franco98
NetBSDler aus Leidenschaft
Ich versuche mit cdrecord ein DVD ISO-Image auf eine DVD-RW zu brennen, es kommt zu folgender Ausgabe:
Cdrecord-ProDVD-ProBD-Clone 3.00 (amd64-unknown-openbsd6.2) Copyright (C) 1995-2010 J�rg Schilling
TOC Type: 1 = CD-ROM
scsidev: '/dev/rcd0c:1,1,0'
devname: '/dev/rcd0c'
scsibus: 1 target: 1 lun: 0
Using libscg version 'schily-0.9'.
SCSI buffer size: 61440
atapi: 0
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'hp '
Identifikation : 'CDDVDW SN-208DB '
Revision : 'HH01'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Current: DVD-RW sequential recording
Profile: DVD-R/DL sequential recording
Profile: DVD-R/DL layer jump recording
Profile: DVD+R/DL
Profile: DVD+R
Profile: DVD+RW
Profile: DVD-RW sequential recording (current)
Profile: DVD-RW restricted overwrite
Profile: DVD-RAM
Profile: DVD-R sequential recording
Profile: DVD-ROM
Profile: CD-RW
Profile: CD-R
Profile: CD-ROM
Profile: Removable Disk
Using generic SCSI-3/mmc-2 DVD-R/DVD-RW/DVD-RAM driver (mmc_dvd).
Driver flags : NO-CD DVD MMC-3 SWABAUDIO BURNFREE
Supported modes: PACKET SAO LAYER_JUMP
Drive buf size : 686080 = 670 KB
cdrecord: Warning: Cannot read drive buffer.
cdrecord: Warning: The DMA speed test has been skipped.
FIFO size : 4194304 = 4096 KB
Track 01: data 2267 MB
Total size: 2267 MB = 1161108 sectors
Current Secsize: 2048
Trying to clear drive status.
cdrecord: Drive needs to reload the media to return to proper status.
Nach dem Neuladen des Rohlings:
WARNING: Phys disk size 1161108 differs from rzone size 0! Prerecorded disk?
WARNING: Phys start: 196608 Phys end 1357715
WARNING: Drive returns zero media size. Using media size from ADIP.
Blocks total: 1161108 Blocks current: 1161108 Blocks remaining: 0
Reducing transfer size from 61440 to 32768 bytes.
Starting to write CD/DVD/BD at speed 2 in real SAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
cdrecord: Input/output error. reserve_track_rzone: scsi sendcmd: retryable error
CDB: 53 00 00 00 00 00 11 B7 94 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.000s timeout 200s
cdrecord: Cannot open next track.
Writing time: 0.018s
Average write speed 999.0x.
Fixating...
Fixating time: 0.000s
cdrecord: Input/output error. prevent/allow medium removal: scsi sendcmd: retryable error
CDB: 1E 00 00 00 00 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.000s timeout 200s
cdrecord: fifo had 128 puts and 0 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
Der Befehl war folgender:
doas cdrecord -v -sao speed=2 dev=/dev/rcd0c:1,1,0 DVD-Image.iso
Mit growisofs kommt es danach zu folgender Meldung:
WARNING: /dev/rcd0c already carries isofs!
About to execute 'builtin_dd if=/home/frank/Temp/Temp/GhostBSD-11.1-xfce-amd64-DVD.iso of=/dev/rcd0c obs=32k seek=0'
/dev/rcd0c: "Current Write Speed" is 2.0x1352KBps.
:-[ WRITE@LBA=0h failed with SK=2h/NO ADDITIONAL SENSE INFORMATION]: Input/output error
:-( attempt to re-run with -dvd-compat -dvd-compat to engage DAO or apply full blanking procedure
:-( write failed: Input/output error
Ich hatte zu Beginn die DVD-RW mit doas cdrecord -v -dev=/dev/rcd0c -blank=all komplett formatiert.
Hat jemand eine Idee oder erkennt meinen Fehler?
VG aus LE
Franco
Cdrecord-ProDVD-ProBD-Clone 3.00 (amd64-unknown-openbsd6.2) Copyright (C) 1995-2010 J�rg Schilling
TOC Type: 1 = CD-ROM
scsidev: '/dev/rcd0c:1,1,0'
devname: '/dev/rcd0c'
scsibus: 1 target: 1 lun: 0
Using libscg version 'schily-0.9'.
SCSI buffer size: 61440
atapi: 0
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'hp '
Identifikation : 'CDDVDW SN-208DB '
Revision : 'HH01'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Current: DVD-RW sequential recording
Profile: DVD-R/DL sequential recording
Profile: DVD-R/DL layer jump recording
Profile: DVD+R/DL
Profile: DVD+R
Profile: DVD+RW
Profile: DVD-RW sequential recording (current)
Profile: DVD-RW restricted overwrite
Profile: DVD-RAM
Profile: DVD-R sequential recording
Profile: DVD-ROM
Profile: CD-RW
Profile: CD-R
Profile: CD-ROM
Profile: Removable Disk
Using generic SCSI-3/mmc-2 DVD-R/DVD-RW/DVD-RAM driver (mmc_dvd).
Driver flags : NO-CD DVD MMC-3 SWABAUDIO BURNFREE
Supported modes: PACKET SAO LAYER_JUMP
Drive buf size : 686080 = 670 KB
cdrecord: Warning: Cannot read drive buffer.
cdrecord: Warning: The DMA speed test has been skipped.
FIFO size : 4194304 = 4096 KB
Track 01: data 2267 MB
Total size: 2267 MB = 1161108 sectors
Current Secsize: 2048
Trying to clear drive status.
cdrecord: Drive needs to reload the media to return to proper status.
Nach dem Neuladen des Rohlings:
WARNING: Phys disk size 1161108 differs from rzone size 0! Prerecorded disk?
WARNING: Phys start: 196608 Phys end 1357715
WARNING: Drive returns zero media size. Using media size from ADIP.
Blocks total: 1161108 Blocks current: 1161108 Blocks remaining: 0
Reducing transfer size from 61440 to 32768 bytes.
Starting to write CD/DVD/BD at speed 2 in real SAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
cdrecord: Input/output error. reserve_track_rzone: scsi sendcmd: retryable error
CDB: 53 00 00 00 00 00 11 B7 94 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.000s timeout 200s
cdrecord: Cannot open next track.
Writing time: 0.018s
Average write speed 999.0x.
Fixating...
Fixating time: 0.000s
cdrecord: Input/output error. prevent/allow medium removal: scsi sendcmd: retryable error
CDB: 1E 00 00 00 00 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.000s timeout 200s
cdrecord: fifo had 128 puts and 0 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
Der Befehl war folgender:
doas cdrecord -v -sao speed=2 dev=/dev/rcd0c:1,1,0 DVD-Image.iso
Mit growisofs kommt es danach zu folgender Meldung:
WARNING: /dev/rcd0c already carries isofs!
About to execute 'builtin_dd if=/home/frank/Temp/Temp/GhostBSD-11.1-xfce-amd64-DVD.iso of=/dev/rcd0c obs=32k seek=0'
/dev/rcd0c: "Current Write Speed" is 2.0x1352KBps.
:-[ WRITE@LBA=0h failed with SK=2h/NO ADDITIONAL SENSE INFORMATION]: Input/output error
:-( attempt to re-run with -dvd-compat -dvd-compat to engage DAO or apply full blanking procedure
:-( write failed: Input/output error
Ich hatte zu Beginn die DVD-RW mit doas cdrecord -v -dev=/dev/rcd0c -blank=all komplett formatiert.
Hat jemand eine Idee oder erkennt meinen Fehler?
VG aus LE
Franco