mrtonik
Well-Known Member
Hallo,
ich habe wiedermal mein kleines Netbook hervorgekramt. Es handelt sich um ein Dell Mini 9 (Atom N270, 16gb SSD, 2gb Ram, Intel GMA 950, ...).
Leider verhält sich das System teilweise ziemlich langsam wenn es etwas auf der Platte arbeiten muss.
Beispiel "portsnap extract"
smartctl -a
Das System ist frisch installiert. Ein großes / (ufs2+su). Ein kleineres Swap. Einziges Package ist smartmontools.
Weiß jemand wieso das kleine Ding so rumzickt?
Gruß
mrtonik
ich habe wiedermal mein kleines Netbook hervorgekramt. Es handelt sich um ein Dell Mini 9 (Atom N270, 16gb SSD, 2gb Ram, Intel GMA 950, ...).
Leider verhält sich das System teilweise ziemlich langsam wenn es etwas auf der Platte arbeiten muss.
Beispiel "portsnap extract"
Code:
time portsnap extract
.
.
.
108.792u 186.844s 2:16:28.06 3,69% 64+633k 23238+357570io 1pf+0w
smartctl -a
Code:
smartctl 5.39.1 2010-01-28 r3054 [FreeBSD 8.1-RELEASE i386] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: STEC PATA 16GB
Serial Number: STM0000CCEDF
Firmware Version: E5221-10
User Capacity: 15,408,046,080 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 6
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Mon Oct 18 11:35:17 2010 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x59) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 115) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 025 Pre-fail Always - 0
2 Throughput_Performance 0x0027 100 100 025 Pre-fail Always - 0
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 80
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 57
13 Read_Soft_Error_Rate 0x002e 100 100 010 Old_age Always - 0
100 Unknown_Attribute 0x0032 097 097 005 Old_age Always - 5488501
103 Unknown_Attribute 0x0002 100 100 090 Old_age Always - 0
170 Unknown_Attribute 0x0033 099 099 010 Pre-fail Always - 93
171 Unknown_Attribute 0x0032 100 100 010 Old_age Always - 0
172 Unknown_Attribute 0x0032 100 100 010 Old_age Always - 0
173 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 0
174 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 0
184 End-to-End_Error 0x0033 100 100 090 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 001 Old_age Always - 0
188 Command_Timeout 0x0032 000 000 000 Old_age Always - 0
194 Temperature_Celsius 0x0002 000 000 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0002 100 100 025 Old_age Always - 0
198 Offline_Uncorrectable 0x0003 100 100 025 Pre-fail Always - 0
199 UDMA_CRC_Error_Count 0x0032 000 000 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Das System ist frisch installiert. Ein großes / (ufs2+su). Ein kleineres Swap. Einziges Package ist smartmontools.
Weiß jemand wieso das kleine Ding so rumzickt?
Gruß
mrtonik