49 (v02 XMCC XMCC1501 00001000 ACPI 00040000)
ACPI: SSDT 0x000000008CEB9000 0004A3 (v02 XMCC XMCC1501 00001000 ACPI 00040000)
ACPI: SSDT 0x000000008CEB8000 000E73 (v02 XMCC XMCC1501 00003000 ACPI 00040000)
ACPI: DMAR 0x000000008CEB7000 0000F0 (v01 XMCC XMCC1501 00000001 ACPI 00040000)
ACPI: FPDT 0x000000008CEB6000 000044 (v01 XMCC XMCC1501 00000002 ACPI 00040000)
ACPI: Executed 18 blocks of module-level executable AML code
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: 12 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 120 pins
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Core(TM) m3-6Y30 CPU @ 0.90GHz, id 0x406e3
cpu1 at mainbus0 apid 2
cpu1: Intel(R) Core(TM) m3-6Y30 CPU @ 0.90GHz, id 0x406e3
cpu2 at mainbus0 apid 1
cpu2: Intel(R) Core(TM) m3-6Y30 CPU @ 0.90GHz, id 0x406e3
cpu3 at mainbus0 apid 3
cpu3: Intel(R) Core(TM) m3-6Y30 CPU @ 0.90GHz, id 0x406e3
acpi0 at mainbus0: Intel ACPICA 20170119
acpi0: X/RSDT: OemId < XMCC,XMCC1501,00000000>, AslId < ,01000013>
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE816DE32C10 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20160108)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE81072E1810 000492 (v02 PmRef Cpu0Ist 00003000 INTL 20160108)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE816DEF0010 0005AA (v02 PmRef ApIst 00003000 INTL 20160108)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE81071E4010 000119 (v02 PmRef ApCst 00003000 INTL 20160108)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 24000000 Hz quality 2000
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (DD02, 0x0002): ACPI Display Output Device
acpiout2 at acpivga0 (DD03, 0x0300): ACPI Display Output Device
acpiout3 at acpivga0 (DD04, 0x0301): ACPI Display Output Device
acpiout4 at acpivga0 (DD05, 0x0005): ACPI Display Output Device
acpiout5 at acpivga0 (DD06, 0x0006): ACPI Display Output Device
acpiout6 at acpivga0 (DD07, 0x0007): ACPI Display Output Device
acpiout7 at acpivga0 (DD08, 0x0008): ACPI Display Output Device
acpiout8 at acpivga0 (DD09, 0x0009): ACPI Display Output Device
acpiout9 at acpivga0 (DD0A, 0x000a): ACPI Display Output Device
acpiout10 at acpivga0 (DD0B, 0x000b): ACPI Display Output Device
acpiout11 at acpivga0 (DD0C, 0x000c): ACPI Display Output Device
acpiout12 at acpivga0 (DD0D, 0x000d): ACPI Display Output Device
acpiout13 at acpivga0 (DD0E, 0x000e): ACPI Display Output Device
acpiout14 at acpivga0 (DD0F, 0x000f): ACPI Display Output Device
acpiout15 at acpivga0 (DD1F, 0x0410): ACPI Display Output Device
acpiout15: brightness levels: [0-100]
acpiout16 at acpivga0 (SKC0, 0xca00): ACPI Display Output Device
acpivga0: unknown output device acpiout0
acpivga0: unknown output device acpiout1
acpivga0: unknown output device acpiout2
acpivga0: unknown output device acpiout3
acpivga0: unknown output device acpiout4
acpivga0: unknown output device acpiout5
acpivga0: unknown output device acpiout6
acpivga0: unknown output device acpiout7
acpivga0: unknown output device acpiout8
acpivga0: unknown output device acpiout9
acpivga0: unknown output device acpiout10
acpivga0: unknown output device acpiout11
acpivga0: unknown output device acpiout12
acpivga0: unknown output device acpiout13
acpivga0: unknown output device acpiout14
acpivga0: unknown output device acpiout15
acpivga0: unknown output device acpiout16
acpivga0: connected output devices:
acpivga0: 0x0400: Unknown Output Device, head 0
acpiwmi0 at acpi0 (WMIE, PNP0C14-IEFS): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
IOTR (PNP0C02) at acpi0 not configured
CIND (INT33D3) at acpi0 not configured
HIDD (INT33D5) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
acpiacad0 at acpi0 (ADP0, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery
FWHD (INT0800) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
CWDT (INT3F0D) at acpi0 not configured
pckbc1 at acpi0 (PS2K, MSFT0001) (kbd port): io 0x60,0x64 irq 1
CHRG (INT3403) at acpi0 not configured
SEN1 (INT3403) at acpi0 not configured
GPI0 (INT344B) at acpi0 not configured
TPD0 (SYNA3105) at acpi0 not configured
PDRC (PNP0C02) at acpi0 not configured
acpiwmi1 at acpi0 (WMTF, PNP0C14-TBFP): ACPI WMI Interface
acpiwmibus at acpiwmi1 not configured
PEPD (INT33A1) at acpi0 not configured
TPM (MSFT0101) at acpi0 not configured
IETM (INT3400) at acpi0 not configured
PTID (INT340E) at acpi0 not configured
acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan
acpitz0 at acpi0 (TZ01)
acpitz0: active cooling level 0: 70.0C
acpitz0: levels: critical 105.0 C, passive 73.0 C
ACPI: Enabled 8 GPEs in block 00 to 7F
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 190c (rev. 0x08)
vga0 at pci0 dev 2 function 0: vendor 8086 product 191e (rev. 0x07)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
vendor 8086 product 1903 (miscellaneous DASP, revision 0x08) at pci0 dev 4 function 0 not configured
xhci0 at pci0 dev 20 function 0: vendor 8086 product 9d2f (rev. 0x21)
xhci0: interrupting at msi0 vec 0
xhci0: xHCI version 1.0
usb0 at xhci0: USB revision 3.0
usb1 at xhci0: USB revision 2.0
vendor 8086 product 9d60 (miscellaneous DASP, revision 0x21) at pci0 dev 21 function 0 not configured
vendor 8086 product 9d61 (miscellaneous DASP, revision 0x21) at pci0 dev 21 function 1 not configured
vendor 8086 product 9d3a (miscellaneous communications, revision 0x21) at pci0 dev 22 function 0 not configured
ahcisata0 at pci0 dev 23 function 0: vendor 8086 product 9d03 (rev. 0x21)
ahcisata0: interrupting at ioapic0 pin 16
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.31, 2 ports, 32 slots, CAP 0xc734ff01<PSC,SSC,PMD,SAM,ISS=0x3=Gen3,SCLO,SAL,SALP,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
ppb0 at pci0 dev 29 function 0: vendor 8086 product 9d18 (rev. 0xf1)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 8.0GT/s
ppb0: link is x1 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
iwm0 at pci1 dev 0 function 0: vendor 8086 product 24f3 (rev. 0x3a)
iwm0: interrupting at msi1 vec 0
pcib0 at pci0 dev 31 function 0: vendor 8086 product 9d46 (rev. 0x21)
vendor 8086 product 9d21 (miscellaneous memory, revision 0x21) at pci0 dev 31 function 2 not configured
hdaudio0 at pci0 dev 31 function 3: HD Audio Controller
hdaudio0: interrupting at msi2 vec 0
hdafg0 at hdaudio0: vendor 10ec product 0235
hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
hdafg0: ADC01 2ch: Mic In [Built-In]
hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
hdafg0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
spkr0 at audio0: PC Speaker (synthesized)
hdafg1 at hdaudio0: vendor 8086 product 2809
hdafg1: DP00 8ch: Digital Out [Jack]
hdafg1: 8ch/0ch 48000Hz PCM16*
ichsmb0 at pci0 dev 31 function 4: vendor 8086 product 9d23 (rev. 0x21)
ichsmb0: interrupting at ioapic0 pin 16
iic0 at ichsmb0: I2C bus
isa0 at pcib0
pcppi0 at isa0 port 0x61
spkr1 at pcppi0: PC Speaker
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 151 us, pow 200 mW
acpicpu0: C3: FFH, lat 1034 us, pow 200 mW
acpicpu0: P0: FFH, lat 10 us, pow 4000 mW, 1501 MHz, turbo boost
acpicpu0: P1: FFH, lat 10 us, pow 4000 mW, 1500 MHz
acpicpu0: P2: FFH, lat 10 us, pow 3677 mW, 1400 MHz
acpicpu0: P3: FFH, lat 10 us, pow 3362 mW, 1300 MHz
acpicpu0: P4: FFH, lat 10 us, pow 3091 mW, 1200 MHz
acpicpu0: P5: FFH, lat 10 us, pow 2788 mW, 1100 MHz
acpicpu0: P6: FFH, lat 10 us, pow 2491 mW, 1000 MHz
acpicpu0: P7: FFH, lat 10 us, pow 2239 mW, 900 MHz
acpicpu0: P8: FFH, lat 10 us, pow 1954 mW, 800 MHz
acpicpu0: P9: FFH, lat 10 us, pow 1676 mW, 700 MHz
acpicpu0: P10: FFH, lat 10 us, pow 1440 mW, 600 MHz
acpicpu0: P11: FFH, lat 10 us, pow 1174 mW, 500 MHz
acpicpu0: P12: FFH, lat 10 us, pow 914 mW, 400 MHz
acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
acpicpu2 at cpu2: ACPI CPU
acpicpu3 at cpu3: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 1512532410 Hz quality 3000
acpiacad0: AC adapter online.
uhub0 at usb0: vendor 8086 (0x8086) xHCI Root Hub (0000), class 9/0, rev 1.00/1.00, addr 0
uhub0: 6 ports with 6 removable, self powered
uhub1 at usb1: vendor 8086 (0x8086) xHCI Root Hub (0000), class 9/0, rev 2.00/1.00, addr 0
uhub1: 12 ports with 12 removable, self powered
IPsec: Initialized Security Association Processing.
ahcisata0 port 1: device present, speed: 6.0Gb/s
ahcisata0 port 0: PHY offline
wd0 at atabus1 drive 0
wd0: <SAMSUNG MZNTY128HDHP-00000>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 119 GB, 248085 cyl, 16 head, 63 sec, 512 bytes/sect x 250069680 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
ubt0 at uhub1 port 3
ubt0: vendor 8087 (0x8087) product 0a2b (0xa2b), rev 2.00/0.01, addr 1
uvideo0 at uhub1 port 7 configuration 1 interface 0: Chicony (0x4f2) XiaoMi USB 2.0 Webcam (0xb59a), rev 2.00/34.04, addr 2
video0 at uvideo0: Chicony (0x4f2) XiaoMi USB 2.0 Webcam (0xb59a), rev 2.00/34.04, addr 2
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
pad0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 44100
spkr2 at audio1: PC Speaker (synthesized)
WARNING: 18 errors while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/amd64/7.99.67/modules
iwm0: hw rev 0x200, fw ver 22.361476.0, address a0:c5:89:16:6a:07
iwm0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwm0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwm0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
uhub2 at uhub1 port 1: Terminus Technology (0x1a40) USB 2.0 Hub (0x801), class 9/0, rev 2.00/1.00, addr 3
uhub2: single transaction translator
uhub2: 4 ports with 4 removable, self powered
uhub2: detached
uhub2: at uhub1 port 1 (addr 3) disconnected
uhub2 at uhub1 port 1: Terminus Technology (0x1a40) USB 2.0 Hub (0x801), class 9/0, rev 2.00/1.00, addr 4
uhub2: single transaction translator
uhub2: 4 ports with 4 removable, self powered
uhub3 at uhub2 port 4: Genesys Logic (0x5e3) USB2.0 Hub (0x608), class 9/0, rev 2.00/7.02, addr 5
uhub3: single transaction translator
uhub3: 4 ports with 4 removable, self powered
uhidev0 at uhub3 port 1 configuration 1 interface 0
uhidev0: LITE-ON Technology (0x4b3) USB NetVista Full Width Keyboard. (0x3025), rev 1.10/1.09, addr 6, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub3 port 4 configuration 1 interface 0
uhidev1: vendor 0000 (0000) USB OPTICAL MOUSE (0x538), rev 1.10/1.00, addr 7, iclass 3/1
uhidev1: 1 report ids
ums0 at uhidev1 reportid 1: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
syncing disks... done
unmounted tmpfs on /var/shm type tmpfs
unmounted procfs on /proc type procfs
unmounted ptyfs on /dev/pts type ptyfs
unmounted kernfs on /kern type kernfs
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.

NetBSD 7.99.67 (GENERIC.201704072300Z)
total memory = 4009 MB
avail memory = 3871 MB
cpu_rng: RDSEED
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
RTC BIOS diagnostic error 0x80<clock_battery>
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Timi TM1612 ( )
mainbus0 (root)
ACPI: RSDP 0x00000000000FE020 000024 (v02 XMCC )
ACPI: XSDT 0x000000008CEC0188 00010C (v01 XMCC XMCC1501 00000000 01000013)
ACPI: FACP 0x000000008CEE5000 0000F4 (v05 XMCC XMCC1501 00000000 ACPI 00040000)
ACPI: DSDT 0x000000008CEC2000 01E131 (v02 XMCC XMCC1501 00000000 ACPI 00040000)
ACPI: FACS 0x000000008CE4E000 000040
ACPI: TCPA 0x000000008CEFC000 000032 (v02 XMCC XMCC1501 00000000 ACPI 00040000)
ACPI: UEFI 0x000000008CEFB000 000236 (v01 XMCC XMCC1501 00000001 ACPI 00040000)
ACPI: UEFI 0x000000008CEFA000 000042 (v01 XMCC XMCC1501 00000002 ACPI 00040000)
ACPI: SSDT 0x000000008CEF9000 0004B7 (v02 XMCC XMCC1501 00001000 ACPI 00040000)
ACPI: SSDT 0x000000008CEF8000 00004B (v02 XMCC XMCC1501 00003000 ACPI 00040000)
ACPI: TPM2 0x000000008CEF7000 000034 (v03 XMCC XMCC1501 00000000 ACPI 00040000)
ACPI: MSDM 0x000000008CEF6000 000055 (v03 XMCC XMCC1501 00000001 ACPI 00040000)
ACPI: SSDT 0x000000008CEF0000 0052EE (v02 XMCC XMCC1501 00003000 ACPI 00040000)
ACPI: SSDT 0x000000008CEEC000 003377 (v02 XMCC XMCC1501 00001000 ACPI 00040000)
ACPI: DBGP 0x000000008CEEB000 000034 (v01 XMCC XMCC1501 00000001 ACPI 00040000)
ACPI: DBG2 0x000000008CEEA000 000054 (v00 XMCC XMCC1501 00000000 ACPI 00040000)
ACPI: ASF! 0x000000008CEE9000 0000A5 (v32 XMCC XMCC1501 00000001 ACPI 00040000)
ACPI: ASPT 0x000000008CEE8000 000034 (v07 XMCC XMCC1501 00000001 ACPI 00040000)
ACPI: BOOT 0x000000008CEE7000 000028 (v01 XMCC XMCC1501 00000001 ACPI 00040000)
ACPI: DBGP 0x000000008CEE6000 000034 (v01 XMCC XMCC1501 00000001 ACPI 00040000)
ACPI: HPET 0x000000008CEE4000 000038 (v01 XMCC XMCC1501 00000001 ACPI 00040000)
ACPI: LPIT 0x000000008CEE3000 000094 (v01 XMCC XMCC1501 00000000 ACPI 00040000)
ACPI: APIC 0x000000008CEE2000 0000BC (v03 XMCC XMCC1501 00000001 ACPI 00040000)
ACPI: MCFG 0x000000008CEE1000 00003C (v01 XMCC XMCC1501 00000001 ACPI 00040000)
ACPI: SSDT 0x000000008CEC1000 0002D4 (v01 XMCC XMCC1501 00000000 ACPI 00040000)
ACPI: SSDT 0x000000008CEBD000 002BAE (v02 XMCC XMCC1501 00001000 ACPI 00040000)
ACPI: SSDT 0x000000008CEBC000 0001DD (v02 XMCC XMCC1501 00001000 ACPI 00040000)
ACPI: SSDT 0x000000008CEBB000 00019A (v02 XMCC XMCC1501 00001000 ACPI 00040000)
ACPI: SSDT 0x000000008CEBA000 000B49 (v02 XMCC XMCC1501 00001000 ACPI 00040000)
ACPI: SSDT 0x000000008CEB9000 0004A3 (v02 XMCC XMCC1501 00001000 ACPI 00040000)
ACPI: SSDT 0x000000008CEB8000 000E73 (v02 XMCC XMCC1501 00003000 ACPI 00040000)
ACPI: DMAR 0x000000008CEB7000 0000F0 (v01 XMCC XMCC1501 00000001 ACPI 00040000)
ACPI: FPDT 0x000000008CEB6000 000044 (v01 XMCC XMCC1501 00000002 ACPI 00040000)
ACPI: Executed 18 blocks of module-level executable AML code
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: 12 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 120 pins
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Core(TM) m3-6Y30 CPU @ 0.90GHz, id 0x406e3
cpu1 at mainbus0 apid 2
cpu1: Intel(R) Core(TM) m3-6Y30 CPU @ 0.90GHz, id 0x406e3
cpu2 at mainbus0 apid 1
cpu2: Intel(R) Core(TM) m3-6Y30 CPU @ 0.90GHz, id 0x406e3
cpu3 at mainbus0 apid 3
cpu3: Intel(R) Core(TM) m3-6Y30 CPU @ 0.90GHz, id 0x406e3
acpi0 at mainbus0: Intel ACPICA 20170119
acpi0: X/RSDT: OemId < XMCC,XMCC1501,00000000>, AslId < ,01000013>
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE816DE32C10 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20160108)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE81072E1810 000492 (v02 PmRef Cpu0Ist 00003000 INTL 20160108)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE816DEF0010 0005AA (v02 PmRef ApIst 00003000 INTL 20160108)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE81071E4010 000119 (v02 PmRef ApCst 00003000 INTL 20160108)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 24000000 Hz quality 2000
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (DD02, 0x0002): ACPI Display Output Device
acpiout2 at acpivga0 (DD03, 0x0300): ACPI Display Output Device
acpiout3 at acpivga0 (DD04, 0x0301): ACPI Display Output Device
acpiout4 at acpivga0 (DD05, 0x0005): ACPI Display Output Device
acpiout5 at acpivga0 (DD06, 0x0006): ACPI Display Output Device
acpiout6 at acpivga0 (DD07, 0x0007): ACPI Display Output Device
acpiout7 at acpivga0 (DD08, 0x0008): ACPI Display Output Device
acpiout8 at acpivga0 (DD09, 0x0009): ACPI Display Output Device
acpiout9 at acpivga0 (DD0A, 0x000a): ACPI Display Output Device
acpiout10 at acpivga0 (DD0B, 0x000b): ACPI Display Output Device
acpiout11 at acpivga0 (DD0C, 0x000c): ACPI Display Output Device
acpiout12 at acpivga0 (DD0D, 0x000d): ACPI Display Output Device
acpiout13 at acpivga0 (DD0E, 0x000e): ACPI Display Output Device
acpiout14 at acpivga0 (DD0F, 0x000f): ACPI Display Output Device
acpiout15 at acpivga0 (DD1F, 0x0410): ACPI Display Output Device
acpiout15: brightness levels: [0-100]
acpiout16 at acpivga0 (SKC0, 0xca00): ACPI Display Output Device
acpivga0: unknown output device acpiout0
acpivga0: unknown output device acpiout1
acpivga0: unknown output device acpiout2
acpivga0: unknown output device acpiout3
acpivga0: unknown output device acpiout4
acpivga0: unknown output device acpiout5
acpivga0: unknown output device acpiout6
acpivga0: unknown output device acpiout7
acpivga0: unknown output device acpiout8
acpivga0: unknown output device acpiout9
acpivga0: unknown output device acpiout10
acpivga0: unknown output device acpiout11
acpivga0: unknown output device acpiout12
acpivga0: unknown output device acpiout13
acpivga0: unknown output device acpiout14
acpivga0: unknown output device acpiout15
acpivga0: unknown output device acpiout16
acpivga0: connected output devices:
acpivga0: 0x0400: Unknown Output Device, head 0
acpiwmi0 at acpi0 (WMIE, PNP0C14-IEFS): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
IOTR (PNP0C02) at acpi0 not configured
CIND (INT33D3) at acpi0 not configured
HIDD (INT33D5) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
acpiacad0 at acpi0 (ADP0, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery
FWHD (INT0800) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
CWDT (INT3F0D) at acpi0 not configured
pckbc1 at acpi0 (PS2K, MSFT0001) (kbd port): io 0x60,0x64 irq 1
CHRG (INT3403) at acpi0 not configured
SEN1 (INT3403) at acpi0 not configured
GPI0 (INT344B) at acpi0 not configured
TPD0 (SYNA3105) at acpi0 not configured
PDRC (PNP0C02) at acpi0 not configured
acpiwmi1 at acpi0 (WMTF, PNP0C14-TBFP): ACPI WMI Interface
acpiwmibus at acpiwmi1 not configured
PEPD (INT33A1) at acpi0 not configured
TPM (MSFT0101) at acpi0 not configured
IETM (INT3400) at acpi0 not configured
PTID (INT340E) at acpi0 not configured
acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan
acpitz0 at acpi0 (TZ01)
acpitz0: active cooling level 0: 70.0C
acpitz0: levels: critical 105.0 C, passive 73.0 C
ACPI: Enabled 8 GPEs in block 00 to 7F
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 190c (rev. 0x08)
vga0 at pci0 dev 2 function 0: vendor 8086 product 191e (rev. 0x07)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
vendor 8086 product 1903 (miscellaneous DASP, revision 0x08) at pci0 dev 4 function 0 not configured
xhci0 at pci0 dev 20 function 0: vendor 8086 product 9d2f (rev. 0x21)
xhci0: interrupting at msi0 vec 0
xhci0: xHCI version 1.0
usb0 at xhci0: USB revision 3.0
usb1 at xhci0: USB revision 2.0
vendor 8086 product 9d60 (miscellaneous DASP, revision 0x21) at pci0 dev 21 function 0 not configured
vendor 8086 product 9d61 (miscellaneous DASP, revision 0x21) at pci0 dev 21 function 1 not configured
vendor 8086 product 9d3a (miscellaneous communications, revision 0x21) at pci0 dev 22 function 0 not configured
ahcisata0 at pci0 dev 23 function 0: vendor 8086 product 9d03 (rev. 0x21)
ahcisata0: interrupting at ioapic0 pin 16
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.31, 2 ports, 32 slots, CAP 0xc734ff01<PSC,SSC,PMD,SAM,ISS=0x3=Gen3,SCLO,SAL,SALP,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
ppb0 at pci0 dev 29 function 0: vendor 8086 product 9d18 (rev. 0xf1)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 8.0GT/s
ppb0: link is x1 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
iwm0 at pci1 dev 0 function 0: vendor 8086 product 24f3 (rev. 0x3a)
iwm0: interrupting at msi1 vec 0
pcib0 at pci0 dev 31 function 0: vendor 8086 product 9d46 (rev. 0x21)
vendor 8086 product 9d21 (miscellaneous memory, revision 0x21) at pci0 dev 31 function 2 not configured
hdaudio0 at pci0 dev 31 function 3: HD Audio Controller
hdaudio0: interrupting at msi2 vec 0
hdafg0 at hdaudio0: vendor 10ec product 0235
hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
hdafg0: ADC01 2ch: Mic In [Built-In]
hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
hdafg0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
spkr0 at audio0: PC Speaker (synthesized)
hdafg1 at hdaudio0: vendor 8086 product 2809
hdafg1: DP00 8ch: Digital Out [Jack]
hdafg1: 8ch/0ch 48000Hz PCM16*
ichsmb0 at pci0 dev 31 function 4: vendor 8086 product 9d23 (rev. 0x21)
ichsmb0: interrupting at ioapic0 pin 16
iic0 at ichsmb0: I2C bus
isa0 at pcib0
pcppi0 at isa0 port 0x61
spkr1 at pcppi0: PC Speaker
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 151 us, pow 200 mW
acpicpu0: C3: FFH, lat 1034 us, pow 200 mW
acpicpu0: P0: FFH, lat 10 us, pow 4000 mW, 1501 MHz, turbo boost
acpicpu0: P1: FFH, lat 10 us, pow 4000 mW, 1500 MHz
acpicpu0: P2: FFH, lat 10 us, pow 3677 mW, 1400 MHz
acpicpu0: P3: FFH, lat 10 us, pow 3362 mW, 1300 MHz
acpicpu0: P4: FFH, lat 10 us, pow 3091 mW, 1200 MHz
acpicpu0: P5: FFH, lat 10 us, pow 2788 mW, 1100 MHz
acpicpu0: P6: FFH, lat 10 us, pow 2491 mW, 1000 MHz
acpicpu0: P7: FFH, lat 10 us, pow 2239 mW, 900 MHz
acpicpu0: P8: FFH, lat 10 us, pow 1954 mW, 800 MHz
acpicpu0: P9: FFH, lat 10 us, pow 1676 mW, 700 MHz
acpicpu0: P10: FFH, lat 10 us, pow 1440 mW, 600 MHz
acpicpu0: P11: FFH, lat 10 us, pow 1174 mW, 500 MHz
acpicpu0: P12: FFH, lat 10 us, pow 914 mW, 400 MHz
acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
acpicpu2 at cpu2: ACPI CPU
acpicpu3 at cpu3: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 1512537150 Hz quality 3000
acpiacad0: AC adapter online.
uhub0 at usb0: vendor 8086 (0x8086) xHCI Root Hub (0000), class 9/0, rev 1.00/1.00, addr 0
uhub0: 6 ports with 6 removable, self powered
uhub1 at usb1: vendor 8086 (0x8086) xHCI Root Hub (0000), class 9/0, rev 2.00/1.00, addr 0
uhub1: 12 ports with 12 removable, self powered
IPsec: Initialized Security Association Processing.
ahcisata0 port 1: device present, speed: 6.0Gb/s
ahcisata0 port 0: PHY offline
wd0 at atabus1 drive 0
wd0: <SAMSUNG MZNTY128HDHP-00000>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 119 GB, 248085 cyl, 16 head, 63 sec, 512 bytes/sect x 250069680 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
uhub2 at uhub1 port 1: vendor 1a40 (0x1a40) USB 2.0 Hub (0x801), class 9/0, rev 2.00/1.00, addr 1
uhub2: single transaction translator
uhub2: 4 ports with 4 removable, self powered
uhub3 at uhub2 port 4: vendor 05e3 (0x5e3) USB2.0 Hub (0x608), class 9/0, rev 2.00/7.02, addr 2
uhub3: single transaction translator
uhub3: 4 ports with 4 removable, self powered
uhidev0 at uhub3 port 1 configuration 1 interface 0
uhidev0: LITE-ON Technology (0x4b3) USB NetVista Full Width Keyboard. (0x3025), rev 1.10/1.09, addr 3, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub3 port 4 configuration 1 interface 0
uhidev1: vendor 0000 (0000) USB OPTICAL MOUSE (0x538), rev 1.10/1.00, addr 4, iclass 3/1
uhidev1: 1 report ids
ums0 at uhidev1 reportid 1: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
ubt0 at uhub1 port 3
ubt0: vendor 8087 (0x8087) product 0a2b (0xa2b), rev 2.00/0.01, addr 5
uvideo0 at uhub1 port 7 configuration 1 interface 0: Chicony (0x4f2) XiaoMi USB 2.0 Webcam (0xb59a), rev 2.00/34.04, addr 6
video0 at uvideo0: Chicony (0x4f2) XiaoMi USB 2.0 Webcam (0xb59a), rev 2.00/34.04, addr 6
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
pad0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 44100
spkr2 at audio1: PC Speaker (synthesized)
WARNING: 18 errors while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/amd64/7.99.67/modules
iwm0: hw rev 0x200, fw ver 22.361476.0, address a0:c5:89:16:6a:07
iwm0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwm0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwm0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
Zum Vergrößern anklicken....
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Zurück
Oben