sir_eidrien
Nuklearer Mailhamster...
Guten Abend zusammen
Ich habe mir für meine SATA-Platten eine Promise SATAII 300 TX2 plus-PCI-Karte geholt, über wleche ich die Platten anschliessen möchte. Leider kann ich die Platten nicht ansprechen.
Hier meine dmesg:
Hier noch die pciconf:
So wie es aussieht wird der Controller nicht von FreeBSD unterstützt. Weiss jemand ob er unter 6.0-Stable oder gar Current funktioniert? Oder was ich machen kann (ohne mir einen neuen Controller zu holen)?
Besten Dank und Grüsse, s_e
Ich habe mir für meine SATA-Platten eine Promise SATAII 300 TX2 plus-PCI-Karte geholt, über wleche ich die Platten anschliessen möchte. Leider kann ich die Platten nicht ansprechen.
Hier meine dmesg:
Code:
[root@test] ~/> dmesg
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE-p2 #0: Sun Jan 15 14:48:13 CET 2006
root@test.annen.netz:/usr/obj/usr/src/sys/GENERIC
MPTable: <OEM00000 PROD00000000>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) CPU 2.80GHz (2806.38-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf41 Stepping = 1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x651d<SSE3,RSVD2,MON,DS_CPL,TM2,CNTX-ID,CX16,<b14>>
AMD Features=0x20000000<LM>
real memory = 502202368 (478 MB)
avail memory = 482066432 (459 MB)
ioapic0: Assuming intbase of 0
ioapic0 <Version 1.4> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <SiS 661 host to AGP bridge> mem 0xd0000000-0xd7ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <SiS 964 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x4000-0x400f at device 2.5 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <mass storage> at device 10.0 (no driver attached)
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xe000-0xe07f mem 0xe1125000-0xe112507f irq 19 at device 11.0 on pci0
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:0a:5e:43:20:cd
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xccfff,0xcd000-0xcd7ff,0xef000-0xeffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: [FAST]
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0401> can't assign resources (port)
Timecounter "TSC" frequency 2806379530 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 78167MB <Maxtor 6Y080L0 YAR41BW0> at ata0-master UDMA133
GEOM_MIRROR: Device gm0 created (id=2113116160).
GEOM_MIRROR: Device gm0: provider ad0 detected.
acd0: DVDR <TSSTcorpCD/DVDW SH-W162C/TS07> at ata0-slave UDMA33
ad2: 78167MB <Maxtor 6Y080L0 YAR41BW0> at ata1-master UDMA133
GEOM_MIRROR: Device gm0: provider ad2 detected.
GEOM_MIRROR: Device gm0: provider ad2 activated.
GEOM_MIRROR: Device gm0: provider ad0 activated.
GEOM_MIRROR: Device gm0: provider mirror/gm0 launched.
Trying to mount root from ufs:/dev/mirror/gm0s1a
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...3 0 0 done
All buffers synced.
Uptime: 27m41s
GEOM_MIRROR: Device gm0: provider mirror/gm0 destroyed.
GEOM_MIRROR: Device gm0 destroyed.
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE-p2 #0: Sun Jan 15 14:48:13 CET 2006
root@test.annen.netz:/usr/obj/usr/src/sys/GENERIC
ACPI APIC Table: <AWARD AWRDACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) CPU 2.80GHz (2806.37-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf41 Stepping = 1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x651d<SSE3,RSVD2,MON,DS_CPL,TM2,CNTX-ID,CX16,<b14>>
AMD Features=0x20000000<LM>
real memory = 502202368 (478 MB)
avail memory = 482062336 (459 MB)
ioapic0 <Version 1.4> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AWARD AWRDACPI> on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 0 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 0 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 10 on acpi0
pci_link4: <ACPI PCI Link LNKE> irq 11 on acpi0
pci_link5: <ACPI PCI Link LNKF> irq 9 on acpi0
pci_link6: <ACPI PCI Link LNKG> irq 3 on acpi0
pci_link7: <ACPI PCI Link LNKH> irq 5 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff,0x480-0x48f,0x1000-0x10df,0x10e0-0x10ff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <SiS 661 host to AGP bridge> mem 0xd0000000-0xd7ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <SiS 964 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x4000-0x400f at device 2.5 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <mass storage> at device 10.0 (no driver attached)
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xe000-0xe07f mem 0xe1125000-0xe112507f irq 19 at device 11.0 on pci0
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:0a:5e:43:20:cd
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xccfff,0xcd000-0xcd7ff,0xef000-0xeffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2806373209 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 78167MB <Maxtor 6Y080L0 YAR41BW0> at ata0-master UDMA133
GEOM_MIRROR: Device gm0 created (id=2113116160).
GEOM_MIRROR: Device gm0: provider ad0 detected.
acd0: DVDR <TSSTcorpCD/DVDW SH-W162C/TS07> at ata0-slave UDMA33
ad2: 78167MB <Maxtor 6Y080L0 YAR41BW0> at ata1-master UDMA133
GEOM_MIRROR: Device gm0: provider ad2 detected.
GEOM_MIRROR: Device gm0: provider ad2 activated.
Root mount waiting for: GMIRRORGEOM_MIRROR: Device gm0: provider ad0 activated.
GEOM_MIRROR: Device gm0: provider mirror/gm0 launched.
Trying to mount root from ufs:/dev/mirror/gm0s1a
[root@test] ~/>
Hier noch die pciconf:
Code:
[root@test] ~/> pciconf -l -v
pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x00031039 rev=0x00 hdr=0x01
vendor = 'Silicon Integrated Systems (SiS)'
device = 'SiS648FX Virtual PCI to PCI Bridge (AGP)'
class = bridge
subclass = PCI-PCI
isab0@pci0:2:0: class=0x060100 card=0x00000000 chip=0x09641039 rev=0x36 hdr=0x00
vendor = 'Silicon Integrated Systems (SiS)'
device = 'SiS964 LPC Bridge'
class = bridge
subclass = PCI-ISA
atapci0@pci0:2:5: class=0x01018a card=0x1b301019 chip=0x55131039 rev=0x01 hdr=0x00
vendor = 'Silicon Integrated Systems (SiS)'
device = 'SiS5513 EIDE Controller (A,B step)'
class = mass storage
subclass = ATA
[COLOR="Red"]none0@pci0:10:0: class=0x018000 card=0x3d73105a chip=0x3d73105a rev=0x02 hdr=0x00
vendor = 'Promise Technology Inc'
class = mass storage[/COLOR]
xl0@pci0:11:0: class=0x020000 card=0x100010b7 chip=0x920010b7 rev=0x78 hdr=0x00
vendor = '3COM Corp, Networking Division'
device = '3C905C-TX Fast EtherLink for PC Management NIC'
class = network
subclass = ethernet
none1@pci1:0:0: class=0x030000 card=0x1b301019 chip=0x63301039 rev=0x00 hdr=0x00
vendor = 'Silicon Integrated Systems (SiS)'
device = 'SiS661FX/M661FX/760/741/M760/M741 GUI 2D/3D Accelerator'
class = display
subclass = VGA
[root@test] ~/>
So wie es aussieht wird der Controller nicht von FreeBSD unterstützt. Weiss jemand ob er unter 6.0-Stable oder gar Current funktioniert? Oder was ich machen kann (ohne mir einen neuen Controller zu holen)?
Besten Dank und Grüsse, s_e