Multiprozessorboards für xBSD

Yamagi · 1 Mai 2006

Sicher kennt ihr den alten Multiprozessorboard-Thread, erstellt von Gregor mit der Bitte, Daten für seine Datenbank der von FreeBSD unterstützten Multiprozessorboards zu sammeln. Nun ist dieser Thread inzwischen aber ein paar Jahre alt, die Beteiligung entsprechend gering und in der Datenbank finden sich nur noch selten neue Boards. Zudem gibt es inzwischen von FreeBSD-Projekte eine offizielle Liste, welche aber lange nicht vollständig ist.
Da in letzter Zeit Rufe laut wurden, wieder einmal eine aktuelle Liste zu erstellen, nun dieser Thread. Postet hier bitte eure Multiprozessorboards, egals ob neu oder alt, nach den unten genannten Regeln. Ich werde diese Daten natürlich auch Gregor zur Verfügung stellen, habe aber zum derzeitigen Zeitpunkt noch keinen Kontakt mit ihm aufgenommen.

Regeln
- In die erste Zeile bitte Betriebssystem mit Version und Architektur und den genauen Boardnamen.
- Danach Biosversion, sowie Link zum dem Hersteller, möglichst auch Link zum Produkt.
- Drittens eine Liste der verwendeten Hardware
- Viertens bitte eine dmesg, erstellt mit boot -v, sowei pciconf -lv und mptable
- Zuletzt ist Raum für Anmerkungen, wie zum Beispiel eine kurze Kritik oder zum Auflisten bekannter Macken

Links
alter Thread: http://www.bsdforen.de/showthread.php?t=6324
Die Datenbank: http://www.bnv-bamberg.de/home/ba3294/smp/index.htm

Yamagi · 1 Mai 2006

FreeBSD 6.1 RC1 amd64 - Tyan K8WE (s2895)

Hersteller: Tyan - www.tyan.com
Produktlink: http://www.tyan.com/products/html/thunderk8we.html
BIOS: 1.02

2x AMD Opteron 265 @ 1800MHz
4GB RAM, bestehend aus 4 Corsair 1GB-Riegelb, Reg. ECC
nVidia Geforce 6200TC
Seagate 7200.9 250GB S-ATA

dmesg:

Code:

Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RC #0: Wed Apr 26 18:05:55 CEST 2006
    root@hellknight.horst.lan:/usr/obj/usr/src/sys/HELLKNIGHT
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff806a8000.
INTR: Adding local APIC 0 as a target
ACPI APIC Table: <PTLTD  	 APIC  >
Calibrating clock(s) ... i8254 clock: 1193150 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1808343170 Hz
CPU: Dual Core AMD Opteron(tm) Processor 265 (1808.34-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x20f12  Stepping = 2
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x1<SSE3>
  AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow+,3DNow>
  AMD Features2=0x3<LAHF,CMP>
    HTT bit cleared - FreeBSD does not have licensing issues requiring it.

  Cores per package: 2
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 32 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
real memory  = 5637144576 (5376 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x0000000000097fff, 618496 bytes (151 pages)
0x00000000007a7000 - 0x00000000761cffff, 1973587968 bytes (481833 pages)
0x0000000080000000 - 0x00000000aff7ffff, 804782080 bytes (196480 pages)
0x0000000100000000 - 0x000000014ffeffff, 1342111744 bytes (327664 pages)
avail memory = 4110151680 (3919 MB)
INTR: Adding local APIC 1 as a target
INTR: Adding local APIC 2 as a target
INTR: Adding local APIC 3 as a target
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
APIC: CPU 2 has ACPI ID 2
APIC: CPU 3 has ACPI ID 3
MADT: Found IO APIC ID 4, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Found IO APIC ID 5, Interrupt 24 at 0xd0000000
ioapic1: intpin 0 -> PCI IRQ 24 (level, low)
ioapic1: intpin 1 -> PCI IRQ 25 (level, low)
ioapic1: intpin 2 -> PCI IRQ 26 (level, low)
ioapic1: intpin 3 -> PCI IRQ 27 (level, low)
MADT: Found IO APIC ID 6, Interrupt 28 at 0xd0001000
ioapic2: intpin 0 -> PCI IRQ 28 (level, low)
ioapic2: intpin 1 -> PCI IRQ 29 (level, low)
ioapic2: intpin 2 -> PCI IRQ 30 (level, low)
ioapic2: intpin 3 -> PCI IRQ 31 (level, low)
MADT: Found IO APIC ID 7, Interrupt 32 at 0xd0400000
ioapic3: intpin 0 -> PCI IRQ 32 (level, low)
ioapic3: intpin 1 -> PCI IRQ 33 (level, low)
ioapic3: intpin 2 -> PCI IRQ 34 (level, low)
ioapic3: intpin 3 -> PCI IRQ 35 (level, low)
ioapic3: intpin 4 -> PCI IRQ 36 (level, low)
ioapic3: intpin 5 -> PCI IRQ 37 (level, low)
ioapic3: intpin 6 -> PCI IRQ 38 (level, low)
ioapic3: intpin 7 -> PCI IRQ 39 (level, low)
ioapic3: intpin 8 -> PCI IRQ 40 (level, low)
ioapic3: intpin 9 -> PCI IRQ 41 (level, low)
ioapic3: intpin 10 -> PCI IRQ 42 (level, low)
ioapic3: intpin 11 -> PCI IRQ 43 (level, low)
ioapic3: intpin 12 -> PCI IRQ 44 (level, low)
ioapic3: intpin 13 -> PCI IRQ 45 (level, low)
ioapic3: intpin 14 -> PCI IRQ 46 (level, low)
ioapic3: intpin 15 -> PCI IRQ 47 (level, low)
ioapic3: intpin 16 -> PCI IRQ 48 (level, low)
ioapic3: intpin 17 -> PCI IRQ 49 (level, low)
ioapic3: intpin 18 -> PCI IRQ 50 (level, low)
ioapic3: intpin 19 -> PCI IRQ 51 (level, low)
ioapic3: intpin 20 -> PCI IRQ 52 (level, low)
ioapic3: intpin 21 -> PCI IRQ 53 (level, low)
ioapic3: intpin 22 -> PCI IRQ 54 (level, low)
ioapic3: intpin 23 -> PCI IRQ 55 (level, low)
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
lapic2: Routing NMI -> LINT1
lapic2: LINT1 trigger: edge
lapic2: LINT1 polarity: high
lapic3: Routing NMI -> LINT1
lapic3: LINT1 trigger: edge
lapic3: LINT1 polarity: high
ioapic0 <Version 1.1> irqs 0-23 on motherboard
ioapic1 <Version 1.1> irqs 24-27 on motherboard
ioapic2 <Version 1.1> irqs 28-31 on motherboard
ioapic3 <Version 1.1> irqs 32-55 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x00040010 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000
mem: <memory>
null: <null device, zero device>
nfslock: pseudo-device
random: <entropy source, Software, Yarrow>
io: <I/O>
acpi0: <PTLTD   RSDT> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
pci_open(1):	mode 1 addr port (0x0cf8) is 0x8000ca94
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=058000] [hdr=00] is there (id=005e10de)
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 1 func 0
acpi0: Power Button (fixed)
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 1 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 24 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 24 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 1 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 1 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 1 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 1 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 1 func 1
pci_link0: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  16 17 18 19
pci_link0: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  16 17 18 19
pci_link0: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  16 17 18 19
pci_link1: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  16 17 18 19
pci_link1: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  16 17 18 19
pci_link1: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  16 17 18 19
pci_link2: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  16 17 18 19
pci_link2: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  16 17 18 19
pci_link2: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  16 17 18 19
pci_link3: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  16 17 18 19
pci_link3: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  16 17 18 19
pci_link3: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  16 17 18 19
pci_link4: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  16 17 18 19
pci_link4: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  16 17 18 19
pci_link4: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  16 17 18 19
pci_link5: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link5: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link5: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link6: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link6: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link6: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link7: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link7: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link7: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link8: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link8: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link8: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link9: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link9: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link9: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link10: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link10: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link10: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link11: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link11: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link11: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link12: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link12: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link12: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link13: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link13: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link13: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link14: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link14: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link14: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
AcpiOsDerivePciId: bus 128 dev 1 func 0
pci_link15: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  48 49 50 51
pci_link15: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  48 49 50 51
pci_link15: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  48 49 50 51
pci_link16: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  48 49 50 51
pci_link16: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  48 49 50 51
pci_link16: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  48 49 50 51
pci_link17: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  48 49 50 51
pci_link17: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  48 49 50 51
pci_link17: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  48 49 50 51
pci_link18: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  48 49 50 51
pci_link18: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  48 49 50 51
pci_link18: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  48 49 50 51
pci_link19: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  48 49 50 51
pci_link19: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  48 49 50 51
pci_link19: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  48 49 50 51
pci_link20: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  52 53 54 55
pci_link20: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  52 53 54 55
pci_link20: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  52 53 54 55
pci_link21: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  52 53 54 55
pci_link21: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  52 53 54 55
pci_link21: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  52 53 54 55
pci_link22: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  52 53 54 55
pci_link22: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  52 53 54 55
pci_link22: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  52 53 54 55
pci_link23: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  52 53 54 55
pci_link23: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  52 53 54 55
pci_link23: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  52 53 54 55
pci_link24: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  52 53 54 55
pci_link24: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  52 53 54 55
pci_link24: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  52 53 54 55
pci_link25: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  52 53 54 55
pci_link25: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  52 53 54 55
pci_link25: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  52 53 54 55
pci_link26: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  52 53 54 55
pci_link26: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  52 53 54 55
pci_link26: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  52 53 54 55
pci_link27: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  52 53 54 55
pci_link27: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  52 53 54 55
pci_link27: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  52 53 54 55
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU> on acpi0
powernow0: <Cool`n'Quiet K8> on cpu0
cpu1: <ACPI CPU> on acpi0
powernow1: <Cool`n'Quiet K8> on cpu1
cpu2: <ACPI CPU> on acpi0
powernow2: <Cool`n'Quiet K8> on cpu2
cpu3: <ACPI CPU> on acpi0
powernow3: <Cool`n'Quiet K8> on cpu3
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found->	vendor=0x10de, dev=0x005e, revid=0xa3
	bus=0, slot=0, func=0
	class=05-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x0051, revid=0xa3
	bus=0, slot=1, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type 4, range 32, base 00008c00, size 10, enabled
found->	vendor=0x10de, dev=0x0052, revid=0xa2
	bus=0, slot=1, func=1
	class=0c-05-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D3  current D0
	map[10]: type 4, range 32, base 00000000, size  5, enabled
	map[20]: type 4, range 32, base 0000a000, size  6, enabled
	map[24]: type 4, range 32, base 0000a040, size  6, enabled
found->	vendor=0x10de, dev=0x005a, revid=0xa2
	bus=0, slot=2, func=0
	class=0c-03-10, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base b0000000, size 12, enabled
pcib0: matched entry for 0.2.INTA (src \\_SB_.PCI0.LUS0:0)
pci_link6: Picked IRQ 20 with weight 0
ioapic0: Changing polarity for pin 20 to high
pcib0: slot 2 INTA routed to irq 20 via \\_SB_.PCI0.LUS0
found->	vendor=0x10de, dev=0x005b, revid=0xa3
	bus=0, slot=2, func=1
	class=0c-03-20, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	intpin=b, irq=7
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base b0001000, size  8, enabled
pcib0: matched entry for 0.2.INTB (src \\_SB_.PCI0.LUS2:0)
pci_link7: Picked IRQ 21 with weight 0
ioapic0: Changing polarity for pin 21 to high
pcib0: slot 2 INTB routed to irq 21 via \\_SB_.PCI0.LUS2
found->	vendor=0x10de, dev=0x0059, revid=0xa2
	bus=0, slot=4, func=0
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x05 (1250 ns)
	intpin=a, irq=12
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 00001800, size  8, enabled
	map[14]: type 4, range 32, base 00001400, size  8, enabled
	map[18]: type 1, range 32, base b0002000, size 12, enabled
pcib0: matched entry for 0.4.INTA (src \\_SB_.PCI0.LACI:0)
pci_link9: Picked IRQ 22 with weight 0
ioapic0: Changing polarity for pin 22 to high
pcib0: slot 4 INTA routed to irq 22 via \\_SB_.PCI0.LACI
found->	vendor=0x10de, dev=0x0053, revid=0xf2
	bus=0, slot=6, func=0
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	powerspec 2  supports D0 D3  current D0
	map[20]: type 4, range 32, base 00001c00, size  4, enabled
found->	vendor=0x10de, dev=0x0055, revid=0xf3
	bus=0, slot=8, func=0
	class=01-01-85, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	map[10]: type 4, range 32, base 00001c30, size  3, enabled
	map[14]: type 4, range 32, base 00001c24, size  2, enabled
	map[18]: type 4, range 32, base 00001c28, size  3, enabled
	map[1c]: type 4, range 32, base 00001c20, size  2, enabled
	map[20]: type 4, range 32, base 00001c10, size  4, enabled
	map[24]: type 1, range 32, base b0003000, size 12, enabled
pcib0: matched entry for 0.8.INTA (src \\_SB_.PCI0.LSI1:0)
pci_link13: Picked IRQ 23 with weight 0
ioapic0: Changing polarity for pin 23 to high
pcib0: slot 8 INTA routed to irq 23 via \\_SB_.PCI0.LSI1
found->	vendor=0x10de, dev=0x005c, revid=0xa2
	bus=0, slot=9, func=0
	class=06-04-01, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x02 (500 ns)
found->	vendor=0x10de, dev=0x0057, revid=0xa3
	bus=0, slot=10, func=0
	class=06-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base b0004000, size 12, enabled
	map[14]: type 4, range 32, base 00001c38, size  3, enabled
pcib0: matched entry for 0.10.INTA (src \\_SB_.PCI0.LMAC:0)
pci_link8: Picked IRQ 20 with weight 1
pcib0: slot 10 INTA routed to irq 20 via \\_SB_.PCI0.LMAC
found->	vendor=0x10de, dev=0x005d, revid=0xa3
	bus=0, slot=14, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x0e (3500 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1100, revid=0x00
	bus=0, slot=24, func=0
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1101, revid=0x00
	bus=0, slot=24, func=1
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1102, revid=0x00
	bus=0, slot=24, func=2
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1103, revid=0x00
	bus=0, slot=24, func=3
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1100, revid=0x00
	bus=0, slot=25, func=0
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1101, revid=0x00
	bus=0, slot=25, func=1
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1102, revid=0x00
	bus=0, slot=25, func=2
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1103, revid=0x00
	bus=0, slot=25, func=3
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0: <memory> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xb0000000-0xb0000fff irq 20 at device 2.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xb0000000
ioapic0: routing intpin 20 (PCI IRQ 20) to vector 49
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
ehci0: <NVIDIA nForce4 USB 2.0 controller> mem 0xb0001000-0xb00010ff irq 21 at device 2.1 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xb0001000
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 50
ehci0: [GIANT-LOCKED]
usb1: EHCI version 1.0
usb1: companion controller, 4 ports each: usb0
usb1: <NVIDIA nForce4 USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
uhub1: device problem (SHORT_XFER), disabling port 8
pcm0: <nVidia nForce4> port 0x1800-0x18ff,0x1400-0x14ff mem 0xb0002000-0xb0002fff irq 22 at device 4.0 on pci0
pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x1800
pcm0: Reserved 0x100 bytes for rid 0x14 type 4 at 0x1400
ioapic0: routing intpin 22 (PCI IRQ 22) to vector 51
pcm0: [MPSAFE]
pcm0: <Analog Devices AD1981B AC97 Codec (id = 0x41445374)>
pcm0: Codec features headphone, 20 bit DAC, 5 bit master volume, no 3D Stereo Enhancement
pcm0: Primary codec extended features variable rate PCM, reserved 1, AMAP, reserved 4
pcm0: ac97 codec dac ready count: 0
pcm0: sndbuf_setmap aff68000, 4000; 0xffffffffb3602000 -> aff68000
pcm0: sndbuf_setmap aff64000, 4000; 0xffffffffb3606000 -> aff64000
atapci0: <nVidia nForce CK804 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1c00-0x1c0f at device 6.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1c00
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=01
ata0: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x01 err=0x04 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=10 stat1=01 devices=0x4<ATAPI_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 52
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=60 ostat1=70
ata1: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
ata1: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
ata1: reset tp2 stat0=20 stat1=30 devices=0x0
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 53
ata1: [MPSAFE]
atapci1: <nVidia nForce CK804 SATA300 controller> port 0x1c30-0x1c37,0x1c24-0x1c27,0x1c28-0x1c2f,0x1c20-0x1c23,0x1c10-0x1c1f mem 0xb0003000-0xb0003fff irq 23 at device 8.0 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1c10
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 54
atapci1: [MPSAFE]
atapci1: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xb0003000
ata2: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1c30
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x1c24
ata2: SATA connect ready time=0ms
ata2: sata_connect devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata3: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x1c28
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x1c20
ata3: SATA connect status=00000000
ata3: [MPSAFE]
pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xf000-0xfff
pcib1:   memory decode     0xb0100000-0xb01fffff
pcib1:   prefetched decode 0xfff00000-0xfffff
pcib1:   Subtractively decoded bridge.
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
found->	vendor=0x104c, dev=0x8023, revid=0x00
	bus=1, slot=5, func=0
	class=0c-00-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0116, statreg=0x0210, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
	intpin=a, irq=12
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base b0104000, size 11, enabled
pcib1: (null) requested memory range 0xb0104000-0xb01047ff: good
	map[14]: type 1, range 32, base b0100000, size 14, enabled
pcib1: (null) requested memory range 0xb0100000-0xb0103fff: good
pcib1: matched entry for 1.5.INTA (src \\_SB_.PCI0.LNK4:0)
pci_link3: Picked IRQ 16 with weight 0
ioapic0: Changing polarity for pin 16 to high
pcib1: slot 5 INTA routed to irq 16 via \\_SB_.PCI0.LNK4
fwohci0: <Texas Instruments TSB43AB22/A> mem 0xb0104000-0xb01047ff,0xb0100000-0xb0103fff irq 16 at device 5.0 on pci1
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xb0104000
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 55
fwohci0: [MPSAFE]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:e0:81:00:00:24:15:fb
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:e0:81:24:15:fb
fwe0: bpf attached
fwe0: Ethernet address: 02:e0:81:24:15:fb
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
nve0: <NVIDIA nForce MCP9 Networking Adapter> port 0x1c38-0x1c3f mem 0xb0004000-0xb0004fff irq 20 at device 10.0 on pci0
nve0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xb0004000
nve0: Ethernet address 00:e0:81:57:42:c2
miibus0: <MII bus> on nve0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x005043, model 0x000c, rev. 1
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
nve0: bpf attached
nve0: Ethernet address: 00:e0:81:57:42:c2
nve0: [MPSAFE]
pcib2: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0xf000-0xfff
pcib2:   memory decode     0xb1000000-0xb2ffffff
pcib2:   prefetched decode 0xc0000000-0xcfffffff
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
found->	vendor=0x10de, dev=0x0161, revid=0xa1
	bus=2, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type 1, range 32, base b2000000, size 24, enabled
pcib2: (null) requested memory range 0xb2000000-0xb2ffffff: good
	map[14]: type 3, range 64, base c0000000, size 28, enabled
pcib2: (null) requested memory range 0xc0000000-0xcfffffff: good
	map[1c]: type 1, range 64, base b1000000, size 24, enabled
pcib2: (null) requested memory range 0xb1000000-0xb1ffffff: good
pcib2: matched entry for 2.0.INTA (src \\_SB_.PCI0.LNK3:0)
pci_link2: Picked IRQ 17 with weight 0
ioapic0: Changing polarity for pin 17 to high
pcib2: slot 0 INTA routed to irq 17 via \\_SB_.PCI0.LNK3
pci2: <display, VGA> at device 0.0 (no driver attached)
pcib3: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib3: could not get PCI interrupt routing table for \\_SB_.PCI2 - AE_NOT_FOUND
pci8: <ACPI PCI bus> on pcib3
pci8: physical bus=8
found->	vendor=0x1022, dev=0x7450, revid=0x12
	bus=8, slot=10, func=0
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0117, statreg=0x0230, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x7451, revid=0x01
	bus=8, slot=10, func=1
	class=08-00-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type 1, range 64, base d0000000, size 12, enabled
found->	vendor=0x1022, dev=0x7450, revid=0x12
	bus=8, slot=11, func=0
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0117, statreg=0x0230, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x7451, revid=0x01
	bus=8, slot=11, func=1
	class=08-00-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type 1, range 64, base d0001000, size 12, enabled
pcib4: <ACPI PCI-PCI bridge> at device 10.0 on pci8
pcib4:   secondary bus     9
pcib4:   subordinate bus   9
pcib4:   I/O decode        0xf000-0xfff
pcib4:   memory decode     0xfff00000-0xfffff
pcib4:   prefetched decode 0xfff00000-0xfffff
pci9: <ACPI PCI bus> on pcib4
pci9: physical bus=9
pci8: <base peripheral, interrupt controller> at device 10.1 (no driver attached)
pcib5: <ACPI PCI-PCI bridge> at device 11.0 on pci8
pcib5:   secondary bus     10
pcib5:   subordinate bus   10
pcib5:   I/O decode        0xf000-0xfff
pcib5:   memory decode     0xfff00000-0xfffff
pcib5:   prefetched decode 0xfff00000-0xfffff
pci10: <ACPI PCI bus> on pcib5
pci10: physical bus=10
pci8: <base peripheral, interrupt controller> at device 11.1 (no driver attached)
pcib6: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci128: <ACPI PCI bus> on pcib6
pci128: physical bus=128
found->	vendor=0x10de, dev=0x005e, revid=0xa3
	bus=128, slot=0, func=0
	class=05-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x00d3, revid=0xa3
	bus=128, slot=1, func=0
	class=05-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[14]: type 1, range 32, base d0400000, size 12, enabled
found->	vendor=0x10de, dev=0x0057, revid=0xa3
	bus=128, slot=10, func=0
	class=06-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base d0401000, size 12, enabled
	map[14]: type 4, range 32, base 00002000, size  3, enabled
pcib6: matched entry for 128.10.INTA (src \\_SB_.PCI1.LMAC:0)
pci_link22: Picked IRQ 52 with weight 0
ioapic3: Changing polarity for pin 20 to high
pcib6: slot 10 INTA routed to irq 52 via \\_SB_.PCI1.LMAC
found->	vendor=0x10de, dev=0x005d, revid=0xa3
	bus=128, slot=14, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
pci128: <memory> at device 0.0 (no driver attached)
pci128: <memory> at device 1.0 (no driver attached)
nve1: <NVIDIA nForce MCP9 Networking Adapter> port 0x2000-0x2007 mem 0xd0401000-0xd0401fff irq 52 at device 10.0 on pci128
nve1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd0401000
nve1: Ethernet address 00:e0:81:57:42:c3
miibus1: <MII bus> on nve1
ukphy1: <Generic IEEE 802.3u media interface> on miibus1
ukphy1: OUI 0x005043, model 0x000c, rev. 1
ukphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
nve1: bpf attached
nve1: Ethernet address: 00:e0:81:57:42:c3
ioapic3: routing intpin 20 (PCI IRQ 52) to vector 56
nve1: [MPSAFE]
pcib7: <ACPI PCI-PCI bridge> at device 14.0 on pci128
pcib7:   secondary bus     129
pcib7:   subordinate bus   129
pcib7:   I/O decode        0xf000-0xfff
pcib7:   memory decode     0xfff00000-0xfffff
pcib7:   prefetched decode 0xfff00000-0xfffff
pci129: <ACPI PCI bus> on pcib7
pci129: physical bus=129
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 57
atkbd0: [GIANT-LOCKED]
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 58
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
ioapic0: routing intpin 6 (ISA IRQ 6) to vector 59
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
sio: sio0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xcf000-0xd07ff on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
fb: new array size 4
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
uhub2: vendor 0x04e1 product 0x0201, class 9/0, rev 1.10/1.10, addr 2
uhub2: 4 ports with 4 removable, self powered
ums0: PRIMAX Cherry USB Mouse, rev 2.00/1.10, addr 3, iclass 3/1
ums0: 5 buttons and Z dir.
ums1: WACOM CTE-440-U V4.0-3, rev 1.10/4.03, addr 4, iclass 3/1
ums1: 3 buttons and Z dir.
Device configuration finished.
Reducing kern.maxvnodes 233016 -> 100000
procfs registered
lapic: Divisor 2, Frequency 100463129 hz
Timecounter "TSC" frequency 1808343170 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad0: 238475MB <Seagate ST3250824AS 3.AAD> at ata2-master SATA300
ad0: 488397168 sectors [484521C/16H/63S] 16 sectors/interrupt 1 depth queue
pcm0: measured ac97 link rate at 48004 Hz, will use 48000 Hz
(probe0:ata0:0:0:0): error 22
(probe0:ata0:0:0:0): Unretryable Error
(probe0:ata0:0:0:0): error 6
(probe0:ata0:0:0:0): Unretryable Error
(probe0:ata0:0:0:0): error 22
(probe0:ata0:0:0:0): Unretryable Error
GEOM: new disk ad0
(probe1:sbp0:0:0:0): error 22
(probe1:sbp0:0:0:0): Unretryable Error
(probe2:sbp0:0:1:0): error 22
(probe2:sbp0:0:1:0): Unretryable Error
(probe3:sbp0:0:2:0): error 22
(probe3:sbp0:0:2:0): Unretryable Error
(probe4:sbp0:0:3:0): error 22
(probe4:sbp0:0:3:0): Unretryable Error
(probe5:sbp0:0:4:0): error 22
(probe5:sbp0:0:4:0): Unretryable Error
(probe6:sbp0:0:5:0): error 22
(probe6:sbp0:0:5:0): Unretryable Error
(probe7:sbp0:0:6:0): error 22
(probe7:sbp0:0:6:0): Unretryable Error
pass0 at ata0 bus 0 target 0 lun 0
pass0: <TSSTcorp CD/DVDW SH-W162C TS10> Removable CD-ROM SCSI-0 device 
pass0: 3.300MB/s transfers
GEOM: new disk cd0
SMP: AP CPU #1 Launched!
cpu1 AP:
     ID: 0x01000000   VER: 0x00040010 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #2 Launched!
cpu2 AP:
     ID: 0x02000000   VER: 0x00040010 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #3 Launched!
cpu3 AP:
     ID: 0x03000000   VER: 0x00040010 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000
INTR: Assigning IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 1 to local APIC 0
INTR: Assigning IRQ 4 to local APIC 1
ioapic0: Assigning ISA IRQ 4 to local APIC 1
INTR: Assigning IRQ 6 to local APIC 2
ioapic0: Assigning ISA IRQ 6 to local APIC 2
INTR: Assigning IRQ 9 to local APIC 3
ioapic0: Assigning ISA IRQ 9 to local APIC 3
INTR: Assigning IRQ 14 to local APIC 0
ioapic0: Assigning ISA IRQ 14 to local APIC 0
INTR: Assigning IRQ 15 to local APIC 1
ioapic0: Assigning ISA IRQ 15 to local APIC 1
INTR: Assigning IRQ 16 to local APIC 2
ioapic0: Assigning PCI IRQ 16 to local APIC 2
INTR: Assigning IRQ 20 to local APIC 3
ioapic0: Assigning PCI IRQ 20 to local APIC 3
INTR: Assigning IRQ 21 to local APIC 0
ioapic0: Assigning PCI IRQ 21 to local APIC 0
INTR: Assigning IRQ 22 to local APIC 1
ioapic0: Assigning PCI IRQ 22 to local APIC 1
INTR: Assigning IRQ 23 to local APIC 2
ioapic0: Assigning PCI IRQ 23 to local APIC 2
INTR: Assigning IRQ 52 to local APIC 3
ioapic3: Assigning PCI IRQ 52 to local APIC 3
(cd0:ata0:0:0:0): error 6
(cd0:ata0:0:0:0): Unretryable Error
cd0 at ata0 bus 0 target 0 lun 0
cd0: <TSSTcorp CD/DVDW SH-W162C TS10> Removable CD-ROM SCSI-0 device 
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
(cd0:ata0:0:0:0): error 6
(cd0:ata0:0:0:0): Unretryable Error
(cd0:ata0:0:0:0): error 6
(cd0:ata0:0:0:0): Unretryable Error
Trying to mount root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
kldload: Unsupported file type
splash: image decoder found: daemon_saver
nve0: device timeout (1)
nve0: link state changed to DOWN
nve0: link state changed to UP

mptable:

Code:

===============================================================================

MPTable

-------------------------------------------------------------------------------

MP Floating Pointer Structure:

  location:			BIOS
  physical address:		0x000f77b0
  signature:			'_MP_'
  length:			16 bytes
  version:			1.4
  checksum:			0x69
  mode:				Virtual Wire

-------------------------------------------------------------------------------

MP Config Table Header:

  physical address:		0x0009bd71
  signature:			'PCMP'
  base table length:		348
  version:			1.4
  checksum:			0x3f
  OEM ID:			'nVIDIA  '
  Product ID:			'CK804-2P    '
  OEM table pointer:		0x00000000
  OEM table size:		0
  entry count:			32
  local APIC address:		0xfee00000
  extended table length:	216
  extended table checksum:	101

-------------------------------------------------------------------------------

MP Config Base Table Entries:

--
Processors:	APIC ID	Version	State		Family	Model	Step	Flags
		 0	 0x10	 BSP, usable	 15	 1	 2	 0x178bfbff
		 1	 0x10	 AP, usable	 15	 1	 2	 0x178bfbff
		 2	 0x10	 AP, usable	 15	 1	 2	 0x178bfbff
		 3	 0x10	 AP, usable	 15	 1	 2	 0x178bfbff
--
Bus:		Bus ID	Type
		 0	 PCI   
		 1	 PCI   
		 2	 PCI   
		 8	 PCI   
		128	 PCI   
		129	 ISA   
--
I/O APICs:	APIC ID	Version	State		Address
		 4	 0x11	 usable		 0xfec00000
		 5	 0x11	 usable		 0xd0000000
		 6	 0x11	 usable		 0xd0001000
		 7	 0x11	 usable		 0xd0400000
--
I/O Ints:	Type	Polarity    Trigger	Bus ID	 IRQ	APIC ID	PIN#
		ExtINT	active-hi        edge	   129	   0	      4	   0
		INT	active-hi        edge	   129	   1	      4	   1
		INT	active-hi        edge	   129	   2	      4	   2
		INT	active-hi        edge	   129	   3	      4	   3
		INT	active-hi        edge	   129	   4	      4	   4
		INT	active-hi        edge	   129	   5	      4	   5
		INT	active-hi        edge	   129	   6	      4	   6
		INT	active-hi        edge	   129	   7	      4	   7
		INT	active-hi        edge	   129	   8	      4	   8
		INT	active-hi        edge	   129	   9	      4	   9
		INT	active-hi        edge	   129	  10	      4	  10
		INT	active-hi        edge	   129	  11	      4	  11
		INT	active-hi        edge	   129	  12	      4	  12
		INT	active-hi        edge	   129	  13	      4	  13
		INT	active-hi        edge	   129	  14	      4	  14
		INT	active-hi        edge	   129	  15	      4	  15
--
Local Ints:	Type	Polarity    Trigger	Bus ID	 IRQ	APIC ID	PIN#
		ExtINT	active-hi        edge	   129	   0	    255	   0
		NMI	active-hi        edge	   129	   0	    255	   1

-------------------------------------------------------------------------------

MP Config Extended Table Entries:

--
System Address Space
 bus ID: 0 address type: I/O address
 address base: 0x0
 address range: 0x10000
--
System Address Space
 bus ID: 0 address type: I/O address
 address base: 0x0
 address range: 0x10000
--
System Address Space
 bus ID: 0 address type: memory address
 address base: 0x0
 address range: 0xc0000000
--
System Address Space
 bus ID: 0 address type: prefetch address
 address base: 0xc0000000
 address range: 0x10000000
--
System Address Space
 bus ID: 8 address type: memory address
 address base: 0xd0000000
 address range: 0x400000
--
System Address Space
 bus ID: 0 address type: memory address
 address base: 0xd0400000
 address range: 0x2ea00000
--
System Address Space
 bus ID: 0 address type: memory address
 address base: 0xfee01000
 address range: 0x11ff000
--
System Address Space
 bus ID: 0 address type: memory address
 address base: 0xa0000
 address range: 0x60000
--
Bus Heirarchy
 bus ID: 129 bus info: 0x01 parent bus ID: 0
--
Compatibility Bus Address
 bus ID: 0 address modifier: add
 predefined range: 0x00000000
--
Compatibility Bus Address
 bus ID: 0 address modifier: add
 predefined range: 0x00000001
--
Compatibility Bus Address
 bus ID: 8 address modifier: subtract
 predefined range: 0x00000000
--
Compatibility Bus Address
 bus ID: 8 address modifier: subtract
 predefined range: 0x00000001
--
Compatibility Bus Address
 bus ID: 128 address modifier: subtract
 predefined range: 0x00000000
--
Compatibility Bus Address
 bus ID: 128 address modifier: subtract
 predefined range: 0x00000001

===============================================================================

pciconf -lv

Code:

none0@pci0:0:0:	class=0x058000 card=0x289510f1 chip=0x005e10de rev=0xa3 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    device   = 'nForce4 Memory Controller'
    class    = memory
isab0@pci0:1:0:	class=0x060100 card=0x289510f1 chip=0x005110de rev=0xa3 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    class    = bridge
    subclass = PCI-ISA
none1@pci0:1:1:	class=0x0c0500 card=0x289510f1 chip=0x005210de rev=0xa2 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    device   = 'nForce4 SMBus'
    class    = serial bus
    subclass = SMBus
ohci0@pci0:2:0:	class=0x0c0310 card=0x289510f1 chip=0x005a10de rev=0xa2 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    device   = 'nForce4 USB Controller'
    class    = serial bus
    subclass = USB
ehci0@pci0:2:1:	class=0x0c0320 card=0x289510f1 chip=0x005b10de rev=0xa3 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    device   = 'nForce4 USB 2.0 Controller'
    class    = serial bus
    subclass = USB
pcm0@pci0:4:0:	class=0x040100 card=0x289510f1 chip=0x005910de rev=0xa2 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    device   = 'nForce4 AC'97 Audio Controller'
    class    = multimedia
    subclass = audio
atapci0@pci0:6:0:	class=0x01018a card=0x289510f1 chip=0x005310de rev=0xf2 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    device   = 'nForce4 Parallel ATA Controller'
    class    = mass storage
    subclass = ATA
atapci1@pci0:8:0:	class=0x010185 card=0x289510f1 chip=0x005510de rev=0xf3 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    device   = 'nForce4 Serial ATA Controller'
    class    = mass storage
    subclass = ATA
pcib1@pci0:9:0:	class=0x060401 card=0x00000000 chip=0x005c10de rev=0xa2 hdr=0x01
    vendor   = 'NVIDIA Corporation'
    device   = 'nForce4 PCI Bridge'
    class    = bridge
    subclass = PCI-PCI
nve0@pci0:10:0:	class=0x068000 card=0x289510f1 chip=0x005710de rev=0xa3 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    device   = 'nForce4 Ethernet Controller'
    class    = bridge
pcib2@pci0:14:0:	class=0x060400 card=0x00000040 chip=0x005d10de rev=0xa3 hdr=0x01
    vendor   = 'NVIDIA Corporation'
    device   = 'nForce4 PCI Express Bridge'
    class    = bridge
    subclass = PCI-PCI
hostb0@pci0:24:0:	class=0x060000 card=0x00000000 chip=0x11001022 rev=0x00 hdr=0x00
    vendor   = 'Advanced Micro Devices (AMD)'
    device   = 'Athlon 64 / Opteron HyperTransport Technology Configuration'
    class    = bridge
    subclass = HOST-PCI
hostb1@pci0:24:1:	class=0x060000 card=0x00000000 chip=0x11011022 rev=0x00 hdr=0x00
    vendor   = 'Advanced Micro Devices (AMD)'
    device   = 'Athlon 64 / Opteron Address Map'
    class    = bridge
    subclass = HOST-PCI
hostb2@pci0:24:2:	class=0x060000 card=0x00000000 chip=0x11021022 rev=0x00 hdr=0x00
    vendor   = 'Advanced Micro Devices (AMD)'
    device   = 'Athlon 64 / Opteron DRAM Controller'
    class    = bridge
    subclass = HOST-PCI
hostb3@pci0:24:3:	class=0x060000 card=0x00000000 chip=0x11031022 rev=0x00 hdr=0x00
    vendor   = 'Advanced Micro Devices (AMD)'
    device   = 'Athlon 64 / Opteron Miscellaneous Control'
    class    = bridge
    subclass = HOST-PCI
hostb4@pci0:25:0:	class=0x060000 card=0x00000000 chip=0x11001022 rev=0x00 hdr=0x00
    vendor   = 'Advanced Micro Devices (AMD)'
    device   = 'Athlon 64 / Opteron HyperTransport Technology Configuration'
    class    = bridge
    subclass = HOST-PCI
hostb5@pci0:25:1:	class=0x060000 card=0x00000000 chip=0x11011022 rev=0x00 hdr=0x00
    vendor   = 'Advanced Micro Devices (AMD)'
    device   = 'Athlon 64 / Opteron Address Map'
    class    = bridge
    subclass = HOST-PCI
hostb6@pci0:25:2:	class=0x060000 card=0x00000000 chip=0x11021022 rev=0x00 hdr=0x00
    vendor   = 'Advanced Micro Devices (AMD)'
    device   = 'Athlon 64 / Opteron DRAM Controller'
    class    = bridge
    subclass = HOST-PCI
hostb7@pci0:25:3:	class=0x060000 card=0x00000000 chip=0x11031022 rev=0x00 hdr=0x00
    vendor   = 'Advanced Micro Devices (AMD)'
    device   = 'Athlon 64 / Opteron Miscellaneous Control'
    class    = bridge
    subclass = HOST-PCI
fwohci0@pci1:5:0:	class=0x0c0010 card=0x289510f1 chip=0x8023104c rev=0x00 hdr=0x00
    vendor   = 'Texas Instruments (TI)'
    device   = 'TSB43AB22/A IEEE1394a-2000 OHCI PHY/Link-Layer Ctrlr'
    class    = serial bus
    subclass = FireWire
none2@pci2:0:0:	class=0x030000 card=0x21471682 chip=0x016110de rev=0xa1 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    device   = 'GeForce 6200 TurboCache(TM)'
    class    = display
    subclass = VGA
pcib4@pci8:10:0:	class=0x060400 card=0x000000a0 chip=0x74501022 rev=0x12 hdr=0x01
    vendor   = 'Advanced Micro Devices (AMD)'
    device   = 'AMD-8131 PCI-X Bridge'
    class    = bridge
    subclass = PCI-PCI
none3@pci8:10:1:	class=0x080010 card=0x289510f1 chip=0x74511022 rev=0x01 hdr=0x00
    vendor   = 'Advanced Micro Devices (AMD)'
    device   = 'AMD-8131 PCI-X IOAPIC'
    class    = base peripheral
    subclass = interrupt controller
pcib5@pci8:11:0:	class=0x060400 card=0x000000a0 chip=0x74501022 rev=0x12 hdr=0x01
    vendor   = 'Advanced Micro Devices (AMD)'
    device   = 'AMD-8131 PCI-X Bridge'
    class    = bridge
    subclass = PCI-PCI
none4@pci8:11:1:	class=0x080010 card=0x289510f1 chip=0x74511022 rev=0x01 hdr=0x00
    vendor   = 'Advanced Micro Devices (AMD)'
    device   = 'AMD-8131 PCI-X IOAPIC'
    class    = base peripheral
    subclass = interrupt controller
none5@pci128:0:0:	class=0x058000 card=0x289510f1 chip=0x005e10de rev=0xa3 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    device   = 'nForce4 Memory Controller'
    class    = memory
none6@pci128:1:0:	class=0x058000 card=0x289510f1 chip=0x00d310de rev=0xa3 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    device   = 'nForce4 Memory Controller'
    class    = memory
nve1@pci128:10:0:	class=0x068000 card=0x289510f1 chip=0x005710de rev=0xa3 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    device   = 'nForce4 Ethernet Controller'
    class    = bridge
pcib7@pci128:14:0:	class=0x060400 card=0x00000040 chip=0x005d10de rev=0xa3 hdr=0x01
    vendor   = 'NVIDIA Corporation'
    device   = 'nForce4 PCI Express Bridge'
    class    = bridge
    subclass = PCI-PCI

Anmerkungen:
Unter 6.0 bootet das System nicht, seid 6.1 funktioniert es einwandfrei. Lediglich die Netzwerkkarten sind nicht besten, wer ernsthaft auf das Netzwerk angewiesen ist, sollte dort in bessere inverstieren.

Bummibaer · 13 November 2006

Hersteller: Intel - http://www.intel.com/
Produktlink: http://www.intel.com/support/motherboards/server/se7320vp2/index.htm
Bios: 1.33
FreeBSD 6.1 Release - P10 (AMD64)
Intel SE7320VP2-D2 (Volcano Peak) Mainboard
2 x Intel Xeon 3,80 GHz 2MB FSB800
8192 MB ECC Registered DDR2 RAM (4x 2048MB)
3Ware 9550SX-8LP mit BBU
6 x ST3400633AS à 400 GB, S-ATA, Firmware 3.AAD

Code:

Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RELEASE-p10 #6: Fri Oct 13 16:41:20 CEST 2006
    bummibaer@DualXeonBaer.local:/usr/obj/usr/src/sys/DualXeonBaer
WARNING: debug.mpsafenet forced to 0 as ipsec requires Giant
WARNING: MPSAFE network stack disabled, expect reduced performance.
ACPI APIC Table: <A M I  OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 3.80GHz (3790.51-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0xf43  Stepping = 3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x659d<SSE3,RSVD2,MON,DS_CPL,EST,TM2,CNTX-ID,CX16,<b14>>
  AMD Features=0x20000800<SYSCALL,LM>
  Logical CPUs per core: 2
real memory  = 9663676416 (9216 MB)
avail memory = 8283590656 (7899 MB)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  6
 cpu3 (AP): APIC ID:  7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
netsmb_dev: loaded
kbd1 at kbdmux0
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <unknown> at device 0.1 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <network, ethernet> at device 0.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci3: <ACPI PCI bus> on pcib3
3ware device driver for 9000 series storage controllers, version: 3.60.02.012
twa0: <3ware 9000 series Storage Controller> port 0xdf80-0xdfbf mem 0xdc000000-0xddffffff,0xdeeff000-0xdeefffff irq 24 at device 1.0 on pci3
twa0: [FAST]
twa0: INFO: (0x15: 0x1300): Controller details:: Model 9550SX-8LP, 8 ports, Firmware FE9X 3.01.01.028, BIOS BE9X 3.01.00.024
uhci0: <UHCI (generic) USB controller> port 0xbf00-0xbf1f irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xbf80-0xbf9f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <base peripheral> at device 29.4 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 29.5 (no driver attached)
ehci0: <Intel 6300ESB USB 2.0 controller> mem 0xdecffc00-0xdecfffff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <Intel 6300ESB USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pci4: <display, VGA> at device 2.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port 0xee80-0xeebf mem 0xdefa0000-0xdefbffff irq 17 at device 3.0 on pci4
em0: [GIANT-LOCKED]
em0: Ethernet address: 00:0e:0c:6a:ac:e9
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 6300ESB UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
ichsmb0: <Intel 6300ESB (ICH) SMBus controller> port 0x400-0x41f irq 17 at device 31.3 on pci0
ichsmb0: [GIANT-LOCKED]
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xca7ff,0xca800-0xcb7ff,0xcb800-0xcc7ff on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
module_register_init: MOD_LOAD (amr_linux, 0xffffffff8068faac, 0) error 6
IPsec: Initialized Security Association Processing.
acd0: DVDR <SONY DVD RW DW-Q58A/VYS3> at ata1-master UDMA33
da0 at twa0 bus 0 target 0 lun 0
da0: <AMCC 9550SX-8LP DISK 3.01> Fixed Direct Access SCSI-3 device 
da0: 100.000MB/s transfers
da0: 1907295MB (3906140160 512 byte sectors: 255H 63S/T 243145C)
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Trying to mount root from ufs:/dev/da0s1a
em0: link state changed to UP

MPTABLE

Code:

MPTable

-------------------------------------------------------------------------------

MP Floating Pointer Structure:

  location:                     BIOS
  physical address:             0x000ff780
  signature:                    '_MP_'
  length:                       16 bytes
  version:                      1.4
  checksum:                     0x19
  mode:                         Virtual Wire

-------------------------------------------------------------------------------

MP Config Table Header:

  physical address:             0x000fd8a0
  signature:                    'PCMP'
  base table length:            372
  version:                      1.4
  checksum:                     0x60
  OEM ID:                       'INTEL   '
  Product ID:                   'SE7320VP20  '
  OEM table pointer:            0x00000000
  OEM table size:               0
  entry count:                  38
  local APIC address:           0xfee00000
  extended table length:        104
  extended table checksum:      64

-------------------------------------------------------------------------------

MP Config Base Table Entries:

--
Processors:     APIC ID Version State           Family  Model   Step    Flags
                 0       0x14    BSP, usable     3       1       4       0xebfbff00
                 6       0x14    AP, usable      3       1       4       0xebfbff00
--
Bus:            Bus ID  Type
                 0       PCI   
                 1       PCI   
                 2       PCI   
                 3       PCI   
                 4       PCI   
                 5       ISA   
--
I/O APICs:      APIC ID Version State           Address
                 8       0x20    usable          0xfec00000
                 9       0x20    usable          0xfec10000
--
I/O Ints:       Type    Polarity    Trigger     Bus ID   IRQ    APIC ID PIN#
                ExtINT   conforms        edge        5     0          8    0
                INT      conforms    conforms        5     1          8    1
                INT      conforms    conforms        5     0          8    2
                INT      conforms    conforms        5     3          8    3
                INT      conforms    conforms        5     4          8    4
                INT     active-lo       level        5     5          8    5
                INT      conforms    conforms        5     6          8    6
                INT     active-lo       level        5     7          8    7
                INT     active-hi        edge        5     8          8    8
                INT     active-lo       level        5     9          8    9
                INT     active-lo       level        5    10          8   10
                INT     active-lo       level        5    11          8   11
                INT      conforms    conforms        5    12          8   12
                INT      conforms    conforms        5    13          8   13
                INT      conforms    conforms        5    14          8   14
                INT      conforms    conforms        5    15          8   15
                INT     active-lo       level        0   2:A          8   16
                INT     active-lo       level        0   3:A          8   16
                INT     active-lo       level        0  31:A          8   18
                INT     active-lo       level        0  31:B          8   17
                INT     active-lo       level        0  29:A          8   16
                INT     active-lo       level        0  29:B          8   19
                INT     active-lo       level        0  29:D          8   23
                INT     active-lo       level        4   3:A          8   17
                INT     active-lo       level        4   2:A          8   16
                INT     active-lo       level        2   0:A          8   16
                INT     active-lo       level        3   1:A          9    0
--
Local Ints:     Type    Polarity    Trigger     Bus ID   IRQ    APIC ID PIN#
                NMI      conforms    conforms        0   0:A        255    1

-------------------------------------------------------------------------------

MP Config Extended Table Entries:

--
System Address Space
 bus ID: 0 address type: I/O address
 address base: 0x0
 address range: 0xffff
--
System Address Space
 bus ID: 0 address type: memory address
 address base: 0xa0000
 address range: 0x20000
--
System Address Space
 bus ID: 0 address type: memory address
 address base: 0xde000000
 address range: 0x2000000
--
System Address Space
 bus ID: 0 address type: prefetch address
 address base: 0xdc000000
 address range: 0x2000000
--
Bus Heirarchy
 bus ID: 5 bus info: 0x01 parent bus ID: 0
--
Compatibility Bus Address
 bus ID: 0 address modifier: add
 predefined range: 0x00000000
--
Compatibility Bus Address
 bus ID: 0 address modifier: add
 predefined range: 0x00000001

PCICONF -lv

Code:

hostb0@pci0:0:0:        class=0x060000 card=0x34508086 chip=0x35928086 rev=0x0c hdr=0x00
    vendor   = 'Intel Corporation'
    device   = 'E732x Server Memory Controller Hub'
    class    = bridge
    subclass = HOST-PCI
none0@pci0:0:1: class=0xff0000 card=0x34508086 chip=0x35938086 rev=0x0c hdr=0x00
    vendor   = 'Intel Corporation'
    device   = 'E752x Memory Controller Hub Error Reporting Registers'
pcib1@pci0:2:0: class=0x060400 card=0x00000050 chip=0x35958086 rev=0x0c hdr=0x01
    vendor   = 'Intel Corporation'
    device   = 'E752x Memory Controller Hub PCI Express Port A0'
    class    = bridge
    subclass = PCI-PCI
pcib2@pci0:3:0: class=0x060400 card=0x00000050 chip=0x35968086 rev=0x0c hdr=0x01
    vendor   = 'Intel Corporation'
    device   = 'E752x Memory Controller Hub PCI Express Port A1'
    class    = bridge
    subclass = PCI-PCI
pcib3@pci0:28:0:        class=0x060400 card=0x00000050 chip=0x25ae8086 rev=0x02 hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '6300ESB Hub Interface to PCI-X Bridge'
    class    = bridge
    subclass = PCI-PCI
uhci0@pci0:29:0:        class=0x0c0300 card=0x34508086 chip=0x25a98086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '6300ESB USB 1.1 UHCI Controller'
    class    = serial bus
    subclass = USB
uhci1@pci0:29:1:        class=0x0c0300 card=0x34508086 chip=0x25aa8086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '5300ESB USB 1.1 UHCI Controller'
    class    = serial bus
    subclass = USB
none1@pci0:29:4:        class=0x088000 card=0x34508086 chip=0x25ab8086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '6300ESB Watchdog Timer'
    class    = base peripheral
none2@pci0:29:5:        class=0x080020 card=0x34508086 chip=0x25ac8086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '6300ESB APIC1'
    class    = base peripheral
    subclass = interrupt controller
ehci0@pci0:29:7:        class=0x0c0320 card=0x34508086 chip=0x25ad8086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '6300ESB USB 2.0 EHCI Controller'
    class    = serial bus
    subclass = USB
pcib4@pci0:30:0:        class=0x060400 card=0x00000000 chip=0x244e8086 rev=0x0a hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82801BA/CA/DB/DBL/EB/ER/FB (ICH2/3/4/4/5/5/6), 6300ESB Hub Interface to PCI Bridge'
    class    = bridge
    subclass = PCI-PCI
isab0@pci0:31:0:        class=0x060100 card=0x00000000 chip=0x25a18086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '6300ESB LPC Interface Bridge'
    class    = bridge
    subclass = PCI-ISA
atapci0@pci0:31:1:      class=0x01018a card=0x34508086 chip=0x25a28086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '6300ESB IDE Controller'
    class    = mass storage
    subclass = ATA
ichsmb0@pci0:31:3:      class=0x0c0500 card=0x34508086 chip=0x25a48086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '6300ESB SMBus Controller'
    class    = serial bus
    subclass = SMBus
none3@pci2:0:0: class=0x020000 card=0x34668086 chip=0x436111ab rev=0x18 hdr=0x00
    vendor   = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
    device   = '88E8036 Marvell Yukon -EC 88E8050 PCI Express Gigabit Ethernet Controller'
    class    = network
    subclass = ethernet
twa0@pci3:1:0:  class=0x010400 card=0x100313c1 chip=0x100313c1 rev=0x00 hdr=0x00
    vendor   = '3ware Inc.'
    class    = mass storage
    subclass = RAID
none4@pci4:2:0: class=0x030000 card=0x34508086 chip=0x47521002 rev=0x27 hdr=0x00
    vendor   = 'ATI Technologies Inc'
    device   = 'Rage XL PCI'
    class    = display
    subclass = VGA
em0@pci4:3:0:   class=0x020000 card=0x34668086 chip=0x10768086 rev=0x05 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82547EI Gigabit Ethernet Controller'
    class    = network
    subclass = ethernet

Die eine Marvell NIC funktioniert derzeit noch nicht. Der onboard Controller wird nicht verwendet.

Gruß Bummibär

Multiprozessorboards für xBSD

Yamagi

Possessed With Psi Powers

Yamagi

Possessed With Psi Powers

Bummibaer

Well-Known Member

Wir schützen deine Privatsphäre