Ich bekomme ppp nicht zum Laufen.

[Ventura_183]

Ich bekomme ppp nicht zum Laufen.


Unter FreeBSD 6.1 nutze ich eine ISDN Fritz!Card PCI v2.0.

Nach dem Befehl „dial papchap“ erhalte ich folgende Fehlermeldung:

Chat script failed

Meine /etc/ppp/ppp.conf sieht so aus:

#################################################################
# PPP Sample Configuration File
# Originally written by Toshiharu OHNO
# Simplified 5/14/1999 by wself@cdrom.com
#
# See /usr/share/examples/ppp/ for some examples
#
# $FreeBSD: src/etc/ppp/ppp.conf,v 1.10 2004/11/19 17:12:56 obrien Exp $
#################################################################

default:
set log Phase Chat LCP IPCP CCP tun command
ident user-ppp VERSION (built COMPILATIONDATE)

# Ensure that "device" references the correct serial port
# for your modem. (cuad0 = COM1, cuad1 = COM2)
#
set device /dev/cuad0

set speed 115200
set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
\"\" AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT"
set timeout 180 # 3 minute idle timer (the default)
enable dns # request DNS info (for resolv.conf)

papchap:
#
# edit the next three lines and replace the items in caps with
# the values which have been assigned by your ISP.
#

set phone "0192071"
set authname abcd123...0
set authkey 123...0

set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
add default HISADDR # Add a (sticky) default route


Meine /var/log/ppp.log sieht so aus:

Nov 24 14:32:01 ppp[529]: Phase: Using interface: tun0
Nov 24 14:32:01 ppp[529]: Phase: deflink: Created in closed state
Nov 24 14:32:01 ppp[529]: tun0: Command: default: ident user-ppp VERSION (built COMPILATIONDATE)
Nov 24 14:32:01 ppp[529]: tun0: Command: default: set device /dev/cuad0
Nov 24 14:32:01 ppp[529]: tun0: Command: default: set speed 115200
Nov 24 14:32:01 ppp[529]: tun0: Command: default: set dial ABORT BUSY ABORT NO\sCARRIER TIMEOUT 5 "" AT OK-AT-OK ATE1Q0 OK \dATDT\T TIMEOUT 40 CONNECT
Nov 24 14:32:01 ppp[529]: tun0: Command: default: set timeout 180
Nov 24 14:32:01 ppp[529]: tun0: Command: default: enable dns
Nov 24 14:32:01 ppp[529]: tun0: Phase: PPP Started (interactive mode).
Nov 24 14:32:14 ppp[529]: tun0: Command: /dev/ttyv0: dial papchap
Nov 24 14:32:14 ppp[529]: tun0: Command: papchap: set phone 0192071
Nov 24 14:32:14 ppp[529]: tun0: Command: papchap: set authname abcd...0
Nov 24 14:32:14 ppp[529]: tun0: Command: papchap: set authkey ********
Nov 24 14:32:14 ppp[529]: tun0: Command: papchap: set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
Nov 24 14:32:14 ppp[529]: tun0: Command: papchap: add default HISADDR
Nov 24 14:32:14 ppp[529]: tun0: Phase: bundle: Establish
Nov 24 14:32:14 ppp[529]: tun0: Phase: deflink: closed -> opening
Nov 24 14:32:14 ppp[529]: tun0: Phase: deflink: Connected!
Nov 24 14:32:14 ppp[529]: tun0: Phase: deflink: opening -> dial
Nov 24 14:32:14 ppp[529]: tun0: Chat: Phone: 0192071
Nov 24 14:32:14 ppp[529]: tun0: Chat: deflink: Dial attempt 1 of 1
Nov 24 14:32:14 ppp[529]: tun0: Chat: Send: AT^M
Nov 24 14:32:14 ppp[529]: tun0: Chat: Expect(5): OK
Nov 24 14:32:19 ppp[529]: tun0: Chat: Expect timeout
Nov 24 14:32:19 ppp[529]: tun0: Chat: Send: AT^M
Nov 24 14:32:19 ppp[529]: tun0: Chat: Expect(5): OK
Nov 24 14:32:24 ppp[529]: tun0: Chat: Expect timeout
Nov 24 14:32:24 ppp[529]: tun0: Warning: Chat script failed
Nov 24 14:32:24 ppp[529]: tun0: Phase: deflink: dial -> hangup
Nov 24 14:32:24 ppp[529]: tun0: Phase: deflink: Disconnected!
Nov 24 14:32:24 ppp[529]: tun0: Phase: deflink: Connect time: 10 secs: 0 octets in, 0 octets out
Nov 24 14:32:24 ppp[529]: tun0: Phase: deflink: 0 packets in, 0 packets out
Nov 24 14:32:24 ppp[529]: tun0: Phase: total 0 bytes/sec, peak 0 bytes/sec on Fri Nov 24 14:32:14 2006
Nov 24 14:32:24 ppp[529]: tun0: Phase: deflink: hangup -> closed
Nov 24 14:32:24 ppp[529]: tun0: Phase: bundle: Dead
Nov 24 14:32:32 ppp[529]: tun0: Command: /dev/ttyv0: quit
Nov 24 14:32:32 ppp[529]: tun0: Phase: PPP Terminated (normal).


Was mache ich falsch?