Xorg 7.3: xorg.conf-Auflösung wird ignoriert

likahuna

Beutelhalsbein
Servus

Grenzenlose Naivität trieb mich vor ein paar Tagen dazu,
die Ports meines FreeBSD 6.2 zu aktualisieren. So ging´s
auch von Xorg 7.2 auf 7.3. Also bis dahin ging
noch was. Lief auch alles viel zu problemlos, ich hätte
mißtrauisch werden sollen.

Danach wurde der Mauszeiger nicht angezeigt und
die xorg.conf-Auflösung ignoriert.
Egal welcher Windowmanager, Fluxbox oder Xfce.

Ich hab mich vorher nur oberflächlich kundig gemacht,
aber irgendwie hatten nur ATI- und NVIDIA-User Probleme
mit Xorg 7.3. Wer kümmert sich schon um die, ich hab´
nicht umsonst eine Matrox G550 AGP, die läuft immer
und notfalls auch mal übers Wasser.

Weil ich also sowieso keine Ahnung habe und ich geradeso
Portinstall anschubsen kann, hab ich den xf86- und xorg-Kram
einfach runter gehauen und nochmal wieder rauf.

Es ging danach auch wieder. Der Verdacht gegen
den MGA-Treiber erwies sich als unbegründet, weil
der schon vor Wochen aktualisiert wurde. Und da gab´s
keine Probleme. Xorg.conf wurde auch nicht verändert.

Heute wurde dann die geistige Umnachtung akut und
ich hab` einkomplettes Portupdate angeleiert weil ich
irgendeinen Scheiß updaten wollte.

Jetzt sitz ich wieder vor einem Screen ohne Mauszeiger (Maus geht aber)
und mit einer Auflösung, die selbst Blinde erschreckt.

Kurzum: Wie krieg ich das behoben? Anbei: Logwüste, für die ich mich
schonmal entschuldige..

dmesg:
Code:
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE-p7 #0: Sun Sep 16 22:33:17 CEST 2007
    kalle@dreckskind.foo.bar:/usr/obj/usr/src/sys/OLLEHIPPE
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium III/Pentium III Xeon/Celeron (501.14-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x673  Stepping = 3
  Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory  = 402587648 (383 MB)
avail memory = 384471040 (366 MB)
kbd1 at kbdmux0
cpu0 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 9 Entries> on motherboard
pci0: <PCI bus> on pcib0
agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C596 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xe000-0xe00f at device 7.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
uhci0: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 11 at device 7.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, HOST-PCI> at device 7.3 (no driver attached)
fxp0: <Intel 82558 Pro/100 Ethernet> port 0xe800-0xe81f mem 0xeb100000-0xeb100fff,0xeb000000-0xeb0fffff irq 11 at device 14.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:90:27:1d:d5:02
pcm0: <Creative CT5880-C> port 0xec00-0xec3f irq 10 at device 18.0 on pci0
pcm0: <SigmaTel STAC9708/11 AC97 Codec>
pcm0: <Playback: DAC2 / Record: ADC>
bktr0: <BrookTree 878> mem 0xeb101000-0xeb101fff irq 5 at device 20.0 on pci0
bktr0: [GIANT-LOCKED]
bktr0: Hauppauge Model 61324 D208
bktr0: Detected a MSP3415D-A2 at 0x80
bktr0: Hauppauge WinCast/TV, Philips PAL I tuner, msp3400c stereo, remote control.
pci0: <multimedia> at device 20.1 (no driver attached)
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xc8fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: [FAST]
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ppbus0: IEEE1284 device found /NIBBLE
Probing for PnP devices on ppbus0:
ppbus0: <Kyocera FS-680> PRINTER PCL5E,PJL
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0400> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
uhub1: vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/7.02, addr 2
uhub1: 4 ports with 4 removable, self powered
Timecounter "TSC" frequency 501141095 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 14659MB <FUJITSU MPF3153AT 0028> at ata0-master UDMA33
ad1: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly
ad1: WARNING - SETFEATURES SET TRANSFER MODE freeing taskqueue zombie request
ad1: 39205MB <Maxtor 6E040L0 NAR61590> at ata0-slave UDMA33
acd0: DVDR <NEC DVD RW ND-2500A/1.06> at ata1-master UDMA33
cd0 at ata1 bus 0 target 0 lun 0
cd0: <_NEC DVD_RW ND-2500A 1.06> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad0s1a
drm0: <Matrox G550 (AGP)> mem 0xe8000000-0xe9ffffff,0xe4000000-0xe4003fff,0xe5000000-0xe57fffff irq 11 at device 0.0 on pci1
info: [drm] AGP at 0xe0000000 64MB
info: [drm] Initialized mga 3.2.2 20060319
info: [drm] Initialized card for AGP DMA.
info: [drm] Initialized card for AGP DMA.
info: [drm] Initialized card for AGP DMA.

Xorg.0.log:
Code:
X.Org X Server 1.4.0
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: FreeBSD 6.2-RELEASE-p7 i386 
Current Operating System: FreeBSD dreckskind.foo.bar 6.2-RELEASE-p7 FreeBSD 6.2-RELEASE-p7 #0: Sun Sep 16 22:33:17 CEST 2007     kalle@dreckskind.foo.bar:/usr/obj/usr/src/sys/OLLEHIPPE i386
Build Date: 02 October 2007  03:35:14PM
 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 24 19:21:58 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/local/lib/X11/fonts/misc/,/usr/local/lib/X11/fonts/TTF/,/usr/local/lib/X11/fonts/OTF,/usr/local/lib/X11/fonts/Type1/,/usr/local/lib/X11/fonts/100dpi/,/usr/local/lib/X11/fonts/75dpi/.
(**) FontPath set to:
	/usr/local/lib/X11/fonts/misc/,
	/usr/local/lib/X11/fonts/TTF/,
	/usr/local/lib/X11/fonts/OTF,
	/usr/local/lib/X11/fonts/Type1/,
	/usr/local/lib/X11/fonts/100dpi/,
	/usr/local/lib/X11/fonts/75dpi/,
	/usr/local/lib/X11/fonts/misc/,
	/usr/local/lib/X11/fonts/TTF/,
	/usr/local/lib/X11/fonts/OTF,
	/usr/local/lib/X11/fonts/Type1/,
	/usr/local/lib/X11/fonts/100dpi/,
	/usr/local/lib/X11/fonts/75dpi/
(**) RgbPath set to "/usr/local/share/X11/rgb"
(**) ModulePath set to "/usr/local/lib/xorg/modules"
(II) Loader magic: 0x81aeda0
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.3
	X.Org Video Driver: 2.0
	X.Org XInput driver : 2.0
	X.Org Server Extension : 0.3
	X.Org Font Renderer : 0.5
(II) Loader running on freebsd
(II) LoadModule: "pcidata"
(II) Loading /usr/local/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 2.0
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9

(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(WW) OS did not count PCI devices, guessing wildly
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0691 card 0000,0000 rev 22 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,8598 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 1106,0596 card 1106,0000 rev 09 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 1106,0571 card 0000,0000 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:07:2: chip 1106,3038 card 0925,1234 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 1106,3050 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:0e:0: chip 8086,1229 card 8086,0009 rev 05 class 02,00,00 hdr 00
(II) PCI: 00:12:0: chip 1274,5880 card 1274,8001 rev 02 class 04,01,00 hdr 00
(II) PCI: 00:14:0: chip 109e,036e card 0070,13eb rev 02 class 04,00,00 hdr 80
(II) PCI: 00:14:1: chip 109e,0878 card 0070,13eb rev 02 class 04,80,00 hdr 80
(II) PCI: 01:00:0: chip 102b,2527 card 102b,0f84 rev 01 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
	[0] -1	0	0x0000d000 - 0x0000d0ff (0x100) IX[B]
	[1] -1	0	0x0000d400 - 0x0000d4ff (0x100) IX[B]
	[2] -1	0	0x0000d800 - 0x0000d8ff (0x100) IX[B]
	[3] -1	0	0x0000dc00 - 0x0000dcff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
	[0] -1	0	0xe4000000 - 0xe7ffffff (0x4000000) MX[B]
(II) Bus 1 prefetchable memory range:
	[0] -1	0	0xe8000000 - 0xe9ffffff (0x2000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI: (0:20:0) Brooktree Corporation Bt878 Video Capture rev 2, Mem @ 0xeb101000/12
(--) PCI:*(1:0:0) Matrox Graphics, Inc. MGA G550 AGP rev 1, Mem @ 0xe8000000/25, 0xe4000000/14, 0xe5000000/23
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xffffffff to 0xdfffffff
(II) Active PCI resource ranges:
	[0] -1	0	0xeb102000 - 0xeb103fff (0x2000) MX[B]E
	[1] -1	0	0xeb000000 - 0xebffffff (0x1000000) MX[B]E
	[2] -1	0	0xeb100000 - 0xeb1fffff (0x100000) MX[B]E
	[3] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]EO
	[4] -1	0	0xe5000000 - 0xe57fffff (0x800000) MX[B](B)
	[5] -1	0	0xe4000000 - 0xe4003fff (0x4000) MX[B](B)
	[6] -1	0	0xe8000000 - 0xe9ffffff (0x2000000) MX[B](B)
	[7] -1	0	0xeb101000 - 0xeb101fff (0x1000) MX[B](B)
	[8] -1	0	0x0000ec00 - 0x0000ecff (0x100) IX[B]E
	[9] -1	0	0x0000e800 - 0x0000e8ff (0x100) IX[B]E
	[10] -1	0	0x0000e400 - 0x0000e4ff (0x100) IX[B]E
	[11] -1	0	0x0000e000 - 0x0000e0ff (0x100) IX[B]E
(II) PCI Memory resource overlap reduced 0xeb000000 from 0xebffffff to 0xeb0fffff
(II) PCI Memory resource overlap reduced 0xeb100000 from 0xeb1fffff to 0xeb100fff
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0xeb102000 - 0xeb103fff (0x2000) MX[B]E
	[1] -1	0	0xeb000000 - 0xeb0fffff (0x100000) MX[B]E
	[2] -1	0	0xeb100000 - 0xeb100fff (0x1000) MX[B]E
	[3] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]EO
	[4] -1	0	0xe5000000 - 0xe57fffff (0x800000) MX[B](B)
	[5] -1	0	0xe4000000 - 0xe4003fff (0x4000) MX[B](B)
	[6] -1	0	0xe8000000 - 0xe9ffffff (0x2000000) MX[B](B)
	[7] -1	0	0xeb101000 - 0xeb101fff (0x1000) MX[B](B)
	[8] -1	0	0x0000ec00 - 0x0000ecff (0x100) IX[B]E
	[9] -1	0	0x0000e800 - 0x0000e8ff (0x100) IX[B]E
	[10] -1	0	0x0000e400 - 0x0000e4ff (0x100) IX[B]E
	[11] -1	0	0x0000e000 - 0x0000e0ff (0x100) IX[B]E
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xeb102000 - 0xeb103fff (0x2000) MX[B]E
	[5] -1	0	0xeb000000 - 0xeb0fffff (0x100000) MX[B]E
	[6] -1	0	0xeb100000 - 0xeb100fff (0x1000) MX[B]E
	[7] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]EO
	[8] -1	0	0xe5000000 - 0xe57fffff (0x800000) MX[B](B)
	[9] -1	0	0xe4000000 - 0xe4003fff (0x4000) MX[B](B)
	[10] -1	0	0xe8000000 - 0xe9ffffff (0x2000000) MX[B](B)
	[11] -1	0	0xeb101000 - 0xeb101fff (0x1000) MX[B](B)
	[12] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[13] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[14] -1	0	0x0000ec00 - 0x0000ecff (0x100) IX[B]E
	[15] -1	0	0x0000e800 - 0x0000e8ff (0x100) IX[B]E
	[16] -1	0	0x0000e400 - 0x0000e4ff (0x100) IX[B]E
	[17] -1	0	0x0000e000 - 0x0000e0ff (0x100) IX[B]E
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded by default.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "type1" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "dri"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "freetype"
(II) Loading /usr/local/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
	compiled for 1.4.0, module version = 2.1.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "type1"
(II) Loading /usr/local/lib/xorg/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 1.0.2
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "extmod"
(II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(==) AIGLX disabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "mga"
(II) Loading /usr/local/lib/xorg/modules/drivers//mga_drv.so
(II) Module mga: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 1.9.100
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/local/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 1.2.3
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/local/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 1.2.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.0
(II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
	mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI,
	mgag200 SE A PCI, mgag200 SE B PCI, mgag400, mgag550
(II) Primary Device is: PCI 01:00:0
(--) Chipset mgag550 found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xeb102000 - 0xeb103fff (0x2000) MX[B]E
	[5] -1	0	0xeb000000 - 0xeb0fffff (0x100000) MX[B]E
	[6] -1	0	0xeb100000 - 0xeb100fff (0x1000) MX[B]E
	[7] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]EO
	[8] -1	0	0xe5000000 - 0xe57fffff (0x800000) MX[B](B)
	[9] -1	0	0xe4000000 - 0xe4003fff (0x4000) MX[B](B)
	[10] -1	0	0xe8000000 - 0xe9ffffff (0x2000000) MX[B](B)
	[11] -1	0	0xeb101000 - 0xeb101fff (0x1000) MX[B](B)
	[12] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[13] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[14] -1	0	0x0000ec00 - 0x0000ecff (0x100) IX[B]E
	[15] -1	0	0x0000e800 - 0x0000e8ff (0x100) IX[B]E
	[16] -1	0	0x0000e400 - 0x0000e4ff (0x100) IX[B]E
	[17] -1	0	0x0000e000 - 0x0000e0ff (0x100) IX[B]E
(II) resource ranges after probing:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xeb102000 - 0xeb103fff (0x2000) MX[B]E
	[5] -1	0	0xeb000000 - 0xeb0fffff (0x100000) MX[B]E
	[6] -1	0	0xeb100000 - 0xeb100fff (0x1000) MX[B]E
	[7] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]EO
	[8] -1	0	0xe5000000 - 0xe57fffff (0x800000) MX[B](B)
	[9] -1	0	0xe4000000 - 0xe4003fff (0x4000) MX[B](B)
	[10] -1	0	0xe8000000 - 0xe9ffffff (0x2000000) MX[B](B)
	[11] -1	0	0xeb101000 - 0xeb101fff (0x1000) MX[B](B)
	[12] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[13] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[14] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[15] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[16] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[17] -1	0	0x0000ec00 - 0x0000ecff (0x100) IX[B]E
	[18] -1	0	0x0000e800 - 0x0000e8ff (0x100) IX[B]E
	[19] -1	0	0x0000e400 - 0x0000e4ff (0x100) IX[B]E
	[20] -1	0	0x0000e000 - 0x0000e0ff (0x100) IX[B]E
	[21] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[22] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/local/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 0.1.0
	ABI class: X.Org Video Driver, version 2.0
(--) MGA(0): Chipset: "mgag550"
(**) MGA(0): Depth 16, (--) framebuffer bpp 16
(==) MGA(0): RGB weight 565
(==) MGA(0): Using AGP 1x mode
(==) MGA(0): Using XAA acceleration
(--) MGA(0): Linear framebuffer at 0xE8000000
(==) MGA(0): MMIO registers at 0xE4000000
(--) MGA(0): Pseudo-DMA transfer window at 0xE5000000
(==) MGA(0): BIOS at 0xC0000
(--) MGA(0): Video BIOS info block at offset 0x07CE0
(==) MGA(0): Write-combining range (0xe4000000,0x4000) was already clear
(==) MGA(0): Write-combining range (0xe8000000,0x2000000)
(==) MGA(0): Write-combining range (0xe5000000,0x800000) was already clear
(--) MGA(0): VideoRAM: 32768 kByte
(II) MGA(0): I2C bus "DDC P1" initialized.
(II) MGA(0): I2C bus "DDC P2" initialized.
(II) MGA(0): Output DVI using monitor section Monitor0
(II) MGA(0): Output VGA has no monitor section
(==) MGA(0): Write-combining range (0xe4000000,0x4000) was already clear
(==) MGA(0): Write-combining range (0xe8000000,0x2000000)
(==) MGA(0): Write-combining range (0xe5000000,0x800000) was already clear
(II) MGA(0): I2C device "DDC P1:ddc2" registered at address 0xA0.
(II) MGA(0): I2C device "DDC P1:ddc2" removed.
(II) MGA(0): I2C device "DDC P2:ddc2" registered at address 0xA0.
(II) MGA(0): I2C device "DDC P2:ddc2" removed.
(II) MGA(0): Output DVI connected
(II) MGA(0): Output VGA connected
(II) MGA(0): Output DVI using initial mode 1152x768
(II) MGA(0): Output VGA using initial mode 1024x768
(==) MGA(0): Using gamma correction (1.0, 1.0, 1.0)
(==) MGA(0): Min pixel clock is 17 MHz
(--) MGA(0): Max pixel clock is 1200 MHz
(--) MGA(0): Has SDRAM
(--) MGA(0): Virtual size is 1600x1024 (pitch 0)
(**) MGA(0):  Default mode "1152x768": 65.0 MHz (scaled from 0.0 MHz), 44.2 kHz, 54.8 Hz
(II) MGA(0): Modeline "1152x768"x54.8   65.00  1152 1178 1314 1472  768 771 777 806 +hsync +vsync (44.2 kHz)
(**) MGA(0):  Default mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz
(II) MGA(0): Modeline "1024x768"x85.0   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync (68.7 kHz)
(**) MGA(0):  Default mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) MGA(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(**) MGA(0):  Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
(II) MGA(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(**) MGA(0):  Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) MGA(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(**) MGA(0):  Default mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
(II) MGA(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(**) MGA(0):  Default mode "800x600": 56.3 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.1 Hz
(II) MGA(0): Modeline "800x600"x85.1   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync (53.7 kHz)
(**) MGA(0):  Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
(II) MGA(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(**) MGA(0):  Default mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) MGA(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(**) MGA(0):  Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
(II) MGA(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(**) MGA(0):  Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
(II) MGA(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(**) MGA(0):  Default mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz
(II) MGA(0): Modeline "640x480"x85.0   36.00  640 696 752 832  480 481 484 509 -hsync -vsync (43.3 kHz)
(**) MGA(0):  Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
(II) MGA(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(**) MGA(0):  Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) MGA(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(**) MGA(0):  Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
(II) MGA(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(**) MGA(0):  Default mode "720x400": 35.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 85.0 Hz
(II) MGA(0): Modeline "720x400"x85.0   35.50  720 756 828 936  400 401 404 446 -hsync +vsync (37.9 kHz)
(**) MGA(0):  Default mode "640x400": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 85.1 Hz
(II) MGA(0): Modeline "640x400"x85.1   31.50  640 672 736 832  400 401 404 445 -hsync +vsync (37.9 kHz)
(**) MGA(0):  Default mode "640x350": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 85.1 Hz
(II) MGA(0): Modeline "640x350"x85.1   31.50  640 672 736 832  350 382 385 445 +hsync -vsync (37.9 kHz)
(**) MGA(0):  Default mode "1600x1024": 106.9 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) MGA(0): Modeline "1600x1024"x60.0  106.91  1600 1620 1640 1670  1024 1027 1030 1067 -hsync -vsync (64.0 kHz)
(**) MGA(0):  Default mode "1280x1024": 157.5 MHz (scaled from 0.0 MHz), 91.1 kHz, 85.0 Hz
(II) MGA(0): Modeline "1280x1024"x85.0  157.50  1280 1344 1504 1728  1024 1025 1028 1072 +hsync +vsync (91.1 kHz)
(**) MGA(0):  Default mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) MGA(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(**) MGA(0):  Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) MGA(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(**) MGA(0):  Default mode "1280x960": 148.5 MHz (scaled from 0.0 MHz), 85.9 kHz, 85.0 Hz
(II) MGA(0): Modeline "1280x960"x85.0  148.50  1280 1344 1504 1728  960 961 964 1011 +hsync +vsync (85.9 kHz)
(**) MGA(0):  Default mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
(II) MGA(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
(**) MGA(0):  Default mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) MGA(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(==) MGA(0): DPI set to (75, 75)
(II) MGA(0): YDstOrg is set to 0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/local/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/local/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 1.2.0
	ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0	0xe5000000 - 0xe57fffff (0x800000) MX[B]
	[1] 0	0	0xe4000000 - 0xe4003fff (0x4000) MX[B]
	[2] 0	0	0xe8000000 - 0xe9ffffff (0x2000000) MX[B]
	[3] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[4] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[5] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[6] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[7] -1	0	0xeb102000 - 0xeb103fff (0x2000) MX[B]E
	[8] -1	0	0xeb000000 - 0xeb0fffff (0x100000) MX[B]E
	[9] -1	0	0xeb100000 - 0xeb100fff (0x1000) MX[B]E
	[10] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]EO
	[11] -1	0	0xe5000000 - 0xe57fffff (0x800000) MX[B](B)
	[12] -1	0	0xe4000000 - 0xe4003fff (0x4000) MX[B](B)
	[13] -1	0	0xe8000000 - 0xe9ffffff (0x2000000) MX[B](B)
	[14] -1	0	0xeb101000 - 0xeb101fff (0x1000) MX[B](B)
	[15] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
	[16] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
	[17] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
	[18] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[19] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[20] -1	0	0x0000ec00 - 0x0000ecff (0x100) IX[B]E
	[21] -1	0	0x0000e800 - 0x0000e8ff (0x100) IX[B]E
	[22] -1	0	0x0000e400 - 0x0000e4ff (0x100) IX[B]E
	[23] -1	0	0x0000e000 - 0x0000e0ff (0x100) IX[B]E
	[24] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
	[25] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) MGA(0): Write-combining range (0xe4000000,0x4000) was already clear
(==) MGA(0): Write-combining range (0xe8000000,0x2000000)
(==) MGA(0): Write-combining range (0xe5000000,0x800000) was already clear
(II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) MGA(0): Write-combining range (0xa0000,0x10000) was already clear
(--) MGA(0): 16 DWORD fifo
(==) MGA(0): Default visual is TrueColor
(II) MGA(0): [drm] bpp: 16 depth: 16
(II) MGA(0): [drm] Sarea 2200+664: 2864
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such file or directory)
drmOpenDevice: open result is -1, (No such file or directory)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such file or directory)
drmOpenDevice: open result is -1, (No such file or directory)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] loaded kernel module for "mga" driver.
(II) [drm] DRM interface version 1.2
(II) [drm] DRM open master succeeded.
(II) MGA(0): [drm] Using the DRM lock SAREA also for drawables.
(II) MGA(0): [drm] framebuffer handle = 0xe8000000
(II) MGA(0): [drm] added 1 reserved context for kernel
(II) MGA(0): X context handle = 0x1
(II) MGA(0): [drm] installed DRM signal handler
(II) MGA(0): [dri] visual configs initialized
(II) MGA(0): Memory manager initialized to (0,0) (1600,3071)
(II) MGA(0): Largest offscreen area available: 1600 x 2047
(II) MGA(0): Reserved back buffer at offset 0x960000
(II) MGA(0): Reserved depth buffer at offset 0xc80000
(II) MGA(0): Reserved 16768 kb for textures at offset 0xfa0000
(II) MGA(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	Solid filled trapezoids
	8x8 mono pattern filled rectangles
	8x8 mono pattern filled trapezoids
	Indirect CPU to Screen color expansion
	Screen to Screen color expansion
	Solid Lines
	Dashed Lines
	Scanline Image Writes
	Offscreen Pixmaps
	Setting up tile and stipple cache:
		32 128x128 slots
		17 256x256 slots
		5 512x512 slots
(==) MGA(0): Backing store disabled
(==) MGA(0): Silken mouse enabled
(II) MGA(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) MGA(0): Using overlay video
(II) MGA(0): [DRI] installation complete
(II) MGA(0): [drm] Mapped 128 DMA buffers
(II) MGA(0): [drm] dma control initialized, using IRQ 11
(II) MGA(0): Direct rendering enabled
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/local/lib/xorg/modules/extensions//libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(II) MGA(0): Setting screen physical size to 304 x 203
(**) Option "Protocol" "auto"
(**) Mouse0: Device: "/dev/sysmouse"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/sysmouse"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 9
(**) Mouse0: Sensitivity: 1
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "de"
(**) Keyboard0: XkbLayout: "de"
(**) Option "XkbVariant" "nodeadkeys"
(**) Keyboard0: XkbVariant: "nodeadkeys"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) evaluating device (Mouse0)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(II) Mouse0: SetupAuto: hw.iftype is 4, hw.model is 0
(II) Mouse0: SetupAuto: protocol is SysMouse

xorg.conf:
Code:
Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	RgbPath      "/usr/local/share/X11/rgb"
	ModulePath   "/usr/local/lib/xorg/modules"
	FontPath     "/usr/local/lib/X11/fonts/misc/"
	FontPath     "/usr/local/lib/X11/fonts/TTF/"
	FontPath     "/usr/local/lib/X11/fonts/OTF"
	FontPath     "/usr/local/lib/X11/fonts/Type1/"
	FontPath     "/usr/local/lib/X11/fonts/100dpi/"
	FontPath     "/usr/local/lib/X11/fonts/75dpi/"
EndSection

Section "Module"
#	Load  "GLcore"
#	Load  "dbe"
#	Load  "dri"
#	Load  "extmod"
#	Load  "glx"
#	Load  "record"
#	Load  "xtrap"
	Load  "freetype"
	Load  "type1"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
	Option      "XkbRules"      "xorg"
        Option      "XkbModel"      "pc105"
        Option      "XkbLayout"     "de"
        Option      "XkbVariant"    "nodeadkeys" 
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/sysmouse"
	Option	    "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Samsung"
	ModelName    "SyncMaster_950p"
	HorizSync    30-96
	VertRefresh  50-160
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "SWcursor"           	# [<bool>]
        #Option     "HWcursor"           	# [<bool>]
        #Option     "PciRetry"           	# [<bool>]
        #Option     "SyncOnGreen"        	# [<bool>]
        #Option     "NoAccel"            	# [<bool>]
        #Option     "ShowCache"          	# [<bool>]
        #Option     "Overlay"            	# [<str>]
        #Option     "MGASDRAM"           	# [<bool>]
        #Option     "ShadowFB"           	# [<bool>]
        #Option     "UseFBDev"           	# [<bool>]
        #Option     "ColorKey"           	# <i>
        #Option     "SetMclk"            	# <freq>
        #Option     "OverclockMem"       	# [<bool>]
        #Option     "VideoKey"           	# <i>
        #Option     "Rotate"             	# [<str>]
        #Option     "TexturedVideo"      	# [<bool>]
        #Option     "Crtc2Half"          	# [<bool>]
        #Option     "Crtc2Ram"           	# <i>
        #Option     "Int10"              	# [<bool>]
        #Option     "AGPMode"            	# <i>
        #Option     "AGPSize"            	# <i>
        #Option     "DigitalScreen1"     	# [<bool>]
        #Option     "DigitalScreen2"     	# [<bool>]
        #Option     "TV"                 	# [<bool>]
        #Option     "TVStandard"         	# [<str>]
        #Option     "CableType"          	# [<str>]
        #Option     "NoHal"              	# [<bool>]
        #Option     "SwappedHead"        	# [<bool>]
        #Option     "DRI"                	# [<bool>]
        #Option     "MergedFB"           	# [<bool>]
        #Option     "Monitor2HSync"      	# [<str>]
        #Option     "Monitor2VRefresh"   	# [<str>]
        #Option     "Monitor2Position"   	# [<str>]
        #Option     "MetaModes"          	# [<str>]
        #Option     "OldDmaInit"         	# [<bool>]
        #Option     "ForcePciDma"        	# [<bool>]
        #Option     "AccelMethod"        	# [<str>]
	Identifier  "Card0"
	Driver      "mga"
	VendorName  "Matrox Graphics, Inc."
	BoardName   "MGA G550 AGP"
	BusID       "PCI:1:0:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	DefaultDepth 16

	SubSection "Display"
		Viewport	0 0
		Depth		16
		Modes		"1280x1024"
	EndSubSection

EndSection

Dankbar wie üblich, beutelhalsbein.
 

bluebyte

Euer Merkwürden hier
Merkwürdich, die Maus wir bei dir ordentlich initialisiert. Bei mir im log sieht es nicht anders aus. Siehe hier.

Was mich eher stutzig macht, sind diese Zeilen
Code:
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such file or directory)
drmOpenDevice: open result is -1, (No such file or directory)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such file or directory)
drmOpenDevice: open result is -1, (No such file or directory)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0

Hast du kein dri installiert?
Was sagt dir pkg_info | grep dri?
Wenn kein dri installiert ist, dann mach einfach mal ein portinstall dri!
Dann nimm dir mal deine xorg.conf vor und ändere mal
Code:
Load  "dri"

So sieht mein bereich aus

Code:
Section "Module"
	Load  "extmod"
	Load  "record"
	Load  "dbe"
	Load  "glx"
	Load  "GLcore"
	Load  "xtrap"
	Load  "dri"
	Load  "freetype"
	Load  "type1"
EndSection

Ergänzung:
Mir fiehl auf, dass du eine PS2 Mouse verwendest. Dann ändere in deiner xorg.conf die Ziele

Code:
Option	    "Device" "/dev/sysmouse"

in

Code:
Option	    "Device" "/dev/psm0"

dann solltest du wieder eine Maus haben.

So jetzt müsste auch mein Link oben funktionieren, da war ein http:// zuviel.
 
Zuletzt bearbeitet:

likahuna

Beutelhalsbein
Die Maus funktioniert de facto

... wird halt nur kein Zeiger angezeigt. Aber ich kann blind klicken und so. Was ich nicht mehr kann, wenn ich auf psm0 umstelle.

dri ist installiert.
 

Kamikaze

Warrior of Sunlight
Schau mal in der Manpage deines Grafiktreibers, normalerweise kann man den Hardwarecursor abschalten. Ein Softwarecursor sollte auf jeden Fall gehen.
 

likahuna

Beutelhalsbein
Der Mauscursor hat´s euch angetan, oder? Dabei halte ich den für das letzte meiner Probleme.

Ich war wohl in der Problemschilderung unpräzise: Sobald ich beispielsweise Fluxbox
starte stimmt zwar die Farbtiefe aber die Auflösung ist im Keller und er stellt nur einen
Teil von Fluxbox dar, der rechte Rand wird um etliche Pixel unterschlagen. Bei Xfce wird
unten und seitlich in der Darstellung gespart. Ich kriege also nichtmal den kompletten Screen zu sehen. Das hätte ich wohl früher erwähnen sollen...

Also die Maus rühr ich erstmal nicht an, die ist hier noch am besten im Rennen.
 

likahuna

Beutelhalsbein
Schau mal in der Manpage deines Grafiktreibers, normalerweise kann man den Hardwarecursor abschalten. Ein Softwarecursor sollte auf jeden Fall gehen.

Okay, ich muß Abbitte leisten. Den Cursor habe ich schon mal wieder. Danke für den Hinweis.

Nachtrag:
Mein Xorg.0.log erzählt ja:
"(II) MGA(0): Output DVI using monitor section Monitor0"
"(II) MGA(0): Output VGA has no monitor section"

...

"(--) MGA(0): Virtual size is 1600x1024 (pitch 0)"

Gibt´s eigtl. eine Möglichkeit ohne großes DualHead-Xinerama-Voodoo der Göre zu erklären,
doch bitte den DVI-Ausgang zu ignorieren und stinknormal den VGA-Ausgang zu verwenden, weil
sich das mal einfach so gehört, wenn da der einzig vorhandene Monitor dranhängt? So wie das
in prä-Xorg7.3er so schön daukompatibel für mich geklappt hat. Ich hab den DVI-Ausgang
jedenfalls nicht bestellt.
 
Zuletzt bearbeitet:

Gronau

Well-Known Member
Das Problem mit der Auflösung hab ich auch und bisher nur eine provisorische lösung gefunden: xrandr(1) installieren und nach jedem start von x11 xrandr --size 1024x768 (oder welche auflösung auch immer man haben will) eingeben.
 

Kamikaze

Warrior of Sunlight
Normalerweise sollte xrandr schon da sein. Wenn du es nachinstallieren musst, ist dein xorg nicht komplett. Besteht die Möglichkeit, dass X eine Auflösung erkennt, die vom Monitor nicht unterstützt wird?

Wenn ja trag in deine Monitor Section einfach PreferredMode und eventuell auch TargetRefresh ein.
 

likahuna

Beutelhalsbein
Auf Xrandr und PreferrdMode und das ganze Gedöns bin ich dann auch gekommen.
Immerhin werden die Pixel jetzt ordnungsgemäß in 1024x768 sortiert. Das ist zwar
noch ein bisschen von den seligen 1280x1024 entfernt aber wenn die Taube auf dem
Dach hockt, dreht man halt dem Spatz den Hals um.

Mal so am Rande: Wo fange ich an, Schrauben zu drehen, wenn ich den Ovelaymode von XawTV
wieder zum laufen kriegen will?
 

likahuna

Beutelhalsbein
Schöne Frage. Weil xrandr -q nix genehmes anzeigt, habe ich das manuell nachgetragen, inkl. modeline und all den arkanen Kram. Wenn ich dann xrandr mit der 1280er Auflösung abfeuere, seh´ ich schwarz. Bei einigen esoterischen Konfigurationen fällt wohl der mga-treiber negativ auf aber einfach nur den verfickten VGA-Ausgang mit genehmer Auflösung ansteuern sollte wohl gehen. Am WE teste ich mal mit nem anderen Monitor. Aber ich kenn das schon, am Ende hab´ ich irgendwas verbockt, sogesehen ist der funktionierende Rechner an sich schon eine wahre Pracht, mit SXGA oder ohne. Sowieso: besten Dank für die Hilfe.
 

Kamikaze

Warrior of Sunlight
Ist das ein Röhrenmonitor? Wenn ja, dann verzerrt dir 1280x1024 sowieso die Geometrie. Dann solltest du stattdessen 1280x960 probieren.
 

likahuna

Beutelhalsbein
Halleluja, preiset den heiligen Arsch der da kommt, wenn sich der Himmel
einst öffnet und uns alle zuscheißen wird. Achja, und nochmals Danke Kamikaze.

Er tut´s mit 1280x960 auf dem VGA-Ausgang. Ich musste nur die stinkende Auflösung
runterdrehen. Jetzt stürzt er nur noch ab, wenn ich zu dolle an Xfce rumspiele, was
ich einfachmal der pädagogischen Ader meines Rechners zuschreibe. Dagegen hilft
Fluxbox.

Anbei die Xorg-Konfiguration die letztlich funktionierte.


Code:
Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	RgbPath      "/usr/local/share/X11/rgb"
	ModulePath   "/usr/local/lib/xorg/modules"
	FontPath     "/usr/local/lib/X11/fonts/misc/"
	FontPath     "/usr/local/lib/X11/fonts/TTF/"
	FontPath     "/usr/local/lib/X11/fonts/OTF"
	FontPath     "/usr/local/lib/X11/fonts/Type1/"
	FontPath     "/usr/local/lib/X11/fonts/100dpi/"
	FontPath     "/usr/local/lib/X11/fonts/75dpi/"
EndSection

Section "Module"
	Load  "extmod"
	Load  "record"
	Load  "dbe"
	Load  "glx"
	Load  "GLcore"
	Load  "xtrap"
	Load  "dri"
	Load  "freetype"
	Load  "type1"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
        Option      "XkbRules"      "xfree86"
        Option      "XkbModel"      "pc102"
        Option      "XkbLayout"     "de"
        Option      "XkbVariant"    "nodeadkeys"    
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/sysmouse"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Samsung"
	ModelName    "SyncMaster_950p"
	Modeline "1280x960_85.00"  149.43  1280 1376 1512 1744  960 961 964 1008  -HSync +Vsync	
	Option "PreferredMode"	"1280x960_85.00"
EndSection

Section "Device"
	Identifier  "Card0"
	Driver      "mga"
	VendorName  "Matrox Graphics, Inc."
	BoardName   "MGA G550 AGP"
	BusID       "PCI:1:0:0"
        Option	    "HWcursor"	"false"
	Option "Monitor-VGA" "Monitor0"

EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	SubSection "Display"
		Depth     16
	EndSubSection
EndSection
 
Oben