rMarkus
Chuck The Plant
NRWDaniel Seuffert schrieb:@ markus.r: Wo stehen denn die Maschinen?
Folge dem Video um zu sehen, wie unsere Website als Web-App auf dem Startbildschirm installiert werden kann.
Anmerkung: Diese Funktion ist in einigen Browsern möglicherweise nicht verfügbar.
NRWDaniel Seuffert schrieb:@ markus.r: Wo stehen denn die Maschinen?
Daniel Seuffert schrieb:markus.r: kannst du uns mal etwas genauere specs zu den Maschinen geben, von mir aus dmesg als link oder irgendwas in der Art?
pcserver# dmesg
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RELEASE #1: Fri Dec 31 04:42:46 UTC 1999
[email]root@pcserver.loca[/email]l:/usr/src/sys/i386/compile/GENERIC686SMP
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium II/Pentium II Xeon/Celeron (299.17-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 134217728 (128 MB)
avail memory = 121696256 (116 MB)
MPTable: <IBM 8640 PCI >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 1
cpu1 (AP): APIC ID: 0
ioapic0: Assuming intbase of 0
ioapic0 <Version 1.1> irqs 0-23 on motherboard
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
cpu1 on motherboard
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: <display, VGA> at device 7.0 (no driver attached)
pcib1: <MPTable PCI-PCI bridge> at device 11.0 on pci0
pci1: <PCI bus> on pcib1
ips0: <IBM ServeRAID Adapter> port 0x5100-0x51ff mem 0x50000000-0x50001fff irq 18 at device 3.0 on pci1
ahc0: <Adaptec aic7880 Ultra SCSI adapter> port 0x5000-0x50ff mem 0x50002000-0x50002fff irq 19 at device 4.0 on pci1
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
pcn0: <AMD PCnet/PCI 10/100BaseTX> port 0x5200-0x521f mem 0x50003000-0x5000301f irq 16 at device 5.0 on pci1
miibus0: <MII bus> on pcn0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcn0: Ethernet address: 00:60:94:57:13:77
pcn0: if_start running deferred for Giant
sym0: <875> port 0x6000-0x60ff mem 0x50100000-0x50100fff,0x50101000-0x501010ff irq 16 at device 13.0 on pci0
sym0: Symbios NVRAM, ID 7, Fast-20, SE, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x6100-0x617f mem 0x50101100-0x5010117f irq 17 at device 15.0 on pci0
miibus1: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus1
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:01:02:b7:27:7d
isab0: <PCI-ISA bridge> at device 19.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 WDMA2 controller> port 0x61a0-0x61af,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 19.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
uhci0: <Intel 82371SB (PIIX3) USB controller> port 0x6180-0x619f irq 19 at device 19.2 on pci0
usb0: <Intel 82371SB (PIIX3) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
orm0: <ISA Option ROMs> at iomem 0xc8000-0xc87ff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0401> can't assign resources (port)
Timecounters tick every 10.000 msec
Waiting 15 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
ips0: reinitializing adapter, this could take several minutes.
ips0: ERROR: ffdc reset command failed!
ips0: adapter type: ServeRAID onboard (copperhead)
ips0: logical drives: 1
ips0: Logical Drive 0: RAID1 sectors: 8812544, state OK
ipsd0: <Logical Drive> on ips0
ipsd0: Logical Drive (4303MB)
sa0 at sym0 bus 0 target 2 lun 0
sa0: <HP HP35480A T503> Removable Sequential Access SCSI-2 device
sa0: 5.000MB/s transfers (5.000MHz, offset 8)
SMP: AP CPU #1 Launched!
cd0 at sym0 bus 0 target 6 lun 0
cd0: <IBM CDRM00203\\000\\000\\000\\000\\000!K 8B08> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/ipsd0s1a
soul_rebel schrieb:hab ich leider keine zeit für, sorry...
war als anregung gedacht, ich fahr in 2 wochen nach nicaragua und weiß nciht mal ob ich da computer zugang haben werde (für 5 monate)....
ich dachte nur da gregor anscheint ja viel zeit rein investiert neue infos für die seite zu finden, könnte er sie ja auch ins wiki eintragen
Wir verwenden essentielle Cookies, damit diese Website funktioniert, und optionale Cookies, um den Komfort bei der Nutzung zu verbessern.
Siehe weitere Informationen und konfiguriere deine Einstellungen