FreeBSD 7.1 auf Dell Inspiron mit Ati Mobility Radeon X300 und AlpsPad

L

Locutus01

Active Member
Hallo!

Ich versuche verzweifelt eine funktionierende xorg.conf zusabmmen zu bringen. Sowohl über Xorg -configure, als auch xorgconfig bekomme ich keine lauffähige Version. X startet zwar aber weiterhin ist nichts möglich. Maus bewegt sich nicht und Eingaben im Xterm sind auch nicht möglich.

Der Versuch eine funktionierende Knoppix xorg.conf umzuschreiben hat leider auch nicht funktioniert.

Kann mir da bitte jemand weiter helfen oder sogar eine funktierende xorg.conf geben?
 
Ich habe die Updating gelesen aber keinen Hinweis auf Touchpad oder die Radeon gesehen. Habe ich etwas übersehen?
 
Welche Xorg Version verwendest du? morromet meinte vermutlich die Infos um Update auf Xorg 7.4. Schau dazu auch hier im Forum, da gabs einige Threads dazu.
Wenn du Xorg 7.4 hast wirds wohl an hal liegen ;-)

mousaka
 
Gute Frage, da ich hier gerade mittels Knoppix poste. Habe mir heute die aktuellen Ports geholt und daraus installiert. Die Frage ist dann wenn es 7.4 ist geht es mit irgendeinem Downgrade oder darf ich mich weinend von BSD verabschieden und mich auf Gentoo zurück ziehen? Wäre schade!
 
Oooops. habe das gerade gelesen un dbin vieleicht gerade über die vollkommene Newbie Stufe hinweg, aber das sagt mir überhaupt nichts. Kann mir irgend jemand bitte erklären was zu tun ist um die Sachen zum laufen zu bringen?
Bin bei 6.2. ausgestiegen und wollte jetzt eigentlich reumütig zu FreeBSD zurück kehren, allerdings komme ich alleine nicht wieter. :(
 
Aus deinem ersten Posting gehe ich davon aus, dass grafikseitig alles i.O. ist. Es haber t "nur" an Maus und Tastatur, oder?

Hast du HAL und DBUS gestartet?
Schau dir mal Post #68 im erwähnten Thread, damit die Tastatur ihren Dienst wunschgemäss verrichtet.

Oder du entscheidest dich gegen HAL und Konsorte und hast folgende Zeilen in deiner xorg.conf (vorerst der schnellere Weg)
Code: 
Section "ServerFlags"
	Option      "AutoAddDevices"	"off"
EndSection

Du bekommst das auch ohne Downgrade zum Laufen.:)
mousaka
 
Habe nicht aufgegeben, weil ich will unbedingt wieder BSD haben. ;) Da ich aber zumindest für den Moment das Internet brauche bis ich einfunktionierendes X habe, habe ich ein Dualboot System gemacht und auf die schnelle FreeBSD 7.1 inklusive X aus den Packages installiert. Danach dbus und hald in der rc.conf aktiviert.
Xorg - configure und welch ein Wunder die Tastatur funktioniert schon mal. Dies bringt aber Fragen auf:

1. Wo ist der Unterschied bei der Installation von XOrg 7.4 wenn man aus den Ports bzw mittles Package installiert? Aus den Ports hat es nicht funktioniert und mit dem Package habe ich zumindest Tastatur. Wohlgemerkt bei gleicher Konfigurationsweise.

2. Wenn ich das BSD nun anpasse und ein make world mache, ist alles wiede hinüber?

3. hald tauch nicht als Prozess auf und ist auch nicht im /var/run/hald/ als PID zu sehen!?!

4. Wie bekomme ich nun noch abschließend das Touchpad zum laufen? Dann hätte ihr mich für das Wochende schon mal rundum glücklich gemacht! ;)
 
Damit dein Touchpad funzt musste folgendes in die rc.conf schreiben:

Code: 
moused_enable="YES"
moused_type="glidepoint"
moused_flags="-a 2,2"

Das dumme ist, dass er dann versucht auch usbmäuse mit dem glidepoint treiber anzusprechen, deswegen hab ich mit in die devd.conf folgendes gepackt (geändert):

Code: 
# The entry below starts moused when a mouse is plugged in. Moused
# stops automatically (actually it bombs :) when the device disappears.
attach 100 {
        device-name "ums[0-9]+";
#       action "/etc/rc.d/moused start $device-name";
        action "/usr/sbin/moused -t auto -p /dev/$device-name -I /var/run/$device-name.pid";
};

Zusätzlich könntest du noch folgendes in der rc.conf gebrauchen:
Code: 
powerd_enable="YES"
powerd_flags="-a adaptive -b adaptive -r 40 -i 60"
ifconfig_iwi0="WPA DHCP -bgscan"

das -bgscan verhindert, das die Verbindung andauernd unterbricht
 
FreeBSDuser schrieb:
Damit dein Touchpad funzt musste folgendes in die rc.conf schreiben:

Code: 
moused_enable="YES"
moused_type="glidepoint"
moused_flags="-a 2,2"

Das dumme ist, dass er dann versucht auch usbmäuse mit dem glidepoint treiber anzusprechen, deswegen hab ich mit in die devd.conf folgendes gepackt (geändert):

Code: 
# The entry below starts moused when a mouse is plugged in. Moused
# stops automatically (actually it bombs :) when the device disappears.
attach 100 {
        device-name "ums[0-9]+";
#       action "/etc/rc.d/moused start $device-name";
        action "/usr/sbin/moused -t auto -p /dev/$device-name -I /var/run/$device-name.pid";
};

Zusätzlich könntest du noch folgendes in der rc.conf gebrauchen:
Code: 
powerd_enable="YES"
powerd_flags="-a adaptive -b adaptive -r 40 -i 60"
ifconfig_iwi0="WPA DHCP -bgscan"

das -bgscan verhindert, das die Verbindung andauernd unterbricht
Zum Vergrößern anklicken....

Ok, danke. Bevor ich das jetzt ausprobiere, wie muss dann die InputDevice Section in der xorg.conf aussehen? Oder klappt das jetzt mit dem Xorg -configure?

@Elwood: Ja ich habe den hald eingetragen.
 
Super, vielen Dank es klappt jetzt bis auf eine Kleinigkeit. das Scrolling des TouchPad geht noch nicht. Gibt es da auch eine Loesung?
 
Bei mir auch nicht, hab noch keine Lust gehabt mich drum zu kümmern. Könnte sein, dass der synaptics Treiber in den Ports hilft.
 
Ich habe jetzt mal das FreeBSD komplett neu aus den Ports gebaut, war vorher nur al sTest gedacht. Habe das xorg mit touchpad und kezboard nach einigem Gew[rge auch wieder hinbekommen. Habe aber leider jetyt das Phaenomen, das tapping als klick auf einen Button nur dann funktioniert, wenn ich anschliessend die Maus ein wenig bewege.

Und das deutsch Layout funktioniert trotz umgesetzen Hinweis leider noch nicht, sowie das Scrolling.
Waere fuer abschliessende Hinweise sehr dankbar.
 
Hier mal meine Dateien fuer evtl. Fehlererkennung:

xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "AlpsPad" "synaptics"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "ServerFlags"
Option "AllowEmptyInput" "false"
EndSection

Section "Files"
ModulePath "/usr/local/lib/xorg/modules"
FontPath "/usr/local/lib/X11/fonts/misc/"
FontPath "/usr/local/lib/X11/fonts/TTF/"
FontPath "/usr/local/lib/X11/fonts/OTF"
FontPath "/usr/local/lib/X11/fonts/Type1/"
FontPath "/usr/local/lib/X11/fonts/100dpi/"
FontPath "/usr/local/lib/X11/fonts/75dpi/"
EndSection

Section "Module"
Load "extmod"
Load "record"
Load "dbe"
Load "glx"
Load "xtrap"
Load "dri"
Load "freetype"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "InputDevice"
Identifier "AlpsPad"
Driver "synaptics"
Option "Protocol" "auto-dev"
Option "Device" "/dev/psm0"
Option "LeftEdge" "130"
Option "RightEdge" "840"
Option "TopEdge" "130"
Option "BottomEdge" "640"
Option "FingerLow" "7"
Option "FingerHigh" "8"
Option "MaxTapeTime" "180"
Option "MaxTapeMove" "110"
Option "EmulateMidButtonTime" "75"
Option "VertScrollDelta" "20"
Option "HorizScrollDelta" "20"
Option "MinSpeed" "0.60"
Option "MaxSpeed" "1.10"
Option "AccelFactor" "0.030"
Option "EdgeMotionMinSpeed" "200"
Option "EdgeMotionMaxSpeed" "200"
Option "UpDownScrolling" "1"
Option "CircularScrolling" "1"
Option "CircScrollDelta" "0.1"
Option "CircScrollTrigger" "2"
Option "SHMConfig" "on"
Option "Emulate3Buttons" "on"
Option "SendCoreEvents" "true"
EndSection

Section "Monitor"
#DisplaySize 370 230 # mm
Identifier "Monitor0"
VendorName "LPL"
ModelName "0"
EndSection

Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # <i>
#Option "AGPMode" # <i>
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # <i>
#Option "GARTSize" # <i>
#Option "RingSize" # <i>
#Option "BufferSize" # <i>
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # <i>
#Option "DepthBits" # <i>
#Option "PCIAPERSize" # <i>
#Option "AccelDFS" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # <i>
#Option "RageTheatreCrystal" # <i>
#Option "RageTheatreTunerPort" # <i>
#Option "RageTheatreCompositePort" # <i>
#Option "RageTheatreSVideoPort" # <i>
#Option "TunerType" # <i>
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # <i>
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "DynamicClocks" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "DRI" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "TVDACLoadDetect" # [<bool>]
#Option "ForceTVOut" # [<bool>]
#Option "TVStandard" # <str>
#Option "IgnoreLidStatus" # [<bool>]
#Option "DefaultTVDACAdj" # [<bool>]
#Option "Int10" # [<bool>]
#Option "EXAVSync" # [<bool>]
#Option "ATOMTVOut" # [<bool>]
#Option "R4xxATOM" # [<bool>]
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "M22 [Mobility Radeon X300]"
BusID "PCI:1:0:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection

rc.conf


# -- sysinstall generated deltas -- # Sat Mar 14 14:33:21 2009
# Created: Sat Mar 14 14:33:21 2009
# Enable network daemons for user convenience.
# Please make all changes to this file, not to /etc/defaults/rc.conf.
# This file now contains just the overrides from /etc/defaults/rc.conf.
keymap="german.iso"
linux_enable="YES"
hald_enable="YES"
dbus_enable="YES"
moused_enable="YES"
moused_type="glidepoint"
moused_flags="-a 2,2"
powerd_enable="YES"
powerd_flags="-a adaptive -b adaptive -r 40 -i 60"
polkitd_enable="YES"
ifconfig_iwi0="inet 192.168.2.200 netmask 255.255.255.0 ssid Repeater wepmode on wepkey 0xxxxxxxxxxxxxxxxxxxxxxxxxx weptxkey 1 -bgscan"
defaultrouter="192.168.2.1"

devd.conf

# $FreeBSD: src/etc/devd.conf,v 1.38.2.1.2.1 2008/11/25 02:59:29 kensmith Exp $
#
# Refer to devd.conf(5) and devd(8) man pages for the details on how to
# run and configure devd.
#

# NB: All regular expressions have an implicit ^$ around them.
# NB: device-name is shorthand for 'match device-name'

options {
# Each directory directive adds a directory the list of directories
# that we scan for files. Files are read-in in the order that they
# are returned from readdir(3). The rule-sets are combined to
# create a DFA that's used to match events to actions.
directory "/etc/devd";
directory "/usr/local/etc/devd";
pid-file "/var/run/devd.pid";

# Setup some shorthand for regex that we use later in the file.
#XXX Yes, these are gross -- imp
set scsi-controller-regex
"(aac|adv|adw|aha|ahb|ahc|ahd|aic|amd|amr|asr|bt|ciss|ct|dpt|\
esp|ida|iir|ips|isp|mlx|mly|mpt|ncr|ncv|nsp|stg|sym|trm|wds)\
[0-9]+";
};

# Note that the attach/detach with the highest value wins, so that one can
# override these general rules.

#
# Configure the interface on attach. Due to a historical accident, this
# script is called pccard_ether.
#
notify 0 {
match "system" "IFNET";
match "type" "ATTACH";
action "/etc/pccard_ether $subsystem start";
};

notify 0 {
match "system" "IFNET";
match "type" "DETACH";
action "/etc/pccard_ether $subsystem stop";
};

#
# Try to start dhclient on Ethernet like interfaces when the link comes
# up. Only devices that are configured to support DHCP will actually
# run it. No link down rule exists because dhclient automaticly exits
# when the link goes down.
#
notify 0 {
match "system" "IFNET";
match "type" "LINK_UP";
media-type "ethernet";
action "/etc/rc.d/dhclient start $subsystem";
};

#
# Like Ethernet devices, but separate because
# they have a different media type. We may want
# to exploit this later.
#
detach 0 {
media-type "802.11";
action "/etc/pccard_ether $device-name stop";
};
attach 0 {
media-type "802.11";
action "/etc/pccard_ether $device-name start";
};
notify 0 {
match "system" "IFNET";
match "type" "LINK_UP";
media-type "802.11";
action "/etc/rc.d/dhclient start $subsystem";
};

# An entry like this might be in a different file, but is included here
# as an example of how to override things. Normally 'ed50' would match
# the above attach/detach stuff, but the value of 100 makes it
# hard wired to 1.2.3.4.
attach 100 {
device-name "ed50";
action "ifconfig $device-name inet 1.2.3.4 netmask 0xffff0000";
};
detach 100 {
device-name "ed50";
};

# When a USB Bluetooth dongle appears activate it
attach 100 {
device-name "ubt[0-9]+";
action "/etc/rc.d/bluetooth start $device-name";
};
detach 100 {
device-name "ubt[0-9]+";
action "/etc/rc.d/bluetooth stop $device-name";
};

# When a USB keyboard arrives, attach it as the console keyboard.
attach 100 {
device-name "ukbd0";
action "/etc/rc.d/syscons setkeyboard /dev/ukbd0";
};
detach 100 {
device-name "ukbd0";
action "/etc/rc.d/syscons setkeyboard /dev/kbd0";
};

# The entry below starts moused when a mouse is plugged in. Moused
# stops automatically (actually it bombs :) when the device disappears.
attach 100 {
device-name "ums[0-9]+";
action "/usr/sbin/moused -t auto -p /dev/$device-name -I /var/run/$device-name.pid";
};

# Firmware download into the ActiveWire board. After the firmware download is
# done the device detaches and reappears as something new and shiny
# automatically.
attach 100 {
match "vendor" "0x0854";
match "product" "0x0100";
match "release" "0x0000";
action "/usr/local/bin/ezdownload -f /usr/local/share/usb/firmware/0854.0100.0_01.hex $device-name";
};

# Firmware download for Entrega Serial DB25 adapter.
attach 100 {
match "vendor" "0x1645";
match "product" "0x8001";
match "release" "0x0101";
action "if ! kldstat -n usio > /dev/null 2>&1 ; then kldload usio; fi /usr/sbin/ezdownload -v -f /usr/share/usb/firmware/1645.8001.0101 /dev/$device-name";
};

# This entry starts the ColdSync tool in daemon mode. Make sure you have an up
# to date /usr/local/etc/palms. We override the 'listen' settings for port and
# type in /usr/local/etc/coldsync.conf.
attach 100 {
device-name "ugen[0-9]+";
match "vendor" "0x082d";
match "product" "0x0100";
match "release" "0x0100";
action "/usr/local/bin/coldsync -md -p /dev/$device-name -t usb";
};

#
# Rescan scsi device-names on attach, but not detach. However, it is
# disabled by default due to reports of problems.
#
attach 0 {
device-name "$scsi-controller-regex";
// action "camcontrol rescan all";
};

# Don't even try to second guess what to do about drivers that don't
# match here. Instead, pass it off to syslog. Commented out for the
# moment, as the pnpinfo variable isn't set in devd yet. Individual
# variables within the bus supplied pnpinfo are set.
nomatch 0 {
# action "logger Unknown device: $pnpinfo $location $bus";
};

# Various logging of unknown devices.
nomatch 10 {
match "bus" "uhub[0-9]+";
action "logger Unknown USB device: vendor $vendor product $product \
bus $bus";
};

# Some PC-CARDs don't offer numerical manufacturer/product IDs, just
# show the CIS info there.
nomatch 20 {
match "bus" "pccard[0-9]+";
match "manufacturer" "0xffffffff";
match "product" "0xffffffff";
action "logger Unknown PCCARD device: CISproduct $cisproduct \
CIS-vendor $cisvendor bus $bus";
};

nomatch 10 {
match "bus" "pccard[0-9]+";
action "logger Unknown PCCARD device: manufacturer $manufacturer \
product $product CISproduct $cisproduct CIS-vendor \
$cisvendor bus $bus";
};

nomatch 10 {
match "bus" "cardbus[0-9]+";
action "logger Unknown Cardbus device: device $device class $class \
vendor $vendor bus $bus";
};

# Switch power profiles when the AC line state changes.
notify 10 {
match "system" "ACPI";
match "subsystem" "ACAD";
action "/etc/rc.d/power_profile $notify";
};

# Notify all users before beginning emergency shutdown when we get
# a _CRT or _HOT thermal event and we're going to power down the system
# very soon.
notify 10 {
match "system" "ACPI";
match "subsystem" "Thermal";
match "notify" "0xcc";
action "logger -p kern.emerg 'WARNING: system temperature too high, shutting down soon!'";
};

# Sample ZFS problem reports handling.
notify 10 {
match "system" "ZFS";
match "type" "zpool";
action "logger -p kern.err 'ZFS: failed to load zpool $pool'";
};

notify 10 {
match "system" "ZFS";
match "type" "vdev";
action "logger -p kern.err 'ZFS: vdev failure, zpool=$pool type=$type'";
};

notify 10 {
match "system" "ZFS";
match "type" "data";
action "logger -p kern.warn 'ZFS: zpool I/O failure, zpool=$pool error=$zio_err'";
};

notify 10 {
match "system" "ZFS";
match "type" "io";
action "logger -p kern.warn 'ZFS: vdev I/O failure, zpool=$pool path=$vdev_path offset=$zio_offset size=$zio_size error=$zio_err'";
};

notify 10 {
match "system" "ZFS";
match "type" "checksum";
action "logger -p kern.warn 'ZFS: checksum mismatch, zpool=$pool path=$vdev_path offset=$zio_offset size=$zio_size'";
};

# User requested suspend, so perform preparation steps and then execute
# the actual suspend process.
notify 10 {
match "system" "ACPI";
match "subsystem" "Suspend";
action "/etc/rc.suspend acpi $notify";
};
notify 10 {
match "system" "ACPI";
match "subsystem" "Resume";
action "/etc/rc.resume acpi $notify";
};

# The next blocks enable volume hotkeys that can be found on the Asus EeePC
notify 0 {
match "system" "ACPI";
match "subsystem" "ASUS-Eee";
match "notify" "0x13";
action "mixer 0";
};

notify 0 {
match "system" "ACPI";
match "subsystem" "ASUS-Eee";
match "notify" "0x14";
action "mixer vol -10";
};

notify 0 {
match "system" "ACPI";
match "subsystem" "ASUS-Eee";
match "notify" "0x15";
action "mixer vol +10";
};

/* EXAMPLES TO END OF FILE

# The following might be an example of something that a vendor might
# install if you were to add their device. This might reside in
# /usr/local/etc/devd/deqna.conf. A deqna is, in this hypothetical
# example, a pccard ethernet-like device. Students of history may
# know other devices by this name, and will get the in-jokes in this
# entry.
nomatch 10 {
match "bus" "pccard[0-9]+";
match "manufacturer" "0x1234";
match "product" "0x2323";
action "kldload if_deqna";
};
attach 10 {
device-name "deqna[0-9]+";
action "/etc/pccard_ether $device-name start";
};
detach 10 {
device-name "deqna[0-9]+";
action "/etc/pccard_ether $device-name stop";
};

# Examples of notify hooks. A notify is a generic way for a kernel
# subsystem to send event notification to userland.
#
# Here are some examples of ACPI notify handlers. ACPI subsystems that
# generate notifies include the AC adapter, power/sleep buttons,
# control method batteries, lid switch, and thermal zones.
#
# Information returned is not always the same as the ACPI notify
# events. See the ACPI specification for more information about
# notifies. Here is the information returned for each subsystem:
#
# ACAD: AC line state (0 is offline, 1 is online)
# Button: Button pressed (0 for power, 1 for sleep)
# CMBAT: ACPI battery events
# Lid: Lid state (0 is closed, 1 is open)
# Suspend, Resume: Suspend and resume notification
# Thermal: ACPI thermal zone events
#
# This example calls a script when the AC state changes, passing the
# notify value as the first argument. If the state is 0x00, it might
# call some sysctls to implement economy mode. If 0x01, it might set
# the mode to performance.
notify 10 {
match "system" "ACPI";
match "subsystem" "ACAD";
action "/etc/acpi_ac $notify";
};
*/


loader.conf

legal.intel_iwi.license_ack=1
firmware_load="YES"
if_iwi_load="YES"
wlan_scan_ap_load="YES"
wlan_scan_str="YES"
wlan_wep_load="YES"
wlan_ccmp_load=YES"
wlan_tkip_load="YES"
synaptics_load="YES"

Xorg.log

_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6

X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: FreeBSD 7.1-RELEASE i386
Current Operating System: FreeBSD 7.1-RELEASE FreeBSD 7.1-RELEASE #1: Sun Mar 15 02:49:43 CET 2009 root@:/usr/obj/usr/src/sys/WLAN i386
Build Date: 15 March 2009 11:15:40AM

Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 15 18:40:54 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "AlpsPad"
(**) |-->Input Device "Keyboard0"
(**) Option "AllowEmptyInput" "false"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/local/lib/X11/fonts/misc/,/usr/local/lib/X11/fonts/TTF/,/usr/local/lib/X11/fonts/OTF,/usr/local/lib/X11/fonts/Type1/,/usr/local/lib/X11/fonts/100dpi/,/usr/local/lib/X11/fonts/75dpi/.
(**) FontPath set to:
/usr/local/lib/X11/fonts/misc/,
/usr/local/lib/X11/fonts/TTF/,
/usr/local/lib/X11/fonts/OTF,
/usr/local/lib/X11/fonts/Type1/,
/usr/local/lib/X11/fonts/100dpi/,
/usr/local/lib/X11/fonts/75dpi/,
/usr/local/lib/X11/fonts/misc/,
/usr/local/lib/X11/fonts/TTF/,
/usr/local/lib/X11/fonts/OTF,
/usr/local/lib/X11/fonts/Type1/,
/usr/local/lib/X11/fonts/100dpi/,
/usr/local/lib/X11/fonts/75dpi/
(**) ModulePath set to "/usr/local/lib/xorg/modules"
(==) |-->Input Device "<default pointer>"
(==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
(II) Loader magic: 0x81bede0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on freebsd
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9

(--) PCI:*(0@1:0:0) ATI Technologies Inc M22 [Mobility Radeon X300] rev 0, Mem @ 0xd0000000/0, 0xdfdf0000/0, I/O @ 0x0000de00/0, BIOS @ 0x????????/131072
(II) System resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "extmod"

(II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"

(II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension RECORD
(II) LoadModule: "dbe"

(II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"

(II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(==) AIGLX disabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "xtrap"

(II) Loading /usr/local/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DEC-XTRAP
(II) LoadModule: "dri"

(II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "freetype"

(II) Loading /usr/local/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "radeon"

(II) Loading /usr/local/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 6.12.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 4.1
(II) LoadModule: "synaptics"

(II) Loading /usr/local/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.99.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(II) LoadModule: "kbd"

(II) Loading /usr/local/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(II) LoadModule: "mouse"

(II) Loading /usr/local/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI FirePro V8750 (FireGL),
ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
ATI Mobility RADEON HD 4850 X2, ATI Radeon 4800 Series,
ATI FirePro RV770, AMD FireStream 9270, AMD FireStream 9250,
ATI FirePro V8700 (FireGL), ATI Mobility RADEON HD 4870,
ATI Mobility RADEON M98, ATI FirePro M7750, ATI M98, ATI M98,
ATI M98, ATI Radeon RV730 (AGP), ATI FirePro M5750,
ATI Radeon RV730 (AGP), ATI RV730XT [Radeon HD 4670],
ATI RADEON E4600, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
ATI Mobility Radeon 4500 Series, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics
(II) Primary Device is: PCI 01@00:00:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX
[8] -1 0 0x00000000 - 0x000000ff (0x100) IX
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS
(II) Setting vga for screen 0.
(II) RADEON(0): TOTO SAYS 00000000dfdf0000
(II) RADEON(0): MMIO registers at 0x00000000dfdf0000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(==) RADEON(0): Depth 24, (==) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"

(II) Loading /usr/local/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.1.0
ABI class: X.Org Video Driver, version 4.1
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon Mobility X300 (M22) 5460 (PCIE)" (ChipID = 0x5460)
(--) RADEON(0): Linear framebuffer at 0x00000000d0000000
(II) RADEON(0): PCIE card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"

(II) Loading /usr/local/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) RADEON(0): initializing int10
(==) RADEON(0): Write-combining range (0xa0000,0x20000) was already clear
(==) RADEON(0): Write-combining range (0xc0000,0x40000) was already clear
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(==) RADEON(0): Write-combining range (0x0,0x1000) was already clear
(II) RADEON(0): Legacy BIOS detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.25.0
(==) RADEON(0): Page Flipping disabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=131072K, accessible=131072K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 131072 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) RADEON(0): Max desktop size set to 2560x1200
(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
(II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 2700, min_out_pll: 20000, max_out_pll: 35000, min_in_pll: 40, max_in_pll: 3000, xclk: 22950, sclk: 229.500000, mclk: 297.000000
(II) RADEON(0): PLL parameters: rf=2700 rd=6 min=20000 max=35000; xclk=22950
(II) RADEON(0): DFP table revision: 4
(II) RADEON(0): Panel ID string: J9662171WU1

(II) RADEON(0): Panel Size from BIOS: 1920x1200
(II) RADEON(0): BIOS provided dividers will be used.
(WW) RADEON(0): LVDS Info:
XRes: 1920, YRes: 1200, DotClock: 162000
HBlank: 240, HOverPlus: 48, HSyncWidth: 32
VBlank: 50, VOverPlus: 1, VSyncWidth: 3
(II) RADEON(0): Output VGA-0 using monitor section Monitor0
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output DVI-0 has no monitor section
(II) RADEON(0): I2C bus "DVI-0" initialized.
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): Output S-video has no monitor section
(II) RADEON(0): Default TV standard: NTSC
(II) RADEON(0): TV standards supported by chip: NTSC
(II) RADEON(0): Port0:
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_DAC1
DDC reg: 0x60
(II) RADEON(0): Port1:
XRANDR name: DVI-0
Connector: DVI-D
DFP1: INTERNAL_TMDS1
DDC reg: 0x64
(II) RADEON(0): Port2:
XRANDR name: LVDS
Connector: LVDS
LCD1: INTERNAL_LVDS
DDC reg: 0x0
(II) RADEON(0): Port3:
XRANDR name: S-video
Connector: S-video
TV1: INTERNAL_DAC2
DDC reg: 0x0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
finished output detect: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
finished output detect: 1
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
finished output detect: 2
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
finished output detect: 3
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
(II) RADEON(0): Added native panel mode: 1920x1200
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output DVI-0 disconnected
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Output S-video disconnected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output LVDS using initial mode 1920x1200
after xf86InitialConfiguration
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"

(II) Loading /usr/local/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"

(II) Loading /usr/local/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.2.0
ABI class: X.Org Video Driver, version 4.1
(==) RADEON(0): Assuming overlay scaler buffer width is 1536
(II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
(==) RADEON(0): Write-combining range (0x0,0x1000) was already clear
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS(OprU)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS(OprU)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS(OprU)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX
[8] -1 0 0x00000000 - 0x000000ff (0x100) IX
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS(OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS(OprU)
(II) RADEON(0): RADEONScreenInit d0000000 0 0
(==) RADEON(0): Write-combining range (0xa0000,0x10000) was already clear
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable LVDS
(II) RADEON(0): Dynamic Clock Scaling Disabled
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x08000000
(II) RADEON(0): MC_FB_LOCATION : 0xd7ffd000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Using 32 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 29 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1920,8191)
(II) RADEON(0): Reserved area from (0,1200) to (1920,1202)
(II) RADEON(0): Largest offscreen area available: 1920 x 6989
(II) RADEON(0): Will use front buffer at offset 0x0
(II) RADEON(0): Will use back buffer at offset 0x2454000
(II) RADEON(0): Will use depth buffer at offset 0x2d1e000
(II) RADEON(0): Will use 32 kb for PCI GART table at offset 0x7ff8000
(II) RADEON(0): Will use 75776 kb for textures at offset 0x35e8000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.2
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xd0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [pci] 32768 kB allocated with handle 0xc7a74000
(II) RADEON(0): [pci] ring handle = 0xc7a74000
(II) RADEON(0): [pci] Ring mapped at 0x30a74000
(II) RADEON(0): [pci] Ring contents 0x00000000
(II) RADEON(0): [pci] ring read ptr handle = 0xc7b75000
(II) RADEON(0): [pci] Ring read ptr mapped at 0x286ff000
(II) RADEON(0): [pci] Ring read ptr contents 0x00000000
(II) RADEON(0): [pci] vertex/indirect buffers handle = 0xc7b76000
(II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0x30b75000
(II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
(II) RADEON(0): [pci] GART texture map handle = 0xc7d76000
(II) RADEON(0): [pci] GART Texture map mapped at 0x30d75000
(II) RADEON(0): [drm] register handle = 0xdfdf0000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xd7ffd000 0x1fff0000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 16
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0xd7ffd000 is: 0xd7ffd000
(WW) RADEON(0): MC_AGP_LOCATION was: 0xffffffc0 is: 0xffffffc0
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xd7ffd000 0xd7ffd000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): XAA Render acceleration unsupported on Radeon 9500/9700 and newer. Please use EXA instead.
(II) RADEON(0): Render acceleration disabled
(WW) RADEON(0): Failed to determine num pipes from DRM, falling back to manual look-up!
(II) RADEON(0): num quad-pipes is 1
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) RADEON(0): Acceleration enabled
(II) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x008cdc00
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x008d3600
(II) RADEON(0): Largest offscreen area available: 1920 x 6983
(II) RADEON(0): Detected Radeon Mobility X300, disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"

(II) Loading /usr/local/lib/xorg/modules/multimedia//theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(II) RADEON(0): Set up overlay video
(II) RADEON(0): Set up textured video
disable primary dac
disable FP1
disable LVDS
disable TV
disable LVDS
init memmap
init common
init crtc1
init pll1
restore memmap
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xd7ffd000 0xd7ffd000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
restore common
restore crtc1
restore pll1
set RMX
set LVDS
enable LVDS
disable primary dac
disable FP1
disable TV
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) AIGLX: Loaded and initialized /usr/local/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 508 x 317
(II) Synaptics touchpad driver version 0.99.3
(**) Option "Device" "/dev/psm0"
(EE) xf86OpenSerial: Cannot open device /dev/psm0
Device busy.
(EE) Synaptics driver unable to open device
(EE) PreInit failed for input device "AlpsPad"
(II) UnloadModule: "synaptics"
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(WW) <default pointer>: No Device specified, looking for one...
(II) <default pointer>: Setting Device option to "/dev/sysmouse"
(--) <default pointer>: Device: "/dev/sysmouse"
(==) <default pointer>: Protocol: "Auto"
(**) Option "CorePointer"
(**) <default pointer>: always reports core events
(==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
(**) <default pointer>: ZAxisMapping: buttons 4 and 5
(**) <default pointer>: Buttons: 9
(**) <default pointer>: Sensitivity: 1
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) evaluating device (<default pointer>)
(II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
(II) <default pointer>: SetupAuto: hw.iftype is 4, hw.model is 0
(II) <default pointer>: SetupAuto: protocol is SysMouse
(II) config/hal: Adding input device PS/2 Mouse
(**) PS/2 Mouse: Device: "/dev/sysmouse"
(==) PS/2 Mouse: Protocol: "Auto"
(**) PS/2 Mouse: always reports core events
(**) Option "Device" "/dev/sysmouse"
(==) PS/2 Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) PS/2 Mouse: ZAxisMapping: buttons 4 and 5
(**) PS/2 Mouse: Buttons: 9
(**) PS/2 Mouse: Sensitivity: 1
(II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
(II) PS/2 Mouse: SetupAuto: hw.iftype is 4, hw.model is 0
(II) PS/2 Mouse: SetupAuto: protocol is SysMouse

Sorry das ich euch ein wenig nerve, aber ich habe jetyt eigentlich alles inkl xfce4 aufgesetzt und der Desktop legt bei manchen Aktionen ein paar Sekunden Gedenkzeit ein, usw, so dass ein gescheites arbeiten nicht machbar ist.
 
Pack die einzelnen Abschnitte doch bitte in CODE Tags.

EDIT: Und zu deinem Keyboard Layout; In der xorg.conf fehlt auch der entprechende Eintrag in der InputDevice Section.
 
Habe jetzt nahezu alles im Sytem zur Zufriedenheit zum laufen gebracht, nur das dusselige scrollen will nicht. Habe mittlerweile dutzende Empfehlungen (Google) ausprobiert, aber keine hat funktioniert. Die meisten Fundstellen benennen nur das synaptics touchpad, dabei ist es ein Alps Glidepoint, der auch so vom System erkannt wird.
Nur zur Hölle wie konfiguriere ich das Biest denn nun? Gibt es irgend jemand der das Teil, womöglich auch noch auf einem Dell Inspiron zum laufen gebracht hat?
 
@Locutus01: Hast du das Scrolling mit dem Alps Glidepoint hinbekommen? Ich steh vor dem gleichen Problem ...
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Zurück
Oben