FreeBSD6.2 auf DELL PE860 mit SAS 5iR

raffnix

Active Member
nabend,

so, unser doch schon sehr betagter webserver hat gestern den geist aufgegeben.
derzeit habe ich den webserver in einer vm laufen, was aber bei datenbankabfragen eine reine katastrophe darstellt und unseren usern nicht zumutbar ist.

also muss ein neuer server her ...

entscheidung ist auf einen DELL PE860 gefallen (vorraussetzung FreeBSD6.2 läuft ohne probs und langwierige treibersuche).
allerdings haben wir im inet keine erfahrungsberichte mit FreeBSD und dem integrierten SAS 5iR controller gefunden.

wird der controller während der installation erkannt?
gibt es unter euch welche, die den controller im einsatz haben?

eine antwort wäre fein :)

thx and ru
raffnix
 
Ich hab einen PE860 - der Controller hat einen LSI-Chipsatz intus, sodass er sogar mit OpenBSD funktioniert ;)
 
Ich hab einen PE860 - der Controller hat einen LSI-Chipsatz intus, sodass er sogar mit OpenBSD funktioniert ;)

http://www.freebsd.org/releases/6.2R/hardware-i386.html#DISK
The mfi(4) driver supports the following hardware:
LSI MegaRAID SAS 8408E
LSI MegaRAID SAS 8480E
Dell PERC5/i

hatte mir schon überlegt den PERC5 controller zu gönnen ... wären aber +250€ und da stoße ich an das bewilligte (leider sehr begrenzte) budget.

d.h. du meinst, dass unter FreeBSD der controller laufen sollte?
oder kannst du mir den genauen controllernamen sagen?
 
Hmm, gute Frage... in der dmesg identifiziert sich der Controller so:
Code:
mpi0 at pci2 dev 8 function 0 "Symbios Logic SAS1068" rev 0x01: apic 2 int 16 (irq 5)
IMHO ist das der SAS 5iR; die PERC-Controller haben alle Intel-Chips. Zweifelsfrei kann ich das aber nicht bestätigen, da ich den Server nicht selbst bei Dell bestellt habe und jetzt auch nur remote reinschauen kann. Notfalls musst Du Dell mal anrufen/anschreiben, die müssten Dir bestätigen können, welcher Chip da drinsteckt.
 
thx

ja, bei dell hät ich eh vorher nochmal angerufen und mich zu den technikern durchstellen lassen.

die haben vielleicht erfahrung damit.

oder wenn die keine erfahrung mit freebsd haben, dann evtl. mit ubuntu oder sonst einem debian abkömmling.

dank dir nochmal :-)
 
damit der thread einen ordentlichen abschluss hat und falls jemand ein ähnliche frage hat/te.

so, server bestellt, FreeBSD 6.2 rein.
standard installtion durchgeführt:

-auftrag / auswahl -
DELL PowerEdge860
210-17425 PE860 Quad-Core Xeon X3210 2.13GHz/2x4MB 1066FSB (105W) 1 1.600,00 1.600,00
330-10069 PCI-E Riser Card (1xPCI-E x8 slot, 1x PCI-E x4 slot) 1
340-13914 SHIP PE860 Power Cord - German 1
350-10186 PE860 Front Bezel 1
370-12082 4GB 667MHz Dual Rank ECC Memory (4X1GB) 1
400-12854 73GB SAS (15,000rpm) 3.5 inch Hard Drive (non hot-plug) 1
401-10726 73GB SAS (15,000rpm) 3.5 inch Hard Drive (non hot-plug) 1
403-10185 SAS 5iR internal RAID controller, PCI-e 1
429-12033 (PE850/PE860 ONLY) 8X IDE DVD-ROM drive 1
540-10366 Broadcom NetXtreme 5721 Single Port Gigabit Ethernet Teaming NIC, Cu, PCIe x1 1
611-10036 No Operating System 1
631-10112 PE860 Open Manage Factory Install and CD 1
680-16734 Upg to Basic 3Y NBD Premier Enterprise Support 1
680-16448 Recommended Enterprise Support declined. Basic support with limited HW support, NBD only 1
683-11870 You have chosen not to take the Dell PowerEdge installation service 1
688-10583 Base Warranty 1
688-10584 3Y NBD (Next Business Day) On-site 1
770-10669 Sliding Versa rail 1
780-10782 C4 SAS/SATA cabled, RAID 1, Add-in SAS5iR Cntrl, 2 Hard Drives 1
800-10498 PowerEdge Order - Germany 1

- dmesg standardinstalltion ohne irgendwelche optimierungen -
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #0: Fri Jan 12 11:05:30 UTC 2007
root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz (2133.42-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6fb Stepping = 11
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C
MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,<b9>,CX16,<b14>,<b15>>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 4
real memory = 3757834240 (3583 MB)
avail memory = 3678318592 (3507 MB)
ACPI APIC Table: <DELL PE_SC3 >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
ioapic0: Changing APIC ID to 4
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <DELL PE_SC3> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <PCI-PCI bridge> at device 0.0 on pci1
pci2: <PCI bus> on pcib2
mpt0: <LSILogic SAS/SATA Adapter> port 0xec00-0xecff mem 0xfe9fc000-0xfe9fffff,0
xfe9e0000-0xfe9effff irq 16 at device 8.0 on pci2
mpt0: [GIANT-LOCKED]
mpt0: MPI Version=1.5.13.0
mpt0: mpt_cam_event: 0x16
mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required).
mpt0: mpt_cam_event: 0x12
mpt0: Unhandled Event Notify Frame. Event 0x12 (ACK not required).
mpt0: mpt_cam_event: 0x12
mpt0: Unhandled Event Notify Frame. Event 0x12 (ACK not required).
mpt0: mpt_cam_event: 0x16
mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required).
mpt0: mpt_cam_event: 0xb
mpt0: Unhandled Event Notify Frame. Event 0xb (ACK not required).
pci1: <base peripheral, interrupt controller> at device 0.1 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci3: <ACPI PCI bus> on pcib3
bge0: <Broadcom BCM5750 C1, ASIC rev. 0x4201> mem 0xfe5f0000-0xfe5fffff irq 16 a
t device 0.0 on pci3
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX
-FDX, auto
bge0: Ethernet address: 00:10:18:30:4a:50
pcib4: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pci4: <ACPI PCI bus> on pcib4
bge1: <Broadcom BCM5750 B1, ASIC rev. 0x4101> mem 0xfe3f0000-0xfe3fffff irq 16 a
t device 0.0 on pci4
miibus1: <MII bus> on bge1
brgphy1: <BCM5750 10/100/1000baseTX PHY> on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX
-FDX, auto
bge1: Ethernet address: 00:1c:23:e2:e0:ba
pcib5: <ACPI PCI-PCI bridge> at device 28.5 on pci0
pci5: <ACPI PCI bus> on pcib5
bge2: <Broadcom BCM5750 B1, ASIC rev. 0x4101> mem 0xfe1f0000-0xfe1fffff irq 17 a
t device 0.0 on pci5
miibus2: <MII bus> on bge2
brgphy2: <BCM5750 10/100/1000baseTX PHY> on miibus2
brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX
-FDX, auto
bge2: Ethernet address: 00:1c:23:e2:e0:bb
uhci0: <UHCI (generic) USB controller> port 0x9ce0-0x9cff irq 20 at device 29.0
on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x9cc0-0x9cdf irq 21 at device 29.1
on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x9ca0-0x9cbf irq 22 at device 29.2
on pci0
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfeb00000-0xfeb003ff irq
20 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb3: EHCI version 1.0
usb3: wrong number of companions (7 != 3)
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
uhub4: vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr 2
uhub4: multiple transaction translators
uhub4: 4 ports with 4 removable, self powered
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci6: <ACPI PCI bus> on pcib6
pci6: <display, VGA> at device 5.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x37
6,0xfc00-0xfc0f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xc9000-0xc9fff,0xd0000-0xd17ff
,0xec000-0xeffff on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
acd0: DVDROM <TEAC DVD-ROM DV28EV/D.AE> at ata0-master UDMA33
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
da0 at mpt0 bus 0 target 0 lun 0
da0: <Dell VIRTUAL DISK 1028> Fixed Direct Access SCSI-5 device
da0: 300.000MB/s transfers, Tagged Queueing Enabled
da0: 69618MB (142577664 512 byte sectors: 255H 63S/T 8875C)
Trying to mount root from ufs:/dev/da0s1a
bge0: link state changed to UP
 
Kann den Support für Dell PERC5/i soweit bestätigen, als dass ich mal fbsd verwenden musste, um einen PE1950 zu plätten. :)
 
Back
Top