Kernel kompilieren -

C

com.b.o

Member
Hi

Ich habe ein Problem bei der Kernel Kompilation.
Und zwar bekomm ich folgende Fehlermeldungen:

rm -f .newdep
make -V CFILES -V SYSTEM_CFILES -V GEN_CFILES | xargs mkdep -a -f .newdep -O -pipe -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extensions -ansi -nostdinc -I- -I. -I../.. -I../../../include -I../../contrib/dev/acpica -I../../contrib/ipfilter -D_KERNEL -include opt_global.h -mpreferred-stack-boundary=2
In file included from ../../dev/amr/amr_pci.c:75:
../../pci/pcivar.h:176: pci_if.h: No such file or directory
In file included from ../../dev/amr/amr.c:81:
../../pci/pcivar.h:176: pci_if.h: No such file or directory
In file included from ../../dev/bge/if_bge.c:112:
../../pci/pcivar.h:176: pci_if.h: No such file or directory
In file included from ../../dev/ciss/ciss.c:96:
../../pci/pcivar.h:176: pci_if.h: No such file or directory
In file included from ../../dev/fxp/if_fxp.c:70:
../../pci/pcivar.h:176: pci_if.h: No such file or directory
In file included from ../../dev/mlx/mlx_pci.c:45:
../../pci/pcivar.h:176: pci_if.h: No such file or directory
In file included from ../../dev/mly/mly_pci.c:46:
../../pci/pcivar.h:176: pci_if.h: No such file or directory
In file included from ../../dev/twe/twe_compat.h:56,
from ../../dev/twe/twe.c:34:
../../pci/pcivar.h:176: pci_if.h: No such file or directory
In file included from ../../dev/twe/twe_compat.h:56,
from ../../dev/twe/twe_freebsd.c:41:
../../pci/pcivar.h:176: pci_if.h: No such file or directory
In file included from ../../dev/tx/if_tx.c:71:
../../pci/pcivar.h:176: pci_if.h: No such file or directory
In file included from ../../dev/txp/if_txp.c:81:
../../pci/pcivar.h:176: pci_if.h: No such file or directory
In file included from ../../pci/agp.c:43:
../../pci/pcivar.h:176: pci_if.h: No such file or directory
In file included from ../../pci/agp_intel.c:39:
../../pci/pcivar.h:176: pci_if.h: No such file or directory
In file included from ../../pci/agp_via.c:39:
../../pci/pcivar.h:176: pci_if.h: No such file or directory
In file included from ../../pci/agp_sis.c:39:
../../pci/pcivar.h:176: pci_if.h: No such file or directory
In file included from ../../pci/agp_ali.c:39:
../../pci/pcivar.h:176: pci_if.h: No such file or directory
In file included from ../../pci/agp_amd.c:39:
../../pci/pcivar.h:176: pci_if.h: No such file or directory
In file included from ../../pci/agp_i810.c:44:
../../pci/pcivar.h:176: pci_if.h: No such file or directory
In file included from ../../pci/if_dc.c:123:
../../pci/pcivar.h:176: pci_if.h: No such file or directory
In file included from ../../pci/if_de.c:88:
../../pci/pcivar.h:176: pci_if.h: No such file or directory
In file included from ../../pci/if_pcn.c:88:
../../pci/pcivar.h:176: pci_if.h: No such file or directory
In file included from ../../pci/if_rl.c:116:
../../pci/pcivar.h:176: pci_if.h: No such file or directory
In file included from ../../pci/if_sf.c:115:
../../pci/pcivar.h:176: pci_if.h: No such file or directory
In file included from ../../pci/if_sis.c:93:
../../pci/pcivar.h:176: pci_if.h: No such file or directory
In file included from ../../pci/if_ste.c:66:
../../pci/pcivar.h:176: pci_if.h: No such file or directory
In file included from ../../pci/if_tl.c:211:
../../pci/pcivar.h:176: pci_if.h: No such file or directory
In file included from ../../pci/if_vr.c:92:
../../pci/pcivar.h:176: pci_if.h: No such file or directory
In file included from ../../pci/if_wb.c:116:
../../pci/pcivar.h:176: pci_if.h: No such file or directory
In file included from ../../pci/if_xl.c:134:
../../pci/pcivar.h:176: pci_if.h: No such file or directory
In file included from ../../pci/uhci_pci.c:66:
../../pci/pcivar.h:176: pci_if.h: No such file or directory
In file included from ../../pci/ohci_pci.c:64:
../../pci/pcivar.h:176: pci_if.h: No such file or directory
In file included from ../../dev/em/if_em.h:72,
from ../../dev/em/if_em.c:36:
../../pci/pcivar.h:176: pci_if.h: No such file or directory
In file included from ../../dev/em/if_em_osdep.h:54,
from ../../dev/em/if_em_hw.h:42,
from ../../dev/em/if_em_hw.c:39:
../../pci/pcivar.h:176: pci_if.h: No such file or directory
cc: Internal compiler error: program cpp0 got fatal signal 11
mkdep: compile failed
*** Error code 1

Stop in /usr/src/sys/compile/ALH.


Ich habe davor folgende Schritte ausgeführt:

1.)cd /usr/src/sys/i386/conf
2.)cp GENERIC ALH
3.)ee ALH
4.)/usr/sbin/config ALH
5.)cd ../../compile/ALH
6.)make depend && make && make install

Was mache ich falsch?
Die Kernelquellen sind installiert.
 
Der Schritt 3 ist vermutlich falsch. D.h., du musst das was du zuviel auskommentiert hast, wieder entkommentieren.
 
Kernelconfig schaut so aus:

2003/04/28 03:41:46 simokawa Exp $

machine i386
#cpu I386_CPU
#cpu I486_CPU
#cpu I586_CPU
cpu I686_CPU
ident ALH-KERNEL
maxusers 0

#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols

#options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options INET6 #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options SOFTUPDATES #Enable FFS soft updates support
options UFS_DIRHASH #Improve performance on big directories
options MFS #Memory Filesystem
options MD_ROOT #MD is a potential root device
options NFS #Network Filesystem
options NFS_ROOT #NFS usable as root device, NFS required
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options CD9660_ROOT #CD-ROM usable as root, CD9660 required
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI
options UCONSOLE #Allow users to grab the console
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time extensions
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM #Rate limit bad replies
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.

# To make an SMP kernel, the next two are needed
#options SMP # Symmetric MultiProcessor Kernel
#options APIC_IO # Symmetric (APIC) I/O

# To support HyperThreading, HTT is needed in addition to SMP and APIC_IO
#options HTT # HyperThreading Technology

device isa
#device eisa
#device pci

# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
#device fd1 at fdc0 drive 1
#
# If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
# don't use the above line for fdc0 but the following one:
#device fdc0

# ATA and ATAPI devices
#device ata0 at isa? port IO_WD1 irq 14
#device ata1 at isa? port IO_WD2 irq 15
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
options ATA_STATIC_ID #Static device numbering

# SCSI Controllers
#device ahb # EISA AHA1742 family
#device ahc # AHA2940 and onboard AIC7xxx devices
#device ahd # AHA39320/29320 and onboard AIC79xx devices
#device amd # AMD 53C974 (Tekram DC-390(T))
#device isp # Qlogic family
#device mpt # LSI-Logic MPT/Fusion
#device ncr # NCR/Symbios Logic
#device sym # NCR/Symbios Logic (newer chipsets)
options SYM_SETUP_LP_PROBE_MAP=0x40
# Allow ncr to attach legacy NCR devices when
# both sym and ncr are configured

#device adv0 at isa?
#device adw
#device bt0 at isa?
#device aha0 at isa?
#device aic0 at isa?

#device ncv # NCR 53C500
#device nsp # Workbit Ninja SCSI-3
#device stg # TMC 18C30/18C50

# SCSI peripherals
#device scbus # SCSI bus (required)
#device da # Direct Access (disks)
#device sa # Sequential Access (tape etc)
#device cd # CD
#device pass # Passthrough device (direct SCSI access)

# RAID controllers interfaced to the SCSI subsystem
device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
device dpt # DPT Smartcache - See LINT for options!
device iir # Intel Integrated RAID
device mly # Mylex AcceleRAID/eXtremeRAID
device ciss # Compaq SmartRAID 5* series

# RAID controllers
device aac # Adaptec FSA RAID, Dell PERC2/PERC3
#device aacp # SCSI passthrough for aac (requires CAM)
device ida # Compaq Smart RAID
device amr # AMI MegaRAID
device mlx # Mylex DAC960 family
device twe # 3ware Escalade

# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1 flags 0x1
device psm0 at atkbdc? irq 12

device vga0 at isa?

# splash screen/screen saver
pseudo-device splash

# syscons is the default console driver, resembling an SCO console
device sc0 at isa? flags 0x100

# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device vt0 at isa?
#options XSERVER # support for X server on a vt console
#options FAT_CURSOR # start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options PCVT_SCANSET=2 # IBM keyboards are non-std

device agp # support several AGP chipsets

# Floating point support - do not disable.
device npx0 at nexus? port IO_NPX irq 13

# Power management support (see LINT for more options)
device apm0 at nexus? disable flags 0x20 # Advanced Power Management

# PCCARD (PCMCIA) support
#device card
#device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000
#device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable

# Serial (COM) ports
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio1 at isa? port IO_COM2 irq 3
device sio2 at isa? disable port IO_COM3 irq 5
device sio3 at isa? disable port IO_COM4 irq 9

# Parallel port
device ppc0 at isa? irq 7
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da


# PCI Ethernet NICs.
device de # DEC/Intel DC21x4x (``Tulip'')
device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
device txp # 3Com 3cR990 (``Typhoon'')
device vx # 3Com 3c590, 3c595 (``Vortex'')

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
device dc # DEC/Intel 21143 and various workalikes
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
device pcn # AMD Am79C97x PCI 10/100 NICs
device rl # RealTek 8129/8139
device sf # Adaptec AIC-6915 (``Starfire'')
device sis # Silicon Integrated Systems SiS 900/SiS 7016
device ste # Sundance ST201 (D-Link DFE-550TX)
device tl # Texas Instruments ThunderLAN
device tx # SMC EtherPower II (83c170 ``EPIC'')
device vr # VIA Rhine, Rhine II
device wb # Winbond W89C840F
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
device bge # Broadcom BCM570x (``Tigon III'')

# ISA Ethernet NICs.
# 'device ed' requires 'device miibus'
device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000
device ex
device ep
device fe0 at isa? disable port 0x300
# Xircom Ethernet
device xe
# PRISM I IEEE 802.11b wireless NIC.
device awi
# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
# exists only as a PCMCIA device, so there is no ISA attachment needed
# and resources will always be dynamically assigned by the pccard code.
device wi
# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
# mode (the factory default). If you set the switches on your ISA
# card for a manually chosen I/O address and IRQ, you must specify
# those parameters here.
device an
# The probe order of these is presently determined by i386/isa/isa_compat.c.
device ie0 at isa? disable port 0x300 irq 10 iomem 0xd0000
#device le0 at isa? disable port 0x300 irq 5 iomem 0xd0000
device lnc0 at isa? disable port 0x280 irq 10 drq 0
device cs0 at isa? disable port 0x300
device sn0 at isa? disable port 0x300 irq 10

# Pseudo devices - the number indicates how many units to allocate.
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
pseudo-device sl 1 # Kernel SLIP
pseudo-device ppp 1 # Kernel PPP
pseudo-device tun # Packet tunnel.
pseudo-device pty # Pseudo-ttys (telnet etc)
pseudo-device md # Memory "disks"
pseudo-device gif # IPv6 and IPv4 tunneling
pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)

# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device bpf #Berkeley packet filter

# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
device uscanner # Scanners
device urio # Diamond Rio MP3 Player
# USB Ethernet, requires mii
device aue # ADMtek USB ethernet
device cue # CATC USB ethernet
device kue # Kawasaki LSI USB ethernet

# FireWire support
device firewire # FireWire bus code
device sbp # SCSI over FireWire (Requires scbus and da)
device fwe # Ethernet over FireWire (non-standard!)
 
OK hab ich gemacht.
Jetzt kommt aber folgende Fehlermeldung:

In file included from ../../sys/param.h:64,
from ../../miscfs/procfs/procfs_fpregs.c:43:
../../sys/types.h:154: syntax error before `timer_t'
../../sys/types.h:154: warning: type defaults to `int' in declaration of `timer_t'
../../sys/types.h:154: warning: data definition has no type or storage class
../../sys/types.h:171: syntax error before `fd_mask'
cpp0: output pipe has been closed
*** Error code 1

Stop in /usr/src/sys/compile/ALH
 
com.b.o schrieb:
Kernelconfig schaut so aus:
...
# Power management support (see LINT for more options)
device apm0 at nexus? disable flags 0x20 # Advanced Power Management
...
Zum Vergrößern anklicken....
Solltest das evtl noch auskommentieren, da wenn deine Maschine ACPI kann, das der falche Treiber ist.
 
Also GENERIC kompiliert auch nicht durch.
Es kommt folgende Fehlermeldung:

cc: cpp0: Internal compiler error: program cc1 got fatal signal 11output pipe ha s been closed

*** Error code 1

Stop in /usr/src/sys/compile/ALH.
 
mhm das is immer blöd. welche version hast du am laufen (unama -a)
mach doch mal ein update der sourcen und probier es erneut. (cvsup)
 
com.b.o schrieb:
Also GENERIC kompiliert auch nicht durch.
Es kommt folgende Fehlermeldung:

cc: cpp0: Internal compiler error: program cc1 got fatal signal 11output pipe ha s been closed

*** Error code 1

Stop in /usr/src/sys/compile/ALH.
Zum Vergrößern anklicken....

Bist Du sicher das Du auch GENERIC kompiliert hast??? Wieso sagt er am Ende
Stop in /usr/src/sys/compile/ALH
Zum Vergrößern anklicken....
 
Weil ich einfach eine Kopie von GENERIC gemacht habe.

Wenn ich GENERIC nehme kommt diese Fehlermeldung:
cc: Internal compiler error: program cc1 got fatal signal 11
*** Error code 1
 
Zuletzt bearbeitet:
Du musst dich einloggen oder registrieren, um hier zu antworten.
Zurück
Oben