SantaCruze
Member
hallo leute,
kann mir jemand sagen wie ich die aktuelle cpu geschwindigkeit auslesen und ggf. erhöhen kann?
infos zu meinem notebook siehe anbei.
danke
michael
# dmesg
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RELEASE-p7 #0: Mon Sep 19 16:31:14 CEST 2005
root@holly.jawa.at:/usr/obj/usr/src/sys/NOTEBOOK
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1.60GHz (1596.00-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6d6 Stepping = 6
Features=0xafe9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
real memory = 502136832 (478 MB)
avail memory = 481689600 (459 MB)
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <HP 3084> on motherboard
acpi0: Power Button (fixed)
acpi_ec0: <Embedded Controller: GPE 0x1d> port 0x66,0x62 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral> at device 0.1 (no driver attached)
pci0: <base peripheral> at device 0.3 (no driver attached)
agp0: <Intel 8285xM (85xGM GMCH) SVGA controller> port 0x1800-0x1807 mem 0xe0000000-0xe007ffff,0xe8000000-0xefffffff irq 10 at device 2.0
on pci0
agp0: detected 32636k stolen memory
agp0: aperture size is 128M
pci0: <display> at device 2.1 (no driver attached)
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1820-0x183f irq 10 at device 29.0 on pci0
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1840-0x185f irq 11 at device 29.1 on pci0
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1860-0x187f at device 29.2 on pci0
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib1
rl0: <RealTek 8139 10/100BaseTX> port 0x3000-0x30ff mem 0xe0205800-0xe02058ff irq 10 at device 0.0 on pci2
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:c0:9f:65:0e:ac
cbb0: <TI1410 PCI-CardBus Bridge> at device 5.0 on pci2
cardbus0: <CardBus bus> on cbb0pccard0: <16-bit PCCard bus> on cbb0
pci2: <network> at device 6.0 (no driver attached)
fwohci0: <Texas Instruments TSB43AB21/A/AI/A-EP> mem 0xe0200000-0xe0203fff,0xe0205000-0xe02057ff irq 11 at device 7.0 on pci2
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:c0:9f:00:00:2f:00:0e
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:c0:9f:2f:00:0e
fwe0: Ethernet address: 02:c0:9f:2f:00:0e
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0x1810-0x181f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH4 (82801DB)> port 0x18c0-0x18ff,0x1c00-0x1cff mem 0xe0100800-0xe01008ff,0xe0100c00-0xe0100dff irq 5 at device 31.5 on pci0
pcm0: <Unknown AC97 Codec (id = 0x43585430)>
pci0: <simple comms, generic modem> at device 31.6 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
orm0: <ISA Option ROMs> at iomem 0xe0000-0xe3fff,0xdf000-0xdffff,0xcd000-0xcdfff on isa0
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
uhub3: vendor 0x2101 USB2.0 Hub, class 9/0, rev 2.00/5.08, addr 2
uhub3: 4 ports with 4 removable, self powered
ums0: Microsoft Microsoft IntelliMouse\M-. Optical, rev 1.10/1.21, addr 3, iclass 3/1
ums0: 5 buttons and Z dir.
ukbd0: GM-TEK USB Composite Device, rev 1.01/0.01, addr 4, iclass 3/1
kbd1 at ukbd0
ums1: GM-TEK USB Composite Device, rev 1.01/0.01, addr 4, iclass 3/1
ums1: 3 buttons and Z dir.
Timecounter "TSC" frequency 1596004727 Hz quality 800
Timecounters tick every 10.000 msec
ad0: 57231MB <IC25N060ATMR04-0/MO3OAD4A> [116280/16/63] at ata0-master UDMA100
acd0: DVDR <NEC DVD+/-RW ND-6450A/2.36> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s2a
# sysctl -a
hw.machine: i386
hw.model: Intel(R) Pentium(R) M processor 1.60GHz
hw.ncpu: 1
kern.ccpu: 1948
kern.smp.maxcpus: 1
kern.smp.cpus: 1
hw.ncpu: 1
hw.acpi.cpu.cx_supported: C1/1 C2/1
hw.acpi.cpu.cx_lowest: C1
hw.acpi.cpu.cx_usage: 100.00% 0.00%
machdep.cpu_idle_hlt: 1
dev.cpu.0.%desc: ACPI CPU (3 Cx states)
dev.cpu.0.%driver: cpu
dev.cpu.0.%location: handle=\_PR_.CPU0
dev.cpu.0.%pnpinfo: _HID=none _UID=0
dev.cpu.0.%parent: acpi0
kann mir jemand sagen wie ich die aktuelle cpu geschwindigkeit auslesen und ggf. erhöhen kann?
infos zu meinem notebook siehe anbei.
danke
michael
# dmesg
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RELEASE-p7 #0: Mon Sep 19 16:31:14 CEST 2005
root@holly.jawa.at:/usr/obj/usr/src/sys/NOTEBOOK
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1.60GHz (1596.00-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6d6 Stepping = 6
Features=0xafe9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
real memory = 502136832 (478 MB)
avail memory = 481689600 (459 MB)
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <HP 3084> on motherboard
acpi0: Power Button (fixed)
acpi_ec0: <Embedded Controller: GPE 0x1d> port 0x66,0x62 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral> at device 0.1 (no driver attached)
pci0: <base peripheral> at device 0.3 (no driver attached)
agp0: <Intel 8285xM (85xGM GMCH) SVGA controller> port 0x1800-0x1807 mem 0xe0000000-0xe007ffff,0xe8000000-0xefffffff irq 10 at device 2.0
on pci0
agp0: detected 32636k stolen memory
agp0: aperture size is 128M
pci0: <display> at device 2.1 (no driver attached)
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1820-0x183f irq 10 at device 29.0 on pci0
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1840-0x185f irq 11 at device 29.1 on pci0
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1860-0x187f at device 29.2 on pci0
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib1
rl0: <RealTek 8139 10/100BaseTX> port 0x3000-0x30ff mem 0xe0205800-0xe02058ff irq 10 at device 0.0 on pci2
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:c0:9f:65:0e:ac
cbb0: <TI1410 PCI-CardBus Bridge> at device 5.0 on pci2
cardbus0: <CardBus bus> on cbb0pccard0: <16-bit PCCard bus> on cbb0
pci2: <network> at device 6.0 (no driver attached)
fwohci0: <Texas Instruments TSB43AB21/A/AI/A-EP> mem 0xe0200000-0xe0203fff,0xe0205000-0xe02057ff irq 11 at device 7.0 on pci2
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:c0:9f:00:00:2f:00:0e
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:c0:9f:2f:00:0e
fwe0: Ethernet address: 02:c0:9f:2f:00:0e
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0x1810-0x181f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH4 (82801DB)> port 0x18c0-0x18ff,0x1c00-0x1cff mem 0xe0100800-0xe01008ff,0xe0100c00-0xe0100dff irq 5 at device 31.5 on pci0
pcm0: <Unknown AC97 Codec (id = 0x43585430)>
pci0: <simple comms, generic modem> at device 31.6 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
orm0: <ISA Option ROMs> at iomem 0xe0000-0xe3fff,0xdf000-0xdffff,0xcd000-0xcdfff on isa0
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
uhub3: vendor 0x2101 USB2.0 Hub, class 9/0, rev 2.00/5.08, addr 2
uhub3: 4 ports with 4 removable, self powered
ums0: Microsoft Microsoft IntelliMouse\M-. Optical, rev 1.10/1.21, addr 3, iclass 3/1
ums0: 5 buttons and Z dir.
ukbd0: GM-TEK USB Composite Device, rev 1.01/0.01, addr 4, iclass 3/1
kbd1 at ukbd0
ums1: GM-TEK USB Composite Device, rev 1.01/0.01, addr 4, iclass 3/1
ums1: 3 buttons and Z dir.
Timecounter "TSC" frequency 1596004727 Hz quality 800
Timecounters tick every 10.000 msec
ad0: 57231MB <IC25N060ATMR04-0/MO3OAD4A> [116280/16/63] at ata0-master UDMA100
acd0: DVDR <NEC DVD+/-RW ND-6450A/2.36> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s2a
# sysctl -a
hw.machine: i386
hw.model: Intel(R) Pentium(R) M processor 1.60GHz
hw.ncpu: 1
kern.ccpu: 1948
kern.smp.maxcpus: 1
kern.smp.cpus: 1
hw.ncpu: 1
hw.acpi.cpu.cx_supported: C1/1 C2/1
hw.acpi.cpu.cx_lowest: C1
hw.acpi.cpu.cx_usage: 100.00% 0.00%
machdep.cpu_idle_hlt: 1
dev.cpu.0.%desc: ACPI CPU (3 Cx states)
dev.cpu.0.%driver: cpu
dev.cpu.0.%location: handle=\_PR_.CPU0
dev.cpu.0.%pnpinfo: _HID=none _UID=0
dev.cpu.0.%parent: acpi0