ChaosKind
BSD Fan & FreeBSD Nutzer
Hier mal mein Ergebnis nun endlich unter FreeBSD:
Unix Benchmark Utility v.0.3
Copyright (C) July, 1999 PhysTech, Inc.
Author: Sergei Viznyuk <sv@phystech.com>
http://www.phystech.com/download/ubench.html
FreeBSD 6.3-RC1 FreeBSD 6.3-RC1 #0: Tue Nov 27 00:59:35 UTC 2007 root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP i386
Ubench CPU: 72352
Ubench MEM: 51538
--------------------
Ubench AVG: 61945
das ganze auf nem Dual Pentium III mit je 1GHz und 4x256 ECC Registered Kingston Speicher:
Board ASUS CUR-DLS (die Siemens OEM Version)
dmesg:
Unix Benchmark Utility v.0.3
Copyright (C) July, 1999 PhysTech, Inc.
Author: Sergei Viznyuk <sv@phystech.com>
http://www.phystech.com/download/ubench.html
FreeBSD 6.3-RC1 FreeBSD 6.3-RC1 #0: Tue Nov 27 00:59:35 UTC 2007 root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP i386
Ubench CPU: 72352
Ubench MEM: 51538
--------------------
Ubench AVG: 61945
das ganze auf nem Dual Pentium III mit je 1GHz und 4x256 ECC Registered Kingston Speicher:
Board ASUS CUR-DLS (die Siemens OEM Version)
dmesg:
Code:
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.3-RC1 #0: Tue Nov 27 00:59:35 UTC 2007
root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP
ACPI APIC Table: <ASUS CUR-DLS >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (1000.04-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 1073721344 (1023 MB)
avail memory = 1041526784 (993 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 3
cpu1 (AP): APIC ID: 0
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <ASUS CUR-DLS> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xd800-0xd83f mem 0xfe000000-0xfe000fff,0xfd800000-0xfd8fffff at device 2.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:e0:18:32:e6:60
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xd400-0xd47f mem 0xfd000000-0xfd00007f irq 16 at device 3.0 on pci0
miibus1: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus1
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:04:76:e9:9c:65
xl1: <3Com 3c905C-TX Fast Etherlink XL> port 0xd000-0xd07f mem 0xfc800000-0xfc80007f irq 17 at device 4.0 on pci0
miibus2: <MII bus> on xl1
xlphy1: <3c905C 10/100 internal PHY> on miibus2
xlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl1: Ethernet address: 00:04:76:e9:9b:cd
rl0: <RealTek 8139 10/100BaseTX> port 0xb800-0xb8ff mem 0xfc000000-0xfc0000ff at device 5.0 on pci0
miibus3: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus3
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:50:fc:3b:f3:a4
rl1: <RealTek 8139 10/100BaseTX> port 0xb400-0xb4ff mem 0xfb800000-0xfb8000ff at device 6.0 on pci0
miibus4: <MII bus> on rl1
rlphy1: <RealTek internal media interface> on miibus4
rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl1: Ethernet address: 00:50:fc:3b:f3:c4
pci0: <display, VGA> at device 7.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0xe800-0xe80f at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xa800-0xa80f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xf9000000-0xf9000fff irq 9 at device 15.2 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcib1: <ACPI Host-PCI bridge> on acpi0
pci1: <ACPI PCI bus> on pcib1
sym0: <1010-33> port 0xa400-0xa4ff mem 0xf8800000-0xf88003ff,0xf8000000-0xf8001fff irq 24 at device 5.0 on pci1
sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: handling phase mismatch from SCRIPTS.
sym0: SCAN FOR LUNS disabled for targets 2.
sym0: [GIANT-LOCKED]
sym1: <1010-33> port 0xa000-0xa0ff mem 0xf7800000-0xf78003ff,0xf7000000-0xf7001fff irq 25 at device 5.1 on pci1
sym1: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking
sym1: open drain IRQ line driver, using on-chip SRAM
sym1: using LOAD/STORE-based firmware.
sym1: handling phase mismatch from SCRIPTS.
sym1: [GIANT-LOCKED]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc87ff,0xcc000-0xcc7ff on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
Waiting 5 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
(noperiph:sym1:0:-1:-1): SCSI BUS reset delivered.
ad0: 39083MB <Maxtor 34098H4 YAC614Y0> at ata0-master UDMA33
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad0s1a
rl0: link state changed to DOWN
rl0: link state changed to UP
fxp0: device timeout