---<<BOOT>>---
Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.1-RELEASE-p6 stable/24.7-n267981-8375762712f SMP amd64
FreeBSD clang version 18.1.5 (
https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(R) CPU @ 2.50GHz (2500.18-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,>
Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 17179869184 (16384 MB)
avail memory = 16617021440 (15847 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23
Launching APs: 3 1 2
random: entropy device external interface
wlan: mac acl policy registered
kbd0 at kbdmux0
WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0.
vtvga0: <VT VGA driver>
smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de
smbios0: Version: 2.7, BCD Revision: 2.7
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
acpi0: <ALASKA A M I>
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
apei0: <ACPI Platform Error Interface> on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <processor> at device 0.0 (no driver attached)
igb0: <Intel(R) I347-AT4 DH89XXCC> port 0xe180-0xe1ff mem 0xfe660000-0xfe67ffff,0xfe6ac000-0xfe6affff irq 17 at1
igb0: EEPROM V3.0-1 eTrack 0x000153c9
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 4 RX queues 4 TX queues
igb0: Using MSI-X interrupts with 5 vectors
igb0: Ethernet address: 00:0e:b6:b2:2a:82
igb0: netmap queues/slots: TX 4/1024, RX 4/1024
igb1: <Intel(R) I347-AT4 DH89XXCC> port 0xe100-0xe17f mem 0xfe640000-0xfe65ffff,0xfe6a8000-0xfe6abfff irq 18 at1
igb1: EEPROM V3.0-1 eTrack 0x000153c9
igb1: Using 1024 TX descriptors and 1024 RX descriptors
igb1: Using 4 RX queues 4 TX queues
igb1: Using MSI-X interrupts with 5 vectors
igb1: Ethernet address: 00:0e:b6:b2:2a:83
igb1: netmap queues/slots: TX 4/1024, RX 4/1024
igb2: <Intel(R) I347-AT4 DH89XXCC> port 0xe080-0xe0ff mem 0xfe620000-0xfe63ffff,0xfe6a4000-0xfe6a7fff irq 19 at1
igb2: EEPROM V3.0-1 eTrack 0x000153c9
igb2: Using 1024 TX descriptors and 1024 RX descriptors
igb2: Using 4 RX queues 4 TX queues
igb2: Using MSI-X interrupts with 5 vectors
igb2: Ethernet address: 00:0e:b6:b2:2a:84
igb2: netmap queues/slots: TX 4/1024, RX 4/1024
igb3: <Intel(R) I347-AT4 DH89XXCC> port 0xe000-0xe07f mem 0xfe600000-0xfe61ffff,0xfe6a0000-0xfe6a3fff irq 17 at1
igb3: EEPROM V3.0-1 eTrack 0x000153c9
igb3: Using 1024 TX descriptors and 1024 RX descriptors
igb3: Using 4 RX queues 4 TX queues
igb3: Using MSI-X interrupts with 5 vectors
igb3: Ethernet address: 00:0e:b6:b2:2a:85
igb3: netmap queues/slots: TX 4/1024, RX 4/1024
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
igb4: <Intel(R) I210 (Copper)> port 0xd000-0xd01f mem 0xfe500000-0xfe57ffff,0xfe580000-0xfe583fff irq 16 at dev2
igb4: PHY reset is blocked due to SOL/IDER session.
igb4: EEPROM V3.16-0 eTrack 0x800004d7
igb4: Using 1024 TX descriptors and 1024 RX descriptors
igb4: Using 4 RX queues 4 TX queues
igb4: Using MSI-X interrupts with 5 vectors
igb4: Ethernet address: 00:0e:b6:5c:42:30
igb4: link state changed to UP
igb4: netmap queues/slots: TX 4/1024, RX 4/1024
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
igb5: <Intel(R) I210 (Copper)> port 0xc000-0xc01f mem 0xfe400000-0xfe47ffff,0xfe480000-0xfe483fff irq 17 at dev3
igb5: EEPROM V3.16-0 eTrack 0x800004d9
igb5: Using 1024 TX descriptors and 1024 RX descriptors
igb5: Using 4 RX queues 4 TX queues
igb5: Using MSI-X interrupts with 5 vectors
igb5: Ethernet address: 00:0e:b6:5c:42:31
igb5: netmap queues/slots: TX 4/1024, RX 4/1024
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe706000-0xfe7063ff irq 23 at device 29.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel DH89xxCC AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020
ahci0: AHCI v1.30 with 4 3Gbps ports, Port Multiplier supported
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_button0: <Power Button> on acpi0
uart0: <Non-standard ns8250 class UART with FIFOs> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ns8250: UART FCR is broken
uart0: console (115200,n,8,1)
orm0: <ISA Option ROM> at iomem 0xc0000-0xc0fff pnpid ORM0000 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d9f00001900
device_attach: est0 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d9f00001900
device_attach: est1 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d9f00001900
device_attach: est2 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1d9f00001900
device_attach: est3 attach returned 6
Timecounter "TSC-low" frequency 1250000172 Hz quality 1000
Timecounters tick every 1.000 msec
ugen0.1: <Intel EHCI root HUB> at usbus0
uhub0 on usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Trying to mount root from zfs:zroot/ROOT/default []...
ada0 at ahcich4 bus 0 scbus0 target 0 lun 0
ada0: <INTEL SSDSC2BB160G4 D2010370> ACS-2 ATA SATA 3.x device
ada0: Serial Number BTWL4343044V160MGN
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 152627MB (312581808 512 byte sectors)
ada1 at ahcich5 bus 0 scbus1 target 0 lun 0
ada1: <HGST HTE725032A7E630 GHBOA510> ATA8-ACS SATA 3.x device
ada1: Serial Number TF640LYR3WA1TL
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 305245MB (625142448 512 byte sectors)
ses0 at ahciem0 bus 0 scbus2 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ses0: ada0,pass0 in 'Slot 04', SATA Slot: scbus0 target 0
ses0: ada1,pass1 in 'Slot 05', SATA Slot: scbus1 target 0
uhub0: 2 ports with 2 removable, self powered
Root mount waiting for: usbus0
ugen0.2: <vendor 0x8087 product 0x0020> at usbus0
uhub1 on uhub0
uhub1: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus0
Root mount waiting for: usbus0
uhub1: 6 ports with 6 removable, self powered
ugen0.3: <American Megatrends Inc. Virtual Hub> at usbus0
uhub2 on uhub1
uhub2: <American Megatrends Inc. Virtual Hub, class 9/0, rev 2.00/1.00, addr 3> on usbus0
Root mount waiting for: usbus0
uhub2: 5 ports with 5 removable, self powered
ichsmb0: <Intel DH89xxCC SMBus controller> port 0xf000-0xf01f mem 0xfe704000-0xfe7040ff irq 18 at device 31.3 o0
smbus0: <System Management Bus> on ichsmb0
lo0: link state changed to UP
pflog0: permanently promiscuous mode enabled
igb4: link state changed to DOWN
igb4: link state changed to UP
