NTP Zeitsync ?

cat1510

cat1510

Well-Known Member
Habe hier mehrere BSD Computer im Netz und mochte, dass die sich alle nach meinem lokalen Server syncen. Hat jemand einen Tip oder eine Idee, wie ich das realisieren kann?

Danke.

CAT
 
ich hab das mal auf meinem Client so eingerichtet, wie auf dem Server.
Der bekommt aber keine Zeit. Keine Ahnung woran das liegt.
 
Ein bisschen lang aber hier ist der Debug Bericht:

[root@hacker1]~# /usr/local/bin/ntpd -c /etc/ntp.conf -g -q -D 2
Debug1: 2 -> 2 = 2
ntpd 4.2.0@1.1161-r Tue May 4 22:16:05 CEST 2004 (1)
Debug1: 2 -> 2 = 2
addto_syslog: ntpd 4.2.0@1.1161-r Tue May 4 22:16:05 CEST 2004 (1)
addto_syslog: mlockall(): Resource temporarily unavailable
addto_syslog: set_process_priority: Leave priority alone: priority_done is <2>
addto_syslog: precision = 1.397 usec
create_sockets(123)
addto_syslog: no IPv6 interfaces found
addto_syslog: bind() fd 4, family 2, port 123, addr 0.0.0.0, in_classd=0 flags=8 fails: Address already in use
addto_syslog: bind() fd 4, family 2, port 123, addr 0.0.0.0, in_classd=0 flags=8 fails: Address already in use
addto_syslog: bind() fd 4, family 2, port 123, addr 10.0.0.10, in_classd=0 flags=8 fails: Address already in use
addto_syslog: bind() fd 4, family 2, port 123, addr 127.0.0.1, in_classd=0 flags=0 fails: Address already in use
create_sockets: ninterfaces=4
interface 0: fd=-1, bfd=-1, name=wildcard, flags=0x8
sin=0.0.0.0 bcast=0.0.0.0, mask=255.255.255.255
interface 1: fd=-1, bfd=-1, name=nv0, flags=0x9
sin=0.0.0.0 bcast=255.255.255.255, mask=255.0.0.0
interface 2: fd=-1, bfd=-1, name=xl0, flags=0x9
sin=10.0.0.10 bcast=10.0.255.255, mask=255.255.0.0
interface 3: fd=-1, bfd=-1, name=lo0, flags=0x5
sin=127.0.0.1 mask=255.0.0.0
init_io: maxactivefd 0
local_clock: at 0 state 0
Debug2: 2 -> 2 = 2
getnetnum given ntp.tuxfamily.net, got 80.67.179.98
key_expire: at 0
peer_clear: at 0 assoc ID 15236 refid INIT
newpeer: 10.0.0.10->80.67.179.98 mode 3 vers 4 poll 6 10 flags 0x281 0x1 ttl 0 key 00000000
getnetnum given fartein.ifi.uio.no, got 129.240.64.3
key_expire: at 0
peer_clear: at 0 assoc ID 15237 refid INIT
newpeer: 10.0.0.10->129.240.64.3 mode 3 vers 4 poll 6 10 flags 0x201 0x1 ttl 0 key 00000000
getnetnum given bear.zoo.bt.co.uk, got 132.146.236.132
key_expire: at 0
peer_clear: at 0 assoc ID 15238 refid INIT
newpeer: 10.0.0.10->132.146.236.132 mode 3 vers 4 poll 6 10 flags 0x201 0x1 ttl 0 key 00000000
addto_syslog: Frequency format error in /var/db/ntp.drift
report_event: system event 'event_restart' (0x01) status 'sync_alarm, sync_unspec, 1 event, event_unspec' (0xc010)
MCAST *****sendpkt(fd=-1 dst=80.67.179.98, src=10.0.0.10, ttl=0, len=48)
addto_syslog: sendto(80.67.179.98): Bad file descriptor
transmit: at 1 10.0.0.10->80.67.179.98 mode 3
poll_update: at 1 80.67.179.98 flags 0281 poll 6 burst 8 last 1 next 3
auth_agekeys: at 1 keys 1 expired 0
timer: refresh ts 0
MCAST *****sendpkt(fd=-1 dst=129.240.64.3, src=10.0.0.10, ttl=0, len=48)
addto_syslog: sendto(129.240.64.3): Bad file descriptor
transmit: at 2 10.0.0.10->129.240.64.3 mode 3
poll_update: at 2 129.240.64.3 flags 0201 poll 6 burst 8 last 2 next 4
MCAST *****sendpkt(fd=-1 dst=132.146.236.132, src=10.0.0.10, ttl=0, len=48)
addto_syslog: sendto(132.146.236.132): Bad file descriptor
transmit: at 3 10.0.0.10->132.146.236.132 mode 3
poll_update: at 3 132.146.236.132 flags 0201 poll 6 burst 8 last 3 next 5
MCAST *****sendpkt(fd=-1 dst=80.67.179.98, src=10.0.0.10, ttl=0, len=48)
addto_syslog: sendto(80.67.179.98): Bad file descriptor
transmit: at 3 10.0.0.10->80.67.179.98 mode 3
poll_update: at 3 80.67.179.98 flags 0281 poll 6 burst 7 last 3 next 5
MCAST *****sendpkt(fd=-1 dst=129.240.64.3, src=10.0.0.10, ttl=0, len=48)
addto_syslog: sendto(129.240.64.3): Bad file descriptor
transmit: at 4 10.0.0.10->129.240.64.3 mode 3
poll_update: at 4 129.240.64.3 flags 0201 poll 6 burst 7 last 4 next 6
MCAST *****sendpkt(fd=-1 dst=132.146.236.132, src=10.0.0.10, ttl=0, len=48)
addto_syslog: sendto(132.146.236.132): Bad file descriptor
transmit: at 5 10.0.0.10->132.146.236.132 mode 3
poll_update: at 5 132.146.236.132 flags 0201 poll 6 burst 7 last 5 next 7
MCAST *****sendpkt(fd=-1 dst=80.67.179.98, src=10.0.0.10, ttl=0, len=48)
addto_syslog: sendto(80.67.179.98): Bad file descriptor
transmit: at 5 10.0.0.10->80.67.179.98 mode 3
poll_update: at 5 80.67.179.98 flags 0281 poll 6 burst 6 last 5 next 7
MCAST *****sendpkt(fd=-1 dst=129.240.64.3, src=10.0.0.10, ttl=0, len=48)
addto_syslog: sendto(129.240.64.3): Bad file descriptor
transmit: at 6 10.0.0.10->129.240.64.3 mode 3
poll_update: at 6 129.240.64.3 flags 0201 poll 6 burst 6 last 6 next 8
MCAST *****sendpkt(fd=-1 dst=132.146.236.132, src=10.0.0.10, ttl=0, len=48)
addto_syslog: sendto(132.146.236.132): Bad file descriptor
transmit: at 7 10.0.0.10->132.146.236.132 mode 3
poll_update: at 7 132.146.236.132 flags 0201 poll 6 burst 6 last 7 next 9
MCAST *****sendpkt(fd=-1 dst=80.67.179.98, src=10.0.0.10, ttl=0, len=48)
addto_syslog: sendto(80.67.179.98): Bad file descriptor
transmit: at 7 10.0.0.10->80.67.179.98 mode 3
poll_update: at 7 80.67.179.98 flags 0281 poll 6 burst 5 last 7 next 9
MCAST *****sendpkt(fd=-1 dst=129.240.64.3, src=10.0.0.10, ttl=0, len=48)
addto_syslog: sendto(129.240.64.3): Bad file descriptor
transmit: at 8 10.0.0.10->129.240.64.3 mode 3
poll_update: at 8 129.240.64.3 flags 0201 poll 6 burst 5 last 8 next 10
MCAST *****sendpkt(fd=-1 dst=132.146.236.132, src=10.0.0.10, ttl=0, len=48)
addto_syslog: sendto(132.146.236.132): Bad file descriptor
transmit: at 9 10.0.0.10->132.146.236.132 mode 3
poll_update: at 9 132.146.236.132 flags 0201 poll 6 burst 5 last 9 next 11
MCAST *****sendpkt(fd=-1 dst=80.67.179.98, src=10.0.0.10, ttl=0, len=48)
addto_syslog: sendto(80.67.179.98): Bad file descriptor
transmit: at 9 10.0.0.10->80.67.179.98 mode 3
poll_update: at 9 80.67.179.98 flags 0281 poll 6 burst 4 last 9 next 11
MCAST *****sendpkt(fd=-1 dst=129.240.64.3, src=10.0.0.10, ttl=0, len=48)
addto_syslog: sendto(129.240.64.3): Bad file descriptor
transmit: at 10 10.0.0.10->129.240.64.3 mode 3
poll_update: at 10 129.240.64.3 flags 0201 poll 6 burst 4 last 10 next 12
MCAST *****sendpkt(fd=-1 dst=132.146.236.132, src=10.0.0.10, ttl=0, len=48)
addto_syslog: sendto(132.146.236.132): Bad file descriptor
transmit: at 11 10.0.0.10->132.146.236.132 mode 3
poll_update: at 11 132.146.236.132 flags 0201 poll 6 burst 4 last 11 next 13
MCAST *****sendpkt(fd=-1 dst=80.67.179.98, src=10.0.0.10, ttl=0, len=48)
addto_syslog: sendto(80.67.179.98): Bad file descriptor
transmit: at 11 10.0.0.10->80.67.179.98 mode 3
poll_update: at 11 80.67.179.98 flags 0281 poll 6 burst 3 last 11 next 13
MCAST *****sendpkt(fd=-1 dst=129.240.64.3, src=10.0.0.10, ttl=0, len=48)
addto_syslog: sendto(129.240.64.3): Bad file descriptor
transmit: at 12 10.0.0.10->129.240.64.3 mode 3
poll_update: at 12 129.240.64.3 flags 0201 poll 6 burst 3 last 12 next 14
MCAST *****sendpkt(fd=-1 dst=132.146.236.132, src=10.0.0.10, ttl=0, len=48)
addto_syslog: sendto(132.146.236.132): Bad file descriptor
transmit: at 13 10.0.0.10->132.146.236.132 mode 3
poll_update: at 13 132.146.236.132 flags 0201 poll 6 burst 3 last 13 next 15
MCAST *****sendpkt(fd=-1 dst=80.67.179.98, src=10.0.0.10, ttl=0, len=48)
addto_syslog: sendto(80.67.179.98): Bad file descriptor
transmit: at 13 10.0.0.10->80.67.179.98 mode 3
poll_update: at 13 80.67.179.98 flags 0281 poll 6 burst 2 last 13 next 15
MCAST *****sendpkt(fd=-1 dst=129.240.64.3, src=10.0.0.10, ttl=0, len=48)
addto_syslog: sendto(129.240.64.3): Bad file descriptor
transmit: at 14 10.0.0.10->129.240.64.3 mode 3
poll_update: at 14 129.240.64.3 flags 0201 poll 6 burst 2 last 14 next 16
MCAST *****sendpkt(fd=-1 dst=132.146.236.132, src=10.0.0.10, ttl=0, len=48)
addto_syslog: sendto(132.146.236.132): Bad file descriptor
transmit: at 15 10.0.0.10->132.146.236.132 mode 3
poll_update: at 15 132.146.236.132 flags 0201 poll 6 burst 2 last 15 next 17
MCAST *****sendpkt(fd=-1 dst=80.67.179.98, src=10.0.0.10, ttl=0, len=48)
addto_syslog: sendto(80.67.179.98): Bad file descriptor
transmit: at 15 10.0.0.10->80.67.179.98 mode 3
poll_update: at 15 80.67.179.98 flags 0281 poll 6 burst 1 last 15 next 17
MCAST *****sendpkt(fd=-1 dst=129.240.64.3, src=10.0.0.10, ttl=0, len=48)
addto_syslog: sendto(129.240.64.3): Bad file descriptor
transmit: at 16 10.0.0.10->129.240.64.3 mode 3
poll_update: at 16 129.240.64.3 flags 0201 poll 6 burst 1 last 16 next 18
MCAST *****sendpkt(fd=-1 dst=132.146.236.132, src=10.0.0.10, ttl=0, len=48)
addto_syslog: sendto(132.146.236.132): Bad file descriptor
transmit: at 17 10.0.0.10->132.146.236.132 mode 3
poll_update: at 17 132.146.236.132 flags 0201 poll 6 burst 1 last 17 next 19
poll_update: at 17 80.67.179.98 flags 0281 poll 6 burst 0 last 15 next 81
poll_update: at 17 80.67.179.98 flags 0281 poll 6 burst 0 last 15 next 81
poll_update: at 18 129.240.64.3 flags 0201 poll 6 burst 0 last 16 next 81
poll_update: at 18 129.240.64.3 flags 0201 poll 6 burst 0 last 16 next 81
poll_update: at 19 132.146.236.132 flags 0201 poll 6 burst 0 last 17 next 83
addto_syslog: no reply; clock not set
 
Hat sich schon erledigt.

Habe es auf noch einem anderen BSD Rechner getestet. Da ging es komischereise.
Den Fehler habe ich auch gefunden. NTP hat das falsche Interface benutzt.

Danke.

CAT
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Zurück
Oben