Also ich habe ein Samsung XVM III. Ich habe iwi-firmware-kmod installiert und eine wpa_supplicant.conf erzeugt.
Nach dem Aufruf
bekomme ich an der Console folgende Ausgabe:
Die Verbindung bricht sporadisch allerdings ab, das soll jetzt aber nicht das Problem sein.
ifconfig gibt folgendes aus:
danach ein dhclient iwi und ich bekomme per DHCP eine IP zugewiesen.
Wenn ich nun aber ein ping auf z.B. www.heise.de mache dann kommt folgende Ausgabe:
Auch der Router selbst lässt sich nicht anpingen.
Hat jemand von euch eine Idee? Das ganze ist übrigens ein FreeBSD 6.3 (desktopBSD).
Nach dem Aufruf
Code:
wpa_supplicant -i iwi0 -c /etc/wpa_supplicant.conf
bekomme ich an der Console folgende Ausgabe:
Code:
Trying to associate with 00:1d:7e:9b:1a:20 (SSID='linksys-g2007' freq=2462 MHz)
Associated with 00:1d:7e:9b:1a:20
WPA: Key negotiation completed with 00:1d:7e:9b:1a:20 [PTK=TKIP GTK=TKIP]
CTRL-EVENT-CONNECTED - Connection to 00:1d:7e:9b:1a:20 completed (reauth)
WPA: Group rekeying completed with 00:1d:7e:9b:1a:20 [GTK=TKIP]
ifconfig gibt folgendes aus:
Code:
iwi0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 00:13:ce:9e:a4:41
media: IEEE 802.11 Wireless Ethernet autoselect
status: associated
ssid linksys-g2007 channel 11 bssid 00:1d:7e:9b:1a:20
authmode WPA privacy ON deftxkey UNDEF TKIP 3:128-bit txpowmax 100
bmiss 10 protmode CTS roaming MANUAL bintval 100
Wenn ich nun aber ein ping auf z.B. www.heise.de mache dann kommt folgende Ausgabe:
Code:
ping: cannot resolve www.heise.de: Host name lookup failure
Hat jemand von euch eine Idee? Das ganze ist übrigens ein FreeBSD 6.3 (desktopBSD).