Django
Well-Known Member
Nachdem ich eine neue Nvidia GK habe , eine Zotac Nvidia Gforce GTX 1660,frieren die Desktops KDE, Gnome und XfCE ein. Nur noch Hardreset möglich.
ABER !! Der MATE-Desktop läuft ohne Probleme und stabil !
Ich stehe vor einem Rätsel
Treiber Nvidia 430.50
Kompiliert
Die dmesg:
Da kann ich nichts auffäliges finden
1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.1-RELEASE r354233 GENERIC amd64
FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1)
VT(efifb): resolution 1024x768
CPU: AMD FX-8370 Eight-Core Processor (4300.09-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x600f20 Family=0x15 Model=0x2 Stepping=0
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=Copyright (c)0x1ebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC>
Structured Extended Features=0x8<BMI1>
SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 8216547328 (7835 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 8 core(s)
random: unblocking device.
Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20181213/tbfadt-796)
ioapic0 <Version 2.1> irqs 0-23 on motherboard
ioapic1 <Version 2.1> irqs 24-55 on motherboard
Launching APs: 1 2 3 4 5 7 6
Timecounter "TSC-low" frequency 1075022697 Hz quality 1000
random: entropy device external interface
000.000019 [4335] netmap_init netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff8112e050, 0) error 19
kbd1 at kbdmux0
nexus0
efirtc0: <EFI Realtime Clock> on motherboard
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto> on motherboard
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard
acpi0: <ALASKA A M I> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 350
Event timer "HPET2" frequency 14318180 Hz quality 350
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 52 at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xfd000000-0xfdffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff irq 24 at device 0.0 on pci1
vgapci0: Boot video device
hdac0: <NVIDIA (0x1aeb) HDA Controller> mem 0xfe080000-0xfe083fff irq 25 at device 0.1 on pci1
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xd2000000-0xd203ffff,0xd2040000-0xd204ffff irq 26 at device 0.2 on pci1
xhci0: 64 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci1: <serial bus> at device 0.3 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 53 at device 9.0 on pci0
pci2: <ACPI PCI bus> on pcib2
xhci1: <NEC uPD720202 USB 3.0 controller> mem 0xfe300000-0xfe301fff irq 48 at device 0.0 on pci2
xhci1: 64 bytes context size, 64-bit DMA
xhci1: Unable to map MSI-X table
usbus1 on xhci1
usbus1: 5.0Gbps Super Speed USB v3.0
pcib3: <ACPI PCI-PCI bridge> irq 54 at device 10.0 on pci0
pci3: <ACPI PCI bus> on pcib3
xhci2: <NEC uPD720202 USB 3.0 controller> mem 0xfe200000-0xfe201fff irq 47 at device 0.0 on pci3
xhci2: 64 bytes context size, 64-bit DMA
xhci2: Unable to map MSI-X table
usbus2 on xhci2
usbus2: 5.0Gbps Super Speed USB v3.0
ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf050-0xf05f mem 0xfe40b000-0xfe40b3ff irq 19 at device 17.0 on pci0
ahci0: AHCI v1.20 with 4 6Gbps ports, Port Multiplier supported
ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI>
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe40a000-0xfe40afff irq 18 at device 18.0 on pci0
usbus3 on ohci0
usbus3: 12Mbps Full Speed USB v1.0
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe409000-0xfe4090ff irq 17 at device 18.2 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
usbus4: 480Mbps High Speed USB v2.0
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe408000-0xfe408fff irq 18 at device 19.0 on pci0
usbus5 on ohci1
usbus5: 12Mbps Full Speed USB v1.0
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe407000-0xfe4070ff irq 17 at device 19.2 on pci0
usbus6: EHCI version 1.0
usbus6 on ehci1
usbus6: 480Mbps High Speed USB v2.0
atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f irq 17 at device 20.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
hdac1: <ATI SB600 HDA Controller> mem 0xfe400000-0xfe403fff irq 16 at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci4: <ACPI PCI bus> on pcib4
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe406000-0xfe406fff irq 18 at device 20.5 on pci0
usbus7 on ohci2
usbus7: 12Mbps Full Speed USB v1.0
pcib5: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pci5: <ACPI PCI bus> on pcib5
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xfe104000-0xfe104fff,0xfe100000-0xfe103fff irq 16 at device 0.0 on pci5
re0: Using 1 MSI-X message
re0: Chip rev. 0x2c800000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 4c:cc:6a:2e:e8:e6
re0: netmap queues/slots: TX 1/256, RX 1/256
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe405000-0xfe405fff irq 18 at device 22.0 on pci0
usbus8 on ohci3
usbus8: 12Mbps Full Speed USB v1.0
ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe404000-0xfe4040ff irq 17 at device 22.2 on pci0
usbus9: EHCI version 1.0
usbus9 on ehci2
usbus9: 480Mbps High Speed USB v2.0
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
ugen2.1: <0x1912 XHCI root HUB> at usbus2
uhub0: <0x1912 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2
hdacc0: <NVIDIA (0x0099) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x0099) Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA (0x0099) (HDMI/DP 8ch)> at nid 4 on hdaa0
pcm1: <NVIDIA (0x0099) (HDMI/DP 8ch)> at nid 5 on hdaa0
pcm2: <NVIDIA (0x0099) (HDMI/DP 8ch)> at nid 6 on hdaa0
pcm3: <NVIDIA (0x0099) (HDMI/DP 8ch)> at nid 7 on hdaa0
hdacc1: <Realtek ALC887 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc1
pcm4: <Realtek ALC887 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1
pcm5: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa1
ugen6.1: <ATI EHCI root HUB> at usbus6
ugen5.1: <ATI OHCI root HUB> at usbus5
ugen8.1: <ATI OHCI root HUB> at usbus8
ugen0.1: <0x10de XHCI root HUB> at usbus0
ugen1.1: <0x1912 XHCI root HUB> at usbus1
ugen9.1: <ATI EHCI root HUB> at usbus9
ugen3.1: <ATI OHCI root HUB> at usbus3
ugen4.1: <ATI EHCI root HUB> at usbus4
uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
uhub4: <0x1912 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
uhub3: ugen7.1: <ATI OHCI root HUB> at usbus7
<0x10de XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
uhub7: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus8
uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7
uhub8: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub9: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus9
uhub0: 4 ports with 4 removable, self powered
uhub6: 2 ports with 2 removable, self powered
uhub2: 5 ports with 5 removable, self powered
uhub7: 4 ports with 4 removable, self powered
uhub5: 5 ports with 5 removable, self powered
uhub4: 4 ports with 4 removable, self powered
uhub3: 6 ports with 6 removable, self powered
uhub9: 4 ports with 4 removable, self powered
uhub1: 5 ports with 5 removable, self powered
uhub8: 5 ports with 5 removable, self powered
ugen6.2: <vendor 0x05e3 USB2.0 Hub> at usbus6
uhub10 on uhub1
uhub10: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/7.02, addr 2> on usbus6
uhub10: 4 ports with 4 removable, self powered
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ADATA SP900 5.0.7a> ATA8-ACS SATA 3.x device
ada0: Serial Number 7D3320014507
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 244198MB (500118192 512 byte sectors)
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <ST2000DL003-9VT166 CC4A> ATA8-ACS SATA 3.x device
ada1: Serial Number 5YD6MW3S
ada1: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 1907729MB (3907029168 512 byte sectors)
ada1: quirks=0x1<4K>
ada2 at ahcich3 bus 0 scbus3 target 0 lun 0
ada2: <WDC WD5000AVVS-63ZWB0 01.01B01> ATA8-ACS SATA 2.x device
ada2: Serial Number WD-WCASU5737242
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 476940MB (976773168 512 byte sectors)
Trying to mount root from zfs:zroot/ROOT/default []...
ugen5.2: <Logitech USB Receiver> at usbus5
GEOM_ELI: Device ada2p4.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI: Crypto: hardware
ugen5.3: <Logitech USB Receiver> at usbus5
ukbd0 on uhub5
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/24.01, addr 3> on usbus5
kbd2 at ukbd0
GEOM_ELI: Device ada2p3.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI: Crypto: hardware
nvidia0: <Unknown> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 430.50 Thu Sep 5 22:02:59 CDT 2019
lo0: link state changed to UP
re0: link state changed to DOWN
re0: link state changed to UP
intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
ums0 on uhub5
ums0: <Logitech USB Receiver, class 0/0, rev 1.10/46.00, addr 2> on usbus5
ums0: 8 buttons and [XYZT] coordinates ID=0
uhid0 on uhub5
uhid0: <Logitech USB Receiver, class 0/0, rev 1.10/46.00, addr 2> on usbus5
ums1 on uhub5
ums1: <Logitech USB Receiver, class 0/0, rev 2.00/24.01, addr 3> on usbus5
ums1: 16 buttons and [XYZT] coordinates ID=2
uhid1 on uhub5
uhid1: <Logitech USB Receiver, class 0/0, rev 2.00/24.01, addr 3> on usbus5
tun0: link state changed to UP
ABER !! Der MATE-Desktop läuft ohne Probleme und stabil !
Ich stehe vor einem Rätsel
Treiber Nvidia 430.50
Kompiliert
Die dmesg:
Da kann ich nichts auffäliges finden
1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.1-RELEASE r354233 GENERIC amd64
FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1)
VT(efifb): resolution 1024x768
CPU: AMD FX-8370 Eight-Core Processor (4300.09-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x600f20 Family=0x15 Model=0x2 Stepping=0
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=Copyright (c)0x1ebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC>
Structured Extended Features=0x8<BMI1>
SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 8216547328 (7835 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 8 core(s)
random: unblocking device.
Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20181213/tbfadt-796)
ioapic0 <Version 2.1> irqs 0-23 on motherboard
ioapic1 <Version 2.1> irqs 24-55 on motherboard
Launching APs: 1 2 3 4 5 7 6
Timecounter "TSC-low" frequency 1075022697 Hz quality 1000
random: entropy device external interface
000.000019 [4335] netmap_init netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff8112e050, 0) error 19
kbd1 at kbdmux0
nexus0
efirtc0: <EFI Realtime Clock> on motherboard
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto> on motherboard
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard
acpi0: <ALASKA A M I> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 350
Event timer "HPET2" frequency 14318180 Hz quality 350
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 52 at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xfd000000-0xfdffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff irq 24 at device 0.0 on pci1
vgapci0: Boot video device
hdac0: <NVIDIA (0x1aeb) HDA Controller> mem 0xfe080000-0xfe083fff irq 25 at device 0.1 on pci1
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xd2000000-0xd203ffff,0xd2040000-0xd204ffff irq 26 at device 0.2 on pci1
xhci0: 64 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci1: <serial bus> at device 0.3 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 53 at device 9.0 on pci0
pci2: <ACPI PCI bus> on pcib2
xhci1: <NEC uPD720202 USB 3.0 controller> mem 0xfe300000-0xfe301fff irq 48 at device 0.0 on pci2
xhci1: 64 bytes context size, 64-bit DMA
xhci1: Unable to map MSI-X table
usbus1 on xhci1
usbus1: 5.0Gbps Super Speed USB v3.0
pcib3: <ACPI PCI-PCI bridge> irq 54 at device 10.0 on pci0
pci3: <ACPI PCI bus> on pcib3
xhci2: <NEC uPD720202 USB 3.0 controller> mem 0xfe200000-0xfe201fff irq 47 at device 0.0 on pci3
xhci2: 64 bytes context size, 64-bit DMA
xhci2: Unable to map MSI-X table
usbus2 on xhci2
usbus2: 5.0Gbps Super Speed USB v3.0
ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf050-0xf05f mem 0xfe40b000-0xfe40b3ff irq 19 at device 17.0 on pci0
ahci0: AHCI v1.20 with 4 6Gbps ports, Port Multiplier supported
ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI>
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe40a000-0xfe40afff irq 18 at device 18.0 on pci0
usbus3 on ohci0
usbus3: 12Mbps Full Speed USB v1.0
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe409000-0xfe4090ff irq 17 at device 18.2 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
usbus4: 480Mbps High Speed USB v2.0
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe408000-0xfe408fff irq 18 at device 19.0 on pci0
usbus5 on ohci1
usbus5: 12Mbps Full Speed USB v1.0
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe407000-0xfe4070ff irq 17 at device 19.2 on pci0
usbus6: EHCI version 1.0
usbus6 on ehci1
usbus6: 480Mbps High Speed USB v2.0
atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f irq 17 at device 20.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
hdac1: <ATI SB600 HDA Controller> mem 0xfe400000-0xfe403fff irq 16 at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci4: <ACPI PCI bus> on pcib4
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe406000-0xfe406fff irq 18 at device 20.5 on pci0
usbus7 on ohci2
usbus7: 12Mbps Full Speed USB v1.0
pcib5: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pci5: <ACPI PCI bus> on pcib5
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xfe104000-0xfe104fff,0xfe100000-0xfe103fff irq 16 at device 0.0 on pci5
re0: Using 1 MSI-X message
re0: Chip rev. 0x2c800000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 4c:cc:6a:2e:e8:e6
re0: netmap queues/slots: TX 1/256, RX 1/256
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe405000-0xfe405fff irq 18 at device 22.0 on pci0
usbus8 on ohci3
usbus8: 12Mbps Full Speed USB v1.0
ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe404000-0xfe4040ff irq 17 at device 22.2 on pci0
usbus9: EHCI version 1.0
usbus9 on ehci2
usbus9: 480Mbps High Speed USB v2.0
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
ugen2.1: <0x1912 XHCI root HUB> at usbus2
uhub0: <0x1912 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2
hdacc0: <NVIDIA (0x0099) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x0099) Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA (0x0099) (HDMI/DP 8ch)> at nid 4 on hdaa0
pcm1: <NVIDIA (0x0099) (HDMI/DP 8ch)> at nid 5 on hdaa0
pcm2: <NVIDIA (0x0099) (HDMI/DP 8ch)> at nid 6 on hdaa0
pcm3: <NVIDIA (0x0099) (HDMI/DP 8ch)> at nid 7 on hdaa0
hdacc1: <Realtek ALC887 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc1
pcm4: <Realtek ALC887 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1
pcm5: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa1
ugen6.1: <ATI EHCI root HUB> at usbus6
ugen5.1: <ATI OHCI root HUB> at usbus5
ugen8.1: <ATI OHCI root HUB> at usbus8
ugen0.1: <0x10de XHCI root HUB> at usbus0
ugen1.1: <0x1912 XHCI root HUB> at usbus1
ugen9.1: <ATI EHCI root HUB> at usbus9
ugen3.1: <ATI OHCI root HUB> at usbus3
ugen4.1: <ATI EHCI root HUB> at usbus4
uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
uhub4: <0x1912 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
uhub3: ugen7.1: <ATI OHCI root HUB> at usbus7
<0x10de XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
uhub7: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus8
uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7
uhub8: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub9: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus9
uhub0: 4 ports with 4 removable, self powered
uhub6: 2 ports with 2 removable, self powered
uhub2: 5 ports with 5 removable, self powered
uhub7: 4 ports with 4 removable, self powered
uhub5: 5 ports with 5 removable, self powered
uhub4: 4 ports with 4 removable, self powered
uhub3: 6 ports with 6 removable, self powered
uhub9: 4 ports with 4 removable, self powered
uhub1: 5 ports with 5 removable, self powered
uhub8: 5 ports with 5 removable, self powered
ugen6.2: <vendor 0x05e3 USB2.0 Hub> at usbus6
uhub10 on uhub1
uhub10: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/7.02, addr 2> on usbus6
uhub10: 4 ports with 4 removable, self powered
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ADATA SP900 5.0.7a> ATA8-ACS SATA 3.x device
ada0: Serial Number 7D3320014507
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 244198MB (500118192 512 byte sectors)
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <ST2000DL003-9VT166 CC4A> ATA8-ACS SATA 3.x device
ada1: Serial Number 5YD6MW3S
ada1: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 1907729MB (3907029168 512 byte sectors)
ada1: quirks=0x1<4K>
ada2 at ahcich3 bus 0 scbus3 target 0 lun 0
ada2: <WDC WD5000AVVS-63ZWB0 01.01B01> ATA8-ACS SATA 2.x device
ada2: Serial Number WD-WCASU5737242
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 476940MB (976773168 512 byte sectors)
Trying to mount root from zfs:zroot/ROOT/default []...
ugen5.2: <Logitech USB Receiver> at usbus5
GEOM_ELI: Device ada2p4.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI: Crypto: hardware
ugen5.3: <Logitech USB Receiver> at usbus5
ukbd0 on uhub5
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/24.01, addr 3> on usbus5
kbd2 at ukbd0
GEOM_ELI: Device ada2p3.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI: Crypto: hardware
nvidia0: <Unknown> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 430.50 Thu Sep 5 22:02:59 CDT 2019
lo0: link state changed to UP
re0: link state changed to DOWN
re0: link state changed to UP
intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
ums0 on uhub5
ums0: <Logitech USB Receiver, class 0/0, rev 1.10/46.00, addr 2> on usbus5
ums0: 8 buttons and [XYZT] coordinates ID=0
uhid0 on uhub5
uhid0: <Logitech USB Receiver, class 0/0, rev 1.10/46.00, addr 2> on usbus5
ums1 on uhub5
ums1: <Logitech USB Receiver, class 0/0, rev 2.00/24.01, addr 3> on usbus5
ums1: 16 buttons and [XYZT] coordinates ID=2
uhid1 on uhub5
uhid1: <Logitech USB Receiver, class 0/0, rev 2.00/24.01, addr 3> on usbus5
tun0: link state changed to UP