cabriofahrer
Well-Known Member
Ich habe soeben squid installiert (pkg install squid). Der Service startet m. E. korrekt, squid -z hatte ich auch dürchgeführt, An der squid.conf habe ich nichts geändert.
Normalerweise sollte der Firefox über squid laufen, wenn man in den Einstellungen manuell Proxy mit der IP 127.0.0.1 und Port 3128 eingibt. Ich habe gelesen, dass squid standardmäßig jeglichen Verkehr ins Internet blockt, also erwarte ich eigentlich, dass Firefox nicht mehr ins Internet kommt, es sei denn, ich ändere die squid.conf, richtig?
Firefox geht aber trotzdem ins Internet. Hier die squid.conf:
Normalerweise sollte der Firefox über squid laufen, wenn man in den Einstellungen manuell Proxy mit der IP 127.0.0.1 und Port 3128 eingibt. Ich habe gelesen, dass squid standardmäßig jeglichen Verkehr ins Internet blockt, also erwarte ich eigentlich, dass Firefox nicht mehr ins Internet kommt, es sei denn, ich ändere die squid.conf, richtig?
Firefox geht aber trotzdem ins Internet. Hier die squid.conf:
Code:
$ more /usr/local/etc/squid/squid.conf
#
# Recommended minimum configuration:
#
# Example rule allowing access from your local networks.
# Adapt to list your (internal) IP networks from where browsing
# should be allowed
acl localnet src 0.0.0.1-0.255.255.255 # RFC 1122 "this" network (LAN)
acl localnet src 10.0.0.0/8 # RFC 1918 local private network (LAN)
acl localnet src 100.64.0.0/10 # RFC 6598 shared address space (CGN)
acl localnet src 169.254.0.0/16 # RFC 3927 link-local (directly plugged) machines
acl localnet src 172.16.0.0/12 # RFC 1918 local private network (LAN)
acl localnet src 192.168.0.0/16 # RFC 1918 local private network (LAN)
acl localnet src fc00::/7 # RFC 4193 local private network range
acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines
acl SSL_ports port 443
acl Safe_ports port 80 # http
acl Safe_ports port 21 # ftp
acl Safe_ports port 443 # https
acl Safe_ports port 70 # gopher
acl Safe_ports port 210 # wais
acl Safe_ports port 1025-65535 # unregistered ports
acl Safe_ports port 280 # http-mgmt
acl Safe_ports port 488 # gss-http
acl Safe_ports port 591 # filemaker
acl Safe_ports port 777 # multiling http
acl CONNECT method CONNECT
#
# Recommended minimum Access Permission configuration:
#
# Deny requests to certain unsafe ports
http_access deny !Safe_ports
# Deny CONNECT to other than secure SSL ports
http_access deny CONNECT !SSL_ports
# Only allow cachemgr access from localhost
http_access allow localhost manager
http_access deny manager
# We strongly recommend the following be uncommented to protect innocent
# web applications running on the proxy server who think the only
# one who can access services on "localhost" is a local user
#http_access deny to_localhost
#
# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS
#
# Example rule allowing access from your local networks.
# Adapt localnet in the ACL section to list your (internal) IP networks
# from where browsing should be allowed
http_access allow localnet
http_access allow localhost
# And finally deny all other access to this proxy
http_access deny all
# Squid normally listens to port 3128
http_port 3128
# Uncomment and adjust the following to add a disk cache directory.
#cache_dir ufs /var/squid/cache 100 16 256
# Leave coredumps in the first cache dir
coredump_dir /var/squid/cache
#
# Add any of your own refresh_pattern entries above these.
#
refresh_pattern ^ftp: 1440 20% 10080
refresh_pattern ^gopher: 1440 0% 1440
refresh_pattern -i (/cgi-bin/|\?) 0 0% 0
refresh_pattern . 0 20% 4320
$