Homeserver auf HP Proliant ML10v2

C

carver

Member
Seit mittlerweile 10 Tagen läuft mein neuer Homeserver auf FreeBSD 10.2. Migriert habe ich von CentOS 7.2.
Das Teil läuft 1a mit einer OS-Disk und zwei WD-Red 3TB im ZFS Mirror.
Sollte jemand ebenfalls planen einen Server auf dieser Hardware mit FreeBSD aufzubauen und möglicherweise irgendwelche Angaben (pciconf o.ä) vor dem Kauf benötigen bzw. wissen wollen, so kann ich da gerne behilflich sein.
 
Sehr gerne. Ich hoffe ich habe das richtig gemacht, dass mit den code-tags:

Code: 
# dmesg
Copyright (c) 1992-2015 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.2-RELEASE-p9 #0: Thu Jan 14 01:32:46 UTC 2016
    root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
CPU: Intel(R) Pentium(R) CPU G3240 @ 3.10GHz (3092.90-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306c3  Family=0x6  Model=0x3c  Stepping=3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x4ddaebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,<b11>,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,XSAVE,OSXSAVE,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x21<LAHF,ABM>
  Structured Extended Features=0x2603<FSGSBASE,TSCADJ,ERMS,INVPCID,NFPUSG>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8250654720 (7868 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <HP     ProLiant>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID:  0
cpu1 (AP): APIC ID:  2
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20150515/tbfadt-644)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm2ControlBlock: 8/32 (20150515/tbfadt-644)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20150515/tbfadt-725)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20150515/tbfadt-725)
ioapic0: Changing APIC ID to 8
ioapic0 <Version 2.0> irqs 0-23 on motherboard
random: <Software, Yarrow> initialized
kbd1 at kbdmux0
acpi0: <HP ProLiant> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
Event timer "HPET5" frequency 14318180 Hz quality 440
Event timer "HPET6" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci4: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 1.1 on pci0
pci7: <ACPI PCI bus> on pcib2
xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xfacf0000-0xfacfffff at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xface0000-0xface03ff irq 21 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
pcib3: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci10: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pci2: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 28.5 on pci0
pci3: <ACPI PCI bus> on pcib5
bge0: <HP Ethernet 1Gb 2-port 332i Adapter, ASIC rev. 0x5720000> mem 0xfabf0000-0xfabfffff,0xfabe0000-0xfabeffff,0xfabd0000-0xfabdffff irq 17 at device 0.0 on pci3
bge0: APE FW version: NCSI v1.3.12.0
bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Using defaults for TSO: 65518/35/2048
bge0: Ethernet address: 30:8d:99:cc:17:74
bge1: <HP Ethernet 1Gb 2-port 332i Adapter, ASIC rev. 0x5720000> mem 0xfabc0000-0xfabcffff,0xfabb0000-0xfabbffff,0xfaba0000-0xfabaffff irq 18 at device 0.1 on pci3
bge1: APE FW version: NCSI v1.3.12.0
bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
miibus1: <MII bus> on bge1
brgphy1: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Using defaults for TSO: 65518/35/2048
bge1: Ethernet address: 30:8d:99:cc:17:75
pcib6: <ACPI PCI-PCI bridge> at device 28.6 on pci0
pci13: <ACPI PCI bus> on pcib6
em0: <Intel(R) PRO/1000 Network Connection 7.4.2> port 0x5000-0x501f mem 0xfbfe0000-0xfbffffff,0xfbfc0000-0xfbfdffff irq 18 at device 0.0 on pci13
em0: Using an MSI interrupt
em0: Ethernet address: 00:1f:29:58:99:a6
em1: <Intel(R) PRO/1000 Network Connection 7.4.2> port 0x5020-0x503f mem 0xfbfa0000-0xfbfbffff,0xfbf80000-0xfbf9ffff irq 19 at device 0.1 on pci13
em1: Using an MSI interrupt
em1: Ethernet address: 00:1f:29:58:99:a7
pcib7: <ACPI PCI-PCI bridge> at device 28.7 on pci0
pci1: <ACPI PCI bus> on pcib7
vgapci0: <VGA-compatible display> mem 0xf9000000-0xf9ffffff,0xfbee0000-0xfbee3fff,0xfb000000-0xfb7fffff irq 16 at device 0.1 on pci1
vgapci0: Boot video device
uhci0: <UHCI (generic) USB controller> port 0x4000-0x401f irq 16 at device 0.4 on pci1
usbus2 on uhci0
ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xfacd0000-0xfacd03ff irq 20 at device 29.0 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Lynx Point AHCI SATA controller> port 0x1000-0x1007,0x1008-0x100b,0x1010-0x1017,0x1018-0x101b,0x1020-0x103f mem 0xfacc0000-0xfacc07ff irq 17 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xcffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
uart1: <Non-standard ns8250 class UART with FIFOs> at port 0x2f8-0x2ff irq 3 on isa0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 22e100001f00
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 22e100001f00
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Timecounters tick every 1.000 msec
random: unblocking device.
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ugen0.1: <0x8086> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen3.1: <Intel> at usbus3
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen2.1: <0x103c> at usbus2
uhub2: <0x103c UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen1.1: <Intel> at usbus1
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD1600BEKT-00PVMT0 01.01A01> ATA8-ACS SATA 2.x device
ada0: Serial Number WD-WX91A2172754
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 152627MB (312581808 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <WDC WD30EFRX-68EUZN0 82.00A82> ACS-2 ATA SATA 3.x device
ada1: Serial Number WD-WCC4N6SJP7EH
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
ada1: quirks=0x1<4K>
cd0 at ahcich5 bus 0 scbus5 target 0 lun 0
cd0: <HL-DT-ST DVDRAM GH24NSC0 LK00> Removable CD-ROM SCSI device
cd0: Serial Number K28F6G85019
cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes)
cd0: cd present [1 x 0 byte records]
ada1: Previously was known as ad6
ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
ada2: <WDC WD30EFRX-68EUZN0 80.00A80> ACS-2 ATA SATA 3.x device
ada2: Serial Number WD-WCC4N0861073
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
ada2: quirks=0x1<4K>
ada2: Previously was known as ad8
SMP: AP CPU #1 Launched!
Timecounter "TSC-low" frequency 1546451622 Hz quality 1000
uhub2: 2 ports with 2 removable, self powered
Root mount waiting for: usbus3 usbus1 usbus0
uhub1: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub0: 21 ports with 21 removable, self powered
ugen3.2: <vendor 0x8087> at usbus3
uhub4: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus3
ugen1.2: <vendor 0x8087> at usbus1
uhub5: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> on usbus1
Root mount waiting for: usbus3 usbus1
uhub5: 4 ports with 4 removable, self powered
uhub4: 6 ports with 6 removable, self powered
Trying to mount root from ufs:/dev/ada0p2 [rw]...
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)

Code: 
# pciconf -l -a
usage: pciconf -l [-bcevV] [device]
       pciconf -a device
       pciconf -r [-b | -h] device addr[:addr2]
       pciconf -w [-b | -h] device addr value
root@server:~ # pciconf -l -v
hostb0@pci0:0:0:0:    class=0x060000 card=0x00000000 chip=0x0c008086 rev=0x06 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Haswell DRAM Controller'
    class      = bridge
    subclass   = HOST-PCI
pcib1@pci0:0:1:0:    class=0x060400 card=0x330b103c chip=0x0c018086 rev=0x06 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'Haswell PCI Express x16 Controller'
    class      = bridge
    subclass   = PCI-PCI
pcib2@pci0:0:1:1:    class=0x060400 card=0x330b103c chip=0x0c058086 rev=0x06 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'Haswell PCI Express x8 Controller'
    class      = bridge
    subclass   = PCI-PCI
xhci0@pci0:0:20:0:    class=0x0c0330 card=0x330d103c chip=0x8c318086 rev=0x04 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Lynx Point USB xHCI Host Controller'
    class      = serial bus
    subclass   = USB
ehci0@pci0:0:26:0:    class=0x0c0320 card=0x330d103c chip=0x8c2d8086 rev=0x04 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Lynx Point USB Enhanced Host Controller'
    class      = serial bus
    subclass   = USB
pcib3@pci0:0:28:0:    class=0x060400 card=0x330d103c chip=0x8c108086 rev=0xd4 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'Lynx Point PCI Express Root Port'
    class      = bridge
    subclass   = PCI-PCI
pcib4@pci0:0:28:4:    class=0x060400 card=0x330d103c chip=0x8c188086 rev=0xd4 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'Lynx Point PCI Express Root Port'
    class      = bridge
    subclass   = PCI-PCI
pcib5@pci0:0:28:5:    class=0x060400 card=0x330d103c chip=0x8c1a8086 rev=0xd4 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'Lynx Point PCI Express Root Port'
    class      = bridge
    subclass   = PCI-PCI
pcib6@pci0:0:28:6:    class=0x060400 card=0x330d103c chip=0x8c1c8086 rev=0xd4 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'Lynx Point PCI Express Root Port'
    class      = bridge
    subclass   = PCI-PCI
pcib7@pci0:0:28:7:    class=0x060400 card=0x330d103c chip=0x8c1e8086 rev=0xd4 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'Lynx Point PCI Express Root Port'
    class      = bridge
    subclass   = PCI-PCI
ehci1@pci0:0:29:0:    class=0x0c0320 card=0x330d103c chip=0x8c268086 rev=0x04 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Lynx Point USB Enhanced Host Controller'
    class      = serial bus
    subclass   = USB
isab0@pci0:0:31:0:    class=0x060100 card=0x00000000 chip=0x8c528086 rev=0x04 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Lynx Point LPC Controller'
    class      = bridge
    subclass   = PCI-ISA
ahci0@pci0:0:31:2:    class=0x010601 card=0x330d103c chip=0x8c028086 rev=0x04 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Lynx Point 6-port SATA Controller 1 [AHCI mode]'
    class      = mass storage
    subclass   = SATA
bge0@pci0:3:0:0:    class=0x020000 card=0x2133103c chip=0x165f14e4 rev=0x00 hdr=0x00
    vendor     = 'Broadcom Corporation'
    device     = 'NetXtreme BCM5720 Gigabit Ethernet PCIe'
    class      = network
    subclass   = ethernet
bge1@pci0:3:0:1:    class=0x020000 card=0x2133103c chip=0x165f14e4 rev=0x00 hdr=0x00
    vendor     = 'Broadcom Corporation'
    device     = 'NetXtreme BCM5720 Gigabit Ethernet PCIe'
    class      = network
    subclass   = ethernet
em0@pci0:13:0:0:    class=0x020000 card=0x7044103c chip=0x105e8086 rev=0x06 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82571EB Gigabit Ethernet Controller'
    class      = network
    subclass   = ethernet
em1@pci0:13:0:1:    class=0x020000 card=0x7044103c chip=0x105e8086 rev=0x06 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82571EB Gigabit Ethernet Controller'
    class      = network
    subclass   = ethernet
none0@pci0:1:0:0:    class=0x088000 card=0x3381103c chip=0x3306103c rev=0x05 hdr=0x00
    vendor     = 'Hewlett-Packard Company'
    device     = 'Integrated Lights-Out Standard Slave Instrumentation & System Support'
    class      = base peripheral
vgapci0@pci0:1:0:1:    class=0x030000 card=0x3381103c chip=0x0533102b rev=0x00 hdr=0x00
    vendor     = 'Matrox Electronics Systems Ltd.'
    device     = 'MGA G200EH'
    class      = display
    subclass   = VGA
none1@pci0:1:0:2:    class=0x088000 card=0x3381103c chip=0x3307103c rev=0x05 hdr=0x00
    vendor     = 'Hewlett-Packard Company'
    device     = 'Integrated Lights-Out Standard Management Processor Support and Messaging'
    class      = base peripheral
uhci0@pci0:1:0:4:    class=0x0c0300 card=0x3381103c chip=0x3300103c rev=0x02 hdr=0x00
    vendor     = 'Hewlett-Packard Company'
    device     = 'Integrated Lights-Out Standard Virtual USB Controller'
    class      = serial bus
    subclass   = USB

Code: 
# camcontrol devlist
<WDC WD1600BEKT-00PVMT0 01.01A01>  at scbus0 target 0 lun 0 (ada0,pass0)
<WDC WD30EFRX-68EUZN0 82.00A82>    at scbus1 target 0 lun 0 (ada1,pass1)
<WDC WD30EFRX-68EUZN0 80.00A80>    at scbus2 target 0 lun 0 (ada2,pass2)
<HL-DT-ST DVDRAM GH24NSC0 LK00>    at scbus5 target 0 lun 0 (pass3,cd0)
<AHCI SGPIO Enclosure 1.00 0001>   at scbus6 target 0 lun 0 (pass4,ses0)
 
Habe 2 ML10 als Backup-Nodes im 3-Node Proxmox-Cluster laufen. FreeBSD nur virtualisiert aber läuft einwandfrei.
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Zurück
Oben