• Diese Seite verwendet Cookies. Indem du diese Website weiterhin nutzt, erklärst du dich mit der Verwendung von Cookies einverstanden. Erfahre mehr

Intel n6300

Themenstarter #1
Hey,

ich hab mir auf einem älteren Lenovo Thinkpad x230 FreeBSD 11 installiert und stellte fest, dass die eingebaute Realtek Wifi-Karte nicht funktioniert und auch nicht unterstützt wird. Daher habe ich mir eine Intel N6300 besorgt und eingebaut. Soweit so gut.
Nun funktioniert das Ganze leider nicht, wobei ich nicht weiß, woran es liegt.

Code:
sudo pciconf -lvc
hostb0@pci0:0:0:0:    class=0x060000 card=0x21fa17aa chip=0x01548086 rev=0x09 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '3rd Gen Core processor DRAM Controller'
    class      = bridge
    subclass   = HOST-PCI
    cap 09[e0] = vendor (length 12) Intel cap 0 version 1
vgapci0@pci0:0:2:0:    class=0x030000 card=0x21fa17aa chip=0x01668086 rev=0x09 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '3rd Gen Core processor Graphics Controller'
    class      = display
    subclass   = VGA
    cap 05[90] = MSI supports 1 message enabled with 1 message
    cap 01[d0] = powerspec 2  supports D0 D3  current D0
    cap 13[a4] = PCI Advanced Features: FLR TP
xhci0@pci0:0:20:0:    class=0x0c0330 card=0x21fa17aa chip=0x1e318086 rev=0x04 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '7 Series/C210 Series Chipset Family USB xHCI Host Controller'
    class      = serial bus
    subclass   = USB
    cap 01[70] = powerspec 2  supports D0 D3  current D0
    cap 05[80] = MSI supports 8 messages, 64 bit enabled with 1 message
none0@pci0:0:22:0:    class=0x078000 card=0x21fa17aa chip=0x1e3a8086 rev=0x04 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '7 Series/C216 Chipset Family MEI Controller'
    class      = simple comms
    cap 01[50] = powerspec 3  supports D0 D3  current D0
    cap 05[8c] = MSI supports 1 message, 64 bit
em0@pci0:0:25:0:    class=0x020000 card=0x21f317aa chip=0x15028086 rev=0x04 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82579LM Gigabit Network Connection'
    class      = network
    subclass   = ethernet
    cap 01[c8] = powerspec 2  supports D0 D3  current D0
    cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message
    cap 13[e0] = PCI Advanced Features: FLR TP
ehci0@pci0:0:26:0:    class=0x0c0320 card=0x21fa17aa chip=0x1e2d8086 rev=0x04 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '7 Series/C216 Chipset Family USB Enhanced Host Controller'
    class      = serial bus
    subclass   = USB
    cap 01[50] = powerspec 2  supports D0 D3  current D0
    cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14
    cap 13[98] = PCI Advanced Features: FLR TP
hdac0@pci0:0:27:0:    class=0x040300 card=0x21fa17aa chip=0x1e208086 rev=0x04 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '7 Series/C216 Chipset Family High Definition Audio Controller'
    class      = multimedia
    subclass   = HDA
    cap 01[50] = powerspec 2  supports D0 D3  current D0
    cap 05[60] = MSI supports 1 message, 64 bit enabled with 1 message
    cap 10[70] = PCI-Express 1 root endpoint max data 128(128) FLR NS
    ecap 0002[100] = VC 1 max VC1
    ecap 0005[130] = Root Complex Link Declaration 1
pcib1@pci0:0:28:0:    class=0x060400 card=0x21fa17aa chip=0x1e108086 rev=0xc4 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '7 Series/C216 Chipset Family PCI Express Root Port 1'
    class      = bridge
    subclass   = PCI-PCI
    cap 10[40] = PCI-Express 2 root port max data 128(128)
                 link x1(x1) speed 2.5(5.0) ASPM L1(L0s/L1)
                 slot 0 power limit 100 mW HotPlug(present) surprise
    cap 05[80] = MSI supports 1 message enabled with 1 message
    cap 0d[90] = PCI Bridge card=0x21fa17aa
    cap 01[a0] = powerspec 2  supports D0 D3  current D0
pcib2@pci0:0:28:1:    class=0x060400 card=0x21fa17aa chip=0x1e128086 rev=0xc4 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '7 Series/C210 Series Chipset Family PCI Express Root Port 2'
    class      = bridge
    subclass   = PCI-PCI
    cap 10[40] = PCI-Express 2 root port max data 128(128)
                 link x1(x1) speed 2.5(5.0) ASPM L1(L0s/L1)
                 slot 1 power limit 100 mW
    cap 05[80] = MSI supports 1 message
    cap 0d[90] = PCI Bridge card=0x21fa17aa
    cap 01[a0] = powerspec 2  supports D0 D3  current D0
pcib3@pci0:0:28:2:    class=0x060400 card=0x21fa17aa chip=0x1e148086 rev=0xc4 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '7 Series/C210 Series Chipset Family PCI Express Root Port 3'
    class      = bridge
    subclass   = PCI-PCI
    cap 10[40] = PCI-Express 2 root port max data 128(128)
                 link x0(x1) speed 0.0(5.0) ASPM L0s/L1(L0s/L1)
                 slot 2 power limit 100 mW HotPlug(empty) surprise
    cap 05[80] = MSI supports 1 message enabled with 1 message
    cap 0d[90] = PCI Bridge card=0x21fa17aa
    cap 01[a0] = powerspec 2  supports D0 D3  current D0
ehci1@pci0:0:29:0:    class=0x0c0320 card=0x21fa17aa chip=0x1e268086 rev=0x04 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '7 Series/C216 Chipset Family USB Enhanced Host Controller'
    class      = serial bus
    subclass   = USB
    cap 01[50] = powerspec 2  supports D0 D3  current D0
    cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14
    cap 13[98] = PCI Advanced Features: FLR TP
isab0@pci0:0:31:0:    class=0x060100 card=0x21fa17aa chip=0x1e558086 rev=0x04 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'QM77 Express Chipset LPC Controller'
    class      = bridge
    subclass   = PCI-ISA
    cap 09[e0] = vendor (length 12) Intel cap 1 version 0
         features: AMT, 4 PCI-e x1 slots
ahci0@pci0:0:31:2:    class=0x010601 card=0x21fa17aa chip=0x1e038086 rev=0x04 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '7 Series Chipset Family 6-port SATA Controller [AHCI mode]'
    class      = mass storage
    subclass   = SATA
    cap 05[80] = MSI supports 1 message enabled with 1 message
    cap 01[70] = powerspec 3  supports D0 D3  current D0
    cap 12[a8] = SATA Index-Data Pair
    cap 13[b0] = PCI Advanced Features: FLR TP
none1@pci0:0:31:3:    class=0x0c0500 card=0x21fa17aa chip=0x1e228086 rev=0x04 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '7 Series/C216 Chipset Family SMBus Controller'
    class      = serial bus
    subclass   = SMBus
sdhci_pci0@pci0:2:0:0:    class=0x088001 card=0x21fa17aa chip=0xe8231180 rev=0x04 hdr=0x00
    vendor     = 'Ricoh Co Ltd'
    device     = 'PCIe SDXC/MMC Host Controller'
    class      = base peripheral
    cap 05[50] = MSI supports 1 message, 64 bit enabled with 1 message
    cap 01[78] = powerspec 3  supports D0 D1 D2 D3  current D0
    cap 10[80] = PCI-Express 1 endpoint max data 128(128) RO NS
                 link x1(x1) speed 2.5(2.5) ASPM L1(L0s/L1)
    ecap 0002[100] = VC 1 max VC0
    ecap 0001[800] = AER 1 0 fatal 0 non-fatal 2 corrected
none2@pci0:3:0:0:    class=0x028000 card=0x819510ec chip=0x817610ec rev=0x01 hdr=0x00
    vendor     = 'Realtek Semiconductor Co., Ltd.'
    device     = 'RTL8188CE 802.11b/g/n WiFi Adapter'
    class      = network
    cap 01[40] = powerspec 3  supports D0 D1 D2 D3  current D0
    cap 05[50] = MSI supports 1 message, 64 bit
    cap 10[70] = PCI-Express 2 endpoint max data 128(128) RO
                 link x1(x1) speed 2.5(2.5) ASPM L1(L0s/L1)
    ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
    ecap 0002[140] = VC 1 max VC0
    ecap 0003[160] = Serial 1 019181feff4ce000
Meine loader.conf
Code:
geli_ada0p5_keyfile0_load="YES"
geli_ada0p5_keyfile0_type="ada0p5:geli_keyfile0"
geli_ada0p5_keyfile0_name="/boot/encryption.key"
aesni_load="YES"
geom_eli_load="YES"
vfs.root.mountfrom="zfs:zroot/ROOT/default"
kern.geom.label.disk_ident.enable="0"
kern.geom.label.gptid.enable="0"
zpool_cache_load="YES"
zpool_cache_type="/boot/zfs/zpool.cache"
zpool_cache_name="/boot/zfs/zpool.cache"
geom_eli_passphrase_prompt="YES"
zfs_load="YES"
autofs_load="YES"

if_iwn_load="YES"
iwn4965fw_load="YES"
iwn1000fw_load="YES"
iwn5000fw_load="YES"
iwn5150fw_load="YES"
iwn6000fw_load="YES"
iwn6000g2afw_load="YES"
iwn6000g2bfw_load="YES"
iwn6050fw_load="YES"


wlan_wep_load="YES"
wlan_ccmp_load="YES"
wlan_tkip_load="YES"
Und die /etc/rc.conf

Code:
clear_tmp_enable="YES"
hostname="x230"
keymap="german.iso.acc.kbd"
ifconfig_em0="DHCP"
sshd_enable="YES"
moused_enable="YES"
powerd_enable="YES"
# Set dumpdev to "AUTO" to enable crash dumps, "NO" to disable
dumpdev="AUTO"
zfs_enable="YES"

autofs_enable="YES"

hald_enable="YES"
dbus_enable="YES"

wlans_iwn0="wlan0"
ifconfig_wlan0="-ht WPA DHCP"
Die Karte sollte vom x230 unterstützt werden, soweit das Thinkpad Wiki Recht hat.

Hab ich vielleicht etwas vergessen?
 

Yamagi

Possessed With Psi Powers
Mitarbeiter
#2
Ich sehe in deiner Ausgabe von pciconf gar nicht. Dafür ist die Realtek-Karte bei bester Gesundheit... Ich würde daher erst einmal eine x-beliebige Linux-CD starten und schauen, ob die Intel-Karte da auftaucht. Wenn ja, ist es ein FreeBSD-Problem. Wenn nein, wird sie wohl gar nicht erkannt.