X startet nicht / iwn0 weg?

guru

Well-Known Member
Guten Abend!

Ich benutze hier FreeBSD 11.0 i386 einem HP 6730b mit einer Intel GMA 4500MHD und versuche, X aufzusetzen. Ich habe xorg per pkg installiert, sowie mate. Manuell hatte ich noch xf86-video-fbdev nachinstalliert, was ich aus dem Log erschließen konnte. So wie ich das sehe, läuft der Intel-Treiber nicht, daraufhin fällt er auf den VESA zurück ... der auch nicht läuft? Das Logfile hab ich mal ans Ende des Posts gepackt.

Was ich weiters komisch finde, unter dmesg wird mir die WiFi-Karte angezeigt, unter ifconfig jedoch nicht mehr?
Code:
iwn0: <Intel WiFi Link 5100> mem 0x98700000-0x98701fff irq 17 at device 0.0 on pci1
Wie kann ich auf diese zugreifen?

Danke euch. :)

Code:
[   611.504]
X.Org X Server 1.17.4
Release Date: 2015-10-28
[   611.504] X Protocol Version 11, Revision 0
[   611.504] Build Operating System: FreeBSD 11.0-RELEASE-p6 i386
[   611.504] Current Operating System: FreeBSD 6730b 11.0-RELEASE-p1 FreeBSD 11.0-RELEASE-p1 #0 r306420: Thu Sep 29 03:40:55 UTC 2016     root@releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC i386
[   611.504] Build Date: 03 January 2017  06:59:53AM
[   611.504] 
[   611.504] Current version of pixman: 0.34.0
[   611.504]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[   611.504] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   611.504] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan  9 22:40:38 2017
[   611.504] (II) Loader magic: 0x8238ff0
[   611.504] (II) Module ABI versions:
[   611.504]     X.Org ANSI C Emulation: 0.4
[   611.504]     X.Org Video Driver: 19.0
[   611.504]     X.Org XInput driver : 21.0
[   611.504]     X.Org Server Extension : 9.0
[   611.504] (--) PCI:*(0:0:2:0) 8086:2a42:103c:30dd rev 7, Mem @ 0x90000000/4194304, 0x80000000/268435456, I/O @ 0x000060f0/8, BIOS @ 0x????????/65536
[   611.504] (--) PCI: (0:0:2:1) 8086:2a43:103c:30dd rev 7, Mem @ 0x90400000/1048576
[   611.505] (==) Using default built-in configuration (30 lines)
[   611.505] (==) --- Start of built-in configuration ---
[   611.505]     Section "Device"
[   611.505]         Identifier    "Builtin Default intel Device 0"
[   611.505]         Driver    "intel"
[   611.505]     EndSection
[   611.505]     Section "Screen"
[   611.505]         Identifier    "Builtin Default intel Screen 0"
[   611.505]         Device    "Builtin Default intel Device 0"
[   611.505]     EndSection
[   611.505]     Section "Device"
[   611.505]         Identifier    "Builtin Default fbdev Device 0"
[   611.505]         Driver    "fbdev"
[   611.505]     EndSection
[   611.505]     Section "Screen"
[   611.505]         Identifier    "Builtin Default fbdev Screen 0"
[   611.505]         Device    "Builtin Default fbdev Device 0"
[   611.505]     EndSection
[   611.505]     Section "Device"
[   611.505]         Identifier    "Builtin Default vesa Device 0"
[   611.505]         Driver    "vesa"
[   611.505]     EndSection
[   611.505]     Section "Screen"
[   611.505]         Identifier    "Builtin Default vesa Screen 0"
[   611.505]         Device    "Builtin Default vesa Device 0"
[   611.505]     EndSection
[   611.505]     Section "ServerLayout"
[   611.505]         Identifier    "Builtin Default Layout"
[   611.505]         Screen    "Builtin Default intel Screen 0"
[   611.505]         Screen    "Builtin Default fbdev Screen 0"
[   611.505]         Screen    "Builtin Default vesa Screen 0"
[   611.505]     EndSection
[   611.505] (==) --- End of built-in configuration ---
[   611.505] (==) ServerLayout "Builtin Default Layout"
[   611.505] (**) |-->Screen "Builtin Default intel Screen 0" (0)
[   611.505] (**) |   |-->Monitor "<default monitor>"
[   611.505] (**) |   |-->Device "Builtin Default intel Device 0"
[   611.505] (==) No monitor specified for screen "Builtin Default intel Screen 0".
    Using a default monitor configuration.
[   611.505] (**) |-->Screen "Builtin Default fbdev Screen 0" (1)
[   611.505] (**) |   |-->Monitor "<default monitor>"
[   611.505] (**) |   |-->Device "Builtin Default fbdev Device 0"
[   611.505] (==) No monitor specified for screen "Builtin Default fbdev Screen 0".
    Using a default monitor configuration.
[   611.505] (**) |-->Screen "Builtin Default vesa Screen 0" (2)
[   611.505] (**) |   |-->Monitor "<default monitor>"
[   611.505] (**) |   |-->Device "Builtin Default vesa Device 0"
[   611.505] (==) No monitor specified for screen "Builtin Default vesa Screen 0".
    Using a default monitor configuration.
[   611.505] (==) Automatically adding devices
[   611.505] (==) Automatically enabling devices
[   611.505] (==) Not automatically adding GPU devices
[   611.505] (==) FontPath set to:
    /usr/local/share/fonts/misc/,
    /usr/local/share/fonts/TTF/,
    /usr/local/share/fonts/OTF/,
    /usr/local/share/fonts/Type1/,
    /usr/local/share/fonts/100dpi/,
    /usr/local/share/fonts/75dpi/
[   611.505] (==) ModulePath set to "/usr/local/lib/xorg/modules"
[   611.505] (II) The server relies on devd to provide the list of input devices.
    If no devices become available, reconfigure devd or disable AutoAddDevices.
[   611.505] (II) LoadModule: "glx"
[   611.506] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
[   611.507] (II) Module glx: vendor="X.Org Foundation"
[   611.507]     compiled for 1.17.4, module version = 1.0.0
[   611.507]     ABI class: X.Org Server Extension, version 9.0
[   611.507] (==) AIGLX enabled
[   611.507] (II) LoadModule: "intel"
[   611.507] (II) Loading /usr/local/lib/xorg/modules/drivers/intel_drv.so
[   611.507] (II) Module intel: vendor="X.Org Foundation"
[   611.507]     compiled for 1.17.4, module version = 2.21.15
[   611.507]     Module class: X.Org Video Driver
[   611.507]     ABI class: X.Org Video Driver, version 19.0
[   611.507] (II) LoadModule: "fbdev"
[   611.507] (II) Loading /usr/local/lib/xorg/modules/drivers/fbdev_drv.so
[   611.508] (II) Module fbdev: vendor="X.Org Foundation"
[   611.508]     compiled for 1.17.4, module version = 0.4.4
[   611.508]     Module class: X.Org Video Driver
[   611.508]     ABI class: X.Org Video Driver, version 19.0
[   611.508] (II) LoadModule: "vesa"
[   611.508] (II) Loading /usr/local/lib/xorg/modules/drivers/vesa_drv.so
[   611.508] (II) Module vesa: vendor="X.Org Foundation"
[   611.508]     compiled for 1.17.4, module version = 2.3.4
[   611.508]     Module class: X.Org Video Driver
[   611.508]     ABI class: X.Org Video Driver, version 19.0
[   611.508] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
    i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
    915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
    Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
    HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
    HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
    HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
    HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[   611.508] (II) FBDEV: driver for framebuffer: fbdev
[   611.508] (II) VESA: driver for VESA chipsets: vesa
[   611.508] (--) Using syscons driver with X support (version 2.0)
[   611.508] (--) using VT number 9

[   611.519] (WW) Falling back to old probe method for fbdev
[   611.519] (II) Loading sub module "fbdevhw"
[   611.519] (II) LoadModule: "fbdevhw"
[   611.519] (II) Loading /usr/local/lib/xorg/modules/libfbdevhw.so
[   611.559] (EE) LoadModule: Module fbdevhw does not have a fbdevhwModuleData data object.
[   611.559] (II) UnloadModule: "fbdevhw"
[   611.559] (II) Unloading fbdevhw
[   611.559] (EE) Failed to load module "fbdevhw" (invalid module, 0)
[   611.559] (WW) Falling back to old probe method for vesa
[   611.559] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[   611.559] (II) intel(0): Creating default Display subsection in Screen section
    "Builtin Default intel Screen 0" for depth/fbbpp 24/32
[   611.559] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[   611.559] (==) intel(0): RGB weight 888
[   611.559] (==) intel(0): Default visual is TrueColor
[   611.559] (--) intel(0): Integrated Graphics Chipset: Intel(R) GM45
[   611.559] (**) intel(0): Relaxed fencing enabled
[   611.559] (**) intel(0): Wait on SwapBuffers? enabled
[   611.559] (**) intel(0): Triple buffering? enabled
[   611.559] (**) intel(0): Framebuffer tiled
[   611.559] (**) intel(0): Pixmaps tiled
[   611.559] (**) intel(0): 3D buffers tiled
[   611.559] (**) intel(0): SwapBuffers wait enabled
[   611.559] (==) intel(0): video overlay key set to 0x101fe
[   611.560] (II) intel(0): Output LVDS1 has no monitor section
[   611.572] (II) intel(0): Output VGA1 has no monitor section
[   611.572] (II) intel(0): Output HDMI1 has no monitor section
[   611.572] (II) intel(0): Output DP1 has no monitor section
[   611.581] (II) intel(0): Output DP2 has no monitor section
[   611.716] (II) intel(0): Output TV1 has no monitor section
[   611.716] (II) intel(0): EDID for output LVDS1
[   611.716] (II) intel(0): Manufacturer: LPL  Model: 3d01  Serial#: 0
[   611.716] (II) intel(0): Year: 2008  Week: 0
[   611.716] (II) intel(0): EDID Version: 1.3
[   611.716] (II) intel(0): Digital Display Input
[   611.716] (II) intel(0): Max Image Size [cm]: horiz.: 33  vert.: 21
[   611.716] (II) intel(0): Gamma: 2.20
[   611.716] (II) intel(0): No DPMS capabilities specified
[   611.716] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[   611.716] (II) intel(0): First detailed timing is preferred mode
[   611.716] (II) intel(0): redX: 0.594 redY: 0.349   greenX: 0.325 greenY: 0.543
[   611.716] (II) intel(0): blueX: 0.157 blueY: 0.139   whiteX: 0.313 whiteY: 0.329
[   611.716] (II) intel(0): Manufacturer's mask: 0
[   611.716] (II) intel(0): Supported detailed timing:
[   611.716] (II) intel(0): clock: 69.3 MHz   Image Size:  331 x 207 mm
[   611.716] (II) intel(0): h_active: 1280  h_sync: 1328  h_sync_end 1352 h_blank_end 1416 h_border: 0
[   611.716] (II) intel(0): v_active: 800  v_sync: 803  v_sync_end 809 v_blanking: 816 v_border: 0
[   611.716] (II) intel(0):  LGPhilipsLCD
[   611.716] (II) intel(0): Monitor name: LP154WX4-TLAB
[   611.716] (II) intel(0): EDID (in hex):
[   611.716] (II) intel(0):     00ffffffffffff00320c013d00000000
[   611.716] (II) intel(0):     00120103802115780a14659859538b28
[   611.716] (II) intel(0):     23505400000001010101010101010101
[   611.716] (II) intel(0):     010101010101121b0088502010303018
[   611.716] (II) intel(0):     36004bcf100000190000000000000000
[   611.716] (II) intel(0):     00000000000000000000000000fe004c
[   611.716] (II) intel(0):     475068696c6970734c43440a000000fc
[   611.716] (II) intel(0):     004c503135345758342d544c41420023
[   611.716] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[   611.716] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   611.716] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   611.716] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[   611.716] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[   611.716] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[   611.716] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[   611.716] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[   611.716] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[   611.716] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[   611.716] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[   611.716] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[   611.716] (II) intel(0): Printing probed modes for output LVDS1
[   611.716] (II) intel(0): Modeline "1280x800"x60.0   69.30  1280 1328 1352 1416  800 803 809 816 -hsync -vsync (48.9 kHz eP)
[   611.716] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[   611.716] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[   611.716] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[   611.716] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[   611.728] (II) intel(0): EDID for output VGA1
[   611.728] (II) intel(0): EDID for output HDMI1
[   611.728] (II) intel(0): EDID for output DP1
[   611.737] (II) intel(0): EDID for output DP2
[   611.872] (II) intel(0): EDID for output TV1
[   611.872] (II) intel(0): Output LVDS1 connected
[   611.872] (II) intel(0): Output VGA1 disconnected
[   611.872] (II) intel(0): Output HDMI1 disconnected
[   611.872] (II) intel(0): Output DP1 disconnected
[   611.872] (II) intel(0): Output DP2 disconnected
[   611.872] (II) intel(0): Output TV1 disconnected
[   611.872] (II) intel(0): Using exact sizes for initial modes
[   611.872] (II) intel(0): Output LVDS1 using initial mode 1280x800
[   611.872] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[   611.872] (II) intel(0): Kernel page flipping support detected, enabling
[   611.872] (==) intel(0): DPI set to (96, 96)
[   611.872] (II) Loading sub module "fb"
[   611.872] (II) LoadModule: "fb"
[   611.872] (II) Loading /usr/local/lib/xorg/modules/libfb.so
[   611.872] (II) Module fb: vendor="X.Org Foundation"
[   611.872]     compiled for 1.17.4, module version = 1.0.0
[   611.872]     ABI class: X.Org ANSI C Emulation, version 0.4
[   611.872] (II) Loading sub module "dri2"
[   611.872] (II) LoadModule: "dri2"
[   611.872] (II) Module "dri2" already built-in
[   611.872] (II) UnloadModule: "fbdev"
[   611.872] (II) Unloading fbdev
[   611.873] (II) UnloadModule: "vesa"
[   611.873] (II) Unloading vesa
[   611.873] (==) Depth 24 pixmap format is 32 bpp
[   611.873] (II) intel(0): [DRI2] Setup complete
[   611.873] (II) intel(0): [DRI2]   DRI driver: i965
[   611.873] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled
[   611.883] (II) UXA(0): Driver registered support for the following operations:
[   611.883] (II)         solid
[   611.883] (II)         copy
[   611.883] (II)         composite (RENDER acceleration)
[   611.883] (II)         put_image
[   611.883] (II)         get_image
[   611.883] (==) intel(0): Backing store enabled
[   611.883] (==) intel(0): Silken mouse enabled
[   611.883] (II) intel(0): Initializing HW Cursor
[   611.883] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   611.883] (==) intel(0): DPMS enabled
[   611.883] (==) intel(0): Intel XvMC decoder enabled
[   611.883] (II) intel(0): Set up textured video
[   611.883] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[   611.883] (II) intel(0): direct rendering: DRI2 Enabled
[   611.896] (--) RandR disabled
[   611.906] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   611.906] (II) AIGLX: enabled GLX_ARB_create_context
[   611.906] (II) AIGLX: enabled GLX_ARB_create_context_profile
[   611.906] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[   611.906] (II) AIGLX: enabled GLX_INTEL_swap_event
[   611.906] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[   611.906] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[   611.906] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[   611.906] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[   611.906] (II) AIGLX: Loaded and initialized i965
[   611.906] (II) GLX: Initialized DRI2 GL provider for screen 0
[   611.907] (II) intel(0): Setting screen physical size to 338 x 211
[   612.028] (II) config/devd: probing input devices...
[   612.028] (II) config/devd: adding input device (null) (/dev/kbdmux)
[   612.028] (II) LoadModule: "kbd"
[   612.029] (II) Loading /usr/local/lib/xorg/modules/input/kbd_drv.so
[   612.029] (II) Module kbd: vendor="X.Org Foundation"
[   612.029]     compiled for 1.17.4, module version = 1.8.1
[   612.029]     Module class: X.Org XInput Driver
[   612.029]     ABI class: X.Org XInput driver, version 21.0
[   612.029] (II) Using input driver 'kbd' for 'kbdmux'
[   612.029] (**) kbdmux: always reports core events
[   612.029] (**) kbdmux: always reports core events
[   612.029] (**) Option "Protocol" "standard"
[   612.029] (**) Option "XkbRules" "base"
[   612.029] (**) Option "XkbModel" "pc105"
[   612.029] (**) Option "XkbLayout" "us"
[   612.029] (**) Option "config_info" "devd:kbdmux"
[   612.029] (II) XINPUT: Adding extended input device "kbdmux" (type: KEYBOARD, id 6)
[   612.045] (II) config/devd: kbdmux is enabled, ignoring device atkbd0
[   612.045] (II) config/devd: adding input device (null) (/dev/sysmouse)
[   612.045] (II) LoadModule: "mouse"
[   612.045] (II) Loading /usr/local/lib/xorg/modules/input/mouse_drv.so
[   612.046] (II) Module mouse: vendor="X.Org Foundation"
[   612.046]     compiled for 1.17.4, module version = 1.9.1
[   612.046]     Module class: X.Org XInput Driver
[   612.046]     ABI class: X.Org XInput driver, version 21.0
[   612.046] (II) Using input driver 'mouse' for 'sysmouse'
[   612.046] (**) sysmouse: always reports core events
[   612.046] (**) Option "Device" "/dev/sysmouse"
[   612.046] (==) sysmouse: Protocol: "Auto"
[   612.046] (**) sysmouse: always reports core events
[   612.046] (==) sysmouse: Emulate3Buttons, Emulate3Timeout: 50
[   612.046] (**) sysmouse: ZAxisMapping: buttons 4 and 5
[   612.046] (**) sysmouse: Buttons: 5
[   612.046] (**) Option "config_info" "devd:sysmouse"
[   612.046] (II) XINPUT: Adding extended input device "sysmouse" (type: MOUSE, id 7)
[   612.046] (**) sysmouse: (accel) keeping acceleration scheme 1
[   612.046] (**) sysmouse: (accel) acceleration profile 0
[   612.046] (**) sysmouse: (accel) acceleration factor: 2.000
[   612.046] (**) sysmouse: (accel) acceleration threshold: 4
[   612.046] (II) sysmouse: SetupAuto: hw.iftype is 4, hw.model is 0
[   612.046] (II) sysmouse: SetupAuto: protocol is SysMouse
[   612.102] (II) config/devd: adding input device Mouse (/dev/psm0)
[   612.102] (II) Using input driver 'mouse' for 'Mouse'
[   612.102] (**) Mouse: always reports core events
[   612.102] (**) Option "Device" "/dev/psm0"
[   612.102] (==) Mouse: Protocol: "Auto"
[   612.102] (**) Mouse: always reports core events
[   612.158] (==) Mouse: Emulate3Buttons, Emulate3Timeout: 50
[   612.158] (**) Mouse: ZAxisMapping: buttons 4 and 5
[   612.158] (**) Mouse: Buttons: 5
[   612.158] (**) Option "config_info" "devd:psm0"
[   612.158] (II) XINPUT: Adding extended input device "Mouse" (type: MOUSE, id 8)
[   612.158] (**) Mouse: (accel) keeping acceleration scheme 1
[   612.158] (**) Mouse: (accel) acceleration profile 0
[   612.158] (**) Mouse: (accel) acceleration factor: 2.000
[   612.158] (**) Mouse: (accel) acceleration threshold: 4
[   612.176] (II) Mouse: SetupAuto: hw.iftype is 3, hw.model is 0
[   612.176] (II) Mouse: SetupAuto: protocol is PS/2
[   612.621] (II) Mouse: ps2EnableDataReporting: succeeded
[   613.932] (II) config/devd: terminating backend...
[   613.932] (II) UnloadModule: "mouse"
[   613.932] (II) UnloadModule: "mouse"
[   613.932] (II) UnloadModule: "kbd"
[   614.157] (II) Server terminated successfully (0). Closing log file.
 
Zurück
Oben