zeigt her eure dmesgs...

dettus

Bicycle User
ich weiss nicht, obs schon einen thread dafuer gibt, aber ich denke es ist mal witzig sich gegenseitig die dmesgs um die ohren zu hauen.
ich fang mal an:

laptop: (openbsd 3.6)
Code:
OpenBSD 3.6 (GENERIC) #59: Fri Sep 17 12:32:57 MDT 2004
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: mobile AMD Athlon(tm) XP-M 2200+ ("AuthenticAMD" 686-class) 1.67 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem  = 266903552 (260648K)
avail mem = 236527616 (230984K)
using 3283 buffers containing 13447168 bytes (13132K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(e0) BIOS, date 03/25/03, BIOS32 rev. 0 @ 0xfd826
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 92%
apm0: AC on, battery charge high, charging
pcibios0 at bios0: rev 2.1 @ 0xfd680/0x980
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf60/128 (6 entries)
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT82C596A ISA" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0xfc00 0xdc000/0x4000! 0xe0000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8366 PCI" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8366 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Nvidia GeForce4 420 Go" rev 0xa3
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
rl0 at pci0 dev 12 function 0 "Realtek 8139" rev 0x10: irq 9 address 08:00:46:af:b7:eb
rlphy0 at rl0 phy 0: RTL internal phy
cbb0 at pci0 dev 14 function 0 "Ricoh 5C476 CardBus" rev 0xaa: irq 11
cbb1 at pci0 dev 14 function 1 "Ricoh 5C476 CardBus" rev 0xaa: irq 9
"Ricoh 5C552 Firewire" rev 0x02 at pci0 dev 14 function 2 not configured
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x80: irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x80pci_intr_map: no mapping for pin B
: couldn't map interrupt
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x80pci_intr_map: no mapping for pin C
: couldn't map interrupt
ehci0 at pci0 dev 16 function 3 "VIA VT6202 USB 2.0" rev 0x82pci_intr_map: no mapping for pin D
: couldn't map interrupt
pcib0 at pci0 dev 17 function 0 "VIA VT8235 ISA" rev 0x00
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <HITACHI_DK23EA-40>
wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-R6012, 1S32> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x50: irq 9
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auvia0
"VIA VT82C686 Modem" rev 0x80 at pci0 dev 17 function 6 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0x40
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0 cacheline 0x0, lattimer 0x40
pcmcia1 at cardslot1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ef7d netmask ef7d ttymask ffff
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302

webserver: (openbsd 3.5)
Code:
OpenBSD 3.5 (GENERIC) #34: Mon Mar 29 12:24:55 MST 2004
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) CPU 2.40GHz ("GenuineIntel" 686-class) 2.40 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem  = 402173952 (392748K)
avail mem = 366338048 (357752K)
using 4278 buffers containing 20209664 bytes (19736K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(d0) BIOS, date 02/03/04, BIOS32 rev. 0 @ 0xfb330
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0xdf84
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfde90/240 (13 entries)
pcibios0: PCI Exclusive IRQs: 5 9 10 11 12
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371SB ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x1000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845 Host" rev 0x04
ppb0 at pci0 dev 1 function 0 "Intel 82845 AGP" rev 0x04
pci1 at ppb0 bus 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x05
pci2 at ppb1 bus 2
fxp0 at pci2 dev 6 function 0 "Intel 82557" rev 0x08: irq 11, address 00:30:48:53:20:b6
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
fxp1 at pci2 dev 7 function 0 "Intel 82557" rev 0x08: irq 10, address 00:30:48:53:20:b7
inphy1 at fxp1 phy 1: i82555 10/100 media interface, rev. 4
vga1 at pci2 dev 8 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 "Intel 82801BA LPC" rev 0x05
pciide0 at pci0 dev 31 function 1 "Intel 82801BA IDE" rev 0x05: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <ExcelStor Technology J360>
wd0: 16-sector PIO, LBA48, 58644MB, 120103200 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 disabled (no drives)
"Intel 82801BA SMBus" rev 0x05 at pci0 dev 31 function 3 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: W83627HF
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask 4000 netmask 4c00 ttymask 4c82
pctr: user-level cycle counter enabled
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
 

SierraX

Well-Known Member
NY *BSD User Group hat vor ein paar Wochen mal zu Hilfszwecken dmesg's aus aller Welt gesucht.

Im 'lokalen' Forum macht es iirc noch wesentlich mehr Sinn, da man, wenn eine Konfiguration der eigenen entspricht, die User direkt ansprechen kann, wie sie ein Kernel problem gelöst haben.

Vieleicht sollte man aber auch noch die genaue ausstattung des Rechners erwähnen, da ein decodieren der dmesg recht müselig ist.

Ich liefere meine bei gelegenheit nach.
 
Zuletzt bearbeitet:

[moR-pH-euS]

Magnum P.I.
hier mal von meinem neuen netbsd 2.0 server (gestern mal installiert *freu*)

Code:
netbsd% dmesg
NetBSD 2.0.1 (ROUTER) #0: Sun Feb 13 14:58:57 CET 2005
        morpheus@netbsd:/usr/src/sys/arch/i386/compile/ROUTER
total memory = 127 MB
avail memory = 121 MB
BIOS32 rev. 0 found at 0xfb080
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium II (686-class), 334.11 MHz, id 0x651
cpu0: features 183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 183f9ff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu0: features 183f9ff<FXSR>
cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu0: L2 cache 512 KB 32B/line 4-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: 32 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443LX PCI AGP Controller (PAC) (rev. 0x03)
agp0 at pchb0: aperture at 0xe0000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: Intel 82443LX AGP Interface (PAC) (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: ATI Technologies 3D Rage Pro (AGP) (rev. 0x5c)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x02)
piixide0 at pci0 dev 7 function 1
piixide0: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
Intel 82371AB USB Host Controller (PIIX4) (USB serial bus, revision 0x01) at pci0 dev 7 function 2 not configured
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge, revision 0x02) at pci0 dev 7 function 3 not configured
tlp0 at pci0 dev 15 function 0: ADMtek AN985 Ethernet, pass 1.1
tlp0: interrupting at irq 10
tlp0: Ethernet address 00:30:f1:6b:09:a6
ukphy0 at tlp0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x00e092, model 0x0001, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ahc0 at pci0 dev 16 function 0: Adaptec 2940 Ultra SCSI adapter
ahc0: interrupting at irq 9
ahc0: aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
scsibus0 at ahc0: 16 targets, 8 luns per target
ne0 at pci0 dev 18 function 0: Realtek 8029 Ethernet
ne0: Ethernet address 00:00:e8:6c:41:d6
ne0: 10base2, 10baseT, 10baseT-FDX, auto, default [0x00 0x30] auto
ne0: interrupting at irq 12
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
Kernelized RAIDframe activated
scsibus0: waiting 2 seconds for devices to settle...
wd0 at atabus0 drive 0: <Maxtor 90432D3>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 4121 MB, 8374 cyl, 16 head, 63 sec, 512 bytes/sect x 8440992 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <CD-532E-A, , 1.0A> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
wd1 at atabus1 drive 1: <SAMSUNG SP0802N>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 76351 MB, 155127 cyl, 16 head, 63 sec, 512 bytes/sect x 156368016 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(piixide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
wd1(piixide0:1:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
st0 at scsibus0 target 4 lun 0: <HP, HP35480A, 1109> tape removable
st0: drive empty
st0: sync (200.00ns offset 8), 8-bit (5.000MB/s) transfers
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
 
L

lems

Guest
Hier mein Arbeitstier:

Code:
NetBSD 2.0.1 (THEWIRED) #0: Tue Feb 15 10:53:06 GMT 2005
	lems@kafka:/usr/src/sys/arch/i386/compile/THEWIRED
total memory = 255 MB
avail memory = 248 MB
BIOS32 rev. 0 found at 0xf0bf0
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium III (686-class), 801.86 MHz, id 0x686
cpu0: features 387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 387f9ff<PGE,MCA,CMOV,PAT,PSE36,PN,MMX>
cpu0: features 387f9ff<FXSR,SSE>
cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu0: L2 cache 256 KB 32B/line 8-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: serial number 0000-0686-0003-4F25-31AE-724D
cpu0: 8 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82815 Hub (rev. 0x02)
pchb0: random number generator enabled
agp0 at pchb0: using generic initialization for Intel AGP
agp0: aperture at 0xf8000000, size 0x2400000
ppb0 at pci0 dev 1 function 0: Intel 82815 AGP (rev. 0x02)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: Matrox MGA G400 AGP (rev. 0x85)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
ppb1 at pci0 dev 30 function 0: Intel 82801BA Hub-to-PCI Bridge (rev. 0x02)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
ex0 at pci2 dev 12 function 0: 3Com 3c905C-TX 10/100 Ethernet with mngmt (rev. 0x74)
ex0: interrupting at irq 7
ex0: MAC address 00:50:da:c7:cb:ff
bmtphy0 at ex0 phy 24: Broadcom 3c905C internal PHY, rev. 6
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
emuxki0 at pci2 dev 14 function 0: Creative Labs SBLive! EMU 10000 (audio multimedia, revision 0x07)
emuxki0: interrupting at irq 4
emuxki0: ac97: SigmaTel STAC9721/23 codec; 18 bit DAC, 18 bit ADC, SigmaTel 3D
emuxki0: ac97: ext id 200<AMAP>
audio0 at emuxki0: full duplex, mmap, independent
joy0 at pci2 dev 14 function 1: Creative Labs PCI Gameport Joystick (rev 0x07)
joy0: joystick not connected
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801BA LPC Interface Bridge (rev. 0x02)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801BA IDE Controller (ICH2) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
uhci0 at pci0 dev 31 function 2: Intel 82801BA USB Controller (rev. 0x02)
uhci0: interrupting at irq 3
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Intel 82801BA SMBus Controller (SMBus serial bus, revision 0x02) at pci0 dev 31 function 3 not configured
uhci1 at pci0 dev 31 function 4: Intel 82801BA USB Controller (rev. 0x02)
uhci1: interrupting at irq 9
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
isa0 at pcib0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
apm0 at mainbus0: Power Management spec V1.2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
uhub2 at uhub1 port 2uhub3 at uhub0 port 1
uhub2: ALCOR Generic USB Hub, class 9/0, rev 1.10/1.00, addr 2

uhub3: Genesys Logic USB Hub, class 9/0, rev 1.01/0.12, addr 2
uhub2: 4 ports with 4 removable, self powered
uhub3: 4 ports with 4 removable, self powered
wd0 at atabus0 drive 0ulpt0 at uhub3 port 2 configuration 1 interface 0: <WDC WD800JB-00CRA1>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-ST DVDRAM GSA-4082B, K2145BI0807, A207> cdrom removable

ulpt0: EPSON USB Printer, rev 1.10/1.00, addr 3, iclass 7/1
ulpt0: using bi-directional mode
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
uhidev0 at uhub3 port 3 configuration 1 interface 0
uhidev0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev 1.10/3.00, addr 4, iclass 3/1
ums0 at uhidev0: 5 buttons and Z dir.
wsmouse0 at ums0 mux 0
uscanner0 at uhub3 port 4
uscanner0: AGFA SNAPSCAN, rev 1.00/1.00, addr 5
uhidev1 at uhub0 port 2 configuration 1 interface 0
uhidev1: Logitech HID compliant keyboard, rev 1.10/1.80, addr 6, iclass 3/1
ukbd0 at uhidev1
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev2 at uhub0 port 2 configuration 1 interface 1
uhidev2: Logitech HID compliant keyboard, rev 1.10/1.80, addr 6, iclass 3/0
uhidev2: 2 report ids
uhid0 at uhidev2 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev2 reportid 2: input=1, output=0, feature=0
umass0 at uhub3 port 1 configuration 1 interface 0
umass0: Creative Tech NOMAD MuVo TX, rev 2.00/10.21, addr 7
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Creative, NOMAD MuVo TX, 0100> disk removable
sd0: fabricating a geometry
sd0: 491 MB, 491 cyl, 64 head, 32 sec, 512 bytes/sect x 1005824 sectors
sd0: fabricating a geometry
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

edit: Dmesg mit all meinen Geräten.
 
Zuletzt bearbeitet von einem Moderator:

zmieff

Well-Known Member
hier meine, auch NetBSD 2.0:

NetBSD 2.0 (IBM_APM0) #0: Sat Feb 12 14:36:28 CET 2005
zmieff@netbsdbox:/usr/src/sys/arch/i386/compile/IBM_APM0
total memory = 510 MB
avail memory = 494 MB
BIOS32 rev. 0 found at 0xfd750
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium Pro, II or III (686-class), 1498.80 MHz, id 0x6d6
cpu0: features afe9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR>
cpu0: features afe9f9bf<PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX>
cpu0: features afe9f9bf<FXSR,SSE,SSE2,SS,TM,SBF>
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82855PM MCH Host Controller (rev. 0x03)
agp0 at pchb0: aperture at 0xd0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0: Intel 82855PM Host-to-AGP Bridge (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: ATI Technologies Radeon Mobility M7 LW (AGP) (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
uhci0 at pci0 dev 29 function 0: Intel 82801DB/DBM USB UHCI Controller #1 (rev. 0x01)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801DB/DBM USB UHCI Controller #2 (rev. 0x01)
uhci1: interrupting at irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801DB/DBM USB UHCI Controller #3 (rev. 0x01)
uhci2: interrupting at irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7: Intel 82801DB/DBM USB EHCI Controller (rev. 0x01)
ehci0: interrupting at irq 11
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb1 at pci0 dev 30 function 0: Intel 82801BAM Hub-to-PCI Bridge (rev. 0x81)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
cbb0 at pci2 dev 0 function 0: Texas Instruments PCI4520 PCI-CardBus Bridge w/ OHCI IEEE 1394 Controller (rev. 0x01)
Texas Instruments PCI4520 OHCI IEEE 1394 HOST Controller w/ PCI-CardBus Bridge (Firewire serial bus, interface 0x10, revision 0x01) at pci2 dev 0 function 2 not configured
wm0 at pci2 dev 1 function 0: Intel i82540EP 1000BASE-T Ethernet, rev. 3
wm0: interrupting at irq 11
wm0: 32-bit 33MHz PCI bus
wm0: 64 word (6 address bits) MicroWire EEPROM
wm0: Ethernet address 00:0d:60:fc:4c:6b
makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 4
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
Intel product 0x4220 (miscellaneous network, revision 0x05) at pci2 dev 2 function 0 not configured
cbb0: interrupting at irq 11
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801DB ISA Bridge (rev. 0x01)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801DBM IDE Controller (ICH4-M) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
Intel 82801DB/DBM SMBus Controller (SMBus serial bus, revision 0x01) at pci0 dev 31 function 3 not configured
auich0 at pci0 dev 31 function 5: i82801DB/DBM (ICH4/ICH4M) AC-97 Audio
auich0: interrupting at irq 11
auich0: ac97: Analog Devices AD1981B codec; headphone, 20 bit DAC, no 3D stereo
auich0: ac97: ext id 601<AC97_22,AMAP,VRA>
Intel 82801DB/DBM AC97 Modem Controller (modem communications, revision 0x01) at pci0 dev 31 function 6 not configured
isa0 at pcib0
lpt2 at isa0 port 0x3bc-0x3bf irq : polled
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
isapnp0: no ISA Plug 'n Play devices found
apm0 at mainbus0: Power Management spec V1.2
auich0: measured ac97 link rate at 48001 Hz, will use 48000 Hz
audio0 at auich0: full duplex, mmap, independent
Kernelized RAIDframe activated
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: Logitech USB Receiver, rev 1.10/9.10, addr 2, iclass 3/1
ums0 at uhidev0: 5 buttons and Z dir.
wsmouse1 at ums0 mux 0
wd0 at atabus0 drive 0: <IC25N040ATMR04-0>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 38154 MB, 77520 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <DW-225, , 2.2B> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
 

sir_eidrien

Nuklearer Mailhamster...
Hier mein etwas betagter IBM-Desktop-PC der sein Dasein als Jail-Master/Webserver/Testbastelkiste fristet ;)

Code:
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE-p5 #0: Fri Feb  4 07:08:31 CET 2005
    annenad@www.annen.netz:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium III/Pentium III Xeon/Celeron (497.84-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x673  Stepping = 3
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 134205440 (127 MB)
avail memory = 121679872 (116 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 9 Entries> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xec000000-0xefffffff at device 0.0 on pci0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 1.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xfff0-0xffff,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 2.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xff00-0xff1f irq 11 at device 2.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 2.3 (no driver attached)
fxp0: <Intel 82558 Pro/100 Ethernet> port 0x7c60-0x7c7f mem 0xf3f00000-0xf3ffffff,0xf3eff000-0xf3efffff irq 11 at device 3.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:06:29:05:6c:0e
cpu0 on motherboard
orm0: <ISA Option ROMs> at iomem 0xc8000-0xc87ff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0401> can't assign resources (port)
Timecounter "TSC" frequency 497837683 Hz quality 800
Timecounters tick every 10.000 msec
ad0: 12949MB <IBM-DPTA-371360/P74IA30A> [26310/16/63] at ata0-master UDMA33
acd0: CDROM <CRD-8400B/1.10> at ata1-master UDMA33

Greets, s_e
 

ookami

Kette rechts!
NetBSD 2.0.1

Code:
NetBSD 2.0.1 (HIKARU) #0: Sun Feb  6 22:52:49 CET 2005
	[email]root@hikaru.hakushi.org[/email]:/usr/src/sys/arch/i386/compile/HIKARU
total memory = 511 MB
avail memory = 492 MB
BIOS32 rev. 0 found at 0xfb3f0
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon XP 2400+ (686-class), 1997.13 MHz, id 0x681
cpu0: features c3c3fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features c3c3fbff<PGE,MCA,CMOV,PAT,PSE36,MMXX,MMX>
cpu0: features c3c3fbff<FXSR,SSE,3DNOW2,3DNOW>
cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu0: L2 cache 256 KB 64B/line 16-way
cpu0: ITLB 16 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries 4-way
cpu0: 8 page colors
acpi0 at mainbus0
acpi0: using Intel ACPI CA subsystem version 20040211
acpi0: X/RSDT: OemId <Nvidia,AWRDACPI,42302e31>, AslId <AWRD,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
PNP0C02 at acpi0 not configured
PNP0C02 at acpi0 not configured
acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
PNP0C01 at acpi0 not configured
PNP0A03 at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C02 at acpi0 not configured
PNP0000 at acpi0 not configured
PNP0200 at acpi0 not configured
PNP0100 at acpi0 not configured
PNP0B00 at acpi0 not configured
PNP0800 at acpi0 not configured
PNP0C04 at acpi0 not configured
PNP0700 at acpi0 not configured
PNP0501 at acpi0 not configured
PNP0501 at acpi0 not configured
PNP0401 at acpi0 not configured
PNP0F13 at acpi0 not configured
PNP0303 at acpi0 not configured
PNP0C0B at acpi0 not configured
acpitz0 at acpi0: ACPI Thermal Zone
acpitz0: unable to get polling interval; using default of 30.0s
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Nvidia Corporation nForce2 Host-PCI Bridge (rev. 0xc1)
agp at pchb0 not configured
Nvidia Corporation nForce2 Memory Controller (RAM memory, revision 0xc1) at pci0 dev 0 function 1 not configured
Nvidia Corporation nForce2 Memory Controller (RAM memory, revision 0xc1) at pci0 dev 0 function 2 not configured
Nvidia Corporation nForce2 Memory Controller (RAM memory, revision 0xc1) at pci0 dev 0 function 3 not configured
Nvidia Corporation nForce2 Memory Controller (RAM memory, revision 0xc1) at pci0 dev 0 function 4 not configured
Nvidia Corporation nForce2 Memory Controller (RAM memory, revision 0xc1) at pci0 dev 0 function 5 not configured
pcib0 at pci0 dev 1 function 0
pcib0: Nvidia Corporation nForce2 PCI-ISA bridge (rev. 0xa3)
Nvidia Corporation nForce2 SMBus Controller (SMBus serial bus, revision 0xa2) at pci0 dev 1 function 1 not configured
ohci0 at pci0 dev 2 function 0: Nvidia Corporation nForce2 USB Host Controller (rev. 0xa3)
ohci0: interrupting at irq 11
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Nvidia Corporat OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 2 function 1: Nvidia Corporation nForce2 USB Host Controller (rev. 0xa3)
ohci1: interrupting at irq 5
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Nvidia Corporat OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ehci0 at pci0 dev 2 function 2: Nvidia Corporation nForce2 USB2 Host Controller (rev. 0xa3)
ehci0: interrupting at irq 10
ehci0: EHCI version 1.0
ehci0: companion controllers, 4 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: Nvidia Corporat EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
Nvidia Corporation nForce2 Ethernet (ethernet network, revision 0xa1) at pci0 dev 4 function 0 not configured
Nvidia Corporation nForce2 MCP-T Audio Processing Unit (audio multimedia, revision 0xa2) at pci0 dev 5 function 0 not configured
auich0 at pci0 dev 6 function 0: nForce2 MCP-T AC-97 Audio
auich0: interrupting at irq 10
auich0: ac97: Avance Logic ALC650 codec; 20 bit DAC, 18 bit ADC, Realtek 3D
auich0: ac97: ext id 5c7<AC97_22,LDAC,SDAC,CDAC,SPDIF,DRA,VRA>
ppb0 at pci0 dev 8 function 0: Nvidia Corporation nForce2 PCI-PCI bridge (rev. 0xa3)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
ex0 at pci1 dev 8 function 0: 3Com 3c905C-TX 10/100 Ethernet with mngmt (rev. 0x78)
ex0: interrupting at irq 11
ex0: MAC address 00:0a:5e:23:ae:ce
exphy0 at ex0 phy 24: 3Com internal media interface
exphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ex1 at pci1 dev 10 function 0: 3Com 3c905C-TX 10/100 Ethernet with mngmt (rev. 0x78)
ex1: interrupting at irq 5
ex1: MAC address 00:0a:5e:3e:6d:f1
exphy1 at ex1 phy 24: 3Com internal media interface
exphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
viaide0 at pci0 dev 9 function 0
viaide0: NVIDIA nForce2 IDE Controller (rev. 0xa2)
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at irq 14
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at irq 15
atabus1 at viaide0 channel 1
Nvidia Corporation nForce2 Firewire Controller (Firewire serial bus, interface 0x10, revision 0xa3) at pci0 dev 13 function 0 not configured
ppb1 at pci0 dev 30 function 0: Nvidia Corporation nForce2 PCI-PCI Bridge (rev. 0xc1)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
vga1 at pci2 dev 0 function 0: ATI Technologies Radeon 9200SE (rev. 0x01)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
auich0: measured ac97 link rate at 47997 Hz, will use 48000 Hz
audio0 at auich0: full duplex, mmap, independent
Kernelized RAIDframe activated
IPsec: Initialized Security Association Processing.
wd0 at atabus0 drive 0: <Maxtor 6E040L0>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 39205 MB, 79656 cyl, 16 head, 63 sec, 512 bytes/sect x 80293248 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1 at atabus0 drive 1: <Maxtor 6E040L0>
wd1: drive supports 16-sector PIO transfers, LBA addressing
wd1: 39205 MB, 79656 cyl, 16 head, 63 sec, 512 bytes/sect x 80293248 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA data transfers)
wd1(viaide0:0:1): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA data transfers)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <PHILIPS DVDR824DP, , P3.0> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd1 at atapibus0 drive 1: <24X10, , P.JJ> cdrom removable
cd1: 32-bit data port
cd1: drive supports PIO mode 4, DMA mode 2
cd0(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
cd1(viaide0:1:1): using PIO mode 4, DMA mode 2 (using DMA data transfers)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
duplicate IP address 192.168.0.2 sent from link address 00:50:8d:60:2b:bd
duplicate IP address 192.168.0.2 sent from link address 00:50:8d:60:2b:bd
ugen0 at uhub0 port 1
ugen0: Canon Inc. Canon Digital Camera, rev 1.10/0.01, addr 2
 

thor

mama said i am a bad boy
*Sheep, nicht nötig, ist das Teil mächtig genug, drückt es sich durch die Hose ab und ist als Relief zu bestaunen :D
 

thor

mama said i am a bad boy
Vom laufenden System - MAC OS X 10.3.8 auf G4-iBook

Code:
ratbox:~/userspace ratpoison$ dmesg
ITE failed, ASC = 0x64, ASCQ = 0x00
SAM Multimedia: READ or WRITE failed, ASC = 0x64, ASCQ = 0x00
disk1s0: unsupported mode.
SAM Multimedia: READ or WRITE failed, ASC = 0x64, ASCQ = 0x00
disk1s0: unsupported mode.
SAM Multimedia: READ or WRITE failed, ASC = 0x64, ASCQ = 0x00
SAM Multimedia: READ or WRITE failed, ASC = 0x64, ASCQ = 0x00
SAM Multimedia: READ or WRITE failed, ASC = 0x64, ASCQ = 0x00
SAM Multimedia: READ or WRITE failed, ASC = 0x64, ASCQ = 0x00
SAM Multimedia: READ or WRITE failed, ASC = 0x64, ASCQ = 0x00
disk1s0: unsupported mode.
SAM Multimedia: READ or WRITE failed, ASC = 0x64, ASCQ = 0x00
disk1s0: unsupported mode.
AppleNMI mask NMI
AirPort:  Link DOWN 
System Sleep
System Wake
Wake event 0008
AppleNMI unmask NMI
Sound assertion "0 != err" failed in "AppleLegacyAudio/AppleTexas2Audio/AppleTexas2Audio.cpp" at line 960 goto Exit
\^PFWOHCI handleSelfIDInt - nodeID not valid (reset bus and retry 1)
ADB present:8c
AirPort:  Link UP:  "home" - 00095ba86efc - chan 12
AppleNMI mask NMI
AirPort:  Link DOWN 
System Sleep
System Wake
Wake event 0008
AppleNMI unmask NMI
Sound assertion "0 != err" failed in "AppleLegacyAudio/AppleTexas2Audio/AppleTexas2Audio.cpp" at line 960 goto Exit
\^PFWOHCI handleSelfIDInt - nodeID not valid (reset bus and retry 1)
ADB present:8c
AirPort:  Link UP:  "home" - 00095ba86efc - chan 12
AppleNMI mask NMI
AirPort:  Link DOWN 
System Sleep
System Wake
Wake event 0008
AppleNMI unmask NMI
Sound assertion "0 != err" failed in "AppleLegacyAudio/AppleTexas2Audio/AppleTexas2Audio.cpp" at line 960 goto Exit
\^PFWOHCI handleSelfIDInt - nodeID not valid (reset bus and retry 1)
ADB present:8c
AirPort:  Link UP:  "home" - 00095ba86efc - chan 12
AppleNMI mask NMI
AirPort:  Link DOWN 
System Sleep
System Wake
Wake event 0008
AppleNMI unmask NMI
Sound assertion "0 != err" failed in "AppleLegacyAudio/AppleTexas2Audio/AppleTexas2Audio.cpp" at line 960 goto Exit
\^PFWOHCI handleSelfIDInt - nodeID not valid (reset bus and retry 1)
ADB present:8c
AirPort:  Link UP:  "home" - 00095ba86efc - chan 12
AppleNMI mask NMI
AirPort:  Link DOWN 
System Sleep
System Wake
Wake event 0008
AppleNMI unmask NMI
Sound assertion "0 != err" failed in "AppleLegacyAudio/AppleTexas2Audio/AppleTexas2Audio.cpp" at line 960 goto Exit
\^PFWOHCI handleSelfIDInt - nodeID not valid (reset bus and retry 1)
ADB present:8c
AirPort:  Link UP:  "home" - 00095ba86efc - chan 12
AppleNMI mask NMI
AirPort:  Link DOWN 
System Sleep
System Wake
Wake event 0020
Sound assertion "0 != err" failed in "AppleLegacyAudio/AppleTexas2Audio/AppleTexas2Audio.cpp" at line 3633 goto Exit
\^PAppleNMI unmask NMI
Sound assertion "0 != err" failed in "AppleLegacyAudio/AppleTexas2Audio/AppleTexas2Audio.cpp" at line 960 goto Exit
\^PFWOHCI handleSelfIDInt - nodeID not valid (reset bus and retry 1)
USB caused wake event (EHCI)
ADB present:8c
AirPort:  Link UP:  "home" - 00095ba86efc - chan 12
AppleNMI mask NMI
AirPort:  Link DOWN 
System Sleep
System Wake
Wake event 0020
Sound assertion "0 != err" failed in "AppleLegacyAudio/AppleTexas2Audio/AppleTexas2Audio.cpp" at line 3633 goto Exit
\^PAppleNMI unmask NMI
Sound assertion "0 != err" failed in "AppleLegacyAudio/AppleTexas2Audio/AppleTexas2Audio.cpp" at line 960 goto Exit
\^PFWOHCI handleSelfIDInt - nodeID not valid (reset bus and retry 1)
ADB present:8c
AirPort:  Link UP:  "home" - 00095ba86efc - chan 12
AppleNMI mask NMI
AirPort:  Link DOWN 
System Sleep
System Wake
Wake event 0001
AppleNMI unmask NMI
Sound assertion "0 != err" failed in "AppleLegacyAudio/AppleTexas2Audio/AppleTexas2Audio.cpp" at line 960 goto Exit
\^PFWOHCI handleSelfIDInt - nodeID not valid (reset bus and retry 1)
ADB present:8c
AirPort:  Link UP:  "home" - 00095ba86efc - chan 12
AppleNMI mask NMI
AirPort:  Link DOWN 
System Sleep
System Wake
Wake event 0020
AppleNMI unmask NMI
Sound assertion "0 != err" failed in "AppleLegacyAudio/AppleTexas2Audio/AppleTexas2Audio.cpp" at line 960 goto Exit
\^PFWOHCI handleSelfIDInt - nodeID not valid (reset bus and retry 1)
USB caused wake event (EHCI)
ADB present:8c
AirPort:  Link UP:  "home" - 00095ba86efc - chan 12
 

Kathse

fieser Scheinripp
Hm... warum schreibt ihr denn immer dazu, welches OS und welche Hardware? Steht doch alles da, das ist doch der Sinn von dmesg :D

Irix kennt den Befehl leider nicht, daher ein schnödes hinv (Hardware Inventory):

Code:
deeppurple 8% hinv
FPU: MIPS R10010 Floating Point Chip Revision: 0.0
CPU: MIPS R10000 Processor Chip Revision: 2.5
1 175 MHZ IP28 Processor
Main memory size: 192 Mbytes
Secondary unified instruction/data cache size: 1 Mbyte
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Integral SCSI controller 0: Version WD33C93B, revision D
  Disk drive: unit 1 on SCSI controller 0
  Disk drive: unit 2 on SCSI controller 0
  Disk drive: unit 3 on SCSI controller 0
  Disk drive: unit 4 on SCSI controller 0
  Disk drive: unit 5 on SCSI controller 0
  Disk drive: unit 6 on SCSI controller 0
  Disk drive: unit 7 on SCSI controller 0
Integral SCSI controller 1: Version WD33C93B, revision D
  CDROM: unit 6 on SCSI controller 1
On-board serial ports: 2
On-board bi-directional parallel port
Graphics board: Solid Impact
Integral Ethernet: ec0, version 1
Iris Audio Processor: version A2 revision 1.1.0
EISA bus: adapter 0
deeppurple 9%
 

nintendo

Please don't sue us!!
*schniedel auspack*

So, jetzt wird hingehalten ;)

Code:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.11-RELEASE #0: Sat Feb  5 18:28:42 CET 2005
    nintendo@nintendo.home:/usr/src/sys/compile/SMP
Timecounter "i8254"  frequency 1193182 Hz
CPU: AMD Athlon(TM) MP 2000+ (1252.85-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x662  Stepping = 2
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!>
real memory  = 1073659904 (1048496K bytes)
avail memory = 1039704064 (1015336K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard: 2 CPUs
 cpu0 (BSP): apic id:  0, version: 0x00040010, at 0xfee00000
 cpu1 (AP):  apic id:  1, version: 0x00040010, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc0534000.
VESA: v2.0, 262144k memory, flags:0x1, mode table:0xc0492a22 (1000022)
VESA: ATI RADEON 9600 PRO
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 9 entries at 0xc00f24a0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <AMD 762 host to AGP bridge> mem 0xfb800000-0xfb800fff,0xfc000000-0xfdffffff at device 0.0 on pci0
pcib1: <PCI to PCI bridge (vendor=1022 device=700d)> at device 1.0 on pci0
IOAPIC #0 intpin 16 -> irq 2
pci1: <PCI bus> on pcib1
pci1: <ATI model 4150 graphics accelerator> at 5.0 irq 2
pci1: <ATI model 4170 graphics accelerator> at 5.1
isab0: <PCI to ISA bridge (vendor=1022 device=7440)> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 768 ATA100 controller> port 0xb800-0xb80f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
chip0: <PCI to Other bridge (vendor=1022 device=7443)> at device 7.3 on pci0
pcib2: <PCI to PCI bridge (vendor=1022 device=7448)> at device 16.0 on pci0
IOAPIC #0 intpin 19 -> irq 5
IOAPIC #0 intpin 18 -> irq 9
IOAPIC #0 intpin 17 -> irq 10
pci2: <PCI bus> on pcib2
ohci0: <OHCI (generic) USB controller> mem 0xbd000000-0xbd000fff irq 5 at device 0.0 on pci2
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
uhub1: Genesys Logic USB Hub, class 9/0, rev 1.01/0.12, addr 2
uhub1: 4 ports with 4 removable, self powered
ums0: Microsoft Microsoft IntelliMouse\M-. Optical, rev 1.10/1.21, addr 3, iclass 3/1
ums0: 5 buttons and Z dir.
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xa800-0xa87f mem 0xbc800000-0xbc80007f irq 9 at device 5.0 on pci2
xl0: Ethernet address: 00:50:04:60:7f:c6
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
iir0: <ICP Disk Array Controller> mem 0xbf000000-0xbf003fff irq 10 at device 6.0 on pci2
pcm0: <Creative EMU10K1> port 0xa400-0xa41f irq 5 at device 8.0 on pci2
pcm0: <SigmaTel STAC9708/11 AC97 Codec>
orm0: <Option ROMs> at iomem 0xc0000-0xccfff,0xd0000-0xd3fff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: IEEE1284 device found /NIBBLE
Probing for PnP devices on ppbus0:
ppbus0: <Hewlett-Packard HP LaserJet 4ML> HP ENHANCED PCL5,PJL,POSTSCRIPT
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
SMP: AP CPU #1 Launched!
ad0: 76319MB <WDC WD800BB-55HEA0> [155061/16/63] at ata0-master UDMA100
acd0: DVD-R <PIONEER DVD-RW DVR-107D> at ata1-master PIO4
Waiting 2 seconds for SCSI devices to settle
Mounting root from ufs:/dev/ad0s1a
cd0 at iir0 bus 0 target 5 lun 0
cd0: <YAMAHA CRW8424S 1.0f> Removable CD-ROM SCSI-2 device 
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed

..so, jetzt hab ich's euch gezeigt! ;)
 

awecom

New Member
Keine Panik, ist Centrino:

CPU: Intel(R) Pentium(R) M processor 2.00GHz (600.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6d6 Stepping = 6
Features=0xafe9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
real memory = 804192256 (766 MB)
avail memory = 777195520 (741 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <FUJ FJNB186> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xfc08-0xfc0b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel Generic host to PCI bridge> mem 0xd0000000-0xd7ffffff at device 0.0 on pci0
pci0: <base peripheral> at device 0.1 (no driver attached)
pci0: <base peripheral> at device 0.3 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x20c0-0x20df irq 11 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x20e0-0x20ff irq 11 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x2400-0x241f irq 11 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ugen0: ALPS USB BT, rev 1.10/11.68, addr 2
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
cbb0: <PCI-CardBus Bridge> irq 11 at device 10.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <PCI-CardBus Bridge> irq 11 at device 10.1 on pci2
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pci2: <base peripheral> at device 10.2 (no driver attached)
cbb2: <PCI-CardBus Bridge> at device 10.3 on pci2
cardbus2: <CardBus bus> on cbb2
pccard2: <16-bit PCCard bus> on cbb2
bge0: <Broadcom BCM5705M Gigabit Ethernet, ASIC rev. 0x3003> mem 0xc0200000-0xc020ffff irq 11 at device 12.0 on pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5705 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX,auto
bge0: Ethernet address: 00:0b:5d:73:30:4d
bge0: [GIANT-LOCKED]
pci2: <network> at device 13.0 (no driver attached)
fwohci0: <Texas Instruments TSB43AB21/A/AI/A-EP> mem 0xc0210000-0xc0213fff,0xc0216000-0xc02167ff irq 11 at device 14.0 on pci2
fwohci0: [GIANT-LOCKED]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:00:0e:10:02:92:ba:c2
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:00:0e:92:ba:c2
fwe0: Ethernet address: 02:00:0e:92:ba:c2
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0x2440-0x244f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH4 (82801DB)> port 0x2080-0x20bf,0x1800-0x18ff mem 0xc0000800-0xc00008ff,0xc0000c00-0xc0000dff irq 11 at device 31.5 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <Unknown AC97 Codec (id = 0x414c4770)>
pci0: <simple comms> at device 31.6 (no driver attached)
acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_cmbat1: <Control Method Battery> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1 port 0x400-0x43f,0x2e8-0x2ef irq 3 drq 3 on acpi0
sio1: type 16550A
ppc0: <Standard parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <ISA Option ROMs> at iomem 0xdc000-0xdffff,0xc0000-0xcffff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 600024346 Hz quality 800
Timecounters tick every 10.000 msec
ad0: 76319MB <FUJITSU MHT2080AH/006C> [155061/16/63] at ata0-master UDMA100
acd0: DVDR <MATSHITAUJ-820D/1.00> at ata1-master UDMA33
cd0 at ata1 bus 0 target 0 lun 0
cd0: <MATSHITA UJ-820D 1.00> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/ad0s2a
ndis0: <Intel(R) PRO/Wireless 2200BG Network Connection> mem 0xc0215000-0xc0215fff irq 11 at device 13.0 on pci2
ndis0: [GIANT-LOCKED]
ndis0: NDIS API version: 5.1
ndis0: Ethernet address: 00:0e:35:b9:6b:64
ndis0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 5.5Mbps 11Mbps
ndis0: 11g rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
 

dililikima

Satan der Saiten
Nu kommt ein neuer.....

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-CURRENT #1: Fri Dec 31 17:13:25 CET 2004
root@musicman.proxy501.no-ip.com:/usr/obj/usr/src/sys/BEASTIE
ACPI APIC Table: <ASUS A7V8X >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(TM) XP 1800+ (1533.40-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CM
OV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory = 536854528 (511 MB)
avail memory = 511909888 (488 MB)
ioapic0: Changing APIC ID to 2
ioapic0 <Version 0.3> irqs 0-23 on motherboard
bktr_mem: memory holder loaded
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS A7V8X> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 10 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 9 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0
pci_link4: <ACPI PCI Link LNKE> irq 10 on acpi0
pci_link5: <ACPI PCI Link LNKF> irq 15 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 8377 (Apollo KT400/KT400A/KT600) host to PCI bridge> mem 0xf8000000-0
xfbffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
nvidia0: <GeForce2 MX/MX 400> mem 0xf0000000-0xf7ffffff,0xdd000000-0xddffffff ir
q 16 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
bfe0: <Broadcom BCM4401 Fast Ethernet> mem 0xdc800000-0xdc801fff irq 18 at devic
e 9.0 on pci0
miibus0: <MII bus> on bfe0
bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bfe0: Ethernet address: 00:e0:18:a5:f8:80
ahc0: <Adaptec 19160B Ultra160 SCSI adapter> port 0xd800-0xd8ff mem 0xdc000000-0
xdc000fff irq 19 at device 11.0 on pci0
ahc0: [GIANT-LOCKED]
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
pci0: <display, VGA> at device 13.0 (no driver attached)
pcm0: <Creative EMU10K1> port 0xd000-0xd01f irq 17 at device 14.0 on pci0
pcm0: <SigmaTel STAC9708/11 AC97 Codec>
bktr0: <BrookTree 878> mem 0xdf000000-0xdf000fff irq 18 at device 15.0 on pci0
bktr0: [GIANT-LOCKED]
bktr0: Hauppauge Model 61324 D129
bktr0: Detected a MSP3410D-B4 at 0x80
bktr0: Hauppauge WinCast/TV, Philips PAL I tuner, msp3400c stereo, remote contro
l.
pci0: <multimedia> at device 15.1 (no driver attached)
uhci0: <VIA 83C572 USB controller> port 0xb400-0xb41f at device 16.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: AIPTEK International Inc. USB Tablet Series Version 1.04, rev 1.10/1.03, a
ddr 2, iclass 3/1
ums0: 7 buttons and Z dir.
uhci1: <VIA 83C572 USB controller> port 0xb000-0xb01f at device 16.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xa800-0xa81f at device 16.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xdb000000-0xdb0000ff at device 16.3
on pci0
ehci0: [GIANT-LOCKED]
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
ehci_pci_attach: companion usb2
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <VIA VT6202 USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: single transaction translator
uhub3: 6 ports with 6 removable, self powered
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8235 UDMA133 controller> port 0xa400-0xa40f,0x376,0x170-0x177,0x3f
6,0x1f0-0x1f7 at device 17.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
fdc0: <floppy drive controller> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: [FAST]
ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on ac
pi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppbus0: IEEE1284 device found /NIBBLE/ECP
Probing for PnP devices on ppbus0:
ppbus0: <Kyocera FS-1000> PRINTER PCLXL,PCL5E,PJL
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xcc000-0xd1fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1533398114 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 95396MB <WDC WD1000BB-00CCB0/22.04A22> [193821/16/63] at ata0-master UDMA100
acd0: DVDR <TEAC DV-W50E/1.30> at ata1-master UDMA33
Waiting 10 seconds for SCSI devices to settle
ums0: at uhub0 port 2 (addr 2) disconnected
ums0: detached
ums0: AIPTEK International Inc. USB Tablet Series Version 1.04, rev 1.10/1.03, addr 2, iclass 3/1
ums0: 7 buttons and Z dir.
cd0 at ata1 bus 0 target 0 lun 0
cd0: <TEAC DV-W50E 1.30> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present


ciao

dililikima
 

awecom

New Member
okok, dann mal mein guter alter server


Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.7-RELEASE #1: Wed Nov 6 03:52:43 CET 2002
andreas@jupiter.solar:/usr/src/sys/compile/MYKERNEL
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (400.91-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 134217728 (131072K bytes)
avail memory = 125440000 (122500K bytes)
Preloaded elf kernel "kernel" at 0xc050f000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 7 entries at 0xc00fdf00
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xe000-0xe01f irq 11 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at device 7.3 on pci0
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xe400-0xe47f mem 0xe1800000-0xe180007f irq 10 at device 9.0 on pci0
xl0: Ethernet address: 00:04:76:1b:37:4b
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <unknown card> (vendor=0x1244, dev=0x0a00) at 12.0 irq 11
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc87ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad2: 8223MB <ST38420A> [16708/16/63] at ata1-master UDMA33
ad3: 152627MB <SAMSUNG SV1604N> [310101/16/63] at ata1-slave UDMA33
acd0: DVD-ROM <Pioneer DVD-ROM ATAPIModel DVD-104S 0114> at ata0-slave PIO4
Mounting root from ufs:/dev/ad2s1a
$
 

Kathse

fieser Scheinripp
nagut, dann hier die Hauptarbeitskiste ;-)

Code:
bash-2.05b$ dmesg
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE #2: Thu Jan 20 22:52:21 CET 2005
    root@palladium.chaos.lan:/usr/obj/usr/src/sys/BIGRED
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.00GHz (2039.95-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf24  Stepping = 4
  Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory  = 536805376 (511 MB)
avail memory = 511438848 (487 MB)
ACPI APIC Table: <IntelR AWRDACPI>
ioapic0 <Version 2.0> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IntelR AWRDACPI> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82845G host to AGP bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
nvidia0: <GeForce4 MX 440> mem 0xd8000000-0xd807ffff,0xd0000000-0xd7ffffff,0xe4000000-0xe4ffffff irq 16 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xd800-0xd81f irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xd000-0xd01f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xd400-0xd41f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <multimedia> at device 2.0 (no driver attached)
ahc0: <Adaptec 2940 SCSI adapter> port 0xa000-0xa0ff mem 0xe7006000-0xe7006fff irq 21 at device 3.0 on pci2
ahc0: [GIANT-LOCKED]
aic7870: Single Channel A, SCSI Id=7, 16/253 SCBs
pcm0: <CMedia CMI8738> port 0xa400-0xa4ff irq 22 at device 7.0 on pci2
rl0: <RealTek 8139 10/100BaseTX> port 0xa800-0xa8ff mem 0xe7005000-0xe70050ff irq 21 at device 9.0 on pci2
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:50:70:f2:02:ec
atapci0: <Promise PDC20276 UDMA133 controller> port 0xbc00-0xbc0f,0xb800-0xb803,0xb400-0xb407,0xb000-0xb003,0xac00-0xac07 mem 0xe7000000-0xe7003fff irq 18 at device 10.0 on pci2
ata2: channel #0 on atapci0
ata3: channel #1 on atapci0
fwohci0: <VIA Fire II (VT6306)> port 0xc000-0xc07f mem 0xe7007000-0xe70077ff irq 21 at device 11.0 on pci2
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:11:06:00:57:fb:03:64
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:11:06:fb:03:64
fwe0: Ethernet address: 02:11:06:fb:03:64
fwe0: if_start running deferred for Giant
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH4 UDMA100 controller> port 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci1
ata1: channel #1 on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
orm0: <ISA Option ROM> at iomem 0xd0000-0xd07ff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2039945256 Hz quality 800
Timecounters tick every 10.000 msec
ad0: 38166MB <ST340810A/3.34> [77545/16/63] at ata0-master UDMA100
ad1: 114473MB <ST3120026A/3.06> [232581/16/63] at ata0-slave UDMA100
acd0: DVDR <NEC DVD RW ND-1300A/1.06> at ata1-master UDMA33
Waiting 15 seconds for SCSI devices to settle
cd0 at ata1 bus 0 target 0 lun 0
cd0: <_NEC DVD_RW ND-1300A 1.06> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/ad0s3a
NVRM: detected agp.ko, aborting NVIDIA AGP setup!
NVRM: detected agp.ko, aborting NVIDIA AGP setup!
ntfs_strategy: ntfs_readattr failed
ntfs_strategy: ntfs_readattr failed
netsmb_dev: loaded
bash-2.05b$
 

cheasy

SysAdm*n from Hell
Meiner ist kleiner ...

Mein Schniedel ist kleiner:
Code:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.3-STABLE #6: Mon Jan 24 19:36:23 CET 2005
    so@schachtelchen.local:/usr/obj/usr/src/sys/SOEKRIS-net4801
Timecounter "i8254" frequency 1193182 Hz quality 0
[B]CPU: Geode(TM) Integrated Processor by National Semi (266.66-MHz 586-class CPU)[/B]
  Origin = "Geode by NSC"  Id = 0x540  Stepping = 0
  Features=0x808131<FPU,TSC,MSR,CX8,CMOV,MMX>
real memory  = 134217728 (128 MB)
avail memory = 125992960 (120 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0xe100-0xe1ff mem 0xa0000000-0xa0000fff irq 10 at device 6.0 on pci0
sis0: Silicon Revision: DP83816A
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: Ethernet address: 00:00:24:c2:9e:a0
sis1: <NatSemi DP8381[56] 10/100BaseTX> port 0xe200-0xe2ff mem 0xa0001000-0xa0001fff irq 10 at device 7.0 on pci0
sis1: Silicon Revision: DP83816A
miibus1: <MII bus> on sis1
ukphy1: <Generic IEEE 802.3u media interface> on miibus1
ukphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis1: Ethernet address: 00:00:24:c2:9e:a1
sis2: <NatSemi DP8381[56] 10/100BaseTX> port 0xe300-0xe3ff mem 0xa0002000-0xa0002fff irq 10 at device 8.0 on pci0
sis2: Silicon Revision: DP83816A
miibus2: <MII bus> on sis2
ukphy2: <Generic IEEE 802.3u media interface> on miibus2
ukphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis2: Ethernet address: 00:00:24:c2:9e:a2
Geode GPIO@ = 6100
[B]Soekris Engineering NET4801 platform[/B]
isab0: <PCI-ISA bridge> port 0x6200-0x623f,0x6100-0x613f at device 18.0 on pci0
isa0: <ISA bus> on isab0
pci0: <bridge, PCI-unknown> at device 18.1 (no driver attached)
atapci0: <National Geode SC1100 ATA33 controller> port 0xe000-0xe00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 18.2 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
Geode CBA@ 0x6000
Geode rev: 06 03
Timecounter "Geode" frequency 27000000 Hz quality 1000
pci0: <bridge, PCI-unknown> at device 18.5 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xa0003000-0xa0003fff irq 11 at device 19.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x0e11) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
cpu0 on motherboard
orm0: <ISA Option ROM> at iomem 0xc8000-0xd1fff on isa0
pmtimer0 on isa0
ppc0: parallel port not found.
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
Timecounters tick every 10.000 msec
ad0: 57231MB <IC25N060ATMR04-0/MO3OAD4A> [116280/16/63] at ata0-master UDMA33
 

Elessar

Huldigt dem _/\_
Loki: [Arbeitstier]
Code:
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE-p2 #1: Tue Dec 21 20:28:40 CET 2004
    root@loki.starkstrom.lan:/usr/obj/usr/src/sys/LOKI
MPTable: <OEM00000 PROD00000000>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) III CPU family      1400MHz (1399.54-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6b1  Stepping = 1
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 1610612736 (1536 MB)
avail memory = 1568600064 (1495 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Assuming intbase of 0
ioapic0 <Version 1.1> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xe8000000-0xebffffff at device 0.0 on pci0
pcib1: <MPTable PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686B UDMA100 controller> port 0xd800-0xd80f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 11 at device 7.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 11 at device 7.3 on pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 7.4 (no driver attached)
pcib2: <MPTable PCI-PCI bridge> at device 9.0 on pci0
pci2: <PCI bus> on pcib2
fxp0: <Intel 82558 Pro/100 Ethernet> port 0xc000-0xc01f mem 0xf2000000-0xf20fffff,0xf4800000-0xf4800fff irq 10 at device 4.0 on pci2
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:50:8b:68:a0:18
fxp1: <Intel 82558 Pro/100 Ethernet> port 0xc400-0xc41f mem 0xf2100000-0xf21fffff,0xf4801000-0xf4801fff irq 11 at device 5.0 on pci2
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: Ethernet address: 00:50:8b:68:a0:19
pcib3: <PCI-PCI bridge> at device 10.0 on pci0
pci3: <PCI bus> on pcib3
mlx0: <Mylex version 4 RAID interface> mem 0xf4000000-0xf47fffff irq 11 at device 10.1 on pci0
mlx0: [GIANT-LOCKED]
mlx0: DAC960PTL1, 1 channel, firmware 4.08-0-33, 8MB RAM
mlxd0: <Mylex System Drive> on mlx0
mlxd0: 34732MB (71131136 sectors) RAID 5 (online)
pcm0: <Creative EMU10K1> port 0xdc00-0xdc1f irq 9 at device 12.0 on pci0
pcm0: <TriTech TR28602 AC97 Codec>
cpu0 on motherboard
cpu1 on motherboard
orm0: <ISA Option ROMs> at iomem 0xcc000-0xce7ff,0xc0000-0xc87ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model MouseMan+, device ID 0
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0400> can't assign resources (port)
Timecounters tick every 1.200 msec
Fast IPsec: Initialized Security Association Processing.
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/mlxd0s2a

Fenris: [NAT Gateway]
Code:
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE #0: Mon Nov  8 03:20:30 CET 2004
    root@fenris.starkstrom.lan:/usr/obj/usr/src/sys/FENRIS
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (737.02-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x683  Stepping = 3
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 267300864 (254 MB)
avail memory = 251924480 (240 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS CUSL2> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
cpu0: <ACPI CPU (2 Cx states)> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82815 (i815 GMCH) SVGA controller> mem 0xf6000000-0xf607ffff,0xf8000000-0xfbffffff irq 11 at device 2.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <PCI-PCI bridge> at device 9.0 on pci1
pci2: <PCI bus> on pcib2
mlx0: <Mylex version 4 RAID interface> mem 0xf7000000-0xf7001fff irq 10 at device 9.1 on pci1
mlx0: [GIANT-LOCKED]
mlx0: DAC960PJ, 3 channels, firmware 4.08-0-33, 64MB RAM
mlxd0: <Mylex System Drive> on mlx0
mlxd0: 26145MB (53544960 sectors) RAID 0 (online)
mlxd1: <Mylex System Drive> on mlx0
mlxd1: 17494MB (35827712 sectors) RAID 5 (online)
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xd800-0xd83f mem 0xf4800000-0xf48fffff,0xf5000000-0xf5000fff irq 9 at device 11.0 on pci1
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:90:27:8f:df:05
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xd400-0xd47f mem 0xf4000000-0xf400007f irq 5 at device 12.0 on pci1
miibus1: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus1
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:04:75:8c:8e:51
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 UDMA100 controller> port 0xb800-0xb80f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
fdc0: <floppy drive controller> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: [FAST]
sio0: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x3e8-0x3ef irq 4 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd07ff,0xcc000-0xce7ff,0xc0000-0xcbfff on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 737023283 Hz quality 800
Timecounters tick every 1.200 msec
IPv6 packet filtering initialized, default to accept, logging limited to 100 packets/entry
Fast IPsec: Initialized Security Association Processing.
ipfw2 initialized, divert enabled, rule-based forwarding disabled, default to accept, logging limited to 100 packets/entry by default
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
Mounting root from ufs:/dev/mlxd0s1a

Exxtasy: [Surfer]
Code:
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE-p5 #0: Wed Feb  9 01:01:38 CET 2005
    root@exxtasy.starkstrom.lan:/usr/obj/usr/src/sys/EXXTASY
MPTable: <ASUSTek  P4P800-VM   >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2793.01-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf33  Stepping = 3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Hyperthreading: 2 logical CPUs
real memory  = 1071841280 (1022 MB)
avail memory = 1043517440 (995 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
Security policy loaded: TrustedBSD MAC/BSD Extended (mac_bsdextended)
Security policy loaded: TrustedBSD MAC/seeotheruids (mac_seeotheruids)
Security policy loaded: TrustedBSD MAC/ifoff (mac_ifoff)
ioapic0: Assuming intbase of 0
ioapic0 <Version 2.0> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82865G (865G GMCH) SVGA controller> port 0xefe0-0xefe7 mem 0xfe780000-0xfe7fffff,0xf0000000-0xf7ffffff irq 16 at device 2.0 on pci0
agp0: detected 892k stolen memory
agp0: aperture size is 128M
pci0: <serial bus, USB> at device 29.0 (no driver attached)
pci0: <serial bus, USB> at device 29.1 (no driver attached)
pcib1: <MPTable PCI-PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib1
fxp0: <Intel 82801BA (D865) Pro/100 VE Ethernet> port 0xdf00-0xdf3f mem 0xfe5ff000-0xfe5fffff irq 20 at device 8.0 on pci1
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:11:2f:0b:6c:67
atapci0: <HighPoint HPT370 UDMA100 controller> port 0xd800-0xd8ff,0xdfa8-0xdfab,0xdfa0-0xdfa7,0xdfac-0xdfaf,0xdfe0-0xdfe7 irq 22 at device 11.0 on pci1
ata2: channel #0 on atapci0
ata3: channel #1 on atapci0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH5 UDMA100 controller> port 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci1
ata1: channel #1 on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
cpu0 on motherboard
cpu1 on motherboard
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
Timecounters tick every 10.000 msec
Fast IPsec: Initialized Security Association Processing.
ipfw2 initialized, divert disabled, rule-based forwarding disabled, default to accept, logging unlimited
ad4: 117800MB <IC35L120AVV207-1/V24OA66A> [239340/16/63] at ata2-master UDMA100
ad6: 117800MB <HDS722512VLAT80/V33OA6EA> [239340/16/63] at ata3-master UDMA100
ar0: 117800MB <ATA RAID1 array> [15017/255/63] status: READY subdisks:
 disk0 READY on ad6 at ata3-master
 disk1 READY on ad4 at ata2-master
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/ar0s1a

Mjoelnir: [Schlepptop]
Code:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.3-STABLE #1: Wed Feb  2 04:57:49 CET 2005
    root@mjoelnir.starkstrom.lan:/usr/obj/usr/src/sys/MJOELNIR
Timecounter "i8254" frequency 1193097 Hz quality 0
CPU: Pentium II/Pentium II Xeon/Celeron (298.40-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x652  Stepping = 2
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 134021120 (127 MB)
avail memory = 121503744 (115 MB)
acpi0: <IBM TP600> on motherboard
acpi0: Power Button (fixed)
acpi_ec0: <Embedded Controller: GPE 0x9> port 0x66,0x62 on acpi0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xef08-0xef0b on acpi0
cpu0: <ACPI CPU (2 Cx states)> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
cbb0: <TI1250 PCI-CardBus Bridge> mem 0x20301000-0x20301fff at device 2.0 on pci0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <TI1250 PCI-CardBus Bridge> mem 0x20300000-0x20300fff at device 2.1 on pci0
pccard1: <16-bit PCCard bus> on cbb1
acpi_video0: <ACPI video extension> mem 0x20200000-0x202fffff,0x20000000-0x201fffff,0xe0000000-0xe0ffffff irq 11 at device 3.0 on pci0
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xfcf0-0xfcff,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x8400-0x841f irq 10 at device 7.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_tz2: <Thermal Zone> on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fd1: <1440-KB 3.5" drive> on fdc0 drive 1
ppc0: <Standard parallel printer port> port 0x3bc-0x3bf irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
orm0: <ISA Option ROM> at iomem 0xc0000-0xc9fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 298401948 Hz quality 800
Timecounters tick every 1.200 msec
Fast IPsec: Initialized Security Association Processing.
Interrupt storm detected on "irq10: cbb1 uhci0"; throttling interrupt source
ep0: <3Com 3C574-TX Fast EtherLink PC Card> at port 0x100-0x11f irq 11 function 0 config 1 on pccard0
Unknown ID: 0x201
ep0: Ethernet address: 00:60:08:b6:49:b8
ad0: 4887MB <IBM-DADA-25120/AD5IA48A> [10592/15/63] at ata0-master UDMA33
Mounting root from ufs:/dev/ad0s1a
 
Zuletzt bearbeitet:

brundlefliege

dislikes hats
NetBSD=Ästhetik

NetBSD 2.0 (GENERIC) #0: Wed Dec 1 10:58:25 UTC 2004
builds@build:/big/builds/ab/netbsd-2-0-RELEASE/i386/200411300000Z-obj/big/builds/ab/netbsd-2-0-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory = 511 MB5 13:39:39 2005
avail memory = 493 MB#0: Wed Dec 1 10:58:25 UTC 2004
BIOS32 rev. 0 found at 0xfbc30
mainbus0 (root)SD!
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon XP 2800+ (686-class), 2079.67 MHz, id 0x6a0
cpu0: features c3c3fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features c3c3fbff<PGE,MCA,CMOV,PAT,PSE36,MMXX,MMX>
cpu0: features c3c3fbff<FXSR,SSE,3DNOW2,3DNOW>
cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu0: L2 cache 512 KB 64B/line 16-way
cpu0: ITLB 16 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries 4-way
cpu0: 8 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Nvidia Corporation nForce2 Host-PCI Bridge (rev. 0xc1)
agp at pchb0 not configured
Nvidia Corporation nForce2 Memory Controller (RAM memory, revision 0xc1) at pci0 dev 0 function 1 not configured
Nvidia Corporation nForce2 Memory Controller (RAM memory, revision 0xc1) at pci0 dev 0 function 2 not configured
Nvidia Corporation nForce2 Memory Controller (RAM memory, revision 0xc1) at pci0 dev 0 function 3 not configured
Nvidia Corporation nForce2 Memory Controller (RAM memory, revision 0xc1) at pci0 dev 0 function 4 not configured
Nvidia Corporation nForce2 Memory Controller (RAM memory, revision 0xc1) at pci0 dev 0 function 5 not configured
pcib0 at pci0 dev 1 function 0
pcib0: Nvidia Corporation nForce2 PCI-ISA bridge (rev. 0xa4)
Nvidia Corporation nForce2 SMBus Controller (SMBus serial bus, revision 0xa2) at pci0 dev 1 function 1 not configured
ohci0 at pci0 dev 2 function 0: Nvidia Corporation nForce2 USB Host Controller (rev. 0xa4)
ohci0: interrupting at irq 11
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Nvidia Corporat OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 2 function 1: Nvidia Corporation nForce2 USB Host Controller (rev. 0xa4)
ohci1: interrupting at irq 3
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Nvidia Corporat OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ehci0 at pci0 dev 2 function 2: Nvidia Corporation nForce2 USB2 Host Controller (rev. 0xa4)
ehci0: interrupting at irq 5
ehci0: EHCI version 1.0
ehci0: companion controllers, 4 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: Nvidia Corporat EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
Nvidia Corporation nForce2 Ethernet (ethernet network, revision 0xa1) at pci0 dev 4 function 0 not configured
ppb0 at pci0 dev 8 function 0: Nvidia Corporation nForce2 PCI-PCI bridge (rev. 0xa3)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
ne2 at pci1 dev 10 function 0: Realtek 8029 Ethernet
ne2: Ethernet address 52:54:05:c1:0e:6c
ne2: 10base2, 10baseT, 10baseT-FDX, auto, default [0x00 0x30] auto
ne2: interrupting at irq 11
satalink0 at pci1 dev 11 function 0
satalink0: Silicon Image SATALink 3112 (rev. 0x02)
satalink0: SATALink BA5 register space disabled
satalink0: bus-master DMA support present
satalink0: primary channel wired to native-PCI mode
satalink0: using irq 11 for native-PCI interrupt
atabus0 at satalink0 channel 0
satalink0: secondary channel wired to native-PCI mode
atabus1 at satalink0 channel 1
viaide0 at pci0 dev 9 function 0
viaide0: NVIDIA nForce2 IDE Controller (rev. 0xa2)
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at irq 14
atabus2 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at irq 15
atabus3 at viaide0 channel 1
ppb1 at pci0 dev 30 function 0: Nvidia Corporation nForce2 PCI-PCI Bridge (rev. 0xc1)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
vga1 at pci2 dev 0 function 0: Nvidia Corporation GeForce2 MX (rev. 0xa1)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
Kernelized RAIDframe activated
satalink0: port 0: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0: <SAMSUNG SP1614C>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 7
wd0(satalink0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA data transfers)
wd1 at atabus2 drive 0: <Maxtor 6Y080P0>
wd1: drive supports 16-sector PIO transfers, LBA addressing
wd1: 78167 MB, 158816 cyl, 16 head, 63 sec, 512 bytes/sect x 160086528 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA data transfers)
boot device: wd1
root on wd1a dumps on wd1b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
 

Pointer

Member
Code:
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE-p5 #3: Tue Feb 15 12:10:06 CET 2005
    [email]root@pointer.dyndns.org[/email]:/usr/obj/usr/src/sys/SERVER
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium/P55C (167.05-MHz 586-class CPU)
  Origin = "GenuineIntel"  Id = 0x543  Stepping = 3
  Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory  = 67108864 (64 MB)
avail memory = 60252160 (57 MB)
Intel Pentium detected, installing workaround for F00F bug
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 7 Entries> on motherboard
pci0: <PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <serial bus, USB> at device 7.2 (no driver attached)
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
pci0: <display, VGA> at device 15.0 (no driver attached)
cpu0 on motherboard
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ep0: <3Com 3C509-Combo EtherLink III> at port 0x300-0x30f irq 3 on isa0
ep0: Ethernet address: 00:a0:24:47:7e:25
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0a03> can't assign resources (port)
Timecounter "TSC" frequency 167046518 Hz quality 800
Timecounters tick every 10.000 msec
ad0: 3093MB <FUJITSU MPB3032ATU E/4010> [6704/15/63] at ata0-master UDMA33
ad1: 1668MB <FUJITSU MPA3017ATU/9515> [3390/16/63] at ata0-slave UDMA33
Mounting root from ufs:/dev/ad0s1a
 

Yamagi

Possessed With Psi Powers
Teammitglied
FreeBSD 5.3 auf Athlon64 3200+ Ja ich weiß, dass es drinsteht ;) Mein Server folgt, sobald er fertig ist!

Code:
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE #6: Sat Feb 12 17:32:37 CET 2005
    ooze@hellelevator.horst.lan:/usr/src/sys/i386/compile/HELLELEVATOR
ACPI APIC Table: <A M I  OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3200+ (2002.57-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0xf48  Stepping = 8
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  AMD Features=0xe0500000<NX,AMIE,LM,DSP,3DNow!>
real memory  = 1072889856 (1023 MB)
avail memory = 1036161024 (988 MB)
ioapic0: Changing APIC ID to 1
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 0.3> irqs 0-23 on motherboard
netsmb_dev: loaded
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <A M I OEMXSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 8385 host to PCI bridge> mem 0xe0000000-0xefffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P1 - AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
nvidia0: <GeForce 6800 GT> mem 0xfb000000-0xfbffffff,0xc0000000-0xcfffffff,0xfc000000-0xfcffffff irq 16 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
fwohci0: <VIA Fire II (VT6306)> port 0xcc00-0xcc7f mem 0xfd900000-0xfd9007ff irq 16 at device 7.0 on pci0
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:e0:18:00:00:5f:b4:5a
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
atapci0: <Promise PDC20378 SATA150 controller> port 0xdc00-0xdc7f,0xec00-0xec0f,0xa000-0xa03f mem 0xfda00000-0xfda1ffff,0xfdb00000-0xfdb00fff irq 18 at device 8.0 on pci0
atapci0: failed: rid 0x20 is memory, requested 4
ata2: channel #0 on atapci0
ata3: channel #1 on atapci0
ata4: channel #2 on atapci0
skc0: <3Com 3C940 Gigabit Ethernet> port 0xa400-0xa4ff mem 0xfdc00000-0xfdc03fff irq 17 at device 10.0 on pci0
skc0: 3Com Gigabit LOM (3C940)
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:0e:a6:68:ae:0f
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
bktr0: <BrookTree 878> mem 0xdfe00000-0xdfe00fff irq 18 at device 13.0 on pci0
bktr0: [GIANT-LOCKED]
bktr0: Warning - card vendor 0x11bd (model 0x0012) unknown.
bktr0: Detected a MSP3410G-B11 at 0x80
bktr0: Pinnacle/Miro TV, Philips PAL I tuner, msp3400c stereo.
pci0: <multimedia> at device 13.1 (no driver attached)
pcm0: <Creative Audigy (EMU10K2)> port 0xa800-0xa81f irq 19 at device 14.0 on pci0
pcm0: <TriTech TR28602 AC97 Codec>
fwohci1: <1394 Open Host Controller Interface> mem 0xfdd00000-0xfdd03fff,0xfde00000-0xfde007ff irq 16 at device 14.2 on pci0
fwohci1: OHCI version 1.10 (ROM=0)
fwohci1: No. of Isochronous channels is 4.
fwohci1: EUI64 00:02:3c:00:20:02:a9:9e
fwohci1: Phy 1394a available S400, 2 ports.
fwohci1: Link S400, max_rec 2048 bytes.
firewire1: <IEEE1394(FireWire) bus> on fwohci1
fwohci1: Initiate bus reset
fwohci1: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire1: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire1: bus manager 0 (me)
atapci1: <VIA 6420 SATA150 controller> port 0xc800-0xc8ff,0xd000-0xd00f,0xd400-0xd403,0xd800-0xd807,0xe000-0xe003,0xe400-0xe407 irq 20 at device 15.0 on pci0
ata5: channel #0 on atapci1
ata6: channel #1 on atapci1
atapci2: <VIA 8237 UDMA133 controller> port 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0
ata0: channel #0 on atapci2
ata1: channel #1 on atapci2
uhci0: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 21 at device 16.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Microsoft Microsoft Wheel Mouse Optical®, rev 1.10/1.21, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
uhci1: <VIA 83C572 USB controller> port 0xb800-0xb81f irq 21 at device 16.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xc000-0xc01f irq 21 at device 16.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 21 at device 16.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xfdf00000-0xfdf000ff irq 21 at device 16.4 on pci0
ehci0: [GIANT-LOCKED]
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
ehci_pci_attach: companion usb2
ehci_pci_attach: companion usb3
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2002568564 Hz quality 800
Timecounters tick every 10.000 msec
acd0: DVDROM <SAMSUNG DVD-ROM SD-616F/F101> at ata0-master UDMA33
acd1: DVDR <TEAC DV-W58G-A/U4S2> at ata1-master UDMA33
ad4: 78167MB <Maxtor 6Y080M0/YAR51EW0> [158816/16/63] at ata2-master SATA150
ad6: 78167MB <Maxtor 6Y080M0/YAR51EW0> [158816/16/63] at ata3-master SATA150
ar0: 156334MB <ATA RAID0 array> [19929/255/63] status: READY subdisks:
 disk0 READY on ad4 at ata2-master
 disk1 READY on ad6 at ata3-master
ums0: at uhub0 port 1 (addr 2) disconnected
ums0: detached
ums0: Microsoft Microsoft Wheel Mouse Optical®, rev 1.10/1.21, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
Mounting root from ufs:/dev/ar0s1a
 

krumel

Keksrest
Einmal die Desktop Dose [FreeBSD 5.2.1 @ Intel Celeron 1400]
Code:
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #1: Mon Mar  8 16:35:51 CET 2004
    root@krumel.rpg-scene.net:/space/src/sys/i386/compile/KERNELKRUMEL
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0cdc000.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc0cdc26c.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc0cdc318.
Preloaded elf module "/boot/kernel/snd_cmi.ko" at 0xc0cdc3c4.
Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc0cdc470.
Preloaded elf module "/boot/modules/nvidia.ko" at 0xc0cdc51c.
Preloaded elf module "/boot/kernel/if_acx.ko" at 0xc0cdc5c8.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0cdc674.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(TM) CPU                1400MHz (1413.93-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6b1  Stepping = 1
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 536784896 (511 MB)
avail memory = 507547648 (484 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS   TUSL2-C > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 11 entries at 0xc00f13a0
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 31 INTD is routed to irq 9
pcib0: slot 31 INTB is routed to irq 10
pcib0: slot 31 INTC is routed to irq 9
agp0: <Intel 82815 (i815 GMCH) host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib1: slot 0 INTA is routed to irq 11
nvidia0: <GeForce FX 5900XT> mem 0xf0000000-0xf7ffffff,0xee000000-0xeeffffff irq 11 at device 0.0 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib2: slot 7 INTA is routed to irq 5
pcib2: slot 11 INTA is routed to irq 9
pcib2: slot 13 INTA is routed to irq 9
pcm0: <CMedia CMI8738> port 0xd800-0xd8ff irq 5 at device 7.0 on pci2
rl0: <RealTek 8139 10/100BaseTX> port 0xd400-0xd4ff mem 0xed800000-0xed8000ff irq 9 at device 11.0 on pci2
rl0: Ethernet address: 00:50:fc:59:e4:48
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
acx0: <Texas Instruments (TI) 802.11b+ 22Mbps Wireless Adapter> port 0xd000-0xd01f mem 0xec800000-0xec80ffff,0xed000000-0xed000fff irq 9 at device 13.0 on pci2
acx0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 22Mbps
acx0: 802.11 address: 00:80:c8:00:6d:77
acx0: Eeprom Rev 4 Domain ETSI Europe (1-13), Firmware Rev 1.9.8.b
acx0: Radio Type 0x11, Antenna 0x8f, CCA Mode 0x0d, ED Threshold 0x70
acx0: (c) http://wlan.kewl.org/ 2003
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 UDMA100 controller> port 0xb800-0xb80f at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xb400-0xb41f irq 9 at device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/13.20, addr 2, iclass 3/1
ums0: 4 buttons and Z dir.
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xb000-0xb01f irq 9 at device 31.4 on pci0
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
orm0: <Option ROMs> at iomem 0xd0000-0xd3fff,0xc0000-0xcf7ff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1413926939 Hz quality 800
Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=0xc4beda60
ad0: 114473MB <ST3120026A> [232581/16/63] at ata0-master UDMA100
GEOM: create disk ad1 dp=0xc4bed960
ad1: 39083MB <Maxtor 34098H4> [79408/16/63] at ata0-slave UDMA100
acd0: CDRW <CD-W516EB> at ata1-master PIO4
acd1: CDROM <CRD-8520B> at ata1-slave PIO4
Mounting root from ufs:/dev/ad0s1a

Und mein Rechner zum rumspielen [NetBSD 2.0 @ AMD K6-2 400]
Code:
NetBSD 2.0 (GENERIC) #0: Wed Dec  1 10:58:25 UTC 2004
        builds@build:/big/builds/ab/netbsd-2-0-RELEASE/i386/200411300000Z-obj/big/builds/ab/netbsd-2-0-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory = 255 MB
avail memory = 242 MB
BIOS32 rev. 0 found at 0xf0690
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD K6-2 (586-class), 400.92 MHz, id 0x58c
cpu0: features 8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
cpu0: features 8021bf<PGE,MMX>
cpu0: I-cache 32 KB 32B/line 2-way, D-cache 32 KB 32B/line 2-way
cpu0: ITLB 64 4 KB entries direct-mapped
cpu0: DTLB 128 4 KB entries 2-way
cpu0: 4 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Acer Labs M1541 Host-PCI Bridge (rev. 0x04)
agp0 at pchb0: aperture at 0xe0000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: Acer Labs M5243 PCI-AGP Bridge (rev. 0x04)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: Nvidia Corporation RIVA TNT (rev. 0x04)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
Acer Labs M7101 Power Management Controller (miscellaneous bridge) at pci0 dev 3 function 0 not configured
pcib0 at pci0 dev 7 function 0
pcib0: Acer Labs M1543 PCI-ISA Bridge (rev. 0xc3)
ne2 at pci0 dev 10 function 0: Realtek 8029 Ethernet
ne2: Ethernet address 00:00:e8:69:79:7f
ne2: 10base2, 10baseT, 10baseT-FDX, auto, default [0x00 0x30] auto
ne2: interrupting at irq 12
ne3 at pci0 dev 11 function 0: Realtek 8029 Ethernet
ne3: Ethernet address 00:20:18:2c:76:5d
ne3: 10base2, 10baseT, 10baseT-FDX, auto, default [0x03 0x70] auto
ne3: interrupting at irq 10
aceride0 at pci0 dev 15 function 0
aceride0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc1)
aceride0: bus-master DMA support present
aceride0: primary channel configured to compatibility mode
aceride0: primary channel interrupting at irq 14
atabus0 at aceride0 channel 0
aceride0: secondary channel configured to compatibility mode
aceride0: secondary channel interrupting at irq 15
atabus1 at aceride0 channel 1
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
sb0 at isa0 port 0x220-0x237 irq 5 drq 1: dsp v3.01
audio0 at sb0: half duplex, mmap, independent
midi0 at sb0: SB MIDI UART
opl0 at sb0: model OPL3
midi1 at opl0: SB Yamaha OPL3
pcppi0 at isa0 port 0x61
midi2 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
fd0 at fdc0 drive 0: 1.2MB, 80 cyl, 2 head, 15 sec
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <IBM-DTTA-351010>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 9671 MB, 19650 cyl, 16 head, 63 sec, 512 bytes/sect x 19807200 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd1 at atabus0 drive 1: <WDC AC21200H>
wd1: drive supports 16-sector PIO transfers, LBA addressing
wd1: 1222 MB, 2484 cyl, 16 head, 63 sec, 512 bytes/sect x 2503872 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2
wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
wd1(aceride0:0:1): using PIO mode 4, DMA mode 2 (using DMA data transfers)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <SAMSUNG CD-ROM SC-152G, , C400> cdrom removable
cd0: 32-bit data port
aceride0:1:0: lost interrupt
        type: ata tc_bcount: 0 tc_skip: 0
cd0(aceride0:1:0): using PIO mode 3
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wd0: transfer error, downgrading to Ultra-DMA mode 1
wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 1 (using DMA data transfers)
wd1(aceride0:0:1): using PIO mode 4, DMA mode 2 (using DMA data transfers)
wd0a: DMA error reading fsbn 93024 of 93024-93039 (wd0 bn 93087; cn 92 tn 5 sn 36), retrying
wd0: soft error (corrected)
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
 

AceX5

Well-Known Member
NetBSD 2.0 auf meinem iBook G4:

Code:
NetBSD 2.0 (GENERIC) #0: Wed Dec  1 14:03:55 UTC 2004
        builds@build:/big/builds/ab/netbsd-2-0-RELEASE/macppc/200411300000Z-obj/big/builds/ab/netbsd-2-0-RELEASE/src/sys/arch/macppc/compile/GENERIC
total memory = 512 MB
avail memory = 487 MB
mainbus0 (root)
cpu0 at mainbus0: Version 0x8003 (Revision 0x0102), ID 0 (primary)
cpu0: HID0 8410c0bc<EMCP,EICE,DPM,ICE,DCE,SGE,BTIC,FBIOB,ABE,BHT>
cpu0: 668.73 MHz, 256KB L2 cache
uninorth0 at mainbus0
pci0 at uninorth0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0
pchb0: Apple Computer UniNorth AGP Bridge (rev. 0x00)
ofb0 at pci0 dev 16 function 0: ATI Technologies product 0x5c63
ofb0: 1024 x 768, 8bpp
wsdisplay0 at ofb0 kbdmux 1: console (std, vt100 emulation)
wsmux1: connecting to wsdisplay0
uninorth1 at mainbus0
pci1 at uninorth1 bus 0
pci1: i/o space, memory space enabled
pchb1 at pci1 dev 11 function 0
pchb1: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00)
Broadcom Corporation product 0x4320 (miscellaneous network, revision 0x03) at pci1 dev 18 function 0 not configured
obio0 at pci1 dev 23 function 0: addr 0x80000000
zsc0 at obio0 offset 0x13000: irq 22,23
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
i2s at obio0 offset 0x10000 not configured
adb0 at obio0 offset 0x16000 irq 47: 3 targets
aed0 at adb0 addr 0: ADB Event device
akbd0 at adb0 addr 2: mapped device (196)
wskbd0 at akbd0: console keyboard, using wsdisplay0
ams0 at adb0 addr 3: EMP trackpad <tpad> 4-button, 400 dpi
wsmouse0 at ams0 mux 0
abtn0 at adb0 addr 7: buttons
apm0 at adb0: battery flags 0x5, 44% charged
battery at obio0 offset 0x0 not configured
backlight at obio0 offset 0xf300 not configured
wdc0 at obio0 offset 0x20000 irq 24: DMA transfer
atabus0 at wdc0 channel 0
ohci0 at pci1 dev 24 function 0: Apple Computer product 0x003f (rev. 0x00)
ohci0: can't map mem space
ohci1 at pci1 dev 25 function 0: Apple Computer product 0x003f (rev. 0x00)
ohci1: can't map mem space
ohci2 at pci1 dev 26 function 0: Apple Computer product 0x003f (rev. 0x00)
ohci2: interrupting at irq 29
ohci2: OHCI version 1.0, legacy support
usb0 at ohci2: USB revision 1.0
uhub0 at usb0
uhub0: Apple Computer OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci3 at pci1 dev 27 function 0: NEC USB Host Controller (rev. 0x43)
ohci3: interrupting at irq 63
ohci3: OHCI version 1.0
usb1 at ohci3: USB revision 1.0
uhub1 at usb1
uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ohci4 at pci1 dev 27 function 1: NEC USB Host Controller (rev. 0x43)
ohci4: interrupting at irq 63
ohci4: OHCI version 1.0
usb2 at ohci4: USB revision 1.0
uhub2 at usb2
uhub2: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
NEC USB Host Controller (USB serial bus, interface 0x20, revision 0x04) at pci1 dev 27 function 2 not configured
uninorth2 at mainbus0
pci2 at uninorth2 bus 0
pci2: i/o space, memory space enabled
pchb2 at pci2 dev 11 function 0
pchb2: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00)
wdc1 at pci2 dev 13 function 0: interrupting at irq 39
atabus1 at wdc1 channel 0
fwohci0 at pci2 dev 14 function 0: Apple Computer UniNorth Firewire (rev. 0x81)
fwohci0: interrupting at irq 40
fwohci0: OHCI 1.1, 00:0d:93:ff:fe:4a:12:48, 400Mb/s, 2048 max_rec, 8 ir_ctx, 8 it_ctx
gem0 at pci2 dev 15 function 0: Apple Computer GMAC Ethernet (rev. 0x80)
gem0: interrupting at irq 41
gem0: Ethernet address 00:0d:93:4a:12:48, 10KB RX fifo, 4KB TX fifo
bmtphy0 at gem0 phy 0: BCM5221 10/100 media interface, rev. 4
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fw0 at fwohci0: 00:0d:93:ff:fe:4a:12:48:0a:02:ff:ff:f0:01:00:00
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <MATSHITACD-RW  CW-8123, , CA10> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(wdc0:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
wd0 at atabus1 drive 0: <TOSHIBA MK6025GAS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 57231 MB, 116280 cyl, 16 head, 63 sec, 512 bytes/sect x 117210240 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(wdc1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
 
Oben