carbuncle
Rainbow Six
Servus,
hab zum Geburtstag eine Casion EX-S600 bekommen. Nun wollte ich das kleine Teil an meiner FreeBSD Workstation betreiben. Die Kamera kann 2 Protokolle, 1. das Umass Protokoll und 2. Das PTP Picture Bridge Protokoll.
Nummer 2 (PTP) funktioniert mit GPhoto2 sauber auch mit USB2.0 Speed. Die Kamera ist richtig schnell.
Nummer1 (umass) funktioniert nicht. Nach dem man bei der Kamera auf den USB Knopf drückt (Kamera connected) meldet FreeBSD 6.2Rel mit einem Kernel Panic. Die Kamera wird noch erkannt, dmesg sagt mir dass sie eine Casio dran hat, das wars dann aber auch.
Hat jemand auch so ein Problem?
uname -a:
Dmesg:
hab zum Geburtstag eine Casion EX-S600 bekommen. Nun wollte ich das kleine Teil an meiner FreeBSD Workstation betreiben. Die Kamera kann 2 Protokolle, 1. das Umass Protokoll und 2. Das PTP Picture Bridge Protokoll.
Nummer 2 (PTP) funktioniert mit GPhoto2 sauber auch mit USB2.0 Speed. Die Kamera ist richtig schnell.
Nummer1 (umass) funktioniert nicht. Nach dem man bei der Kamera auf den USB Knopf drückt (Kamera connected) meldet FreeBSD 6.2Rel mit einem Kernel Panic. Die Kamera wird noch erkannt, dmesg sagt mir dass sie eine Casio dran hat, das wars dann aber auch.
Hat jemand auch so ein Problem?
uname -a:
Code:
FreeBSD tobias.universum.local 6.2-RELEASE FreeBSD 6.2-RELEASE #0: Wed Jan 24 20:45:12 CET 2007 tobias@tobias.universum.local:/usr/obj/usr/src/sys/Berlin i386
Dmesg:
Code:
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #0: Wed Jan 24 20:45:12 CET 2007
tobias@tobias.universum.local:/usr/obj/usr/src/sys/Berlin
ACPI APIC Table: <A M I OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Sempron(tm) Processor 2800+ (1600.07-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x20fc2 Stepping = 2
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
Features2=0x1<SSE3>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow+,3DNow>
AMD Features2=0x1<LAHF>
real memory = 805109760 (767 MB)
avail memory = 774316032 (738 MB)
ioapic0 <Version 0.3> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA K8T800Pro host to PCI bridge> mem 0xe0000000-0xefffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
nvidia0: <GeForce FX 5200> mem 0xfd000000-0xfdffffff,0xc0000000-0xcfffffff irq 16 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0xe800-0xe8ff mem 0xfebff000-0xfebfffff irq 17 at device 9.0 on pci0
ahc0: [GIANT-LOCKED]
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
fwohci0: <VIA Fire II (VT6306)> port 0xec00-0xec7f mem 0xfebfe800-0xfebfefff irq 19 at device 11.0 on pci0
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:11:06:00:00:00:61:ab
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:11:06:00:61:ab
fwe0: Ethernet address: 02:11:06:00:61:ab
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
atapci0: <VIA 8237 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 15.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
uhci0: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 21 at device 16.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 21 at device 16.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 21 at device 16.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 21 at device 16.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xfebfe400-0xfebfe4ff irq 21 at device 16.4 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pcm0: <VIA VT8237> port 0xd400-0xd4ff irq 22 at device 17.5 on pci0
pcm0: <Avance Logic ALC655 AC97 Codec>
pcm0: <VIA DXS Enabled: DXS 4 / SGD 1 / REC 1>
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xd000-0xd0ff mem 0xfebfe000-0xfebfe0ff irq 23 at device 18.0 on pci0
miibus0: <MII bus> on vr0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:13:d3:cb:03:4e
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcf7ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
uhub5: Mitsumi Electric Hub in Apple Extended USB Keyboard, class 9/0, rev 1.10/4.10, addr 2
uhub5: 3 ports with 2 removable, bus powered
ums0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev 1.10/3.00, addr 3, iclass 3/1
ums0: 5 buttons and Z dir.
ukbd0: Mitsumi Electric Apple Extended USB Keyboard, rev 1.10/4.10, addr 4, iclass 3/1
kbd2 at ukbd0
uhid0: Mitsumi Electric Apple Extended USB Keyboard, rev 1.10/4.10, addr 4, iclass 3/1
Timecounter "TSC" frequency 1600070177 Hz quality 800
Timecounters tick every 1.000 msec
acd0: DVDR <HL-DT-ST DVDRAM GSA-4120B/A101> at ata0-master UDMA33
acd1: DVDROM <Pioneer DVD-ROM ATAPIModel DVD-105S 0122/E1.22> at ata1-master UDMA33
Waiting 5 seconds for SCSI devices to settle
da0 at ahc0 bus 0 target 0 lun 0
da0: <QUANTUM ATLAS10K2-TY367L DA40> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da0: 34732MB (71132960 512 byte sectors: 255H 63S/T 4427C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <QUANTUM ATLAS10K2-TY367L DA40> Fixed Direct Access SCSI-3 device
da1: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da1: 34732MB (71132960 512 byte sectors: 255H 63S/T 4427C)
cd1 at ata1 bus 0 target 0 lun 0
cd1: <PIONEER DVD-ROM DVD-105 1.22> Removable CD-ROM SCSI-0 device
cd1: 33.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
cd0 at ata0 bus 0 target 0 lun 0
cd0: <HL-DT-ST DVDRAM GSA-4120B A101> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/da0s1a
WARNING: / was not properly dismounted
WARNING: /tmp was not properly dismounted
/tmp: mount pending error: blocks 16 files 5
WARNING: /usr was not properly dismounted
/usr: mount pending error: blocks 80 files 3
WARNING: /var was not properly dismounted
/var: mount pending error: blocks 160 files 12
WARNING: /home was not properly dismounted
NVRM: detected agp.ko, aborting NVIDIA AGP setup!
g_vfs_done():acd0[READ(offset=32768, length=2048)]error = 5
g_vfs_done():acd0[READ(offset=32768, length=2048)]error = 5