• Diese Seite verwendet Cookies. Indem du diese Website weiterhin nutzt, erklärst du dich mit der Verwendung von Cookies einverstanden. Erfahre mehr

FreeBSD8, reboot - "Stopping other CPUs" hängt

reakktor

Well-Known Member
Themenstarter #1
Ahoi

habe ein kleines, aber extrem nervendes Problem:

Habe meine Desktop-Maschine wieder mit einem aktuellen FreeBSD 8 versorgt, Stand vor ca. 2 Wochen, installiert mit Snapshot-Image 201002 (amd64).

Danach habe ich erst einmal (wie gewohnt) das Basis-System per c(v)sup mit 8.0-STABLE upgedated und mit folgender Kernel-Config neu gebaut:

Code:
#
# GENERIC -- Generic kernel configuration file for FreeBSD/amd64
#
# For more information on this file, please read the config(5) manual page,
# and/or the handbook section on Kernel Configuration Files:
#
#    http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD: src/sys/amd64/conf/GENERIC,v 1.531.2.8 2010/01/18 00:53:21 imp Exp $

cpu		HAMMER
ident		MONSTER

# To statically compile in device wiring instead of /boot/device.hints
#hints		"GENERIC.hints"		# Default places to look for devices.

# Use the following to compile in values accessible to the kernel
# through getenv() (or kenv(1) in userland). The format of the file
# is 'variable=value', see kenv(1)
#
# env		"GENERIC.env"

#makeoptions	DEBUG=-g		# Build kernel with gdb(1) debug symbols

options 	SCHED_ULE		# ULE scheduler
options 	PREEMPTION		# Enable kernel thread preemption
options 	INET			# InterNETworking
options 	INET6			# IPv6 communications protocols
options 	SCTP			# Stream Control Transmission Protocol
options 	FFS			# Berkeley Fast Filesystem
options 	SOFTUPDATES		# Enable FFS soft updates support
options 	UFS_ACL			# Support for access control lists
options 	UFS_DIRHASH		# Improve performance on big directories
options 	UFS_GJOURNAL		# Enable gjournal-based UFS journaling
options 	MD_ROOT			# MD is a potential root device
options 	NFSCLIENT		# Network Filesystem Client
options 	NFSSERVER		# Network Filesystem Server
options 	NFSLOCKD		# Network Lock Manager
options 	NFS_ROOT		# NFS usable as /, requires NFSCLIENT
options 	MSDOSFS			# MSDOS Filesystem
options 	CD9660			# ISO 9660 Filesystem
options 	PROCFS			# Process filesystem (requires PSEUDOFS)
options 	PSEUDOFS		# Pseudo-filesystem framework
options 	GEOM_PART_GPT		# GUID Partition Tables.
options 	GEOM_LABEL		# Provides labelization
options 	COMPAT_43TTY		# BSD 4.3 TTY compat (sgtty)
options 	COMPAT_IA32		# Compatible with i386 binaries
options 	COMPAT_FREEBSD4		# Compatible with FreeBSD4
options 	COMPAT_FREEBSD5		# Compatible with FreeBSD5
options 	COMPAT_FREEBSD6		# Compatible with FreeBSD6
options 	COMPAT_FREEBSD7		# Compatible with FreeBSD7
options 	SCSI_DELAY=5000		# Delay (in ms) before probing SCSI
options 	KTRACE			# ktrace(1) support
options 	STACK			# stack(9) support
options 	SYSVSHM			# SYSV-style shared memory
options 	SYSVMSG			# SYSV-style message queues
options 	SYSVSEM			# SYSV-style semaphores
options 	P1003_1B_SEMAPHORES	# POSIX-style semaphores
options 	_KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options 	PRINTF_BUFR_SIZE=128	# Prevent printf output being interspersed.
options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev
options 	HWPMC_HOOKS		# Necessary kernel hooks for hwpmc(4)
options 	AUDIT			# Security event auditing
options 	MAC			# TrustedBSD MAC Framework
options		FLOWTABLE		# per-cpu routing cache
#options 	KDTRACE_FRAME		# Ensure frames are compiled in
#options 	KDTRACE_HOOKS		# Kernel DTrace hooks
options 	INCLUDE_CONFIG_FILE     # Include this file in kernel

# Make an SMP-capable kernel by default
options 	SMP			# Symmetric MultiProcessor Kernel

# CPU frequency control
device		cpufreq

# Bus support.
device		acpi
device		pci

# Floppy drives
device		fdc

# ATA and ATAPI devices
device		ata
device		atadisk		# ATA disk drives
device		ataraid		# ATA RAID drives
device		atapicd		# ATAPI CDROM drives
device		atapifd		# ATAPI floppy drives
device		atapist		# ATAPI tape drives
options 	ATA_STATIC_ID	# Static device numbering

# SCSI Controllers
#device		ahc		# AHA2940 and onboard AIC7xxx devices
#options 	AHC_REG_PRETTY_PRINT	# Print register bitfields in debug
					# output.  Adds ~128k to driver.
#device		ahd		# AHA39320/29320 and onboard AIC79xx devices
#options 	AHD_REG_PRETTY_PRINT	# Print register bitfields in debug
					# output.  Adds ~215k to driver.
#device		amd		# AMD 53C974 (Tekram DC-390(T))
#device		hptiop		# Highpoint RocketRaid 3xxx series
#device		isp		# Qlogic family
#device		ispfw		# Firmware for QLogic HBAs- normally a module
#device		mpt		# LSI-Logic MPT-Fusion
#device		ncr		# NCR/Symbios Logic
#device		sym		# NCR/Symbios Logic (newer chipsets + those of `ncr')
#device		trm		# Tekram DC395U/UW/F DC315U adapters

#device		adv		# Advansys SCSI adapters
#device		adw		# Advansys wide SCSI adapters
#device		aic		# Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
#device		bt		# Buslogic/Mylex MultiMaster SCSI adapters

# SCSI peripherals
device		scbus		# SCSI bus (required for SCSI)
device		ch		# SCSI media changers
device		da		# Direct Access (disks)
device		sa		# Sequential Access (tape etc)
device		cd		# CD
device		pass		# Passthrough device (direct SCSI access)
device		ses		# SCSI Environmental Services (and SAF-TE)

# RAID controllers interfaced to the SCSI subsystem
#device		amr		# AMI MegaRAID
#device		arcmsr		# Areca SATA II RAID
#XXX it is not 64-bit clean, -scottl
#device		asr		# DPT SmartRAID V, VI and Adaptec SCSI RAID
#device		ciss		# Compaq Smart RAID 5*
#device		dpt		# DPT Smartcache III, IV - See NOTES for options
#device		hptmv		# Highpoint RocketRAID 182x
#device		hptrr		# Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx
#device		iir		# Intel Integrated RAID
#device		ips		# IBM (Adaptec) ServeRAID
#device		mly		# Mylex AcceleRAID/eXtremeRAID
device		twa		# 3ware 9000 series PATA/SATA RAID

# RAID controllers
#device		aac		# Adaptec FSA RAID
#device		aacp		# SCSI passthrough for aac (requires CAM)
#device		ida		# Compaq Smart RAID
#device		mfi		# LSI MegaRAID SAS
#device		mlx		# Mylex DAC960 family
#XXX pointer/int warnings
#device		pst		# Promise Supertrak SX6000
#device		twe		# 3ware ATA RAID

# atkbdc0 controls both the keyboard and the PS/2 mouse
device		atkbdc		# AT keyboard controller
device		atkbd		# AT keyboard
device		psm		# PS/2 mouse

device		kbdmux		# keyboard multiplexer

device		vga		# VGA video card driver

device		splash		# Splash screen and screen saver support

# syscons is the default console driver, resembling an SCO console
device		sc

device		agp		# support several AGP chipsets

# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
device		cbb		# cardbus (yenta) bridge
device		pccard		# PC Card (16-bit) bus
device		cardbus		# CardBus (32-bit) bus

# Serial (COM) ports
device		uart		# Generic UART driver

# Parallel port
#device		ppc
#device		ppbus		# Parallel port bus (required)
#device		lpt		# Printer
#device		plip		# TCP/IP over parallel
#device		ppi		# Parallel port interface device
#device		vpo		# Requires scbus and da

# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to sio, uart and/or ppc drivers):
#device		puc

# PCI Ethernet NICs.
#device		de		# DEC/Intel DC21x4x (``Tulip'')
device		em		# Intel PRO/1000 Gigabit Ethernet Family
#device		igb		# Intel PRO/1000 PCIE Server Gigabit Family
#device		ixgbe		# Intel PRO/10GbE PCIE Ethernet Family
#device		le		# AMD Am7900 LANCE and Am79C9xx PCnet
#device		ti		# Alteon Networks Tigon I/II gigabit Ethernet
#device		txp		# 3Com 3cR990 (``Typhoon'')
#device		vx		# 3Com 3c590, 3c595 (``Vortex'')

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device		miibus		# MII bus support
#device		ae		# Attansic/Atheros L2 FastEthernet
#device		age		# Attansic/Atheros L1 Gigabit Ethernet
#device		alc		# Atheros AR8131/AR8132 Ethernet
#device		ale		# Atheros AR8121/AR8113/AR8114 Ethernet
#device		bce		# Broadcom BCM5706/BCM5708 Gigabit Ethernet
#device		bfe		# Broadcom BCM440x 10/100 Ethernet
#device		bge		# Broadcom BCM570xx Gigabit Ethernet
#device		dc		# DEC/Intel 21143 and various workalikes
#device		et		# Agere ET1310 10/100/Gigabit Ethernet
#device		fxp		# Intel EtherExpress PRO/100B (82557, 82558)
#device		jme		# JMicron JMC250 Gigabit/JMC260 Fast Ethernet
#device		lge		# Level 1 LXT1001 gigabit Ethernet
#device		msk		# Marvell/SysKonnect Yukon II Gigabit Ethernet
device		nfe		# nVidia nForce MCP on-board Ethernet
#device		nge		# NatSemi DP83820 gigabit Ethernet
#device		nve		# nVidia nForce MCP on-board Ethernet Networking
#device		pcn		# AMD Am79C97x PCI 10/100 (precedence over 'le')
#device		re		# RealTek 8139C+/8169/8169S/8110S
#device		rl		# RealTek 8129/8139
#device		sf		# Adaptec AIC-6915 (``Starfire'')
#device		sis		# Silicon Integrated Systems SiS 900/SiS 7016
#device		sk		# SysKonnect SK-984x & SK-982x gigabit Ethernet
#device		ste		# Sundance ST201 (D-Link DFE-550TX)
#device		stge		# Sundance/Tamarack TC9021 gigabit Ethernet
#device		tl		# Texas Instruments ThunderLAN
#device		tx		# SMC EtherPower II (83c170 ``EPIC'')
#device		vge		# VIA VT612x gigabit Ethernet
#device		vr		# VIA Rhine, Rhine II
#device		wb		# Winbond W89C840F
#device		xl		# 3Com 3c90x (``Boomerang'', ``Cyclone'')

# ISA Ethernet NICs.  pccard NICs included.
#device		cs		# Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
#device		ed		# NE[12]000, SMC Ultra, 3c503, DS8390 cards
#device		ex		# Intel EtherExpress Pro/10 and Pro/10+
#device		ep		# Etherlink III based cards
#device		fe		# Fujitsu MB8696x based cards
#device		sn		# SMC's 9000 series of Ethernet chips
device		xe		# Xircom pccard Ethernet

# Wireless NIC cards
#device		wlan		# 802.11 support
#options 	IEEE80211_DEBUG	# enable debug msgs
#options 	IEEE80211_AMPDU_AGE # age frames in AMPDU reorder q's
#options 	IEEE80211_SUPPORT_MESH	# enable 802.11s draft support
#device		wlan_wep	# 802.11 WEP support
#device		wlan_ccmp	# 802.11 CCMP support
#device		wlan_tkip	# 802.11 TKIP support
#device		wlan_amrr	# AMRR transmit rate control algorithm
#device		an		# Aironet 4500/4800 802.11 wireless NICs.
#device		ath		# Atheros pci/cardbus NIC's
#device		ath_hal		# pci/cardbus chip support
#options 	AH_SUPPORT_AR5416	# enable AR5416 tx/rx descriptors
#device		ath_rate_sample	# SampleRate tx rate control for ath
#device		ral		# Ralink Technology RT2500 wireless NICs.
#device		wi		# WaveLAN/Intersil/Symbol 802.11 wireless NICs.

# Pseudo devices.
device		loop		# Network loopback
device		random		# Entropy device
device		ether		# Ethernet support
device		vlan		# 802.1Q VLAN support
device		tun		# Packet tunnel.
device		pty		# BSD-style compatibility pseudo ttys
device		md		# Memory "disks"
device		gif		# IPv6 and IPv4 tunneling
device		faith		# IPv6-to-IPv4 relaying (translation)
device		firmware	# firmware assist module

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device		bpf		# Berkeley packet filter

# USB support
device		uhci		# UHCI PCI->USB interface
device		ohci		# OHCI PCI->USB interface
device		ehci		# EHCI PCI->USB interface (USB 2.0)
device		usb		# USB Bus (required)
#device		udbp		# USB Double Bulk Pipe devices
device		uhid		# "Human Interface Devices"
device		ukbd		# Keyboard
device		ulpt		# Printer
device		umass		# Disks/Mass storage - Requires scbus and da
device		ums		# Mouse
#device		urio		# Diamond Rio 500 MP3 player
# USB Serial devices
#device		uark		# Technologies ARK3116 based serial adapters
#device		ubsa		# Belkin F5U103 and compatible serial adapters
#device		uftdi		# For FTDI usb serial adapters
#device		uipaq		# Some WinCE based devices
#device		uplcom		# Prolific PL-2303 serial adapters
#device		uslcom		# SI Labs CP2101/CP2102 serial adapters
#device		uvisor		# Visor and Palm devices
#device		uvscom		# USB serial support for DDI pocket's PHS
# USB Ethernet, requires miibus
#device		aue		# ADMtek USB Ethernet
#device		axe		# ASIX Electronics USB Ethernet
#device		cdce		# Generic USB over Ethernet
#device		cue		# CATC USB Ethernet
#device		kue		# Kawasaki LSI USB Ethernet
#device		rue		# RealTek RTL8150 USB Ethernet
#device		udav		# Davicom DM9601E USB
# USB Wireless
#device		rum		# Ralink Technology RT2501USB wireless NICs
#device		uath		# Atheros AR5523 wireless NICs
#device		ural		# Ralink Technology RT2500USB wireless NICs
#device		zyd		# ZyDAS zb1211/zb1211b wireless NICs

# FireWire support
device		firewire	# FireWire bus code
#device		sbp		# SCSI over FireWire (Requires scbus and da)
device		fwe		# Ethernet over FireWire (non-standard!)
device		fwip		# IP over FireWire (RFC 2734,3146)
device		dcons		# Dumb console driver
device		dcons_crom	# Configuration ROM for dcons

device          atapicam
device          coretemp

device          sound
device          snd_hda

#options		DEVICE_POLLING
#options		HZ=1000

device		pf
device		pflog
device		pfsync

options         ALTQ
options         ALTQ_CBQ        # Class Bases Queuing (CBQ)
options         ALTQ_RED        # Random Early Detection (RED)
options         ALTQ_RIO        # RED In/Out
options         ALTQ_HFSC       # Hierarchical Packet Scheduler (HFSC)
options         ALTQ_PRIQ       # Priority Queuing (PRIQ)
options         ALTQ_NOPCC      # Required for SMP build
Problem nun:
Bei einem Reboot hängt die Maschine bei
Code:
.. blah.. Syncing disks ... blah ...

Stopping other CPUs <hier tot>
Danach passiert nichts mehr, CPU Lüfter schaltet ne Stufe hoch, als wär dicke Last drauf. Nur ein Reset oder Ausschalten hilft.

Hier noch ein dmesg vom letzten Boot:
Code:
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-STABLE #0: Thu Apr  8 23:10:44 CEST 2010
    root@monster.schubduese.intern:/usr/obj/usr/src/sys/MONSTER amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Quad CPU           @ 2.40GHz (2598.76-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x6f7  Family = 6  Model = f  Stepping = 7
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 8589934592 (8192 MB)
avail memory = 8221872128 (7840 MB)
ACPI APIC Table: <Nvidia NVDAACPI>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
ioapic0: Changing APIC ID to 4
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <Nvidia NVDAACPI> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 9fdf0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfeff0000-0xfeff03ff on acpi0
device_attach: acpi_hpet0 attach returned 12
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
pci0: <memory, RAM> at device 0.6 (no driver attached)
pci0: <memory, RAM> at device 0.7 (no driver attached)
pci0: <memory, RAM> at device 1.0 (no driver attached)
pci0: <memory, RAM> at device 1.1 (no driver attached)
pci0: <memory, RAM> at device 1.2 (no driver attached)
pci0: <memory, RAM> at device 1.3 (no driver attached)
pci0: <memory, RAM> at device 1.4 (no driver attached)
pci0: <memory, RAM> at device 1.5 (no driver attached)
pci0: <memory, RAM> at device 1.6 (no driver attached)
pci0: <memory, RAM> at device 2.0 (no driver attached)
pci0: <memory, RAM> at device 2.1 (no driver attached)
pci0: <memory, RAM> at device 2.2 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <PCI-PCI bridge> at device 0.0 on pci1
pci2: <PCI bus> on pcib2
pcib3: <PCI-PCI bridge> at device 0.0 on pci2
pci3: <PCI bus> on pcib3
vgapci0: <VGA-compatible display> port 0xdc00-0xdc7f mem 0xcc000000-0xccffffff,0xb0000000-0xbfffffff,0xca000000-0xcbffffff irq 16 at device 0.0 on pci3
nvidia0: <GeForce GTX 295> on vgapci0
vgapci0: child nvidia0 requested pci_enable_busmaster
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
nvidia0: [ITHREAD]
pcib4: <PCI-PCI bridge> at device 2.0 on pci2
pci4: <PCI bus> on pcib4
vgapci1: <VGA-compatible display> port 0xcc00-0xcc7f mem 0xc8000000-0xc8ffffff,0xa0000000-0xafffffff,0xc6000000-0xc7ffffff irq 16 at device 0.0 on pci4
nvidia1: <GeForce GTX 295> on vgapci1
vgapci1: child nvidia1 requested pci_enable_busmaster
vgapci1: child nvidia1 requested pci_enable_io
vgapci1: child nvidia1 requested pci_enable_io
nvidia1: [ITHREAD]
pci0: <memory, RAM> at device 9.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0xfc00-0xfc7f at device 10.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 10.1 (no driver attached)
pci0: <memory, RAM> at device 10.2 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xcffff000-0xcfffffff irq 20 at device 11.0 on pci0
ohci0: [ITHREAD]
usbus0: <OHCI (generic) USB controller> on ohci0
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xcfffe000-0xcfffe0ff irq 21 at device 11.1 on pci0
ehci0: [ITHREAD]
usbus1: EHCI version 1.0
usbus1: <EHCI (generic) USB 2.0 controller> on ehci0
atapci0: <nVidia nForce MCP55 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xec00-0xec0f at device 13.0 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pcib5: <ACPI PCI-PCI bridge> at device 15.0 on pci0
pci5: <ACPI PCI bus> on pcib5
em0: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0xbc00-0xbc3f mem 0xcfde0000-0xcfdfffff,0xcfdc0000-0xcfddffff irq 17 at device 9.0 on pci5
em0: [FILTER]
em0: Ethernet address: 00:1b:21:34:d7:ad
hdac0: <NVidia MCP55 High Definition Audio Controller> mem 0xcfff4000-0xcfff7fff irq 22 at device 15.1 on pci0
hdac0: HDA Driver Revision: 20100226_0142
hdac0: [ITHREAD]
nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0xe800-0xe807 mem 0xcfffd000-0xcfffdfff,0xcfffc000-0xcfffc0ff,0xcfffb000-0xcfffb00f irq 23 at device 17.0 on pci0
miibus0: <MII bus> on nfe0
e1000phy0: <Marvell 88E1116 Gigabit PHY> PHY 1 on miibus0
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
nfe0: Ethernet address: 00:04:4b:01:16:7d
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe1: <NVIDIA nForce MCP55 Networking Adapter> port 0xe400-0xe407 mem 0xcfffa000-0xcfffafff,0xcfff9000-0xcfff90ff,0xcfff8000-0xcfff800f irq 20 at device 18.0 on pci0
miibus1: <MII bus> on nfe1
e1000phy1: <Marvell 88E1116 Gigabit PHY> PHY 2 on miibus1
e1000phy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
nfe1: Ethernet address: 00:04:4b:01:16:7e
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
pcib6: <ACPI PCI-PCI bridge> at device 24.0 on pci0
pci6: <ACPI PCI bus> on pcib6
3ware device driver for 9000 series storage controllers, version: 3.70.05.001
twa0: <3ware 9000 series Storage Controller> port 0xac00-0xacff mem 0xc4000000-0xc5ffffff,0xcfcff000-0xcfcfffff irq 16 at device 0.0 on pci6
twa0: [ITHREAD]
twa0: INFO: (0x15: 0x1300): Controller details:: Model 9650SE-4LPML, 4 ports, Firmware FE9X 4.10.00.007, BIOS BE9X 4.08.00.002
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd3fff,0xd4000-0xd57ff,0xd6000-0xd7fff,0xd8000-0xd8fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 926092606000926
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 926092606000926
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 926092606000926
device_attach: est2 attach returned 6
p4tcc2: <CPU Frequency Thermal Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 926092606000926
device_attach: est3 attach returned 6
p4tcc3: <CPU Frequency Thermal Control> on cpu3
Timecounters tick every 1.000 msec
vboxdrv: fAsync=0 offMin=0x195 offMax=0x3b1
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <nVidia> at usbus0
uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <nVidia> at usbus1
uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
acd0: DVDR <HL-DT-ST DVDRAM GSA-H12L/VL01> at ata0-master UDMA66 
hdac0: HDA Codec #0: Realtek ALC885
pcm0: <HDA Realtek ALC885 PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm1: <HDA Realtek ALC885 PCM #1 Digital> at cad 0 nid 1 on hdac0
uhub0: 10 ports with 10 removable, self powered
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x01
da0 at twa0 bus 0 scbus0 target 0 lun 0
da0: <AMCC 9650SE-4LP DISK 4.10> Fixed Direct Access SCSI-5 device 
da0: 100.000MB/s transfers
da0: 476816MB (976519168 512 byte sectors: 255H 63S/T 60785C)
da1 at twa0 bus 0 scbus0 target 1 lun 0
da1: <AMCC 9650SE-4LP DISK 4.10> Fixed Direct Access SCSI-5 device 
da1: 100.000MB/s transfers
da1: 572184MB (1171832832 512 byte sectors: 255H 63S/T 72943C)
cd0 at ata0 bus 0 scbus1 target 0 lun 0
cd0: <HL-DT-ST DVDRAM GSA-H12L VL01> Removable CD-ROM SCSI-0 device 
cd0: 66.000MB/s transfers
cd0: cd present [2832864 x 2048 byte records]
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
uhub1: 10 ports with 10 removable, self powered
GEOM: da1: partition 3 does not start on a track boundary.
GEOM: da1: partition 3 does not end on a track boundary.
GEOM: da1: partition 2 does not start on a track boundary.
GEOM: da1: partition 2 does not end on a track boundary.
GEOM: da1: partition 1 does not start on a track boundary.
GEOM: da1: partition 1 does not end on a track boundary.
Root mount waiting for: usbus1
ugen0.2: <NEC> at usbus0
umass0: <NEC NEC USB UF000x, class 0/0, rev 1.10/1.60, addr 2> on usbus0
umass0:  UFI over CBI with CCI; quirks = 0x0000
Root mount waiting for: usbus1
umass0:2:0:-1: Attached to scbus2
Root mount waiting for: usbus1
ugen1.2: <Generic> at usbus1
umass1: <Generic Mass Storage Device, class 0/0, rev 2.00/1.26, addr 2> on usbus1
umass1:  SCSI over Bulk-Only; quirks = 0x0000
ugen0.3: <Razer> at usbus0
ums0: <Razer Razer Salmosa, class 0/0, rev 2.00/1.00, addr 3> on usbus0
ums0: 7 buttons and [XYZ] coordinates ID=0
Root mount waiting for: usbus1
umass1:3:1:-1: Attached to scbus3
Trying to mount root from ufs:/dev/da0s1a
ugen0.4: <vendor 0x0dc6> at usbus0
uhub2: <USB Keyboard + 2P Hub> on usbus0
(probe1:umass-sim1:1:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe1:umass-sim1:1:0:0): CAM status: SCSI Status Error
(probe1:umass-sim1:1:0:0): SCSI status: Check Condition
(probe1:umass-sim1:1:0:0): SCSI sense: NOT READY csi:0,aa,55,40 asc:3a,0 (Medium not present)
uhub2: 3 ports with 2 removable, bus powered
da2 at umass-sim1 bus 1 scbus3 target 0 lun 0
da2: <Generic USB SD Reader 1.00> Removable Direct Access SCSI-0 device 
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
ugen0.5: <vendor 0x0dc6> at usbus0
ukbd0: <USB Keyboard + 2P Hub> on usbus0
kbd2 at ukbd0
uhid0: <USB Keyboard + 2P Hub> on usbus0
(probe1:umass-sim1:1:0:1): TEST UNIT READY. CDB: 0 20 0 0 0 0 
(probe1:umass-sim1:1:0:1): CAM status: SCSI Status Error
(probe1:umass-sim1:1:0:1): SCSI status: Check Condition
(probe1:umass-sim1:1:0:1): SCSI sense: NOT READY csi:0,aa,55,40 asc:3a,0 (Medium not present)
da3 at umass-sim1 bus 1 scbus3 target 0 lun 1
da3: <Generic USB CF Reader 1.01> Removable Direct Access SCSI-0 device 
da3: 40.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
(probe1:umass-sim1:1:0:2): TEST UNIT READY. CDB: 0 40 0 0 0 0 
(probe1:umass-sim1:1:0:2): CAM status: SCSI Status Error
(probe1:umass-sim1:1:0:2): SCSI status: Check Condition
(probe1:umass-sim1:1:0:2): SCSI sense: NOT READY csi:0,aa,55,40 asc:3a,0 (Medium not present)
da4 at umass-sim1 bus 1 scbus3 target 0 lun 2
da4: <Generic USB SM Reader 1.02> Removable Direct Access SCSI-0 device 
da4: 40.000MB/s transfers
da4: Attempt to query device size failed: NOT READY, Medium not present
(probe1:umass-sim1:1:0:3): TEST UNIT READY. CDB: 0 60 0 0 0 0 
(probe1:umass-sim1:1:0:3): CAM status: SCSI Status Error
(probe1:umass-sim1:1:0:3): SCSI status: Check Condition
(probe1:umass-sim1:1:0:3): SCSI sense: NOT READY csi:0,aa,55,40 asc:3a,0 (Medium not present)
da5 at umass-sim1 bus 1 scbus3 target 0 lun 3
da5: <Generic USB MS Reader 1.03> Removable Direct Access SCSI-0 device 
da5: 40.000MB/s transfers
da5: Attempt to query device size failed: NOT READY, Medium not present
vboxnet0: Ethernet address: 0a:00:27:00:00:00
(da6:umass-sim0:0:0:0): got CAM status 0x4
(da6:umass-sim0:0:0:0): fatal error, failed to attach to device
(da6:umass-sim0:0:0:0): lost device
em0: link state changed to UP
(da6:umass-sim0:0:0:0): removing device entry
nfe0: link state changed to UP
Ich bin etwas ratlos, habe einiges über Reboot Deadlocks gelesen, die dem Problem sehr nahekommen, aber die Geschichten betrafen zu 99% FreeBSD7 Beta mit SCHED_ULE oder uralte Probleme mit FreeBSD 4/5.

Bin nich der Kernel-Debug-Meister - wäre für alle Tips dankbar, wo ich zu suchen anfangen kann...

greetz
reakktor

edit:

Großer Nachtrag

Mit Eintrag in
Code:
>> "/boot/loader.conf"
kernel="GENERIC"
kann ich ganz normal rebooten. Baue ich die Maschine mit KERNCONF=GENERIC direkt aus den Sourcen, tritt das selbe Problem auf.
 
Zuletzt bearbeitet:

reakktor

Well-Known Member
Themenstarter #5
Habe nun eine andere Maschine mit gleichem Symptom:

- frisch installiert mit 8.0-Release-CD (amd64)
- csup auf 8.0-Stable
- make buildworld && make buildkernel KERNCONF=GENERIC (nix gefummelt) && make installkernel KERNCONF=GENERIC, ab in den singleuser, dann make installworld
- "shutdown -r now" *zwinker* mit altem Kernel funzt noch
- "shutdown -r now" nach Boot mit neuem Kernel -> Hänger bei "Stopping other CPUs"

Habe (extra) keine angepasste make.conf, reine GENERIC-config aus den Sourcen, damit auch kein atapicam wie vorgeschlagen.

Nun werde ich langsam stutzig, dies ist eine komplett andere Maschine, Hardware bis auf Prozessor grundverschieden. Einzige Gemeinsamkeit: gleicher Prozessor = Intel Q6600. Irgendwas muss sich da getan haben...

Ich schliesse nicht aus, dass ich was falsch mache, aber ich hab so schon mehrere Dutzend Rechner installiert/upgedatet, nur mit den Sourcen seit April habe ich scheinbar ein echtes Problem....
 
Zuletzt bearbeitet:

Morfio

Well-Known Member
#6
Hi,

ich kann das Problem bestätigen, weiß aber auch noch nicht, woran es liegt. Es tritt auch nicht immer bei mir auf.

Viele Grüße, Morfio
 

reakktor

Well-Known Member
Themenstarter #7
Melde teilweisen Erfolg:

Nach cvsup 2010.06.22 auf ports und stable (make buildworld, installkernel usw.) UND portupgrade -a (mit der Update Hölle php5, libassuan, phonon usw.., check UPDATING) , funktioniert der reboot aus Gnome heraus wieder.

Ein "shutdown -r now" oder "reboot" bringt noch den Hänger wie erwähnt.

Macht mich etwas stutzig, was macht das reboot-Kommando per Gnome anders, damit es funktioniert ?!?
 
Zuletzt bearbeitet:

reakktor

Well-Known Member
Themenstarter #8
Problem gelöst

Problem ist gelöst - nach Update auf Source per RELENG_8 (27.6.2010, 8.1-PRERELEASE) und komplettem Neubauen mit buildworld+buildkernel(+mergemaster danach) gibt's das o.g. Problem nicht mehr.
 
Zuletzt bearbeitet: