Nach freebsd-update Grafikprobleme

T

Tatzahn

Well-Known Member
Hei,
ich habe kürzlich auf ein lenovo thinkpad ein freebsd-update ausgeführt. Seitdem habe ich beim booten mittendrin einen schwarzen Bildschirm mit weißen Artefakten am oberen Bildschirmrand. Ich kann mich trotzdem blind einloggen und startx ausführen. Ab da hab ich nur noch gelegentlich leichte Fehldarstellungen bei ff (schwarze Flächen flimmern auf).
Was ich bisher probiert habe:
#kern=vty=sc
oder
#kern=vty=vt

in /boot/loader.conf eingetragen.

Mein dmesg sieht so aus:

dmesg
---<<BOOT>>---
Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.2-RELEASE releng/14.2-n269506-c8918d6c7412 GENERIC amd64
FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67)
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz (2492.05-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x1fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
XSAVE Features=0x1<XSAVEOPT>
VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 6442450944 (6144 MB)
avail memory = 6074441728 (5793 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <LENOVO TP-83 >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23
Launching APs: 1 3 2
random: entropy device external interface
kbd1 at kbdmux0
vtvga0: <VT VGA driver>
smbios0: <System Management BIOS> at iomem 0xf03d0-0xf03ee
smbios0: Version: 2.6, BCD Revision: 2.6
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
acpi0: <LENOVO TP-83>
acpi_ec0: <Embedded Controller: GPE 0x11, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0xf0000000-0xf03fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
pci0: <simple comms> at device 22.0 (no driver attached)
uart2: <Intel AMT - KT Controller> port 0x50b0-0x50b7 mem 0xf252c000-0xf252cfff irq 19 at device 22.3 on pci0
uart2: Using 1 MSI message
em0: <Intel(R) 82579LM> port 0x5080-0x509f mem 0xf2500000-0xf251ffff,0xf252b000-0xf252bfff irq 20 at device 25.0 on pci0
em0: EEPROM V0.13-3
em0: Using 1024 TX descriptors and 1024 RX descriptors
em0: Using an MSI interrupt
em0: Ethernet address: 00:21:cc:6b:12:37
em0: netmap queues/slots: TX 1/1024, RX 1/1024
ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xf252a000-0xf252a3ff irq 16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
hdac0: <Intel Cougar Point HDA Controller> mem 0xf2520000-0xf2523fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci1: <ACPI PCI bus> on pcib2
iwn0: <Intel Centrino Advanced-N 6205> mem 0xf2400000-0xf2401fff irq 17 at device 0.0 on pci1
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci2: <ACPI PCI bus> on pcib4
sdhci_pci0: <RICOH R5CE823 SD> mem 0xf1400000-0xf14000ff irq 16 at device 0.0 on pci2
sdhci_pci0: 1 slot(s) allocated
ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xf2529000-0xf25293ff irq 23 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci1
usbus1: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Cougar Point AHCI SATA controller> port 0x50a8-0x50af,0x50bc-0x50bf,0x50a0-0x50a7,0x50b8-0x50bb,0x5060-0x507f mem 0xf2528000-0xf25287ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 15.0.
psm0: model Synaptics Touchpad, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounter "TSC-low" frequency 1245954260 Hz quality 1000
Timecounters tick every 1.000 msec
ugen0.1: <Intel EHCI root HUB> at usbus0
ugen1.1: <Intel EHCI root HUB> at usbus1
uhub0 on usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
uhub1 on usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
hdacc0: <Conexant CX20590 HDA CODEC> at cad 0 on hdac0
hdaa0: <Conexant CX20590 Audio Function Group> at nid 1 on hdacc0
pcm0: <Conexant CX20590 (Analog 2.0+HP/2.0)> at nid 31,25 and 35,27 on hdaa0
hdacc1: <Intel Cougar Point HDA CODEC> at cad 3 on hdac0
hdaa1: <Intel Cougar Point Audio Function Group> at nid 1 on hdacc1
pcm1: <Intel Cougar Point (HDMI/DP 8ch)> at nid 5 on hdaa1
pcm2: <Intel Cougar Point (HDMI/DP 8ch)> at nid 6 on hdaa1
pcm3: <Intel Cougar Point (HDMI/DP 8ch)> at nid 7 on hdaa1
Trying to mount root from zfs:zroot/ROOT/default []...
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <Samsung SSD 840 EVO 250GB EXT0BB0Q> ACS-2 ATA SATA 3.x device
ada0: Serial Number S1DBNSADA95810B
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 238475MB (488397168 512 byte sectors)
ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN>
ses0 at ahciem0 bus 0 scbus4 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0
ses0: cd0,pass1 in 'Slot 01', SATA Slot: scbus1 target 0
cd0 at ahcich1 bus 0 scbus1 target 0 lun 0
cd0: <MATSHITA DVD-RAM UJ8A0A SB02> Removable CD-ROM SCSI device
cd0: Serial Number YK95 330845
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: 0MB (1 2048 byte sectors)
(cd0:ahcich1:0:0:0): READ(10). CDB: 28 00 00 00 00 00 00 00 01 00
(cd0:ahcich1:0:0:0): CAM status: SCSI Status Error
(cd0:ahcich1:0:0:0): SCSI status: Check Condition
(cd0:ahcich1:0:0:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range)
(cd0:ahcich1:0:0:0): Command Specific Info: 0xa90000
(cd0:ahcich1:0:0:0): Error 22, Unretryable error
(cd0:ahcich1:0:0:0): cddone: got error 0x16 back
(cd0:ahcich1:0:0:0): READ(10). CDB: 28 00 00 00 00 00 00 00 01 00
(cd0:ahcich1:0:0:0): CAM status: SCSI Status Error
(cd0:ahcich1:0:0:0): SCSI status: Check Condition
(cd0:ahcich1:0:0:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range)
(cd0:ahcich1:0:0:0): Command Specific Info: 0xa90000
(cd0:ahcich1:0:0:0): Error 22, Unretryable error
(cd0:ahcich1:0:0:0): cddone: got error 0x16 back
(cd0:ahcich1:0:0:0): READ(10). CDB: 28 00 00 00 00 00 00 00 01 00
(cd0:ahcich1:0:0:0): CAM status: SCSI Status Error
(cd0:ahcich1:0:0:0): SCSI status: Check Condition
(cd0:ahcich1:0:0:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range)
(cd0:ahcich1:0:0:0): Command Specific Info: 0xa90000
(cd0:ahcich1:0:0:0): Error 22, Unretryable error
(cd0:ahcich1:0:0:0): cddone: got error 0x16 back
(cd0:ahcich1:0:0:0): READ(10). CDB: 28 00 00 00 00 00 00 00 01 00
(cd0:ahcich1:0:0:0): CAM status: SCSI Status Error
(cd0:ahcich1:0:0:0): SCSI status: Check Condition
(cd0:ahcich1:0:0:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range)
(cd0:ahcich1:0:0:0): Command Specific Info: 0xa90000
(cd0:ahcich1:0:0:0): Error 22, Unretryable error
(cd0:ahcich1:0:0:0): cddone: got error 0x16 back
(cd0:ahcich1:0:0:0): READ(10). CDB: 28 00 00 00 00 00 00 00 01 00
(cd0:ahcich1:0:0:0): CAM status: SCSI Status Error
(cd0:ahcich1:0:0:0): SCSI status: Check Condition
(cd0:ahcich1:0:0:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range)
(cd0:ahcich1:0:0:0): Command Specific Info: 0xa90000
(cd0:ahcich1:0:0:0): Error 22, Unretryable error
(cd0:ahcich1:0:0:0): cddone: got error 0x16 back
(cd0:ahcich1:0:0:0): READ(10). CDB: 28 00 00 00 00 00 00 00 01 00
(cd0:ahcich1:0:0:0): CAM status: SCSI Status Error
(cd0:ahcich1:0:0:0): SCSI status: Check Condition
(cd0:ahcich1:0:0:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range)
(cd0:ahcich1:0:0:0): Command Specific Info: 0xa90000
(cd0:ahcich1:0:0:0): Error 22, Unretryable error
(cd0:ahcich1:0:0:0): cddone: got error 0x16 back
(cd0:ahcich1:0:0:0): READ(10). CDB: 28 00 00 00 00 00 00 00 01 00
(cd0:ahcich1:0:0:0): CAM status: SCSI Status Error
(cd0:ahcich1:0:0:0): SCSI status: Check Condition
(cd0:ahcich1:0:0:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range)
(cd0:ahcich1:0:0:0): Command Specific Info: 0xa90000
(cd0:ahcich1:0:0:0): Error 22, Unretryable error
(cd0:ahcich1:0:0:0): cddone: got error 0x16 back
(cd0:ahcich1:0:0:0): READ(10). CDB: 28 00 00 00 00 00 00 00 01 00
(cd0:ahcich1:0:0:0): CAM status: SCSI Status Error
(cd0:ahcich1:0:0:0): SCSI status: Check Condition
(cd0:ahcich1:0:0:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range)
(cd0:ahcich1:0:0:0): Command Specific Info: 0xa90000
(cd0:ahcich1:0:0:0): Error 22, Unretryable error
(cd0:ahcich1:0:0:0): cddone: got error 0x16 back
(cd0:ahcich1:0:0:0): READ(10). CDB: 28 00 00 00 00 00 00 00 01 00
(cd0:ahcich1:0:0:0): CAM status: SCSI Status Error
(cd0:ahcich1:0:0:0): SCSI status: Check Condition
(cd0:ahcich1:0:0:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range)
(cd0:ahcich1:0:0:0): Command Specific Info: 0xa90000
(cd0:ahcich1:0:0:0): Error 22, Unretryable error
(cd0:ahcich1:0:0:0): cddone: got error 0x16 back
(cd0:ahcich1:0:0:0): READ(10). CDB: 28 00 00 00 00 00 00 00 01 00
(cd0:ahcich1:0:0:0): CAM status: SCSI Status Error
(cd0:ahcich1:0:0:0): SCSI status: Check Condition
(cd0:ahcich1:0:0:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range)
(cd0:ahcich1:0:0:0): Command Specific Info: 0xa90000
(cd0:ahcich1:0:0:0): Error 22, Unretryable error
(cd0:ahcich1:0:0:0): cddone: got error 0x16 back
GEOM_ELI: Device ada0p3.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI: Crypto: accelerated software
Root mount waiting for: usbus0 usbus1
uhub1: 3 ports with 3 removable, self powered
uhub0: 3 ports with 3 removable, self powered
ugen1.2: <vendor 0x8087 product 0x0024> at usbus1
uhub2 on uhub1
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
ugen0.2: <vendor 0x8087 product 0x0024> at usbus0
uhub3 on uhub0
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
Root mount waiting for: usbus0 usbus1
uhub3: 6 ports with 6 removable, self powered
uhub2: 8 ports with 8 removable, self powered
ugen0.3: <Chicony Electronics Co., Ltd. Integrated Camera> at usbus0
ugen1.3: <Lenovo F5521gw> at usbus1
GEOM_ELI: Device ada0p2.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI: Crypto: accelerated software
[drm] Got Intel graphics stolen memory base 0xdba00000, size 0x4000000
drmn0: <drmn> on vgapci0
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
lkpi_iic0: <LinuxKPI I2C> on drmn0
iicbus0: <Philips I2C bus> on lkpi_iic0
iic0: <I2C generic I/O> on iicbus0
lkpi_iic1: <LinuxKPI I2C> on drmn0
iicbus1: <Philips I2C bus> on lkpi_iic1
iic1: <I2C generic I/O> on iicbus1
lkpi_iic2: <LinuxKPI I2C> on drmn0
iicbus2: <Philips I2C bus> on lkpi_iic2
iic2: <I2C generic I/O> on iicbus2
lkpi_iic3: <LinuxKPI I2C> on drmn0
iicbus3: <Philips I2C bus> on lkpi_iic3
iic3: <I2C generic I/O> on iicbus3
lkpi_iic4: <LinuxKPI I2C> on drmn0
iicbus4: <Philips I2C bus> on lkpi_iic4
iic4: <I2C generic I/O> on iicbus4
lkpi_iic5: <LinuxKPI I2C> on drmn0
iicbus5: <Philips I2C bus> on lkpi_iic5
iic5: <I2C generic I/O> on iicbus5
lkpi_iic6: <LinuxKPI I2C> on drmn0
iicbus6: <Philips I2C bus> on lkpi_iic6
iic6: <I2C generic I/O> on iicbus6
iic6: detached
iicbus6: detached
lkpi_iic6: detached
sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)!
lkpi_iic6: <LinuxKPI I2C> on drm4
iicbus6: <Philips I2C bus> on lkpi_iic6
iic6: <I2C generic I/O> on iicbus6
lkpi_iic7: <LinuxKPI I2C> on drm7
iicbus7: <Philips I2C bus> on lkpi_iic7
iic7: <I2C generic I/O> on iicbus7
lkpi_iic8: <LinuxKPI I2C> on drm8
iicbus8: <Philips I2C bus> on lkpi_iic8
iic8: <I2C generic I/O> on iicbus8
[drm] Initialized i915 1.6.0 20201103 for drmn0 on minor 0
VT: Driver priority 0 too low. Current 100
fbd0: not attached to vt(4) console; another device has precedence (err=17)
ichsmb0: <Intel Cougar Point SMBus controller> port 0xefa0-0xefbf mem 0xf2524000-0xf25240ff irq 18 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: Embedded MOF found
ACPI: \134_SB.WMI1.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361)
acpi_wmi1: <ACPI-WMI mapping> on acpi0
acpi_wmi1: Embedded MOF found
ACPI: \134_SB.WMI2.WQBB: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361)
wlan0: Ethernet address: 08:11:96:26:40:6c
lo0: link state changed to UP
iwn0: iwn_read_firmware: ucode rev=0x12a80601
wlan0: link state changed to UP
umodem0 on uhub2
umodem0: <Lenovo F5521gw, class 2/0, rev 2.00/0.00, addr 3> on usbus1
umodem0: data interface 2, has CM over data, has break
umodem1 on uhub2
umodem1: <Lenovo F5521gw, class 2/0, rev 2.00/0.00, addr 3> on usbus1
umodem1: data interface 4, has CM over data, has break
umodem2 on uhub2
umodem2: <Lenovo F5521gw, class 2/0, rev 2.00/0.00, addr 3> on usbus1
umodem2: data interface 10, has CM over data, has break
cdce0 on uhub2
cdce0: <Lenovo F5521gw, class 2/0, rev 2.00/0.00, addr 3> on usbus1
ue0: <USB Ethernet> on cdce0
ue0: Ethernet address: 02:80:37:ec:02:00
Security policy loaded: MAC/ntpd (mac_ntpd)
drmn0: [drm] GPU HANG: ecode 6:1:001a7544, in Renderer [101097]
drmn0: [drm] Resetting chip for stopped heartbeat on rcs0
drmn0: [drm] Renderer[101097] context reset due to GPU hang


Hat jemand schon einen ähnlichen Fehler gehabt? Wie kann das gelöst werden?
 
Benutzt Du den Grafiktreiber aus den Packages?
Der ist nämlich nicht auf dem Stand von FreeBSD 14.2
Den aus den Ports zu bauen sollte das Problem fixen.
Wenn 14.1 out of support ist (April/2025), wird auch der Grafiktreiber in den Packages angepasst.
 
Code: 
drmn0: [drm] GPU HANG: ecode 6:1:001a7544, in Renderer [101097]
drmn0: [drm] Resetting chip for stopped heartbeat on rcs0
drmn0: [drm] Renderer[101097] context reset due to GPU hang

Der Fehler ist hier. Es wird mittendrin die GPU resettet.

Die Frage ist nun, warum.
Wie war denn deine Reihenfolge beim freebsd-update? Normal erfolgt das mehrfach, erst der Kernel, dann reboot usw. und am Ende dann die Pakete wie das für die GPU zuständige drm-kmod
Das Laptop steckt jetzt auch und wie vorher als alles ok war am Netzteil? Nicht, dass da noch Energiesparkrams dazwischenfunkt oder so.
 
@mr44er : Die Reihenfolge hab ich quasi nach Handbuch gemacht.
@Andy_m4 : Ich probiers aus. Die Kiste ist ja noch momentan benutzbar und ich noch in der Lernphase ;)

Danke erstmal für die Anregungen.
 
Den Treiber über Ports zu installieren hat nix gebracht. Also habe ich einen
#freebsd-update rollback
gemacht. Der Weg des geringsten Widerstandes.
 
Tatzahn schrieb:
Den Treiber über Ports zu installieren hat nix gebracht.
Zum Vergrößern anklicken....
Schreib' mal die genauen Schritte dazu.
Und "nix gebracht" heißt, das das Fehlerbild das selbe war?
Hat sich etwas bezüglich dmesg verändern?
Lädst Du den Treiber überhaupt? Was passiert bei einem kldload i915kms (oder was auch immer Dein Treiber ist) ?
 
@mr44er nach dem rollback keine Probleme mehr. Die waren auch weg, nachdem ich beim booten den älteren Kernel gewählt habe. Allerdings streikte dann auch wlan :(.
@serie300 Ja. Den Dreierbefehl ' make install clean' eingegeben. Irgendwie wurde dann ein 'make reinstall' oder 'make deinstall' verlangt. Danach keine Fehlermeldung oder Abbruch (den Dreierbefehl noch mal ausgeführt). Aber das kompilieren lief mir verdächtig schnell durch. Wer weiß, was ich mal wieder übersehen habe.
 
Du darfst auch sehr gerne hier Terminalmitschnitte, ls ausgaben etc posten. Man kann immer deutlich besser jemanden helfen, je mehr details man hat.
 
Also ich würde mal wie folgt vorgehen (alles als root und Intel-GPU mal vorausgesetzt):
  • den Ports-Tree (Verzeichnis /usr/ports) leeren, um sicher zu stellen, das da keine störenden Reste mehr drin sind
    (ein rm -rf /usr/ports sollte das erledigen)
  • mit git den Ports-Tree neu runterladen (falls man git noch nicht hat -> pkg install git)
    git clone --depth 1 https://git.FreeBSD.org/ports.git /usr/ports
  • Dann den Greiftreiber kompilieren und installieren:
    cd /usr/ports/graphics/drm-61-kmod
    make
    make install
  • sicherstellen, das die GPU-Firmware verfügbar ist:
    pkg install gpu-firmware-intel-kmod
  • Grafiktreiber mal testweise laden:
    kldload i915kms
  • gucken, ob im Log was aufgetaucht ist:
    tail -n 50 /var/log/messages
  • wenn man startx testet, gucken was so um XServer-Log auftaucht

CommanderZed schrieb:
hier Terminalmitschnitte, ls ausgaben etc posten.
Zum Vergrößern anklicken....
Ergänzung:
Die kann man übrigens ganz unkompliziert mit script aufzeichnen.
Im einfachsten Fall seine Session mit script /tmp/mitschreiben.txt starten und hinterher mit der Tastenkombination Strg-D beenden. Dann hat man ein Record von allem in der Datei /tmp/mitschreiben.txt.
 
Wenn ich das richtig verstanden habe, erledigt sich das Problem von selber, wenn Du mit dem freebsd-update bis zum EOL von FreeBSD 14.1
wartest (31.03.2025). Also irgendwann im April 2025 das freebsd-update auf 14.2 durchführen. Ich mache das auf jeden Fall so.
 
Also ich hab jetzt erstmal es mehr oder wenigernach Handbuch probiert:

#freebsd-update -r 14.2-RELEASE upgrade

#freebsd-update install

#reboot

#freebsd-update install

#pkg-static upgrade -f

#portmaster -af (ich rechnete mit so 20 - 30 Abfragen, geschätzt das zehnfache)

#cd /usr/ports/graphics/drm-kmod/

/usr/ports/graphics/drm-kmod # make install clean
===> License NA accepted by the user
===> drm-kmod-20220907_3 depends on file: /usr/local/sbin/pkg - found
===> Fetching all distfiles required by drm-kmod-20220907_3 for building
===> Extracting for drm-kmod-20220907_3
===> Patching for drm-kmod-20220907_3
===> Configuring for drm-kmod-20220907_3
===> Staging for drm-kmod-20220907_3
===> drm-kmod-20220907_3 depends on package: gpu-firmware-kmod>=20220511 - found
===> drm-kmod-20220907_3 depends on file: /boot/modules/drm.ko - found
===> Generating temporary packing list
====> Compressing man pages (compress-man)
===> Installing for drm-kmod-20220907_3
===> Checking if drm-kmod is already installed
===> drm-kmod-20220907_3 is already installed
You may wish to ``make deinstall'' and install this port again
by ``make reinstall'' to upgrade it properly.
If you really wish to overwrite the old port of drm-kmod
without deleting it first, set the variable "FORCE_PKG_REGISTER"
in your environment or the "make install" command line.
*** Error code 1

Stop.

/usr/ports/graphics/drm-kmod # make deinstall
===> Deinstalling for drm-kmod
===> Deinstalling drm-kmod-20220907_3
Checking integrity... done (0 conflicting)
Deinstallation has been requested for the following 1 packages (of 0 packages in the universe):

Installed packages to be REMOVED:
drm-kmod: 20220907_3

Number of packages to be removed: 1
[1/1] Deinstalling drm-kmod-20220907_3...
[1/1] Deleting files for drm-kmod-20220907_3: 100%


/usr/ports/graphics/drm-kmod # make reinstall
===> Deinstalling for drm-kmod
===> drm-kmod not installed, skipping
===> Installing for drm-kmod-20220907_3
===> Checking if drm-kmod is already installed
===> Registering installation for drm-kmod-20220907_3
Installing drm-kmod-20220907_3...

@Andy_m4 wie kommst du da drauf, dass es der drm-61-kmod Treiber ist?
Ansonsten setze ich mich mal dein Howto um.
 
Tatzahn schrieb:
portmaster -af
Zum Vergrößern anklicken....
portmaster würde ich nicht (mehr) benutzen. Es sei denn, Du hast Gründe dafür.
Das via git zu machen dürfte die bessere Wahl sein.

Tatzahn schrieb:
drm-61-kmod Treiber ist?
Zum Vergrößern anklicken....
Im Prinzip kannst Du auch graphics/drm-kmod nehmen. Das ist ein Metaport, der selbst nix enthält und dann auf die entsprechenden Ports verweist. Da Du sagtest, das er scheinbar nichts kompiliert hat, würde ich es einfach mal direkt mit dem entsprechenden Port probieren.
Vorher alle installierten drm-kmod-Packages entfernen ist sicher auch keine schlechte Idee (pkg delete -g drm-kmod\* oder so).
 
@Andy_m4 der Kompiliervorgang ist ohne Probleme durchgelaufen. Allerdings kam als nächstes das hier:
# pkg install gpu-firmware-intel-kmod
Updating FreeBSD repository catalogue...
FreeBSD repository is up to date.
All repositories are up to date.
pkg: No packages available to install matching 'gpu-firmware-intel-kmod' have been found in the repositories

Das kam bei der Suche heraus:
pkg info gpu-firmware-intel*
gpu-firmware-intel-kmod-alderlake-20230625
gpu-firmware-intel-kmod-broxton-20230625
gpu-firmware-intel-kmod-cannonlake-20230625
gpu-firmware-intel-kmod-dg1-20230625
gpu-firmware-intel-kmod-elkhartlake-20230625
gpu-firmware-intel-kmod-geminilake-20230625
gpu-firmware-intel-kmod-icelake-20230625
gpu-firmware-intel-kmod-kabylake-20230625
gpu-firmware-intel-kmod-rocketlake-20230625
gpu-firmware-intel-kmod-skylake-20230625
gpu-firmware-intel-kmod-tigerlake-20230625
 
Tatzahn schrieb:
to install matching 'gpu-firmware-intel-kmod' have been found in the repositories
Zum Vergrößern anklicken....
Ok

Möglicherweise hast Du ja schon die passende GPU-Firmware installiert (weil vor dem Upgrade hats ja offenbar funktioniert).
Kannst Du nachschauen mit pkg info -g gpu-firmware\*
Ansonsten kann man auch mit pkg install gpu-firmware-kmod alle installieren. :-)
 
Ein ganz klein wenig hasse ich mich selbst dafür, dass ich nun so von der Seite rein grätsche, aber ich glaube, so ein ganz klein bisschen seid ihr auch auf dem Holzweg, oder?

drm macht Mucken, OK, das sehe ich auch und das passt zu schwarzen Flächen im ff und anderen Problemen unter X.
Aber passt das wirklich zu Aussetzern auf der Konsole? Die Konsole braucht doch keinen drm?

Eigentlich braucht auch X keinen drm und ich würde den deshalb zuerst mal ignorieren und ganz weg lassen. Wird er gar nicht benutzt, gar nicht erst geladen, dann kann er doch auch keinen Fehler machen. Dann kann man ja sehen, wie sich die Konsole und X erst mal ohne verhält und danach weiter machen.


Ausdrücklich: dies ist eine Frage an jene, die es besser wissen und keine Empfehlung an den TE, denn nach dem Motto, viele Köche verderben den Brei, sollte man nicht an mehreren Enden anfangen zu spielen.
 
@Andy_m4 ich poste mal die Konsolebefehle samt Ausgabe:

# pkg info -g gpu-firmware\*
gpu-firmware-amd-kmod-aldebaran-20230625_2
gpu-firmware-amd-kmod-arcturus-20230625_2
gpu-firmware-amd-kmod-banks-20230625_2
gpu-firmware-amd-kmod-beige-goby-20230625_2
gpu-firmware-amd-kmod-bonaire-20230625_2
gpu-firmware-amd-kmod-carrizo-20230625_2
gpu-firmware-amd-kmod-cyan-skillfish2-20230625_2
gpu-firmware-amd-kmod-dcn-3-1-4-20230625_2
gpu-firmware-amd-kmod-dcn-3-1-5-20230625_2
gpu-firmware-amd-kmod-dcn-3-1-6-20230625_2
gpu-firmware-amd-kmod-dcn-3-2-0-20230625_2
gpu-firmware-amd-kmod-dcn-3-2-1-20230625_2
gpu-firmware-amd-kmod-dimgrey-cavefish-20230625_2
gpu-firmware-amd-kmod-fiji-20230625_2
gpu-firmware-amd-kmod-gc-10-3-6-20230625_2
gpu-firmware-amd-kmod-gc-10-3-7-20230625_2
gpu-firmware-amd-kmod-gc-11-0-0-20230625_2
gpu-firmware-amd-kmod-gc-11-0-1-20230625_2
gpu-firmware-amd-kmod-gc-11-0-2-20230625_2
gpu-firmware-amd-kmod-gc-11-0-3-20230625_2
gpu-firmware-amd-kmod-gc-11-0-4-20230625_2
gpu-firmware-amd-kmod-green-sardine-20230625_2
gpu-firmware-amd-kmod-hainan-20230625_2
gpu-firmware-amd-kmod-hawaii-20230625_2
gpu-firmware-amd-kmod-kabini-20230625_2
gpu-firmware-amd-kmod-kaveri-20230625_2
gpu-firmware-amd-kmod-mullins-20230625_2
gpu-firmware-amd-kmod-navi10-20230625_2
gpu-firmware-amd-kmod-navi12-20230625_2
gpu-firmware-amd-kmod-navi14-20230625_2
gpu-firmware-amd-kmod-navy-flounder-20230625_2
gpu-firmware-amd-kmod-oland-20230625_2
gpu-firmware-amd-kmod-picasso-20230625_2
gpu-firmware-amd-kmod-pitcairn-20230625_2
gpu-firmware-amd-kmod-polaris10-20230625_2
gpu-firmware-amd-kmod-polaris11-20230625_2
gpu-firmware-amd-kmod-polaris12-20230625_2
gpu-firmware-amd-kmod-psp-13-0-0-20230625_2
gpu-firmware-amd-kmod-psp-13-0-10-20230625_2
gpu-firmware-amd-kmod-psp-13-0-11-20230625_2
gpu-firmware-amd-kmod-psp-13-0-4-20230625_2
gpu-firmware-amd-kmod-psp-13-0-5-20230625_2
gpu-firmware-amd-kmod-psp-13-0-7-20230625_2
gpu-firmware-amd-kmod-psp-13-0-8-20230625_2
gpu-firmware-amd-kmod-raven-20230625_2
gpu-firmware-amd-kmod-raven2-20230625_2
gpu-firmware-amd-kmod-renoir-20230625_2
gpu-firmware-amd-kmod-sdma-5-2-6-20230625_2
gpu-firmware-amd-kmod-sdma-5-2-7-20230625_2
gpu-firmware-amd-kmod-sdma-6-0-0-20230625_2
gpu-firmware-amd-kmod-sdma-6-0-1-20230625_2
gpu-firmware-amd-kmod-sdma-6-0-2-20230625_2
gpu-firmware-amd-kmod-sdma-6-0-3-20230625_2
gpu-firmware-amd-kmod-si58-20230625_2
gpu-firmware-amd-kmod-sienna-cichlid-20230625_2
gpu-firmware-amd-kmod-smu-13-0-0-20230625_2
gpu-firmware-amd-kmod-smu-13-0-10-20230625_2
gpu-firmware-amd-kmod-smu-13-0-7-20230625_2
gpu-firmware-amd-kmod-stoney-20230625_2
gpu-firmware-amd-kmod-tahiti-20230625_2
gpu-firmware-amd-kmod-tonga-20230625_2
gpu-firmware-amd-kmod-topaz-20230625_2
gpu-firmware-amd-kmod-vangogh-20230625_2
gpu-firmware-amd-kmod-vcn-3-1-2-20230625_2
gpu-firmware-amd-kmod-vcn-4-0-0-20230625_2
gpu-firmware-amd-kmod-vcn-4-0-2-20230625_2
gpu-firmware-amd-kmod-vcn-4-0-4-20230625_2
gpu-firmware-amd-kmod-vega10-20230625_2
gpu-firmware-amd-kmod-vega12-20230625_2
gpu-firmware-amd-kmod-vega20-20230625_2
gpu-firmware-amd-kmod-vegam-20230625_2
gpu-firmware-amd-kmod-verde-20230625_2
gpu-firmware-amd-kmod-yellow-carp-20230625_2
gpu-firmware-intel-kmod-alderlake-20230625
gpu-firmware-intel-kmod-broxton-20230625
gpu-firmware-intel-kmod-cannonlake-20230625
gpu-firmware-intel-kmod-dg1-20230625
gpu-firmware-intel-kmod-elkhartlake-20230625
gpu-firmware-intel-kmod-geminilake-20230625
gpu-firmware-intel-kmod-icelake-20230625
gpu-firmware-intel-kmod-kabylake-20230625
gpu-firmware-intel-kmod-rocketlake-20230625
gpu-firmware-intel-kmod-skylake-20230625
gpu-firmware-intel-kmod-tigerlake-20230625
gpu-firmware-kmod-20240401,1
gpu-firmware-radeon-kmod-aruba-20220511
gpu-firmware-radeon-kmod-barts-20220511
gpu-firmware-radeon-kmod-bonaire-20220511
gpu-firmware-radeon-kmod-btc-20220511
gpu-firmware-radeon-kmod-caicos-20220511
gpu-firmware-radeon-kmod-cayman-20220511
gpu-firmware-radeon-kmod-cedar-20220511
gpu-firmware-radeon-kmod-cypress-20220511
gpu-firmware-radeon-kmod-hainan-20220511
gpu-firmware-radeon-kmod-hawaii-20220511
gpu-firmware-radeon-kmod-juniper-20220511
gpu-firmware-radeon-kmod-kabini-20220511
gpu-firmware-radeon-kmod-kaveri-20220511
gpu-firmware-radeon-kmod-mullins-20220511
gpu-firmware-radeon-kmod-oland-20220511
gpu-firmware-radeon-kmod-palm-20220511
gpu-firmware-radeon-kmod-pitcairn-20220511
gpu-firmware-radeon-kmod-r100-20220511
gpu-firmware-radeon-kmod-r200-20220511
gpu-firmware-radeon-kmod-r300-20220511
gpu-firmware-radeon-kmod-r420-20220511
gpu-firmware-radeon-kmod-r520-20220511
gpu-firmware-radeon-kmod-r600-20220511
gpu-firmware-radeon-kmod-r700-20220511
gpu-firmware-radeon-kmod-redwood-20220511
gpu-firmware-radeon-kmod-rs600-20220511
gpu-firmware-radeon-kmod-rs690-20220511
gpu-firmware-radeon-kmod-rs780-20220511
gpu-firmware-radeon-kmod-rv610-20220511
gpu-firmware-radeon-kmod-rv620-20220511
gpu-firmware-radeon-kmod-rv630-20220511
gpu-firmware-radeon-kmod-rv635-20220511
gpu-firmware-radeon-kmod-rv670-20220511
gpu-firmware-radeon-kmod-rv710-20220511
gpu-firmware-radeon-kmod-rv730-20220511
gpu-firmware-radeon-kmod-rv740-20220511
gpu-firmware-radeon-kmod-rv770-20220511
gpu-firmware-radeon-kmod-sumo-20220511
gpu-firmware-radeon-kmod-sumo2-20220511
gpu-firmware-radeon-kmod-tahiti-20220511
gpu-firmware-radeon-kmod-turks-20220511
gpu-firmware-radeon-kmod-verde-20220511

Das scheint sämtlich vorhandene gpu-firmware zu sein. Welche von mir benutzt wird, kann ich dabei nicht erkennen :(.

# pkg install gpu-firmware-kmod
Updating FreeBSD repository catalogue...
FreeBSD repository is up to date.
All repositories are up to date.
Checking integrity... done (0 conflicting)
The most recent versions of packages are already installed

Hmm. den Treiber kompilieren scheint bis jetzt keine Auswirkungen auf das System zu haben.
Der Vollständigkeit halber noch mal die dmesg:

dmesg
---<<BOOT>>---
Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.2-RELEASE releng/14.2-n269506-c8918d6c7412 GENERIC amd64
FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67)
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz (2492.00-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x1fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
XSAVE Features=0x1<XSAVEOPT>
VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 6442450944 (6144 MB)
avail memory = 6074441728 (5793 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <LENOVO TP-83 >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23
Launching APs: 1 2 3
random: entropy device external interface
kbd1 at kbdmux0
vtvga0: <VT VGA driver>
smbios0: <System Management BIOS> at iomem 0xf03d0-0xf03ee
smbios0: Version: 2.6, BCD Revision: 2.6
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
acpi0: <LENOVO TP-83>
acpi_ec0: <Embedded Controller: GPE 0x11, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0xf0000000-0xf03fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
pci0: <simple comms> at device 22.0 (no driver attached)
uart2: <Intel AMT - KT Controller> port 0x50b0-0x50b7 mem 0xf252c000-0xf252cfff irq 19 at device 22.3 on pci0
uart2: Using 1 MSI message
em0: <Intel(R) 82579LM> port 0x5080-0x509f mem 0xf2500000-0xf251ffff,0xf252b000-0xf252bfff irq 20 at device 25.0 on pci0
em0: EEPROM V0.13-3
em0: Using 1024 TX descriptors and 1024 RX descriptors
em0: Using an MSI interrupt
em0: Ethernet address: 00:21:cc:6b:12:37
em0: netmap queues/slots: TX 1/1024, RX 1/1024
ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xf252a000-0xf252a3ff irq 16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
hdac0: <Intel Cougar Point HDA Controller> mem 0xf2520000-0xf2523fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci1: <ACPI PCI bus> on pcib2
iwn0: <Intel Centrino Advanced-N 6205> mem 0xf2400000-0xf2401fff irq 17 at device 0.0 on pci1
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci2: <ACPI PCI bus> on pcib4
sdhci_pci0: <RICOH R5CE823 SD> mem 0xf1400000-0xf14000ff irq 16 at device 0.0 on pci2
sdhci_pci0: 1 slot(s) allocated
ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xf2529000-0xf25293ff irq 23 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci1
usbus1: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Cougar Point AHCI SATA controller> port 0x50a8-0x50af,0x50bc-0x50bf,0x50a0-0x50a7,0x50b8-0x50bb,0x5060-0x507f mem 0xf2528000-0xf25287ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 15.0.
psm0: model Synaptics Touchpad, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounter "TSC-low" frequency 1245953049 Hz quality 1000
Timecounters tick every 1.000 msec
ugen0.1: <Intel EHCI root HUB> at usbus0
ugen1.1: <Intel EHCI root HUB> at usbus1
uhub0 on usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
uhub1 on usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
hdacc0: <Conexant CX20590 HDA CODEC> at cad 0 on hdac0
hdaa0: <Conexant CX20590 Audio Function Group> at nid 1 on hdacc0
pcm0: <Conexant CX20590 (Analog 2.0+HP/2.0)> at nid 31,25 and 35,27 on hdaa0
hdacc1: <Intel Cougar Point HDA CODEC> at cad 3 on hdac0
hdaa1: <Intel Cougar Point Audio Function Group> at nid 1 on hdacc1
pcm1: <Intel Cougar Point (HDMI/DP 8ch)> at nid 5 on hdaa1
pcm2: <Intel Cougar Point (HDMI/DP 8ch)> at nid 6 on hdaa1
pcm3: <Intel Cougar Point (HDMI/DP 8ch)> at nid 7 on hdaa1
Trying to mount root from zfs:zroot/ROOT/default []...
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <Samsung SSD 840 EVO 250GB EXT0BB0Q> ACS-2 ATA SATA 3.x device
ada0: Serial Number S1DBNSADA95810B
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 238475MB (488397168 512 byte sectors)
ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN>
ses0 at ahciem0 bus 0 scbus4 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0
ses0: cd0,pass1 in 'Slot 01', SATA Slot: scbus1 target 0
cd0 at ahcich1 bus 0 scbus1 target 0 lun 0
cd0: <MATSHITA DVD-RAM UJ8A0A SB02> Removable CD-ROM SCSI device
cd0: Serial Number YK95 330845
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: 0MB (1 2048 byte sectors)
(cd0:ahcich1:0:0:0): READ(10). CDB: 28 00 00 00 00 00 00 00 01 00
(cd0:ahcich1:0:0:0): CAM status: SCSI Status Error
(cd0:ahcich1:0:0:0): SCSI status: Check Condition
(cd0:ahcich1:0:0:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range)
(cd0:ahcich1:0:0:0): Command Specific Info: 0xa90000
(cd0:ahcich1:0:0:0): Error 22, Unretryable error
(cd0:ahcich1:0:0:0): cddone: got error 0x16 back
(cd0:ahcich1:0:0:0): READ(10). CDB: 28 00 00 00 00 00 00 00 01 00
(cd0:ahcich1:0:0:0): CAM status: SCSI Status Error
(cd0:ahcich1:0:0:0): SCSI status: Check Condition
(cd0:ahcich1:0:0:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range)
(cd0:ahcich1:0:0:0): Command Specific Info: 0xa90000
(cd0:ahcich1:0:0:0): Error 22, Unretryable error
(cd0:ahcich1:0:0:0): cddone: got error 0x16 back
(cd0:ahcich1:0:0:0): READ(10). CDB: 28 00 00 00 00 00 00 00 01 00
(cd0:ahcich1:0:0:0): CAM status: SCSI Status Error
(cd0:ahcich1:0:0:0): SCSI status: Check Condition
(cd0:ahcich1:0:0:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range)
(cd0:ahcich1:0:0:0): Command Specific Info: 0xa90000
(cd0:ahcich1:0:0:0): Error 22, Unretryable error
(cd0:ahcich1:0:0:0): cddone: got error 0x16 back
(cd0:ahcich1:0:0:0): READ(10). CDB: 28 00 00 00 00 00 00 00 01 00
(cd0:ahcich1:0:0:0): CAM status: SCSI Status Error
(cd0:ahcich1:0:0:0): SCSI status: Check Condition
(cd0:ahcich1:0:0:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range)
(cd0:ahcich1:0:0:0): Command Specific Info: 0xa90000
(cd0:ahcich1:0:0:0): Error 22, Unretryable error
(cd0:ahcich1:0:0:0): cddone: got error 0x16 back
(cd0:ahcich1:0:0:0): READ(10). CDB: 28 00 00 00 00 00 00 00 01 00
(cd0:ahcich1:0:0:0): CAM status: SCSI Status Error
(cd0:ahcich1:0:0:0): SCSI status: Check Condition
(cd0:ahcich1:0:0:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range)
(cd0:ahcich1:0:0:0): Command Specific Info: 0xa90000
(cd0:ahcich1:0:0:0): Error 22, Unretryable error
(cd0:ahcich1:0:0:0): cddone: got error 0x16 back
(cd0:ahcich1:0:0:0): READ(10). CDB: 28 00 00 00 00 00 00 00 01 00
(cd0:ahcich1:0:0:0): CAM status: SCSI Status Error
(cd0:ahcich1:0:0:0): SCSI status: Check Condition
(cd0:ahcich1:0:0:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range)
(cd0:ahcich1:0:0:0): Command Specific Info: 0xa90000
(cd0:ahcich1:0:0:0): Error 22, Unretryable error
(cd0:ahcich1:0:0:0): cddone: got error 0x16 back
(cd0:ahcich1:0:0:0): READ(10). CDB: 28 00 00 00 00 00 00 00 01 00
(cd0:ahcich1:0:0:0): CAM status: SCSI Status Error
(cd0:ahcich1:0:0:0): SCSI status: Check Condition
(cd0:ahcich1:0:0:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range)
(cd0:ahcich1:0:0:0): Command Specific Info: 0xa90000
(cd0:ahcich1:0:0:0): Error 22, Unretryable error
(cd0:ahcich1:0:0:0): cddone: got error 0x16 back
(cd0:ahcich1:0:0:0): READ(10). CDB: 28 00 00 00 00 00 00 00 01 00
(cd0:ahcich1:0:0:0): CAM status: SCSI Status Error
(cd0:ahcich1:0:0:0): SCSI status: Check Condition
(cd0:ahcich1:0:0:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range)
(cd0:ahcich1:0:0:0): Command Specific Info: 0xa90000
(cd0:ahcich1:0:0:0): Error 22, Unretryable error
(cd0:ahcich1:0:0:0): cddone: got error 0x16 back
(cd0:ahcich1:0:0:0): READ(10). CDB: 28 00 00 00 00 00 00 00 01 00
(cd0:ahcich1:0:0:0): CAM status: SCSI Status Error
(cd0:ahcich1:0:0:0): SCSI status: Check Condition
(cd0:ahcich1:0:0:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range)
(cd0:ahcich1:0:0:0): Command Specific Info: 0xa90000
(cd0:ahcich1:0:0:0): Error 22, Unretryable error
(cd0:ahcich1:0:0:0): cddone: got error 0x16 back
(cd0:ahcich1:0:0:0): READ(10). CDB: 28 00 00 00 00 00 00 00 01 00
(cd0:ahcich1:0:0:0): CAM status: SCSI Status Error
(cd0:ahcich1:0:0:0): SCSI status: Check Condition
(cd0:ahcich1:0:0:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range)
(cd0:ahcich1:0:0:0): Command Specific Info: 0xa90000
(cd0:ahcich1:0:0:0): Error 22, Unretryable error
(cd0:ahcich1:0:0:0): cddone: got error 0x16 back
GEOM_ELI: Device ada0p3.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI: Crypto: accelerated software
Root mount waiting for: usbus0 usbus1
uhub0: 3 ports with 3 removable, self powered
uhub1: 3 ports with 3 removable, self powered
ugen0.2: <vendor 0x8087 product 0x0024> at usbus0
uhub2 on uhub0
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
ugen1.2: <vendor 0x8087 product 0x0024> at usbus1
uhub3 on uhub1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
Root mount waiting for: usbus0 usbus1
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
ugen0.3: <Chicony Electronics Co., Ltd. Integrated Camera> at usbus0
ugen1.3: <Lenovo F5521gw> at usbus1
GEOM_ELI: Device ada0p2.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI: Crypto: accelerated software
[drm] Got Intel graphics stolen memory base 0xdba00000, size 0x4000000
drmn0: <drmn> on vgapci0
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
lkpi_iic0: <LinuxKPI I2C> on drmn0
iicbus0: <Philips I2C bus> on lkpi_iic0
iic0: <I2C generic I/O> on iicbus0
lkpi_iic1: <LinuxKPI I2C> on drmn0
iicbus1: <Philips I2C bus> on lkpi_iic1
iic1: <I2C generic I/O> on iicbus1
lkpi_iic2: <LinuxKPI I2C> on drmn0
iicbus2: <Philips I2C bus> on lkpi_iic2
iic2: <I2C generic I/O> on iicbus2
lkpi_iic3: <LinuxKPI I2C> on drmn0
iicbus3: <Philips I2C bus> on lkpi_iic3
iic3: <I2C generic I/O> on iicbus3
lkpi_iic4: <LinuxKPI I2C> on drmn0
iicbus4: <Philips I2C bus> on lkpi_iic4
iic4: <I2C generic I/O> on iicbus4
lkpi_iic5: <LinuxKPI I2C> on drmn0
iicbus5: <Philips I2C bus> on lkpi_iic5
iic5: <I2C generic I/O> on iicbus5
lkpi_iic6: <LinuxKPI I2C> on drmn0
iicbus6: <Philips I2C bus> on lkpi_iic6
iic6: <I2C generic I/O> on iicbus6
iic6: detached
iicbus6: detached
lkpi_iic6: detached
sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)!
lkpi_iic6: <LinuxKPI I2C> on drm4
iicbus6: <Philips I2C bus> on lkpi_iic6
iic6: <I2C generic I/O> on iicbus6
lkpi_iic7: <LinuxKPI I2C> on drm7
iicbus7: <Philips I2C bus> on lkpi_iic7
iic7: <I2C generic I/O> on iicbus7
lkpi_iic8: <LinuxKPI I2C> on drm8
iicbus8: <Philips I2C bus> on lkpi_iic8
iic8: <I2C generic I/O> on iicbus8
[drm] Initialized i915 1.6.0 20201103 for drmn0 on minor 0
VT: Driver priority 0 too low. Current 100
fbd0: not attached to vt(4) console; another device has precedence (err=17)
ichsmb0: <Intel Cougar Point SMBus controller> port 0xefa0-0xefbf mem 0xf2524000-0xf25240ff irq 18 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: Embedded MOF found
ACPI: \134_SB.WMI1.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361)
acpi_wmi1: <ACPI-WMI mapping> on acpi0
acpi_wmi1: Embedded MOF found
ACPI: \134_SB.WMI2.WQBB: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361)
wlan0: Ethernet address: 08:11:96:26:40:6c
lo0: link state changed to UP
iwn0: iwn_read_firmware: ucode rev=0x12a80601
wlan0: link state changed to UP
umodem0 on uhub3
umodem0: <Lenovo F5521gw, class 2/0, rev 2.00/0.00, addr 3> on usbus1
umodem0: data interface 2, has CM over data, has break
umodem1 on uhub3
umodem1: <Lenovo F5521gw, class 2/0, rev 2.00/0.00, addr 3> on usbus1
umodem1: data interface 4, has CM over data, has break
umodem2 on uhub3
umodem2: <Lenovo F5521gw, class 2/0, rev 2.00/0.00, addr 3> on usbus1
umodem2: data interface 10, has CM over data, has break
cdce0 on uhub3
cdce0: <Lenovo F5521gw, class 2/0, rev 2.00/0.00, addr 3> on usbus1
ue0: <USB Ethernet> on cdce0
ue0: Ethernet address: 02:80:37:ec:02:00
Security policy loaded: MAC/ntpd (mac_ntpd)
 
nun
Tatzahn schrieb:
[drm] Initialized i915 1.6.0 20201103 for drmn0 on minor 0
Zum Vergrößern anklicken....
zuvor
Tatzahn schrieb:
drmn0: [drm] GPU HANG: ecode 6:1:001a7544, in Renderer [101097]
drmn0: [drm] Resetting chip for stopped heartbeat on rcs0
drmn0: [drm] Renderer[101097] context reset due to GPU hang
Zum Vergrößern anklicken....
Tatzahn schrieb:
Hmm. den Treiber kompilieren scheint bis jetzt keine Auswirkungen auf das System zu haben.
Zum Vergrößern anklicken....
So weit ich es erkenne eben doch, siehe oben.
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Zurück
Oben