Was ist los mit meiner Festplatte?

F

Fry

Guest
Guten Morgen,
beim booten meines NetBSD/i386 1.6.1 fallen mir immer folgende Zeilen auf:

boot device: wd1
root on wd1a dumps on wd1b
root file system type: ffswd1: transfer error, downgrading to Ultra-DMA mode 2
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
wd1(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
wd1a: error writing fsbn 16 of 16-19 (wd1 bn 79; cn 0 tn 1 sn 16), retrying
wd1: (aborted command, interface CRC error)
wd1: soft error (corrected)
wd1e: error writing fsbn 39378752 of 39378752-39378815 (wd1 bn 45716048; cn 45353 tn 3 sn 35), retrying
wd1: (aborted command, interface CRC error)
wd1: soft error (corrected)

Das selbe hab ich auch schon unter OpenBSD beobachtet.

Weiss jemand wieso es zu diesem Fehler kommt, und wie man ihn eventl. beheben kann?

Gruss TheNight
 
Hier noch meine ganze dmesg:

NetBSD 1.6.1 (GENERIC) #0: Tue Apr 8 12:05:52 UTC 2003
autobuild@tgm.daemon.org:/autobuild/netbsd-1-6/i386/OBJ/autobuild/netbsd-1-6/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon Model 4 (Thunderbird) (686-class), 908.16 MHz
cpu0: I-cache 64 KB 64b/line 2-way, D-cache 64 KB 64b/line 2-way
cpu0: L2 cache 256 KB 64b/line 16-way
cpu0: features 183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 183f9ff<PGE,MCA,CMOV,FGPAT,PSE36,MMX>
cpu0: features 183f9ff<FXSR>
total memory = 511 MB
avail memory = 467 MB
using 6144 buffers containing 26292 KB of memory
BIOS32 rev. 0 found at 0xf0f50
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies VT8363 KT133 System Controller (rev. 0x03)
agp0 at pchb0: aperture at 0xe6000000, size 0x10000000
ppb0 at pci0 dev 1 function 0: VIA Technologies VT8363 KT133 PCI to AGP Bridge (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: Nvidia Corporation GeForce2 MX [NV11] (rev. 0xa1)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 4 function 0
pcib0: VIA Technologies VT82C686A (Apollo KX133) PCI-ISA Bridge (rev. 0x40)
pciide0 at pci0 dev 4 function 1: VIA Technologies VT82C686A (Apollo KX133) ATA100 controller
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
pciide0: disabling primary channel (no drives)
pciide0: secondary channel configured to compatibility mode
atapibus0 at pciide0 channel 1: 2 targets
cd0 at atapibus0 drive 0: <_NEC DV-5800A, , 1.90> type 5 cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd1 at atapibus0 drive 1: <4X4X32, , 3.VR> type 5 cdrom removable
cd1: 32-bit data port
cd1: drive supports PIO mode 4, DMA mode 2
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
cd1(pciide0:1:1): using PIO mode 4, DMA mode 2 (using DMA data transfers)
uhci0 at pci0 dev 4 function 2: VIA Technologies VT83C572 USB Controller (rev. 0x16)
uhci0: interrupting at irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 4 function 3: VIA Technologies VT83C572 USB Controller (rev. 0x16)
uhci1: interrupting at irq 9
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pchb1 at pci0 dev 4 function 4
pchb1: VIA Technologies VT82C686A SMBus Controller (rev. 0x40)
auvia0 at pci0 dev 4 function 5: VIA VT82C686A AC'97 Audio (rev 0x50)
auvia0: interrupting at irq 9
auvia0: ICE17 codec; headphone, 18 bit DAC, 18 bit ADC, Unknown 3D
audio0 at auvia0: full duplex, mmap, independent
vr0 at pci0 dev 9 function 0: VIA VT6102 (Rhine II) 10/100 Ethernet
vr0: interrupting at irq 9
vr0: Ethernet address: 00:05:5d:a1:54:92
sqphy0 at vr0 phy 8: Seeq 80225 10/100 media interface, rev. 0
sqphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bktr0 at pci0 dev 10 function 0
bktr0: interrupting at irq 9
bktr0: Warning - card vendor 0x11bd (model 0x001c) unknown.
bktr0: Pinnacle/Miro TV, <no> tuner.
Brooktree product 0x0878 (miscellaneous multimedia, revision 0x11) at pci0 dev 10 function 1 not configured
pciide1 at pci0 dev 17 function 0: Promise Ultra100/ATA Bus Master IDE Accelerator (rev. 0x02)
pciide1: bus-master DMA support present
pciide1: primary channel configured to native-PCI mode
pciide1: using irq 10 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <IC35L040AVER07-0>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 39266 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 80418240 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd1 at pciide1 channel 0 drive 1: <IC35L080AVVA07-0>
wd1: drive supports 16-sector PIO transfers, LBA addressing
wd1: 78533 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 160836480 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
wd1(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
pciide1: secondary channel configured to native-PCI mode
pciide1: disabling secondary channel (no drives)
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
biomask ef65 netmask ef65 ttymask ffe7
Kernelized RAIDframe activated
wd0: no disk label
uhub2 at uhub1 port 1
uhub2: Texas Instruments TUSB2046 hub, class 9/0, rev 1.10/1.25, addr 2
uhub2: 4 ports with 4 removable, self powered
wd0: no disk label
boot device: wd1
root on wd1a dumps on wd1b
root file system type: ffs
wd1: transfer error, downgrading to Ultra-DMA mode 2
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
wd1(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
wd1a: error writing fsbn 16 of 16-19 (wd1 bn 79; cn 0 tn 1 sn 16), retrying
wd1: (aborted command, interface CRC error)
wd1: soft error (corrected)
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wd1e: error writing fsbn 39378752 of 39378752-39378815 (wd1 bn 45716048; cn 45353 tn 3 sn 35), retrying
wd1: (aborted command, interface CRC error)
wd1: soft error (corrected)
 
Original geschrieben von TheNight
Hier noch meine ganze dmesg:

wd1: transfer error, downgrading to Ultra-DMA mode 2
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
wd1(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
wd1a: error writing fsbn 16 of 16-19 (wd1 bn 79; cn 0 tn 1 sn 16), retrying
wd1: (aborted command, interface CRC error)
wd1: soft error (corrected)
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wd1e: error writing fsbn 39378752 of 39378752-39378815 (wd1 bn 45716048; cn 45353 tn 3 sn 35), retrying
wd1: (aborted command, interface CRC error)
wd1: soft error (corrected)
Zum Vergrößern anklicken....

Hallo erstmal


Deine Festplatte unterstützt UDMA 5, jedoch ist wohl das IDE-Kabel was du benutzt nicht für solche Transferraten ausgelegt.

Du muss die neueren 80-adrigen Kabel benutzen um UDMA 5 haben zu können.

Ich tippe darauf, dass du ein älteres 40-adriges Kabel benutzt.

Soll es der Fall sein, dass du doch ein 80-adriges Kabel benutzt, dann liegt es vielleicht daran, dass mit deinem Kabel etwas nicht stimmt, weil die CRC-Fehler tauchen dann auf, wenn die Übertragung nicht 100% genau ist.

Kabeltaustausch kann abhilfe schaffen.


Gruß

CW
 
Zuletzt bearbeitet:
Hallo,
das Problem ist gelöst! Das benutzte Kabel hatte 80 Adern, aber ist vermutlich beschädigt oder sonstwie kaputt.
Ich hab es mit einem anderen 80-adrigem Kabel ausgetauscht, nun downgradet NetBSD auch nicht mehr auf UDMA 2.

Vielen Dank ColdWisdom!

Gruss TheNight
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Zurück
Oben