Einrichten - Orinoco Gold

  • Thread starter Thread starter tobi979
  • Start date Start date
T

tobi979

Guest
Hi Leute,

ich versuche gerade meine Orinoco PCMCIA Karte bei meinem Notebook einzurichten.

Meine Kernel Conf sieht folgendermassen aus:
Code:
#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
#    [url]http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html[/url]
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server ([url]http://www.FreeBSD.org/[/url]) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files. 
# If you are in doubt as to the purpose or necessity of a line, check first 
# in NOTES.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.394.2.2 2003/12/07 23:52:53 scottl Exp $

machine		i386
cpu		I486_CPU
cpu		I586_CPU
cpu		I686_CPU
ident		GENERIC

#To statically compile in device wiring instead of /boot/device.hints
#hints		"GENERIC.hints"		#Default places to look for devices.

#makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug symbols

options 	SCHED_4BSD		#4BSD scheduler
options 	INET			#InterNETworking
#options 	INET6			#IPv6 communications protocols
options 	FFS			#Berkeley Fast Filesystem
options 	SOFTUPDATES		#Enable FFS soft updates support
options 	UFS_ACL			#Support for access control lists
options 	UFS_DIRHASH		#Improve performance on big directories
options 	MD_ROOT			#MD is a potential root device
options 	NFSCLIENT		#Network Filesystem Client
options 	NFSSERVER		#Network Filesystem Server
options 	NFS_ROOT		#NFS usable as /, requires NFSCLIENT
options 	MSDOSFS			#MSDOS Filesystem
options 	CD9660			#ISO 9660 Filesystem
options 	PROCFS			#Process filesystem (requires PSEUDOFS)
options 	PSEUDOFS		#Pseudo-filesystem framework
options 	COMPAT_43		#Compatible with BSD 4.3 [KEEP THIS!]
options 	COMPAT_FREEBSD4		#Compatible with FreeBSD4
options 	SCSI_DELAY=15000	#Delay (in ms) before probing SCSI
options 	KTRACE			#ktrace(1) support
options 	SYSVSHM			#SYSV-style shared memory
options 	SYSVMSG			#SYSV-style message queues
options 	SYSVSEM			#SYSV-style semaphores
options 	_KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev
options 	AHC_REG_PRETTY_PRINT	# Print register bitfields in debug
					# output.  Adds ~128k to driver.
options 	AHD_REG_PRETTY_PRINT	# Print register bitfields in debug
					# output.  Adds ~215k to driver.

# Debugging for use in -current
#options 	DDB			#Enable the kernel debugger
#options 	INVARIANTS		#Enable calls of extra sanity checking
options 	INVARIANT_SUPPORT	#Extra sanity checks of internal structures, required by INVARIANTS
#options 	WITNESS			#Enable checks to detect deadlocks and cycles
#options 	WITNESS_SKIPSPIN	#Don't run witness on spinlocks for speed

# To make an SMP kernel, the next two are needed
options 	SMP			# Symmetric MultiProcessor Kernel
device		apic			# I/O APIC

device		isa
device		eisa
device		pci

# Floppy drives
device		fdc

# ATA and ATAPI devices
device		ata
device		atadisk			# ATA disk drives
device		ataraid			# ATA RAID drives
device		atapicd			# ATAPI CDROM drives
device		atapifd			# ATAPI floppy drives
device		atapist			# ATAPI tape drives
options 	ATA_STATIC_ID		#Static device numbering

# SCSI Controllers
device		ahb		# EISA AHA1742 family
device		ahc		# AHA2940 and onboard AIC7xxx devices
device		ahd		# AHA39320/29320 and onboard AIC79xx devices
device		amd		# AMD 53C974 (Tekram DC-390(T))
device		isp		# Qlogic family
device		mpt		# LSI-Logic MPT-Fusion
#device		ncr		# NCR/Symbios Logic
device		sym		# NCR/Symbios Logic (newer chipsets + those of `ncr')
device		trm		# Tekram DC395U/UW/F DC315U adapters

device		adv		# Advansys SCSI adapters
device		adw		# Advansys wide SCSI adapters
device		aha		# Adaptec 154x SCSI adapters
device		aic		# Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
device		bt		# Buslogic/Mylex MultiMaster SCSI adapters

device		ncv		# NCR 53C500
device		nsp		# Workbit Ninja SCSI-3
device		stg		# TMC 18C30/18C50

# SCSI peripherals
device		scbus		# SCSI bus (required for SCSI)
device		ch		# SCSI media changers
device		da		# Direct Access (disks)
device		sa		# Sequential Access (tape etc)
device		cd		# CD
device		pass		# Passthrough device (direct SCSI access)
device		ses		# SCSI Environmental Services (and SAF-TE)

# RAID controllers interfaced to the SCSI subsystem
device		amr		# AMI MegaRAID
device		asr		# DPT SmartRAID V, VI and Adaptec SCSI RAID
device		ciss		# Compaq Smart RAID 5*
device		dpt		# DPT Smartcache III, IV - See NOTES for options
device		iir		# Intel Integrated RAID
device		ips		# IBM (Adaptec) ServeRAID
device		mly		# Mylex AcceleRAID/eXtremeRAID

# RAID controllers
device		aac		# Adaptec FSA RAID
device		aacp		# SCSI passthrough for aac (requires CAM)
device		ida		# Compaq Smart RAID
device		mlx		# Mylex DAC960 family
device		pst		# Promise Supertrak SX6000
device		twe		# 3ware ATA RAID

# atkbdc0 controls both the keyboard and the PS/2 mouse
device		atkbdc		# AT keyboard controller
device		atkbd		# AT keyboard
device		psm		# PS/2 mouse

device		vga
options 	VESA
options 	VGA_WIDTH90
options		SC_PIXEL_MODE

device		splash		# Splash screen and screen saver support

# syscons is the default console driver, resembling an SCO console
device		sc

# Enable this for the pcvt (VT220 compatible) console driver
#device		vt
#options 	XSERVER			# support for X server on a vt console
#options 	FAT_CURSOR		# start with block cursor

device		agp		# support several AGP chipsets

# Floating point support - do not disable.
device		npx

# Power management support (see NOTES for more options)
#device		apm
# Add suspend/resume support for the i8254.
device		pmtimer

# PCCARD (PCMCIA) support
# Pcmcia and cardbus bridge support
device		cbb			# cardbus (yenta) bridge
#device		pcic			# ExCA ISA and PCI bridges
device		pccard			# PC Card (16-bit) bus
device		cardbus			# CardBus (32-bit) bus

# Serial (COM) ports
device		sio		# 8250, 16[45]50 based serial ports

# Parallel port
device		ppc
device		ppbus		# Parallel port bus (required)
device		lpt		# Printer
device		plip		# TCP/IP over parallel
device		ppi		# Parallel port interface device
#device		vpo		# Requires scbus and da

# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to the sio and/or ppc drivers):
#device         puc

# PCI Ethernet NICs.
device		de		# DEC/Intel DC21x4x (``Tulip'')
device		em		# Intel PRO/1000 adapter Gigabit Ethernet Card
device		txp		# 3Com 3cR990 (``Typhoon'')
device		vx		# 3Com 3c590, 3c595 (``Vortex'')

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device		miibus		# MII bus support
device		bfe		# Broadcom BCM440x 10/100 ethernet
device		bge		# Broadcom BCM570xx Gigabit Ethernet
device		dc		# DEC/Intel 21143 and various workalikes
device		fxp		# Intel EtherExpress PRO/100B (82557, 82558)
device		pcn		# AMD Am79C97x PCI 10/100 (precedence over 'lnc')
device		re		# RealTek 8139C+/8169/8169S/8110S
device		rl		# RealTek 8129/8139
device		sf		# Adaptec AIC-6915 (``Starfire'')
device		sis		# Silicon Integrated Systems SiS 900/SiS 7016
device		sk		# SysKonnect SK-984x and SK-982x gigabit ethernet
device		ste		# Sundance ST201 (D-Link DFE-550TX)
device		ti		# Alteon Networks Tigon I/II gigabit ethernet
device		tl		# Texas Instruments ThunderLAN
device		tx		# SMC EtherPower II (83c170 ``EPIC'')
device		vr		# VIA Rhine, Rhine II
device		wb		# Winbond W89C840F
device		xl		# 3Com 3c90x (``Boomerang'', ``Cyclone'')

# ISA Ethernet NICs.  pccard nics included.
device		cs		# Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
device		ed		# NE[12]000, SMC Ultra, 3c503, DS8390 cards
device		ex		# Intel EtherExpress Pro/10 and Pro/10+
device		ep		# Etherlink III based cards
device		fe		# Fujitsu MB8696x based cards
device		ie		# EtherExpress 8/16, 3C507, StarLAN 10 etc.
device		lnc		# NE2100, NE32-VL Lance Ethernet cards
device		sn		# SMC's 9000 series of ethernet chips
device		xe		# Xircom pccard ethernet

# ISA devices that use the old ISA shims
#device		le

# Wireless NIC cards
device		wlan		# 802.11 support
device		an		# Aironet 4500/4800 802.11 wireless NICs. 
device		awi		# BayStack 660 and others
device		wi		# WaveLAN/Intersil/Symbol 802.11 wireless NICs.
device		wl		# Older non 802.11 Wavelan wireless NIC.

# Pseudo devices - the number indicates how many units to allocate.
device		random		# Entropy device
device		loop		# Network loopback
device		ether		# Ethernet support
device		sl		# Kernel SLIP
device		ppp		# Kernel PPP
device		tun		# Packet tunnel.
device		pty		# Pseudo-ttys (telnet etc)
device		md		# Memory "disks"
device		gif		# IPv6 and IPv4 tunneling
device		faith		# IPv6-to-IPv4 relaying (translation)

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device		bpf		# Berkeley packet filter

# USB support
device		uhci		# UHCI PCI->USB interface
device		ohci		# OHCI PCI->USB interface
device		usb		# USB Bus (required)
#device		udbp		# USB Double Bulk Pipe devices
device		ugen		# Generic
device		uhid		# "Human Interface Devices"
device		ukbd		# Keyboard
device		ulpt		# Printer
device		umass		# Disks/Mass storage - Requires scbus and da
device		ums		# Mouse
device		urio		# Diamond Rio 500 MP3 player
device		uscanner	# Scanners
# USB Ethernet, requires mii
device		aue		# ADMtek USB ethernet
device		axe		# ASIX Electronics USB ethernet
device		cue		# CATC USB ethernet
device		kue		# Kawasaki LSI USB ethernet

# FireWire support
device		firewire	# FireWire bus code
device		sbp		# SCSI over FireWire (Requires scbus and da)
device		fwe		# Ethernet over FireWire (non-standard!)

# Eintragung von mir fuer Sound
device pcm # Soundkarte

In der rc.conf habe ich pccard_enable="YES" stehen.

Leider kann ich die karte jetzt nicht mit ifconfig einrichten.
Was mache ich falsch? Muß ich in der rc.conf noch was ergänzen? wl oder wi


Danke

Viele Grüße Tobi
 
Ausgabe von dmesg? Wird ei Karte überhaupt erkannt?
Ist das eine 32Bit Karte, sprich CARDBUS? Wenn ja, unter 4.x sollten nur 16Bit gehen (kann mich aber auch täuschen da ich nur noch 5.x einsetze).
Was für ein Chipsatz?
 
Also dmesg gibt folgendes aus:

Code:
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.2-RELEASE #0: Sun Jul 11 22:04:11 CEST 2004
    [email]tobmon@notebook.home[/email]:/usr/src/sys/i386/compile/KERNEL
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a77000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a7726c.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) III Mobile CPU      1133MHz (730.90-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6b1  Stepping = 1
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 267780096 (255 MB)
avail memory = 250470400 (238 MB)
Pentium Pro MTRR support enabled
VESA: v2.0, 32768k memory, flags:0x1, mode table:0xc0951f62 (1000022)
VESA: ATI MOBILITY RADEON
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD  	 RSDT  > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 11 entries at 0xc00fdf10
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
unknown: memory range not supported
unknown: memory range not supported
unknown: memory range not supported
unknown: memory range not supported
unknown: memory range not supported
unknown: memory range not supported
unknown: memory range not supported
unknown: memory range not supported
unknown: memory range not supported
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 29 INTA is routed to irq 9
pcib0: slot 29 INTB is routed to irq 11
pcib0: slot 29 INTC is routed to irq 9
pcib0: slot 31 INTB is routed to irq 5
pcib0: slot 31 INTB is routed to irq 5
agp0: <Intel 82830 host to AGP bridge> mem 0xe0000000-0xefffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib1: slot 0 INTA is routed to irq 9
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1860-0x187f irq 9 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1880-0x189f irq 11 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x1800-0x181f irq 9 at device 29.2 on pci0
usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib2: slot 4 INTA is routed to irq 5
pcib2: slot 5 INTA is routed to irq 10
pcib2: slot 8 INTA is routed to irq 10
pci2: <simple comms> at device 4.0 (no driver attached)
fwohci0: <Texas Instruments TSB43AB22/A> mem 0xd0210000-0xd0213fff,0xd0214000-0xd02147ff irq 10 at device 5.0 on pci2
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:50:8b:70:31:1a:84:9a
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:50:8b:1a:84:9a
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
cbb0: <TI1410 PCI-CardBus Bridge> at device 6.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib2: slot 6 INTA is routed to irq 11
cbb0: [MPSAFE]
fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0x3040-0x307f mem 0xd0215000-0xd0215fff irq 10 at device 8.0 on pci2
fxp0: Ethernet address 00:02:a5:6d:b0:d2
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 UDMA100 controller> port 0x1820-0x182f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem 0xd0000000-0xd00003ff at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH3 (82801CA)> port 0x18c0-0x18ff,0x1c00-0x1cff irq 5 at device 31.5 on pci0
pcm0: <Analog Devices AD1886 AC97 Codec>
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_cmbat1: <Control Method Battery> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
acpi_ec0: <Embedded Controller: GPE 0x1d> port 0x66,0x62 on acpi0
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 1 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
orm0: <Option ROMs> at iomem 0xe5000-0xe5fff,0xe0000-0xe3fff,0xce000-0xcefff,0xc0000-0xcdfff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 730901561 Hz quality 800
Timecounters tick every 10.000 msec
cbb0: Unsupported card type detected
system power profile changed to 'economy'
GEOM: create disk ad0 dp=0xc2ed6460
ad0: 19077MB <IC25N020ATDA04-0> [38760/16/63] at ata0-master UDMA100
acd0: CDRW <SD-R2102> at ata0-slave PIO4
Mounting root from ufs:/dev/ad0s3a
drm0: <ATI Radeon LY Mobility M6> port 0x2000-0x20ff mem 0xd0100000-0xd010ffff,0xd8000000-0xdfffffff irq 9 at device 0.0 on pci1
info: [drm] AGP at 0xe0000000 256MB
info: [drm] Initialized radeon 1.10.0 20020828 on minor 0
drm0: [MPSAFE]

Also ich finde die Karte nicht.

Ich verwende FBSD 5.2

Die Karte sollte laut Netz einen Orinoco Chip besitzten. Es ist eine Proxim Orinoco Gold (PC24E-11-ET/R)

Gruß Tobi
 
Da steht doch alles:
cbb0: <TI1410 PCI-CardBus Bridge> at device 6.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib2: slot 6 INTA is routed to irq 11
cbb0: [MPSAFE]
fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0x3040-0x307f mem 0xd0215000-0xd0215fff irq 10 at device 8.0 on pci2
fxp0: Ethernet address 00:02:a5:6d:b0:d2
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
[...]
cbb0: Unsupported card type detected
 
Ich bin jetzt dem Problem etwas näher gerückt. Mir ist aufgefallen, dass ich auch ohne eingesteckte PCMCIA Karte diese Fehlermeldung kriege:
Code:
cbb0: Unsupported card type detected
Sehe ich das richtig das es nicht an der Karte sondern an meinem TI PCI 1410 Cardbus liegt?
In der /sys/pccard/pcic_pci.c steht der TI 1410 mit als unterstützt mit drinn. Ich hab auch schon was davon gelesen, dass man mit disable pcibios was erreichen kann.
Aber wo muss ich das eingeben? Oder muss ich meinen Kernel neu compilieren mit der expliziten Unterstützung für den Cardbus?

Vielen Dank

Grüße Tobi
 
was brachte denn den Erfolg?

--> hw.pci.allow_unsupported_io_range="1" ??

besitzt die Proxim einen Prism 2/2.5 Chipsatz, so aus reinem Interesse?
 
Ja genau, das musste ich noch zusätzlich eintragen. Allerdings hat das weniger mit der WLAN-Karte zu tun sondern mehr mit dem Notebook an sich. Ich hatte ja auch das Problem, das der TI Cardbus nicht erkannt wurde. Damit ging der Cardbus und ich musste nur noch das Modul (wi) für die Karte in den Kernel bringen.

Jetzt muss ich nur noch hinbekommen, dass ich wenn ich die Karte während des Betriebs reinstecke, die Karte ne feste ip kriegt.

Gruss Tobi
 
Back
Top