XFree86 mit Geforce2Go?

P

PhilLies

Member
Hi!
Ich bin grad am verzweifeln. Ich hab nen Dell Inspiron 8000 mit ner GeForce2 Go und will bzw. hab da ein OpenBSD laufen. Naja, eigentlich ja kein Problem, nur find ich ne grafische Oberfläche zum Programmieren hat halt schon so seine Vorteile, also mal XFree86 4.3.0 vom OpenBSD Server gezogen und installiert, machte auch keine Probleme, nur mag er meine GraKa nicht.
Wenn ich den NVIDIA GeForce (nv) Treiber nehme, bekomm ich gar kein brauchbares Bild, mit dem Generic VESA Treiber kann ich wenigstens auf 640x480 mit 8bit arbeiten. Doch das ist leider kein Zustand, ich würde schon gerne die vollen 1600x1200 nutzen.
Doch ich hab gegoogelt was das Zeug hält, doch nix zu finden, was hilft. Die FreeBSD Treiber von NVIDIA bekomm ich nicht kompiliert und bei den Linux Treibern meldet er mir, ich hab ja OpenBSD und kein Linux, also auch kein Erfolg.
Hat jemand ne Idee, was ich noch machen kann oder ob/wie ich die FreeBSD Treiber zum laufen bekommen könnte?
 
Original geschrieben von PhilLies
XFree86 4.3.0 vom OpenBSD Server gezogen und installiert, machte auch keine Probleme, nur mag er meine GraKa nicht.
Zum Vergrößern anklicken....

Wie wäre es mit ein paar logs oder sonstigen Infos. Solche Bezeichnungen wie "nicht mögen" usw. haben hier nichts zu suchen, wenn sie nicht mit Logs belegt sind.

Das gehört doch zum Standardrepertoire
Wenn ich den NVIDIA GeForce (nv) Treiber nehme, bekomm ich gar kein brauchbares Bild, mit dem Generic VESA Treiber kann ich wenigstens auf 640x480 mit 8bit arbeiten. Doch das ist leider kein Zustand, ich würde schon gerne die vollen 1600x1200 nutzen.
Zum Vergrößern anklicken....

Hast du auch die passede Freuquenzrate gewählt?

Flachbildschirme & TFTs müssen auf 60 Hertz laufen.

CW
 
Nur so zur Aufmunterung: Ich habe einen Dell Inspiron 8200 und habe den, bevor der NVidia Treiber herauskam, mit dem normalen "nv" Treiber von XFree mit 1600x1200 betrieben. Vielleicht postet Du mal, wie CW vorschlägt, das log file (/var/log/XFree?.log).
 
Hi!
Sorry wegen der späten Antwort, hier das XFree logfile:

Code: 
(--) checkDevMem: using aperture driver /dev/xf86
(--) Using wscons driver in pcvt compatibility mode (version 3.32)
(WW) xf86AcquireGART: AGPIOC_ACQUIRE failed (Device busy)
(WW) GARTInit: AGPIOC_INFO failed (Device not configured)

XFree86 Version 4.2.1 (for OpenBSD) / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 3 September 2002
	If the server is older than 6-12 months, or if your card is
	newer than the above date, look for a newer version before
	reporting problems.  (See [url]http://www.XFree86.Org/[/url])
Build Operating System: OpenBSD 3.3 i386 
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Wed Sep 17 23:59:45 2003
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) |   |-->Monitor "My Monitor"
(**) |   |-->Device "NVIDIA GeForce"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc101"
(**) XKB: model: "pc101"
(**) Option "XkbLayout" "de"
(**) XKB: layout: "de"
(**) Option "XkbVariant" "nodeadkeys"
(**) XKB: variant: "nodeadkeys"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(II) Module ABI versions:
	XFree86 ANSI C Emulation: 0.1
	XFree86 Video Driver: 0.5
	XFree86 XInput driver : 0.3
	XFree86 Server Extension : 0.1
	XFree86 Font Renderer : 0.3
(II) Loader running on openbsd
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
	compiled for 4.2.1, module version = 1.0.0
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
	compiled for 4.2.1, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.5
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,1130 card 0000,0000 rev 02 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,1131 card 0000,0000 rev 02 class 06,04,00 hdr 01
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev 02 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,244c card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,244a card 8086,4541 rev 02 class 01,01,80 hdr 00
(II) PCI: 00:1f:2: chip 8086,2442 card 8086,4541 rev 02 class 0c,03,00 hdr 00
(II) PCI: 01:00:0: chip 10de,0112 card 1028,00a4 rev b2 class 03,00,00 hdr 00
(II) PCI: 02:03:0: chip 125d,1998 card 1028,00a4 rev 10 class 04,01,00 hdr 00
(II) PCI: 02:06:0: chip 1668,0100 card 0000,0000 rev 11 class 06,04,00 hdr 01
(II) PCI: 02:0f:0: chip 104c,ac42 card fffc,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 02:0f:1: chip 104c,ac42 card fffc,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 02:0f:2: chip 104c,8027 card 1028,00a4 rev 00 class 0c,00,10 hdr 80
(II) PCI: 03:04:0: chip 8086,1229 card 1668,1100 rev 08 class 02,00,00 hdr 00
(II) PCI: 03:08:0: chip 11c1,0448 card 1668,2400 rev 01 class 07,80,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
	compiled for 4.2.1, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.5
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) PCI-to-PCI bridge:
(II) PCI-to-PCI bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0c (VGA_EN is set)
(II) Bus 1 I/O range:
	[0] -1	0x0000c000 - 0x0000c0ff (0x100) IX[B]
	[1] -1	0x0000c400 - 0x0000c4ff (0x100) IX[B]
	[2] -1	0x0000c800 - 0x0000c8ff (0x100) IX[B]
	[3] -1	0x0000cc00 - 0x0000ccff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
	[0] -1	0xfc000000 - 0xfdffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
	[0] -1	0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
(II) Bus 2: bridge is at (0:30:0), (0,2,5), BCTRL: 0x06 (VGA_EN is cleared)
(II) Bus 2 I/O range:
	[0] -1	0x0000d000 - 0x0000d0ff (0x100) IX[B]
	[1] -1	0x0000d400 - 0x0000d4ff (0x100) IX[B]
	[2] -1	0x0000d800 - 0x0000d8ff (0x100) IX[B]
	[3] -1	0x0000dc00 - 0x0000dcff (0x100) IX[B]
	[4] -1	0x0000e000 - 0x0000e0ff (0x100) IX[B]
	[5] -1	0x0000e400 - 0x0000e4ff (0x100) IX[B]
	[6] -1	0x0000e800 - 0x0000e8ff (0x100) IX[B]
	[7] -1	0x0000ec00 - 0x0000ecff (0x100) IX[B]
	[8] -1	0x0000f000 - 0x0000f0ff (0x100) IX[B]
	[9] -1	0x0000f400 - 0x0000f4ff (0x100) IX[B]
	[10] -1	0x0000f800 - 0x0000f8ff (0x100) IX[B]
	[11] -1	0x0000fc00 - 0x0000fcff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
	[0] -1	0xf2000000 - 0xfbffffff (0xa000000) MX[B]
(II) Bus 2 prefetchable memory range:
(II) Bus -1: bridge is at (0:31:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(II) Bus 3: bridge is at (2:6:0), (2,3,3), BCTRL: 0x06 (VGA_EN is cleared)
(II) Bus 3 I/O range:
	[0] -1	0x0000e000 - 0x0000e0ff (0x100) IX[B]
	[1] -1	0x0000e400 - 0x0000e4ff (0x100) IX[B]
	[2] -1	0x0000e800 - 0x0000e8ff (0x100) IX[B]
	[3] -1	0x0000ec00 - 0x0000ecff (0x100) IX[B]
(II) Bus 3 non-prefetchable memory range:
	[0] -1	0xf8000000 - 0xf9ffffff (0x2000000) MX[B]
(II) Bus 3 prefetchable memory range:
(--) PCI:*(1:0:0) NVidia GeForce2 Go rev 178, Mem @ 0xfc000000/24, 0xe0000000/27
(II) Addressable bus resource ranges are
	[0] -1	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
	[0] -1	0xf8ffec00 - 0xf8ffefff (0x400) MX[B]E
	[1] -1	0xf8e00000 - 0xf8ffffff (0x200000) MX[B]E
	[2] -1	0xf8fff000 - 0xf8ffffff (0x1000) MX[B]E
	[3] -1	0xf6ff8000 - 0xf6ffffff (0x8000) MX[B]E
	[4] -1	0xf6ffd800 - 0xf6ffdfff (0x800) MX[B]E
	[5] -1	0xf6ffe000 - 0xf6ffffff (0x2000) MX[B]E
	[6] -1	0xe8000000 - 0xefffffff (0x8000000) MX[B]E
	[7] -1	0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
	[8] -1	0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
	[9] -1	0x0000e800 - 0x0000e8ff (0x100) IX[B]E
	[10] -1	0x0000ecb8 - 0x0000ecbf (0x8) IX[B]E
	[11] -1	0x0000ecc0 - 0x0000ecff (0x40) IX[B]E
	[12] -1	0x0000dc00 - 0x0000dcff (0x100) IX[B]E
	[13] -1	0x0000bce0 - 0x0000bcff (0x20) IX[B]E
	[14] -1	0x0000bfa0 - 0x0000bfbf (0x20) IX[B]E
(II) PCI Memory resource overlap reduced 0xf8e00000 from 0xf8ffffff to 0xf8efffff
(II) PCI Memory resource overlap reduced 0xf6ff8000 from 0xf6ffffff to 0xf6ffbfff
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0xf8ffec00 - 0xf8ffefff (0x400) MX[B]E
	[1] -1	0xf8e00000 - 0xf8efffff (0x100000) MX[B]E
	[2] -1	0xf8fff000 - 0xf8ffffff (0x1000) MX[B]E
	[3] -1	0xf6ff8000 - 0xf6ffbfff (0x4000) MX[B]E
	[4] -1	0xf6ffd800 - 0xf6ffdfff (0x800) MX[B]E
	[5] -1	0xf6ffe000 - 0xf6ffffff (0x2000) MX[B]E
	[6] -1	0xe8000000 - 0xefffffff (0x8000000) MX[B]E
	[7] -1	0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
	[8] -1	0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
	[9] -1	0x0000e800 - 0x0000e8ff (0x100) IX[B]E
	[10] -1	0x0000ecb8 - 0x0000ecbf (0x8) IX[B]E
	[11] -1	0x0000ecc0 - 0x0000ecff (0x40) IX[B]E
	[12] -1	0x0000dc00 - 0x0000dcff (0x100) IX[B]E
	[13] -1	0x0000bce0 - 0x0000bcff (0x20) IX[B]E
	[14] -1	0x0000bfa0 - 0x0000bfbf (0x20) IX[B]E
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
	[0] -1	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0xf8ffec00 - 0xf8ffefff (0x400) MX[B]E
	[6] -1	0xf8e00000 - 0xf8efffff (0x100000) MX[B]E
	[7] -1	0xf8fff000 - 0xf8ffffff (0x1000) MX[B]E
	[8] -1	0xf6ff8000 - 0xf6ffbfff (0x4000) MX[B]E
	[9] -1	0xf6ffd800 - 0xf6ffdfff (0x800) MX[B]E
	[10] -1	0xf6ffe000 - 0xf6ffffff (0x2000) MX[B]E
	[11] -1	0xe8000000 - 0xefffffff (0x8000000) MX[B]E
	[12] -1	0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
	[13] -1	0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
	[14] -1	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[15] -1	0x00000000 - 0x000000ff (0x100) IX[B]
	[16] -1	0x0000e800 - 0x0000e8ff (0x100) IX[B]E
	[17] -1	0x0000ecb8 - 0x0000ecbf (0x8) IX[B]E
	[18] -1	0x0000ecc0 - 0x0000ecff (0x40) IX[B]E
	[19] -1	0x0000dc00 - 0x0000dcff (0x100) IX[B]E
	[20] -1	0x0000bce0 - 0x0000bcff (0x20) IX[B]E
	[21] -1	0x0000bfa0 - 0x0000bfbf (0x20) IX[B]E
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
	compiled for 4.2.1, module version = 1.0.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
	compiled for 4.2.1, module version = 1.0.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
	compiled for 4.2.1, module version = 1.0.1
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
	compiled for 4.2.1, module version = 1.1.10
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font FreeType
(II) LoadModule: "nv"
(II) Loading /usr/X11R6/lib/modules/drivers/nv_drv.o
(II) Module nv: vendor="The XFree86 Project"
	compiled for 4.2.1, module version = 1.0.1
	Module class: XFree86 Video Driver
	ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
	compiled for 4.2.1, module version = 1.0.0
	Module class: XFree86 XInput Driver
	ABI class: XFree86 XInput driver, version 0.3
(II) NV: driver for NVIDIA chipsets: RIVA128, RIVA TNT, RIVA TNT2,
	RIVA TNT2 Ultra, Vanta, RIVA TNT2 M64, Aladdin TNT2, GeForce 256,
	GeForce DDR, Quadro, GeForce2 GTS/Pro, GeForce2 Ti, GeForce2 Ultra,
	Quadro2 Pro, GeForce2 MX/MX 400, GeForce2 MX 100/200, 0x0170, 0x0171,
	0x0172, 0x0173, 0x0174, 0x0175, 0x0178, 0x017A, 0x017B, 0x017C,
	GeForce2 Integrated, Quadro2 MXR, GeForce2 Go, GeForce3,
	GeForce3 Ti 200, GeForce3 Ti 500, Quadro DDC, 0x0250, 0x0258
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset GeForce2 Go found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0xf8ffec00 - 0xf8ffefff (0x400) MX[B]E
	[6] -1	0xf8e00000 - 0xf8efffff (0x100000) MX[B]E
	[7] -1	0xf8fff000 - 0xf8ffffff (0x1000) MX[B]E
	[8] -1	0xf6ff8000 - 0xf6ffbfff (0x4000) MX[B]E
	[9] -1	0xf6ffd800 - 0xf6ffdfff (0x800) MX[B]E
	[10] -1	0xf6ffe000 - 0xf6ffffff (0x2000) MX[B]E
	[11] -1	0xe8000000 - 0xefffffff (0x8000000) MX[B]E
	[12] -1	0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
	[13] -1	0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
	[14] -1	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[15] -1	0x00000000 - 0x000000ff (0x100) IX[B]
	[16] -1	0x0000e800 - 0x0000e8ff (0x100) IX[B]E
	[17] -1	0x0000ecb8 - 0x0000ecbf (0x8) IX[B]E
	[18] -1	0x0000ecc0 - 0x0000ecff (0x40) IX[B]E
	[19] -1	0x0000dc00 - 0x0000dcff (0x100) IX[B]E
	[20] -1	0x0000bce0 - 0x0000bcff (0x20) IX[B]E
	[21] -1	0x0000bfa0 - 0x0000bfbf (0x20) IX[B]E
(II) resource ranges after probing:
	[0] -1	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0xf8ffec00 - 0xf8ffefff (0x400) MX[B]E
	[6] -1	0xf8e00000 - 0xf8efffff (0x100000) MX[B]E
	[7] -1	0xf8fff000 - 0xf8ffffff (0x1000) MX[B]E
	[8] -1	0xf6ff8000 - 0xf6ffbfff (0x4000) MX[B]E
	[9] -1	0xf6ffd800 - 0xf6ffdfff (0x800) MX[B]E
	[10] -1	0xf6ffe000 - 0xf6ffffff (0x2000) MX[B]E
	[11] -1	0xe8000000 - 0xefffffff (0x8000000) MX[B]E
	[12] -1	0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
	[13] -1	0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
	[14] 0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[15] 0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[16] 0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[17] -1	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[18] -1	0x00000000 - 0x000000ff (0x100) IX[B]
	[19] -1	0x0000e800 - 0x0000e8ff (0x100) IX[B]E
	[20] -1	0x0000ecb8 - 0x0000ecbf (0x8) IX[B]E
	[21] -1	0x0000ecc0 - 0x0000ecff (0x40) IX[B]E
	[22] -1	0x0000dc00 - 0x0000dcff (0x100) IX[B]E
	[23] -1	0x0000bce0 - 0x0000bcff (0x20) IX[B]E
	[24] -1	0x0000bfa0 - 0x0000bfbf (0x20) IX[B]E
	[25] 0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[26] 0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/libint10.a
(II) Module int10: vendor="The XFree86 Project"
	compiled for 4.2.1, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.5
(II) NV(0): Initializing int10
(==) NV(0): Write-combining range (0xa0000,0x20000) was already clear
(==) NV(0): Write-combining range (0xf0000,0x10000)
(II) NV(0): Primary V_BIOS segment is: 0xc000
(--) NV(0): Chipset: "GeForce2 Go"
(**) NV(0): Depth 16, (--) framebuffer bpp 16
(==) NV(0): RGB weight 565
(==) NV(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
	compiled for 4.2.1, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.5
(==) NV(0): Using HW cursor
(--) NV(0): Linear framebuffer at 0xE0000000
(--) NV(0): MMIO registers at 0xFC000000
(==) NV(0): Write-combining range (0xfc710000,0x10000) was already clear
(==) NV(0): Write-combining range (0xfc600000,0x1000) was already clear
(==) NV(0): Write-combining range (0xfc680000,0x3000) was already clear
(==) NV(0): Write-combining range (0xfc100000,0x1000) was already clear
(==) NV(0): Write-combining range (0xfc002000,0x2000) was already clear
(==) NV(0): Write-combining range (0xfc400000,0x2000) was already clear
(==) NV(0): Write-combining range (0xfc101000,0x1000) was already clear
(==) NV(0): Write-combining range (0xfc009000,0x1000) was already clear
(==) NV(0): Write-combining range (0xfc000000,0x9000) was already clear
(==) NV(0): Write-combining range (0xfc800000,0x10000) was already clear
(==) NV(0): Write-combining range (0xfc601000,0x1000) was already clear
(==) NV(0): Write-combining range (0xfc681000,0x1000) was already clear
(==) NV(0): Write-combining range (0xfc0c0000,0x1000) was already clear
(--) NV(0): VideoRAM: 32768 kBytes
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
	compiled for 4.2.1, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.5
(==) NV(0): Write-combining range (0xa0000,0x10000) was already clear
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
	compiled for 4.2.1, module version = 1.2.0
	ABI class: XFree86 Video Driver, version 0.5
(II) NV(0): I2C bus "DDC" initialized.
(II) NV(0): I2C device "DDC:ddc2" registered.
(II) NV(0): I2C device "DDC:ddc2" removed.
(==) NV(0): Write-combining range (0xa0000,0x10000) was already clear
(==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
(II) NV(0): My Monitor: Using hsync range of 31.50-90.00 kHz
(II) NV(0): My Monitor: Using vrefresh value of 60.00 Hz
(II) NV(0): Clock range:  12.00 to 350.00 MHz
(II) NV(0): Not using default mode "640x350" (vrefresh out of range)
(II) NV(0): Not using default mode "320x175" (vrefresh out of range)
(II) NV(0): Not using default mode "640x400" (vrefresh out of range)
(II) NV(0): Not using default mode "320x200" (vrefresh out of range)
(II) NV(0): Not using default mode "720x400" (vrefresh out of range)
(II) NV(0): Not using default mode "360x200" (vrefresh out of range)
(II) NV(0): Not using default mode "640x480" (vrefresh out of range)
(II) NV(0): Not using default mode "320x240" (vrefresh out of range)
(II) NV(0): Not using default mode "640x480" (vrefresh out of range)
(II) NV(0): Not using default mode "320x240" (vrefresh out of range)
(II) NV(0): Not using default mode "640x480" (vrefresh out of range)
(II) NV(0): Not using default mode "320x240" (vrefresh out of range)
(II) NV(0): Not using default mode "800x600" (vrefresh out of range)
(II) NV(0): Not using default mode "400x300" (vrefresh out of range)
(II) NV(0): Not using default mode "800x600" (vrefresh out of range)
(II) NV(0): Not using default mode "400x300" (vrefresh out of range)
(II) NV(0): Not using default mode "800x600" (vrefresh out of range)
(II) NV(0): Not using default mode "400x300" (vrefresh out of range)
(II) NV(0): Not using default mode "800x600" (vrefresh out of range)
(II) NV(0): Not using default mode "400x300" (vrefresh out of range)
(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1024x768" (vrefresh out of range)
(II) NV(0): Not using default mode "512x384" (vrefresh out of range)
(II) NV(0): Not using default mode "1024x768" (vrefresh out of range)
(II) NV(0): Not using default mode "512x384" (vrefresh out of range)
(II) NV(0): Not using default mode "1024x768" (vrefresh out of range)
(II) NV(0): Not using default mode "512x384" (vrefresh out of range)
(II) NV(0): Not using default mode "1152x864" (vrefresh out of range)
(II) NV(0): Not using default mode "576x432" (vrefresh out of range)
(II) NV(0): Not using default mode "1280x960" (vrefresh out of range)
(II) NV(0): Not using default mode "640x480" (vrefresh out of range)
(II) NV(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) NV(0): Not using default mode "640x512" (vrefresh out of range)
(II) NV(0): Not using default mode "1280x1024" (hsync out of range)
(II) NV(0): Not using default mode "640x512" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) NV(0): Not using default mode "800x600" (vrefresh out of range)
(II) NV(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) NV(0): Not using default mode "800x600" (vrefresh out of range)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1792x1344" (hsync out of range)
(II) NV(0): Not using default mode "896x672" (hsync out of range)
(II) NV(0): Not using default mode "1856x1392" (hsync out of range)
(II) NV(0): Not using default mode "928x696" (hsync out of range)
(II) NV(0): Not using default mode "1920x1440" (hsync out of range)
(II) NV(0): Not using default mode "960x720" (hsync out of range)
(II) NV(0): Not using default mode "832x624" (vrefresh out of range)
(II) NV(0): Not using default mode "416x312" (vrefresh out of range)
(II) NV(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) NV(0): Not using default mode "700x525" (vrefresh out of range)
(--) NV(0): Virtual size is 1280x1024 (pitch 1280)
(**) NV(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) NV(0): Modeline "640x480"   25.20  640 656 752 800  480 490 492 525 -hsync -vsync
(**) NV(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) NV(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync
(**) NV(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) NV(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync
(**) NV(0): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) NV(0): Modeline "1280x1024"  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync
(==) NV(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
	compiled for 4.2.1, module version = 1.0.0
	ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
	compiled for 4.2.1, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
	compiled for 4.2.1, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.5
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
	[1] 0	0xfc000000 - 0xfcffffff (0x1000000) MX[B]
	[2] -1	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[3] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[4] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[5] -1	0x000c0000 - 0x000effff (0x30000) MX[B]
	[6] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[7] -1	0xf8ffec00 - 0xf8ffefff (0x400) MX[B]E
	[8] -1	0xf8e00000 - 0xf8efffff (0x100000) MX[B]E
	[9] -1	0xf8fff000 - 0xf8ffffff (0x1000) MX[B]E
	[10] -1	0xf6ff8000 - 0xf6ffbfff (0x4000) MX[B]E
	[11] -1	0xf6ffd800 - 0xf6ffdfff (0x800) MX[B]E
	[12] -1	0xf6ffe000 - 0xf6ffffff (0x2000) MX[B]E
	[13] -1	0xe8000000 - 0xefffffff (0x8000000) MX[B]E
	[14] -1	0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
	[15] -1	0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
	[16] 0	0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
	[17] 0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
	[18] 0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
	[19] -1	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[20] -1	0x00000000 - 0x000000ff (0x100) IX[B]
	[21] -1	0x0000e800 - 0x0000e8ff (0x100) IX[B]E
	[22] -1	0x0000ecb8 - 0x0000ecbf (0x8) IX[B]E
	[23] -1	0x0000ecc0 - 0x0000ecff (0x40) IX[B]E
	[24] -1	0x0000dc00 - 0x0000dcff (0x100) IX[B]E
	[25] -1	0x0000bce0 - 0x0000bcff (0x20) IX[B]E
	[26] -1	0x0000bfa0 - 0x0000bfbf (0x20) IX[B]E
	[27] 0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
	[28] 0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) NV(0): Write-combining range (0xfc000000,0x1000000) was already clear
(==) NV(0): Write-combining range (0xe0000000,0x2000000)
(==) NV(0): Write-combining range (0xa0000,0x10000) was already clear
(II) NV(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Indirect CPU to Screen color expansion
	Solid Lines
	Offscreen Pixmaps
	Setting up tile and stipple cache:
		32 128x128 slots
		32 256x256 slots
		16 512x512 slots
(==) NV(0): Backing store disabled
(==) NV(0): Silken mouse enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(**) Option "Protocol" "wsmouse"
(**) Mouse1: Protocol: wsmouse
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/wsmouse"
(==) Mouse1: Buttons: 3
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing from list!

Und hier die XF86Config:
Code: 
Section "Module"

    Load        "dbe"   # Double buffer extension

    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

    Load        "type1"
    Load        "freetype"

EndSection


Section "Files"

    RgbPath     "/usr/X11R6/lib/X11/rgb"

    FontPath   "/usr/X11R6/lib/X11/fonts/local/"
    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"

EndSection


Section "ServerFlags"

EndSection


Section "InputDevice"

    Identifier  "Keyboard1"
    Driver      "Keyboard"

    Option "AutoRepeat" "500 30"

    Option "XkbRules"   "xfree86"
    Option "XkbModel"   "pc101"
    Option "XkbLayout"  "de"
    Option "XkbVariant" "nodeadkeys"

EndSection


Section "InputDevice"

    Identifier  "Mouse1"
    Driver      "mouse"
    Option "Protocol"    "wsmouse"
    Option "Device"      "/dev/wsmouse"

EndSection


Section "Monitor"

    Identifier  "My Monitor"
    HorizSync   31.5-90
    VertRefresh 58-75

EndSection

Section "Device"
    Identifier  "Standard VGA"
    VendorName  "Unknown"
    BoardName   "Unknown"
    Driver     "vga"

EndSection

Section "Device"
    Identifier  "NVIDIA GeForce"
    Driver      "nv"
    #VideoRam    32768
    # Insert Clocks lines here if appropriate
EndSection


Section "Screen"
    Identifier  "Screen 1"
    Device      "NVIDIA GeForce"
    Monitor     "My Monitor"
    DefaultDepth 16

    Subsection "Display"
        Depth       8
        Modes       "640x480" "800x600" "1024x768" "1280x1024"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "640x480" "800x600" "1024x768" "1280x1024"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "640x480" "800x600" "1024x768" "1280x1024"
        ViewPort    0 0
    EndSubsection
EndSection

Section "ServerLayout"

    Identifier  "Simple Layout"

    Screen "Screen 1"

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

Dabei fällt mir auf, dass ich anscheinend die falsche Version von XFree86 gezogen hab, ich dachte es sei die 4.3.0, aber ist nur die 4.2.1.
Ich glaub das lag daran, dass ich die XFree86 für OpenBSD 3.2 auf meinem 3.3 nicht installiert bekommen hab. Beim ausführen von Xinstall.sh kam immer die Fehlermeldung "Bad extract.exe, renamed to extract.exe.bad".
Hoffe ihr könnt mir trotzdem helfen.
Thx
 
Original geschrieben von PhilLies



Dabei fällt mir auf, dass ich anscheinend die falsche Version von XFree86 gezogen hab, ich dachte es sei die 4.3.0, aber ist nur die 4.2.1.
Zum Vergrößern anklicken....

Das hängt davon ab, in welchem Verzeichnis du dich auf ftp.openbsd.org befunden hast.

Du muss in das jeweilige Verzeichnis gehen und die Tarballs holen.

Ich glaub das lag daran, dass ich die XFree86 für OpenBSD 3.2 auf meinem 3.3 nicht installiert bekommen hab.
Zum Vergrößern anklicken....

Das sollst du auch nicht!

Was hat der 3.2-er Xfree mit 3.3 Xfree zu tun?

Wenn es ginge, dann gäbe es ein Verzeichnis auf dem FTP-Server mit den Binaries die für alle Versionen passen.

Also schleunigst die richtigen Versionen installieren.

Beim ausführen von Xinstall.sh kam immer die Fehlermeldung "Bad extract.exe, renamed to extract.exe.bad".
Hoffe ihr könnt mir trotzdem helfen.
Zum Vergrößern anklicken....

Installiere die richtigen Tarballs.

ftp://ftp.openbsd.org/pub/OpenBSD/3.3/i386

Und dort holst du dir die X-Tarballs.

CW
 
Hi!
Installiert hab ich nur die Packages vom openbsd ftp (bzw. vom tiscali Mirror in Frankfurt) und mein derzeit laufender XFree86 ist aus dem XF4.tar.gz von ftp://ftp.openbsd.org/pub/OpenBSD/3.3/ erstellt (aber halt nur 4.2.1 nicht 4.3.0 wie ich dachte). Ist also der richtige bzw aktuellste XFree86 für mein 3.3 drauf.
Mich würd aber interessieren, ob bzw. was ich an meiner XF86Config anpassen kann/muss, damit ich ein brauchbares Bild auf meiner GeForce2 Go bekomm. Im Moment hab ich nur blinkenden Pixelsalat.

Phil
 
Original geschrieben von PhilLies
Ist also der richtige bzw aktuellste XFree86 für mein 3.3 drauf.
Zum Vergrößern anklicken....

Du hast geschrieben, dass du Xfree von 3.2-Version geholt hast und das hat mich stutzig gemacht,

Mich würd aber interessieren, ob bzw. was ich an meiner XF86Config anpassen kann/muss, damit ich ein brauchbares Bild auf meiner GeForce2 Go bekomm. Im Moment hab ich nur blinkenden Pixelsalat.

Phil
Zum Vergrößern anklicken....

Du solltest deine Hertzrate überprüfen.

Die scheint zu hoch zu sein.

Sie sollte be einem Flat/TFT-Schirm auf 60 Hertz liegen.

CW
 
hab gegoogelt bis die schwarte kracht, aber hat mir alles nix genutzt, auch der hinweis von dir brachte keinen Erfolg.
Er läd die Oberfläche ja korrekt, zumindest kann man grob die Oberfläche erahnen, aber die darstellung ist halt falsch.
Bin mir sehr sicher, das das Problem am Treiber bzw. an dessen Konfiguration bzw. der Konfiguration meines XFree liegt.
Wenn ich das glx modul lade, schmiert mir der bildschirm komplett ab, dann kann ich den XFree zwar noch beenden, aber muss die Kiste rebooten wenn ich mein Bild wieder haben will.

Ich glaub, wenn ich das nicht bald hin bekomme arbeite ich eben auf 1280 mit 16bit, bis dahin konnte ich es mit den standard VESA Treibern immerhin schon treiben... :-/
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Zurück
Oben