Rpoblem bei der Installation von FreeBSD 5.4

M00F--{m_Fµ<KA}

fucking 'tallica fan
AMoin erstmal

Also ich hatte mir vorgestern FreeBSD5.4 für i386 rechner runtergeladen.
Dann hatte ich mit der Boot-only CD gebootet aber als ich dann bei der Installation auf Standard gegangen bin, kam diese Fehlermeldung:

No Disk found! Please verfiy that your disc controller is bein properly probed at boot time. See the hardware Guide on the Documentation menu for clues on diagnosing this tye of Problem.

Kann mir vielleicht jemand weiterhelfen, habe schon alles für mich mögliche probiert.

Bitte helft mir!
 
willkommen im forum und schön das du freebsd ausprobiertst :)
freebsd hat wohl deinen ide/scsi/sata-controller nicht erkannt und da wären wir schon bei meinen gegenfragen:
um was für ein mainboard handelt es sich denn?
was für ein controller?
ohne die angaben kann ich nur im leeren stochern :D
 
ouTi said:
boot-only = boot-only und nicht install

zieh dir die richtige iso, dann klappts auch
Wie sicher bist Du Dir da? boot-only bootet zwar, aber die Installation sollte trotzdem möglich sein. AFAIR wird auf der CD bloß nichts als Package bereitgestellt, sondern der Krams muß via ftp bezogen werden.

So würde ich das jedenfalls deuten, man möge mich bitte korrigiere, wenn ich mich da irre.
 
man kann vom der bootonly dann als installquelle vom ftp auswählen oder bei sysinstall auf cd1 mit den paketen wechseln als installmedium und von dort aus installieren



sein rechner oder board ist ein medion mit board oder typ
Hersteller : MICRO-STAR INTERNATIONAL CO., LTD
MP Unterstützung : 1 Prozessor(en)
MPS Version : 1.40
Modell : MS-7012
System BIOS : 02/24/2004-Springdale-G-6A79AM4DC-00
Chipsatz : Intel 865/848 (Springdale)

IDE Primary Master ST3160021A
IDE Primary Slave Samsung SV2001H

IDE Secondary Master Pioneer DVD RW DVR-
IDE Secondary Slave Sony DVD-Rom DDV 1612
 
Last edited:
Nun, ich habe es auch mal mit einer Boot-only probiert, irgendwas hat nicht geklappt, ich bin dann zur CD1 gewechselt und gut isses. Falls Du DSL hast, saugt Dir das schnell mal runter und halte Dich nicht mit dem anderen Ding auf.

Gruß,
ww
 
Hi M00f... wie auch immer, was du mal probieren könntest wäre von einer FreeBSD-Life CD und zwar FreeSBIE zu booten, ob es da klappt. Ansonsten könnte es vieleicht wirklich an einem Kompatibilitätsproblem deiner Hardware liegen.

Nicht wundern FreeSBIE basiert noch auf der Version 5.3, aber zum Probieren und Kennenlernen durch aus geeignet :)
 
Ansonsten könnte es vieleicht wirklich an einem Kompatibilitätsproblem deiner Hardware liegen.

meine vermutung ist das auch das sich die zwei platten behacken, naja ausbauen...und...???

die live-cd kann man installieren mit umwegen, du kannst damit deine hardware prüfen bzw. wie deine laufwerke und chipsatz etc. erkannt werden und ob booten bis desktop möglich ist

ps: im handbuch steht auch was von einem hardwareeditor wo man die hardware aussucht für die bsd treiber laden soll, wie ruft man den das ding auf, weiß das jemand

hier ist noch eine livecd mit 4.4

http://livecd.sourceforge.net/

die cd ist besser:5.4 mit desktop
http://www.offmyserver.com/cgi-bin/store/bsdlive.html
 
Last edited:
So hab die Festplatt dann mal rausgenomemn und dann klappte das auch.

Aber dann hatte ich Xorg konfiguriert undj etzt kommt die Fehlermeldung "No Screen Found".

Habe ich was falsch gemacht?

Wie schreibe ich eigentlich diese Zeichen "" auf der englischen Tastatur?
 
Sag mal muss ich jetzt z.B. hier:
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Glidepad" "SendCoreEvents"
InputDevice "Main Keyboard" "CoreKeyboard"
EndSection


da wo Screen0 steht den Namen meines Monitor hinschreiben oder kann ich das so lassen??
 
nein du mußt ein xorg -configure machen, dann ermittelt xorg dein monitor und deine garaphikkarte, in der konsole stehen immer die nächsten schritte die gemacht werden müssen, siehe auch handbuch: x11 configuration ,dort ist es genau beschrieben oder thread linuxforum, der ablauf zu xfree86 ist genau der gleiche nur xorg ist ab 5.x eben neuer

deutsche tastatur eintragen

Option "XkbLayout" "de"

so bei tastaur einragen oder miteintragen , ich glaube die zeile fehlt oder steht dort "us" .

schön das es noch geklappt hat!
muster einer xorg.conf

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands:
#
# cp /etc/X11/xorg.conf /etc/X11/xorg.conf.custom
# sudo sh -c 'md5sum /etc/X11/xorg.conf >/var/lib/xfree86/xorg.conf.md5sum'
# sudo dpkg-reconfigure xserver-xorg

Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/CID"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
# paths to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection

Section "Module"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "type1"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de" ----deine tastatur hier eintragen
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection

Section "Device"
Identifier "Silicon Integrated Systems (SiS) 630/730 PCI/AGP VGA Display Adapter"
Driver "sis"
BusID "PCI:1:0:0"
EndSection

Section "Monitor"
Identifier "Standardbildschirm"
Option "DPMS"
HorizSync 28-49
VertRefresh 43-72
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Silicon Integrated Systems (SiS) 630/730 PCI/AGP VGA Display Adapter"
Monitor "Standardbildschirm"
DefaultDepth 24 ----fehlt, hier farben eintragen ,16 oder 24,
SubSection "Display"
Depth 24 ------nochmal farbe
Modes "1024x768" ------deine monitoraulösung hier eintagen oder rest löschen
EndSubSection
EndSection

Section "ServerLayout" -???? das brauch man eigentlich nicht, kann sein ist in deiner garnicht drin oder so lassen
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection

Section "DRI"
Mode 0666
EndSection
ende der org.conf, rest handbuch unter x11 oder hier fragen
###
:D
 
Last edited:
Back
Top