NVIDIA 378.13 WTF?

raiding · 9 April 2017

Hy.

Ich habe mir letzte Woche eine GTX 1050 Ti gegönnt. Die Treiber aus den Ports sind zu alt für die Karte (11-Release).

Auf der HP von NVIDIA habe ich dann den "NVIDIA-FreeBSD-x86_64-378.13" Treiber heruntergeladen und installiert und seitdem nur Probleme ..

Als erstes hat mich die Tatsache gestört, dass der Treiber anscheinend die Linux-Binärkomaptiblität vorrausserzt. Also habe ich die Funktion in der Datei nv-freebsd.h abgeschaltet, wie im offiziellen Handbuch empfohlen. Gebracht hat es nix.

Ich hatte für meine vorherige(ältere) Karte, die ich mir von nem Kumpel geliehen hatte, folgendes Howto benutzt, um Xorg zu konfigurieren:
https://forums.freebsd.org/threads/52311/

Hat wunderbar funktioniert. Jetzt natürlich nicht mehr.

Im Handbuch des Treibers steht, man solle nvidia-xconfig benutzen. Hatter gemacht -> Tastatur funktioniert nicht (USB 2.0 mechanische Tastatur) zuvor kein Problem, mit einem Eintrag in /usr/local/etc/X11/xorg.conf.d ..

Habe dann noch ein bisschen mit der .xinitrc gespielt. twm läst er. fluxbox auch, aber fluxbox ist dann nur ein blauer Bildschirm mit gekräuselt schwarzer Schrift ... Tastatur funktioniert wie gesagt bei beiden nicht. Maus schon.

Ich habe den Quelltext mit und ohne Linux kompiliert/installiert. Beide male dasselbe Problem.

Die Standard-/etc/X11/xorg.conf habe ich nur in den Tastaturoptionen leicht abgeändert, ansonsten "vanilla" gelassen.

$ cat /var/log/Xorg.0.log
[ 114.809]
X.Org X Server 1.17.4
Release Date: 2015-10-28
[ 114.809] X Protocol Version 11, Revision 0
[ 114.809] Build Operating System: FreeBSD 11.0-RELEASE-p1 amd64
[ 114.809] Current Operating System: FreeBSD EUCLID 11.0-RELEASE-p1 FreeBSD 11.0-RELEASE-p1 #0: Sun Apr 9 01:29:20 CEST 2017 root@EUCLID:/usr/obj/usr/src/sys/RAIGEN amd64
[ 114.809] Build Date: 09 April 2017 12:17:46AM
[ 114.809]
[ 114.809] Current version of pixman: 0.34.0
[ 114.809] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 114.809] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 114.809] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Apr 9 10:52:28 2017
[ 114.810] (==) Using config file: "/usr/local/etc/X11/xorg.conf"
[ 114.810] (==) ServerLayout "Layout0"
[ 114.810] (**) |-->Screen "Screen0" (0)
[ 114.810] (**) | |-->Monitor "Monitor0"
[ 114.811] (**) | |-->Device "Device0"
[ 114.811] (**) |-->Input Device "Keyboard0"
[ 114.811] (**) |-->Input Device "Mouse0"
[ 114.811] (==) Automatically adding devices
[ 114.811] (==) Automatically enabling devices
[ 114.811] (==) Not automatically adding GPU devices
[ 114.815] (==) FontPath set to:
/usr/local/share/fonts/misc/,
/usr/local/share/fonts/TTF/,
/usr/local/share/fonts/OTF/,
/usr/local/share/fonts/Type1/,
/usr/local/share/fonts/100dpi/,
/usr/local/share/fonts/75dpi/
[ 114.815] (==) ModulePath set to "/usr/local/lib/xorg/modules"
[ 114.815] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 114.815] (WW) Disabling Keyboard0
[ 114.815] (WW) Disabling Mouse0
[ 114.815] (II) Loader magic: 0x81a270
[ 114.816] (II) Module ABI versions:
[ 114.816] X.Org ANSI C Emulation: 0.4
[ 114.816] X.Org Video Driver: 19.0
[ 114.816] X.Org XInput driver : 21.0
[ 114.816] X.Org Server Extension : 9.0
[ 114.816] (--) PCI:*(0:1:0:0) 10de:1c82:10de:1c82 rev 161, Mem @ 0xdb000000/16777216, 0xb0000000/268435456, 0xc0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/65536
[ 114.816] (II) LoadModule: "glx"
[ 114.816] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
[ 114.828] (II) Module glx: vendor="NVIDIA Corporation"
[ 114.828] compiled for 4.0.2, module version = 1.0.0
[ 114.828] Module class: X.Org Server Extension
[ 114.828] (II) NVIDIA GLX Module 378.13 Tue Feb 7 19:33:06 PST 2017
[ 114.828] (II) LoadModule: "nvidia"
[ 114.828] (II) Loading /usr/local/lib/xorg/modules/drivers/nvidia_drv.so
[ 114.829] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 114.829] compiled for 4.0.2, module version = 1.0.0
[ 114.829] Module class: X.Org Video Driver
[ 114.829] (II) NVIDIA dlloader X Driver 378.13 Tue Feb 7 19:12:23 PST 2017
[ 114.829] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 114.829] (--) Using syscons driver with X support (version 16777218.0)
[ 114.829] (--) using VT number 2

[ 114.829] (II) Loading sub module "fb"
[ 114.829] (II) LoadModule: "fb"
[ 114.830] (II) Loading /usr/local/lib/xorg/modules/libfb.so
[ 114.831] (II) Module fb: vendor="X.Org Foundation"
[ 114.831] compiled for 1.17.4, module version = 1.0.0
[ 114.831] ABI class: X.Org ANSI C Emulation, version 0.4
[ 114.831] (II) Loading sub module "wfb"
[ 114.831] (II) LoadModule: "wfb"
[ 114.831] (II) Loading /usr/local/lib/xorg/modules/libwfb.so
[ 114.832] (II) Module wfb: vendor="X.Org Foundation"
[ 114.832] compiled for 1.17.4, module version = 1.0.0
[ 114.832] ABI class: X.Org ANSI C Emulation, version 0.4
[ 114.832] (II) Loading sub module "ramdac"
[ 114.832] (II) LoadModule: "ramdac"
[ 114.832] (II) Module "ramdac" already built-in
[ 114.833] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 114.833] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 114.833] (==) NVIDIA(0): RGB weight 888
[ 114.833] (==) NVIDIA(0): Default visual is TrueColor
[ 114.833] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 114.833] (**) NVIDIA(0): Enabling 2D acceleration
[ 115.717] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[ 115.717] (--) NVIDIA(0): DFP-0 (boot)
[ 115.717] (--) NVIDIA(0): DFP-1
[ 115.717] (--) NVIDIA(0): DFP-2
[ 115.717] (--) NVIDIA(0): DFP-3
[ 115.718] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 1050 Ti (GP107-A) at PCI:1:0:0 (GPU-0)
[ 115.718] (--) NVIDIA(0): Memory: 4194304 kBytes
[ 115.718] (--) NVIDIA(0): VideoBIOS: 86.07.39.00.4e
[ 115.718] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 115.746] (--) NVIDIA(GPU-0): NFC 191M (DFP-0): connected
[ 115.746] (--) NVIDIA(GPU-0): NFC 191M (DFP-0): Internal TMDS
[ 115.746] (--) NVIDIA(GPU-0): NFC 191M (DFP-0): 600.0 MHz maximum pixel clock
[ 115.746] (--) NVIDIA(GPU-0):
[ 115.747] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 115.747] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 115.747] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 115.747] (--) NVIDIA(GPU-0):
[ 115.747] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 115.747] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 115.747] (--) NVIDIA(GPU-0): DFP-2: 1440.0 MHz maximum pixel clock
[ 115.747] (--) NVIDIA(GPU-0):
[ 115.748] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 115.748] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 115.748] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[ 115.748] (--) NVIDIA(GPU-0):
[ 115.750] (==) NVIDIA(0):
[ 115.750] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 115.750] (==) NVIDIA(0): will be used as the requested mode.
[ 115.750] (==) NVIDIA(0):
[ 115.750] (II) NVIDIA(0): Validated MetaModes:
[ 115.751] (II) NVIDIA(0): "DFP-0:nvidia-auto-select"
[ 115.751] (II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
[ 115.756] (--) NVIDIA(0): DPI set to (85, 83); computed from "UseEdidDpi" X config
[ 115.756] (--) NVIDIA(0): option
[ 115.756] (--) Depth 24 pixmap format is 32 bpp
[ 115.757] (II) NVIDIA: Reserving 49152.00 MB of virtual memory for indirect memory
[ 115.757] (II) NVIDIA: access.
[ 115.795] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[ 115.843] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 115.844] (==) NVIDIA(0): Backing store enabled
[ 115.844] (==) NVIDIA(0): Silken mouse enabled
[ 115.844] (**) NVIDIA(0): DPMS enabled
[ 115.845] (II) Loading sub module "dri2"
[ 115.845] (II) LoadModule: "dri2"
[ 115.845] (II) Module "dri2" already built-in
[ 115.845] (II) NVIDIA(0): [DRI2] Setup complete
[ 115.845] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 115.845] (--) RandR disabled
[ 115.846] (II) Initializing extension GLX
[ 115.846] (II) Indirect GLX disabled.
[ 115.908] (II) config/devd: probing input devices...
[ 115.908] (II) config/devd: adding input device (null) (/dev/kbdmux)
[ 115.908] (II) LoadModule: "kbd"
[ 115.908] (II) Loading /usr/local/lib/xorg/modules/input/kbd_drv.so
[ 115.908] (II) Module kbd: vendor="X.Org Foundation"
[ 115.908] compiled for 1.17.4, module version = 1.8.1
[ 115.908] Module class: X.Org XInput Driver
[ 115.908] ABI class: X.Org XInput driver, version 21.0
[ 115.908] (II) Using input driver 'kbd' for 'kbdmux'
[ 115.908] (**) kbdmux: always reports core events
[ 115.908] (**) kbdmux: always reports core events
[ 115.908] (**) Option "Protocol" "standard"
[ 115.908] (**) Option "XkbRules" "base"
[ 115.908] (**) Option "XkbModel" "pc105"
[ 115.908] (**) Option "XkbLayout" "us"
[ 115.908] (**) Option "config_info" "devd:kbdmux"
[ 115.908] (II) XINPUT: Adding extended input device "kbdmux" (type: KEYBOARD, id 6)
[ 116.370] (II) config/devd: kbdmux is enabled, ignoring device ukbd0
[ 116.370] (II) config/devd: kbdmux is enabled, ignoring device ukbd1
[ 116.370] (II) config/devd: kbdmux is enabled, ignoring device ukbd2
[ 116.370] (II) config/devd: adding input device (null) (/dev/sysmouse)
[ 116.370] (II) LoadModule: "mouse"
[ 116.370] (II) Loading /usr/local/lib/xorg/modules/input/mouse_drv.so
[ 116.371] (II) Module mouse: vendor="X.Org Foundation"
[ 116.371] compiled for 1.17.4, module version = 1.9.1
[ 116.371] Module class: X.Org XInput Driver
[ 116.371] ABI class: X.Org XInput driver, version 21.0
[ 116.371] (II) Using input driver 'mouse' for 'sysmouse'
[ 116.371] (**) sysmouse: always reports core events
[ 116.371] (**) Option "Device" "/dev/sysmouse"
[ 116.371] (==) sysmouse: Protocol: "Auto"
[ 116.371] (**) sysmouse: always reports core events
[ 116.371] (==) sysmouse: Emulate3Buttons, Emulate3Timeout: 50
[ 116.372] (**) sysmouse: ZAxisMapping: buttons 4 and 5
[ 116.372] (**) sysmouse: Buttons: 5
[ 116.372] (**) Option "config_info" "devd:sysmouse"
[ 116.372] (II) XINPUT: Adding extended input device "sysmouse" (type: MOUSE, id 7)
[ 116.372] (**) sysmouse: (accel) keeping acceleration scheme 1
[ 116.372] (**) sysmouse: (accel) acceleration profile 0
[ 116.372] (**) sysmouse: (accel) acceleration factor: 2.000
[ 116.372] (**) sysmouse: (accel) acceleration threshold: 4
[ 116.372] (II) sysmouse: SetupAuto: hw.iftype is 4, hw.model is 0
[ 116.372] (II) sysmouse: SetupAuto: protocol is SysMouse
[ 116.372] (II) config/devd: adding input device Game Mouse (/dev/ums0)
[ 116.372] (II) Using input driver 'mouse' for 'Game Mouse'
[ 116.372] (**) Game Mouse: always reports core events
[ 116.372] (**) Option "Device" "/dev/ums0"
[ 116.372] (==) Game Mouse: Protocol: "Auto"
[ 116.372] (**) Game Mouse: always reports core events
[ 116.372] (==) Game Mouse: Emulate3Buttons, Emulate3Timeout: 50
[ 116.372] (**) Game Mouse: ZAxisMapping: buttons 4 and 5
[ 116.372] (**) Game Mouse: Buttons: 5
[ 116.372] (**) Option "config_info" "devd:ums0"
[ 116.372] (II) XINPUT: Adding extended input device "Game Mouse" (type: MOUSE, id 8)
[ 116.372] (**) Game Mouse: (accel) keeping acceleration scheme 1
[ 116.372] (**) Game Mouse: (accel) acceleration profile 0
[ 116.372] (**) Game Mouse: (accel) acceleration factor: 2.000
[ 116.372] (**) Game Mouse: (accel) acceleration threshold: 4
[ 116.372] (II) Game Mouse: SetupAuto: hw.iftype is 5, hw.model is 0
[ 116.372] (II) Game Mouse: SetupAuto: protocol is SysMouse
[ 116.372] (WW) fcntl(24, F_SETOWN): Inappropriate ioctl for device
[ 116.401] (--) NVIDIA(GPU-0): NFC 191M (DFP-0): connected
[ 116.401] (--) NVIDIA(GPU-0): NFC 191M (DFP-0): Internal TMDS
[ 116.401] (--) NVIDIA(GPU-0): NFC 191M (DFP-0): 600.0 MHz maximum pixel clock
[ 116.401] (--) NVIDIA(GPU-0):
[ 116.430] (--) NVIDIA(GPU-0): NFC 191M (DFP-0): connected
[ 116.430] (--) NVIDIA(GPU-0): NFC 191M (DFP-0): Internal TMDS
[ 116.430] (--) NVIDIA(GPU-0): NFC 191M (DFP-0): 600.0 MHz maximum pixel clock
[ 116.430] (--) NVIDIA(GPU-0):
[ 748.124] (II) config/devd: terminating backend...
[ 748.124] (II) UnloadModule: "mouse"
[ 748.124] (II) UnloadModule: "mouse"
[ 748.124] (II) UnloadModule: "kbd"
[ 749.898] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 749.899] (II) Server terminated successfully (0). Closing log file.

xorg.xonf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 378.13 (buildmeister@swio-display-x64-rhel04-19) Tue Feb 7 19:38:03 PST 2017

Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/sysmouse"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
Option "XkbVariant" "nodeadkeys"
Option "XkbOptions" "terminate:ctrl_alt_bksp"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection

Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection

Fusselbär · 9 April 2017

Ich habe hier einen Patch laufen mit dem der nvidia-driver 378.13 bei mir hier prima läuft:

Code:

--- Makefile.orig       2017-04-04 11:31:56.841398000 +0200
+++ Makefile    2017-04-04 11:34:11.465006000 +0200
@@ -10,7 +10,7 @@
# slave ports instead (`x11/nvidia-driver-340' or `x11/nvidia-driver-304').
PORTNAME=      nvidia-driver
-DISTVERSION?=  375.39
+DISTVERSION?=  378.13
# Always try to set PORTREVISION as it can be overridden by the slave ports                                                                                                                                                                                                 
PORTREVISION?= 0                                                                                                                                                                                                                                                            
CATEGORIES=    x11                                                                                                                                                                                                                                                          
@@ -32,6 +32,7 @@                                                                                                                                                                                                                                                            
USE_XORG=      x11 xorg-server xext                                                                                                                                                                                                                                         
USE_GL=                gl                                                                                                                                                                                                                                                   
USE_LDCONFIG=  yes                                                                                                                                                                                                                                                          
+CONFIGURE_ENV+= MISSING=${TRUE} LIBS=${PTHREAD_LIBS}                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                             
# NVIDIA_ROOT is not set in src/Makefile, which results in bogus -I/src                                                                                                                                                                                                     
# passed to compiler and broken build on HEAD since r221320 when option                                                                                                                                                                                                     
@@ -102,7 +103,7 @@                                                                                                                                                                                                                                                          
                                                                                                                                                                                                                                                                             
.if ${PORT_OPTIONS:MLINUX}                                                                                                                                                                                                                                                  
CONFLICTS_INSTALL=     linux[-_]dri-[0-9]* linux-f10-dri-[0-9]*                                                                                                                                                                                                             
-USES+=         linux                                                                                                                                                                                                                                                        
+USES+=         linux:c7                                                                                                                                                                                                                                                     
USE_LINUX=     base:build,run xorglibs                                                                                                                                                                                                                                      
PLIST_SUB+=    LINUX=""                                                                                                                                                                                                                                                     
.else

Da verwende ich aber auch in der /etc/make.conf:

Code:

DEFAULT_VERSIONS+=linux=c7_64

Daher auch die Änderung in linux:c7 im /usr/ports/x11/nvidia-driver/Makefile.

Athaba · 9 April 2017

Fusselbär schrieb:
Code:

DEFAULT_VERSIONS+=linux=c7_64

Daher auch die Änderung in linux:c7 im /usr/ports/x11/nvidia-driver/Makefile.

Ganz leicht OT, aber gibt es c7_64 tatsächlich? Ich lese nur von c6_64in de ports generell (habe gerade drüber gegrepped) und in Mk/bsd.default-versions.mk. Auch lese ich, dass das ohnehin nur ein Alias ist.

Fusselbär · 9 April 2017

Der entsprechende Abschnitt in der /usr/ports/Mk/bsd.default-versions.mk:

Code:

.if ${ARCH} == amd64
# Possible values: c6, c6_64, c7
LINUX_DEFAULT?=         c6_64
.else
# Possible values: c6
LINUX_DEFAULT?=         c6
.endif
.if defined(OVERRIDE_LINUX_BASE_PORT)
LINUX_DEFAULT:=         ${OVERRIDE_LINUX_BASE_PORT}
WARNING+=               "OVERRIDE_LINUX_BASE_PORT is deprecated, please use DEFAULT_VERSIONS+=linux=${OVERRIDE_LINUX_BASE_PORT}."
.endif

So habe ich mir den Eintrag in die /etc/make.conf ausgeguckt.

Fusselbär · 9 April 2017

Der entsprechende Abschnitt in der /usr/ports/Mk/bsd.default-versions.mk war mal:
https://www.bsdforen.de/threads/portmaster-linux_base-c6.33228/#post-288183
So hatte ich mir den Eintrag in die /etc/make.conf ausgeguckt.

Da war die Änderung, die mir bis eben noch entgangen war:
https://svnweb.freebsd.org/ports/head/Mk/bsd.default-versions.mk?r1=431258&r2=431882&pathrev=432693

raiding · 9 April 2017

@Fusselbär Danke für den Hack mit den Ports. Ist auf jeden Fall nützlich. Linux klappt nicht. Sobald ich die Option anwähle merkert er, dass er die linux.mk net finden kann. Aber das ist mir ganz recht. Ich wollte den Treiber eh ohne Linux.

Der blaue Bildschirm besteht weiter -> ich denke, es liegt an meinem DVI-VGA Adapter. Werde mir die Tage mal einen DVI-HDMI-Monitor zum testen besorgen. Ich frage mich nur, warum twm dann 1A angezeigt wird .. naja.

Allerdings kann ich die Tastatur immer noch nicht benutzen. Im VT kein Problem, aber X meckert immer, dass ukb ignoriert wird (s. Oben). Warum ist dies so? Was kann man dagegen tun?

Habe als Treiber keyboard und kbd probiert - ohne Erfolg.

Fusselbär · 9 April 2017

Ich habe bei mir noch ServerFlags in der /etc/X11/xorg.conf:

Code:

Section "ServerFlags"
    Option         "AutoAddDevices" "False"
    Option         "AllowEmptyInput" "Off"
    Option         "BlankTime" "0"
    Option         "StandbyTime" "0"
    Option         "SuspendTime" "0"
    Option         "OffTime" "0"
EndSection

Hier im Spoiler noch mal meine komplette xorg.conf, aber bitte nicht einfach so übernehmen, die will ja jeweils auf das eigene System entsprechend angepasst sein:

Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "Xinerama" "0"
EndSection

Section "Files"
ModulePath "/usr/local/lib/xorg/modules/"
FontPath "/usr/local/share/fonts/100dpi/"
FontPath "/usr/local/share/fonts/75dpi/"
FontPath "/usr/local/share/fonts/Caladea/"
FontPath "/usr/local/share/fonts/Carlito/"
FontPath "/usr/local/share/fonts/Droid/"
FontPath "/usr/local/share/fonts/GentiumBasic/"
FontPath "/usr/local/share/fonts/GentiumPlus/"
FontPath "/usr/local/share/fonts/Liberation/"
FontPath "/usr/local/share/fonts/LinLibertineG/"
FontPath "/usr/local/share/fonts/Myanmar/"
FontPath "/usr/local/share/fonts/OTF/"
FontPath "/usr/local/share/fonts/SourceSansPro/"
FontPath "/usr/local/share/fonts/TTF/"
FontPath "/usr/local/share/fonts/Type1/"
FontPath "/usr/local/share/fonts/adobe-cmaps/"
FontPath "/usr/local/share/fonts/amsfonts/"
FontPath "/usr/local/share/fonts/anonymous-pro/"
FontPath "/usr/local/share/fonts/bitstream-vera/"
FontPath "/usr/local/share/fonts/cantarell/"
FontPath "/usr/local/share/fonts/cmpsfont/"
FontPath "/usr/local/share/fonts/cyberbit-ttfonts/"
FontPath "/usr/local/share/fonts/cyrillic/"
FontPath "/usr/local/share/fonts/dejavu/"
FontPath "/usr/local/share/fonts/encodings/"
FontPath "/usr/local/share/fonts/inconsolata/"
FontPath "/usr/local/share/fonts/kanjistrokeorders/"
FontPath "/usr/local/share/fonts/linuxlibertine/"
FontPath "/usr/local/share/fonts/misc/"
FontPath "/usr/local/share/fonts/proggy_fonts-ttf/"
FontPath "/usr/local/share/fonts/urwfonts-ttf/"
FontPath "/usr/local/share/fonts/webfonts/"
FontPath "/usr/local/share/ghostscript/fonts/"
EndSection

Section "Module"
Load "ddc"
Load "dbe"
Load "extmod"
Load "glx"
Load "freetype"
EndSection

Section "ServerFlags"
Option "AutoAddDevices" "False"
Option "AllowEmptyInput" "Off"
Option "BlankTime" "0"
Option "StandbyTime" "0"
Option "SuspendTime" "0"
Option "OffTime" "0"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
Option "XkbVariant" "nodeadkeys"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/sysmouse"
Option "Buttons" "6"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
EndSection

Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 970"
BusID "PCI:1:0:0"
Screen 0
Option "Coolbits" "4"
Option "TripleBuffer" "1"
Option "RegistryDwords" "EnableBrightnessControl=1"
Option "ForceCompositionPipeline" "1"
Option "ForceFullCompositionPipeline" "1"
Option "MultisampleCompatibility" "1"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "1920x1200_60 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection

Section "Extensions"
Option "Composite" "Enable"
EndSection

Die Option "ForceCompositionPipeline" "1" und "ForceFullCompositionPipeline" "1" ist sehr mögig gegen unschönes Tearing.

Athaba · 9 April 2017

@Fusselbär Okay, also gab's mal. Hatte mich nur gewundert weil auch c6_64 nach dem EOL von 10.3 verschwinden wird.

@raiding: linux.mk sollte aber in den ports unter Mk/Uses/linux.mk sein. Ist dein Port Tree aktuell? Da ist das ganze Verhalten definiert. Und eben auch, dass es kein c7_64 mehr gibt. Übrigens ist das Ändern von Default-Versions kein Hack, oder meintest du das in den Ports überschreiben?

raiding · 9 April 2017

@Fusselbär Habe deine Serverflags mal übernommen. Mit "AutoAddDevices" "False" erkennt er nicht einmal meine Maus ...
Voll verwirrend, warum X mit der alten Karte alles erkennt und die Tastatur funktionier und nun nicht mehr. Ich verstehe die Logik nicht, die GraKa hat mit der Tastatur doch nix zu schaffen ..

@Athaba Die Porta habe ich während der Installation von FreeBSD 11 Release mitinstalliert. "Aktuell" ist das sehr wahrscheinlich nicht unbedingt

Fusselbär · 9 April 2017

Athaba schrieb:
@Fusselbär Okay, also gab's mal. Hatte mich nur gewundert weil auch c6_64 nach dem EOL von 10.3 verschwinden wird.

Dankeschön für den Hinweis, dann ändere ich das mal besser gleich.

Fusselbär · 10 April 2017

Mich wundert oben im Logfile von raiding, dass die Option "CorePointer" und "CoreKeyboard" nicht angenommen wird. Hier mal der Eingabegeräte betreffende Ausschnitt aus meinem Logfile:

Code:

[    35.863] (II) Using input driver 'mouse' for 'Mouse0'
[    35.863] (**) Option "CorePointer"
[    35.863] (**) Mouse0: always reports core events
[    35.863] (**) Option "Protocol" "auto"
[    35.863] (**) Option "Device" "/dev/sysmouse"
[    35.864] (**) Mouse0: Protocol: "auto"
[    35.864] (**) Mouse0: always reports core events
[    35.864] (**) Option "Buttons" "6"
[    35.864] (**) Option "Emulate3Buttons"
[    35.864] (**) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
[    35.864] (**) Option "ZAxisMapping" "4 5"
[    35.864] (**) Mouse0: ZAxisMapping: buttons 4 and 5
[    35.864] (**) Mouse0: Buttons: 10
[    35.864] (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE, id 6)
[    35.864] (**) Mouse0: (accel) keeping acceleration scheme 1
[    35.864] (**) Mouse0: (accel) acceleration profile 0
[    35.864] (**) Mouse0: (accel) acceleration factor: 2.000
[    35.864] (**) Mouse0: (accel) acceleration threshold: 4
[    35.864] (II) Mouse0: SetupAuto: hw.iftype is 4, hw.model is 0
[    35.864] (II) Mouse0: SetupAuto: protocol is SysMouse
[    35.864] (II) Using input driver 'kbd' for 'Keyboard0'
[    35.864] (**) Option "CoreKeyboard"
[    35.864] (**) Keyboard0: always reports core events
[    35.864] (**) Keyboard0: always reports core events
[    35.864] (**) Option "Protocol" "standard"
[    35.864] (**) Option "XkbRules" "base"
[    35.864] (**) Option "XkbModel" "pc105"
[    35.864] (**) Option "XkbLayout" "de"
[    35.864] (**) Option "XkbVariant" "nodeadkeys"
[    35.864] (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD, id 7)
[    35.896] (II) config/devd: probing input devices...
[    35.896] (II) config/devd: adding input device (null) (/dev/kbdmux)
[    35.896] (II) AutoAddDevices is off - not adding device.
[    35.896] (II) config/devd: kbdmux is enabled, ignoring device ukbd0
[    35.896] (II) config/devd: adding input device (null) (/dev/sysmouse)
[    35.896] (II) AutoAddDevices is off - not adding device.
[    35.896] (II) config/devd: device /dev/ums0 already opened

Auch das:

Code:

[ 116.372] (WW) fcntl(24, F_SETOWN): Inappropriate ioctl for device

aus raiding seinem Logfile sieht irgendwie nicht gut aus.

Eine andere Idee hätte ich da noch, es einfach mal im Hau-Ruck Verfahren mit einem restart des USB zu versuchen, also mit usbconfig herausfinden wo genau die USB Eingabegeräte dranhängen und diese Ports dann nach dem Start vom X-Server mal neuzustarten, über einen Autostart (xinitrc, oder was sonst genutzt wird, um den jeweiligen Desktop zu starten), etwa so:

Code:

sudo usbconfig -u 1 -a 2 power_off && sudo usbconfig -u 1 -a 2 power_on

Wenn die fragliche Gerätschaft mit usbconfig ausgeguckt etwa an ugen1.2 hängen würde.
Da dafür root ihre Rechte benötigt werden, müsste man sich dann vorher etwa in die sudoers so was reinbasteln:

Code:

%wheel ALL=NOPASSWD: /usr/sbin/usbconfig  -u 1 -a 2 power_off
%wheel ALL=NOPASSWD: /usr/sbin/usbconfig -u 1 -a 2 power_on

Optimal ist das natürlich nicht, aber so als Frickelwürgdrumherum mal zum ausprobieren, ob dann die Eingabegeräte zur Funktion zu überreden sind, könnte man es ja mal versuchen.

raiding · 10 April 2017

Guten Abend!

Habe grad nochmal probiert, Xorg ohne den Adapter, also mit DVI-D- und Displayportmonitor zu starten. Ergebnis: Dassselbe!
twm startet mit Bombenauflösung, fluxbox, wmaker etc. entweder gar nicht oder mit einem blau-/schwarz-Kontrast (fluxbox). Also der Adapter scheidet aus dem Kreis der Verdächtigen aus.

@Fusselbär Ich habe als root folgendes Kommando ausprobiert:

# usbconfig -u 1 -a 2 dump_info
No device match or lack of permissions.

Dieselbe Ausgabe erhalte ich, wenn ich dein Kommando eingebe.

Fusselbär · 10 April 2017

Einfach nur usbconfig eingeben und ab dafür, ohne Schalter, dann wird die Belegung angezeigt:

Code:

usbconfig

Die angezeigten Daten können dann zur Adressierung des gewünschten Ports verwendet werden.

raiding · 10 April 2017

Ok. Habe die Kommandofolge in die .xinitrc eingetragen. Als Vor- und Hintergrundprozess. Beide Male beendet X, Treiber für Maus und Tastatur werden aber geladen.

[ 690.589]
X.Org X Server 1.17.4
Release Date: 2015-10-28
[ 690.589] X Protocol Version 11, Revision 0
[ 690.589] Build Operating System: FreeBSD 11.0-RELEASE-p1 amd64
[ 690.589] Current Operating System: FreeBSD EUCLID 11.0-RELEASE-p1 FreeBSD 11.0-RELEASE-p1 #0: Mon Apr 10 17:46:11 CEST 2017 root@EUCLID:/usr/obj/usr/src/sys/RAIGEN amd64
[ 690.590] Build Date: 09 April 2017 12:17:46AM
[ 690.590]
[ 690.590] Current version of pixman: 0.34.0
[ 690.590] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 690.590] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 690.590] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 10 18:27:28 2017
[ 690.590] (==) Using config directory: "/usr/local/etc/X11/xorg.conf.d"
[ 690.590] (==) Using system config directory "/usr/local/share/X11/xorg.conf.d"
[ 690.590] (==) No Layout section. Using the first Screen section.
[ 690.590] (==) No screen section available. Using defaults.
[ 690.590] (**) |-->Screen "Default Screen Section" (0)
[ 690.590] (**) | |-->Monitor "<default monitor>"
[ 690.590] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 690.590] (**) | |-->Device "NVIDIA Card"
[ 690.590] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 690.590] (==) Automatically adding devices
[ 690.590] (==) Automatically enabling devices
[ 690.590] (==) Not automatically adding GPU devices
[ 690.590] (==) FontPath set to:
/usr/local/share/fonts/misc/,
/usr/local/share/fonts/TTF/,
/usr/local/share/fonts/OTF/,
/usr/local/share/fonts/Type1/,
/usr/local/share/fonts/100dpi/,
/usr/local/share/fonts/75dpi/
[ 690.590] (==) ModulePath set to "/usr/local/lib/xorg/modules"
[ 690.590] (II) The server relies on devd to provide the list of input devices.
If no devices become available, reconfigure devd or disable AutoAddDevices.
[ 690.590] (II) Loader magic: 0x81a270
[ 690.590] (II) Module ABI versions:
[ 690.590] X.Org ANSI C Emulation: 0.4
[ 690.590] X.Org Video Driver: 19.0
[ 690.590] X.Org XInput driver : 21.0
[ 690.590] X.Org Server Extension : 9.0
[ 690.590] (--) PCI:*(0:1:0:0) 10de:1c82:10de:1c82 rev 161, Mem @ 0xdb000000/16777216, 0xb0000000/268435456, 0xc0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/65536
[ 690.590] (II) LoadModule: "glx"
[ 690.590] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
[ 690.593] (II) Module glx: vendor="NVIDIA Corporation"
[ 690.593] compiled for 4.0.2, module version = 1.0.0
[ 690.593] Module class: X.Org Server Extension
[ 690.593] (II) NVIDIA GLX Module 378.13 Tue Feb 7 19:33:06 PST 2017
[ 690.593] (II) LoadModule: "nvidia"
[ 690.593] (II) Loading /usr/local/lib/xorg/modules/drivers/nvidia_drv.so
[ 690.594] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 690.594] compiled for 4.0.2, module version = 1.0.0
[ 690.594] Module class: X.Org Video Driver
[ 690.594] (II) NVIDIA dlloader X Driver 378.13 Tue Feb 7 19:12:23 PST 2017
[ 690.594] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 690.594] (--) Using syscons driver with X support (version 16777218.0)
[ 690.594] (--) using VT number 3

[ 690.594] (II) Loading sub module "fb"
[ 690.594] (II) LoadModule: "fb"
[ 690.594] (II) Loading /usr/local/lib/xorg/modules/libfb.so
[ 690.594] (II) Module fb: vendor="X.Org Foundation"
[ 690.594] compiled for 1.17.4, module version = 1.0.0
[ 690.594] ABI class: X.Org ANSI C Emulation, version 0.4
[ 690.594] (II) Loading sub module "wfb"
[ 690.594] (II) LoadModule: "wfb"
[ 690.594] (II) Loading /usr/local/lib/xorg/modules/libwfb.so
[ 690.594] (II) Module wfb: vendor="X.Org Foundation"
[ 690.594] compiled for 1.17.4, module version = 1.0.0
[ 690.594] ABI class: X.Org ANSI C Emulation, version 0.4
[ 690.594] (II) Loading sub module "ramdac"
[ 690.594] (II) LoadModule: "ramdac"
[ 690.594] (II) Module "ramdac" already built-in
[ 690.594] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 690.594] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 690.594] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 690.595] (==) NVIDIA(0): RGB weight 888
[ 690.595] (==) NVIDIA(0): Default visual is TrueColor
[ 690.595] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 690.595] (**) NVIDIA(0): Enabling 2D acceleration
[ 691.237] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[ 691.237] (--) NVIDIA(0): DFP-0
[ 691.237] (--) NVIDIA(0): DFP-1
[ 691.237] (--) NVIDIA(0): DFP-2 (boot)
[ 691.237] (--) NVIDIA(0): DFP-3
[ 691.238] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 1050 Ti (GP107-A) at PCI:1:0:0 (GPU-0)
[ 691.238] (--) NVIDIA(0): Memory: 4194304 kBytes
[ 691.238] (--) NVIDIA(0): VideoBIOS: 86.07.39.00.4e
[ 691.238] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 691.240] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 691.240] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 691.240] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 691.240] (--) NVIDIA(GPU-0):
[ 691.240] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 691.240] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 691.240] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 691.240] (--) NVIDIA(GPU-0):
[ 691.241] (--) NVIDIA(GPU-0): LG Electronics 23MB35 (DFP-2): connected
[ 691.241] (--) NVIDIA(GPU-0): LG Electronics 23MB35 (DFP-2): Internal DisplayPort
[ 691.241] (--) NVIDIA(GPU-0): LG Electronics 23MB35 (DFP-2): 1440.0 MHz maximum pixel clock
[ 691.241] (--) NVIDIA(GPU-0):
[ 691.242] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 691.242] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 691.242] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[ 691.242] (--) NVIDIA(GPU-0):
[ 691.244] (==) NVIDIA(0):
[ 691.244] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 691.244] (==) NVIDIA(0): will be used as the requested mode.
[ 691.244] (==) NVIDIA(0):
[ 691.245] (II) NVIDIA(0): Validated MetaModes:
[ 691.245] (II) NVIDIA(0): "DFP-2:nvidia-auto-select"
[ 691.245] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 691.252] (--) NVIDIA(0): DPI set to (95, 94); computed from "UseEdidDpi" X config
[ 691.252] (--) NVIDIA(0): option
[ 691.252] (--) Depth 24 pixmap format is 32 bpp
[ 691.253] (II) NVIDIA: Reserving 49152.00 MB of virtual memory for indirect memory
[ 691.253] (II) NVIDIA: access.
[ 691.290] (II) NVIDIA(0): Setting mode "DFP-2:nvidia-auto-select"
[ 691.386] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 691.386] (==) NVIDIA(0): Backing store enabled
[ 691.386] (==) NVIDIA(0): Silken mouse enabled
[ 691.386] (==) NVIDIA(0): DPMS enabled
[ 691.386] (II) Loading sub module "dri2"
[ 691.386] (II) LoadModule: "dri2"
[ 691.386] (II) Module "dri2" already built-in
[ 691.386] (II) NVIDIA(0): [DRI2] Setup complete
[ 691.386] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 691.387] (--) RandR disabled
[ 691.387] (II) Initializing extension GLX
[ 691.387] (II) Indirect GLX disabled.
[ 691.432] (II) config/devd: probing input devices...
[ 691.432] (II) config/devd: adding input device (null) (/dev/kbdmux)
[ 691.432] (**) kbdmux: Applying InputClass "KeyboardDefaults"
[ 691.432] (II) LoadModule: "kbd"
[ 691.432] (II) Loading /usr/local/lib/xorg/modules/input/kbd_drv.so
[ 691.432] (II) Module kbd: vendor="X.Org Foundation"
[ 691.432] compiled for 1.17.4, module version = 1.8.1
[ 691.432] Module class: X.Org XInput Driver
[ 691.432] ABI class: X.Org XInput driver, version 21.0
[ 691.432] (II) Using input driver 'kbd' for 'kbdmux'
[ 691.432] (**) kbdmux: always reports core events
[ 691.432] (**) kbdmux: always reports core events
[ 691.432] (**) Option "Protocol" "standard"
[ 691.432] (**) Option "XkbRules" "xorg"
[ 691.432] (**) Option "XkbModel" "pc105"
[ 691.432] (**) Option "XkbLayout" "de"
[ 691.432] (**) Option "XkbVariant" "nodeadkeys"
[ 691.432] (**) Option "XkbOptions" "terminate:ctrl_alt_bksp"
[ 691.432] (**) Option "config_info" "devd:kbdmux"
[ 691.432] (II) XINPUT: Adding extended input device "kbdmux" (type: KEYBOARD, id 6)
[ 691.908] (II) config/devd: kbdmux is enabled, ignoring device ukbd0
[ 691.908] (II) config/devd: kbdmux is enabled, ignoring device ukbd1
[ 691.908] (II) config/devd: kbdmux is enabled, ignoring device ukbd2
[ 691.908] (II) config/devd: adding input device (null) (/dev/sysmouse)
[ 691.908] (II) LoadModule: "mouse"
[ 691.908] (II) Loading /usr/local/lib/xorg/modules/input/mouse_drv.so
[ 691.908] (II) Module mouse: vendor="X.Org Foundation"
[ 691.908] compiled for 1.17.4, module version = 1.9.1
[ 691.908] Module class: X.Org XInput Driver
[ 691.908] ABI class: X.Org XInput driver, version 21.0
[ 691.908] (II) Using input driver 'mouse' for 'sysmouse'
[ 691.908] (**) sysmouse: always reports core events
[ 691.908] (**) Option "Device" "/dev/sysmouse"
[ 691.908] (==) sysmouse: Protocol: "Auto"
[ 691.908] (**) sysmouse: always reports core events
[ 691.908] (==) sysmouse: Emulate3Buttons, Emulate3Timeout: 50
[ 691.908] (**) sysmouse: ZAxisMapping: buttons 4 and 5
[ 691.908] (**) sysmouse: Buttons: 5
[ 691.909] (**) Option "config_info" "devd:sysmouse"
[ 691.909] (II) XINPUT: Adding extended input device "sysmouse" (type: MOUSE, id 7)
[ 691.909] (**) sysmouse: (accel) keeping acceleration scheme 1
[ 691.909] (**) sysmouse: (accel) acceleration profile 0
[ 691.909] (**) sysmouse: (accel) acceleration factor: 2.000
[ 691.909] (**) sysmouse: (accel) acceleration threshold: 4
[ 691.909] (II) sysmouse: SetupAuto: hw.iftype is 4, hw.model is 0
[ 691.909] (II) sysmouse: SetupAuto: protocol is SysMouse
[ 691.909] (II) config/devd: adding input device Game Mouse (/dev/ums0)
[ 691.909] (II) Using input driver 'mouse' for 'Game Mouse'
[ 691.909] (**) Game Mouse: always reports core events
[ 691.909] (**) Option "Device" "/dev/ums0"
[ 691.909] (==) Game Mouse: Protocol: "Auto"
[ 691.909] (**) Game Mouse: always reports core events
[ 691.909] (==) Game Mouse: Emulate3Buttons, Emulate3Timeout: 50
[ 691.909] (**) Game Mouse: ZAxisMapping: buttons 4 and 5
[ 691.909] (**) Game Mouse: Buttons: 5
[ 691.909] (**) Option "config_info" "devd:ums0"
[ 691.909] (II) XINPUT: Adding extended input device "Game Mouse" (type: MOUSE, id 8)
[ 691.909] (**) Game Mouse: (accel) keeping acceleration scheme 1
[ 691.909] (**) Game Mouse: (accel) acceleration profile 0
[ 691.909] (**) Game Mouse: (accel) acceleration factor: 2.000
[ 691.909] (**) Game Mouse: (accel) acceleration threshold: 4
[ 691.909] (II) Game Mouse: SetupAuto: hw.iftype is 5, hw.model is 0
[ 691.909] (II) Game Mouse: SetupAuto: protocol is SysMouse
[ 691.909] (WW) fcntl(24, F_SETOWN): Inappropriate ioctl for device
[ 691.910] (--) NVIDIA(GPU-0): LG Electronics 23MB35 (DFP-2): connected
[ 691.910] (--) NVIDIA(GPU-0): LG Electronics 23MB35 (DFP-2): Internal DisplayPort
[ 691.910] (--) NVIDIA(GPU-0): LG Electronics 23MB35 (DFP-2): 1440.0 MHz maximum pixel clock
[ 691.910] (--) NVIDIA(GPU-0):
[ 692.462] (II) config/devd: kbdmux is enabled, ignoring device ukbd0
[ 692.515] (II) config/devd: kbdmux is enabled, ignoring device ukbd1
[ 692.516] (II) config/devd: terminating backend...
[ 692.516] (II) UnloadModule: "mouse"
[ 692.516] (II) UnloadModule: "mouse"
[ 692.516] (II) UnloadModule: "kbd"
[ 693.182] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 693.183] (II) Server terminated successfully (0). Closing log file.

Zum Schluss sollte ich vllt noch anmerken, dass ich nicht mehr die originale /etc/X11/xorg.conf benutze, die nvidia-xconfig mir erstellt hat, sondern selbst ich selbst 2 Eintragungen in /usr/local/etc/X11/xorg.conf.d/ vorgenommen habe (Bildschirm und Tastatur).

Fusselbär · 10 April 2017

Hast Du vielleicht mal irgend eine andere USB Maus, die Du anstatt der Game Mouse probeweise nutzen könntest? Wegen dieser fcntl Warnung direkt nach der Mauserkennung.

Den Versuchsaufbau mit dem USB restart aber vorher wieder raus nehmen.

raiding · 10 April 2017

Jo, ne USB-Funkmaus. Ebenfalls keine Tastatureingabe möglich.

Hab nun auch den X ohne angeschlossene Maus gestartet, also nur Tastatur. Nüscht :/

Fusselbär · 10 April 2017

Was ist mit der fcntl Warnung? Gab es die dann immer noch im Logfile? Also diese Warnung:

Code:

(WW) fcntl(24, F_SETOWN): Inappropriate ioctl for device

raiding · 10 April 2017

Jup:

(WW) fcntl(31, F_SETOWN): Inappropriate ioctl for device

Fusselbär · 11 April 2017

Es gibt ganz frisch eine neue Beta Version 381.09:
https://devtalk.nvidia.com/default/topic/1002788
Habe aber nur eben ausprobiert, ob die neue neue Beta Version 381.09 nach anpassen der DISTVERSION baut, das tat sie einwandfrei bei mir hier. Aber installiert habe ich sie nicht. Gerade alles schön auf Version 378.13, nvidia-settings, nvidia-xconfig und den nvidia-driver. Und das läuft bei mir hier auch bei grafisch anspruchsvollen Anwendungen fein, wie etwa Zero-K mit der spring Engine oder 0ad.

Falls sich das Problem nicht mit einer neueren Version beheben lässt und auch sonst die Möglichkeiten ausgeschöpft sind, dann bietet sich auch noch die Möglichkeit an, sich an Nvidia zu wenden, dafür gibt es ein mit installiertes nvidia-bug-reports.sh Shellscript unter:

Code:

/usr/local/bin/nvidia-bug-report.sh

Hier gibt es was dazu zu lesen:
https://devtalk.nvidia.com/default/topic/522835/linux/if-you-have-a-problem-please-read-this-first/
und dort ist der FreeBSD Bereich im Nvidia Forum:
https://devtalk.nvidia.com/default/board/97/freebsd/

raiding · 12 April 2017

Ok. Werde ich probieren. Vielen Dank auf jeden Fall für die Hilfe @Fusselbär !!

raiding · 12 April 2017

Guten Abend.

Kurze Rückmeldung: Das Installieren hat problemlos geklappt. Die Fehler bestehen allerdings weiterhin (/etc/X11/xorg.conf via nvidia-xconfig erstellt):

[ 90176.907]
X.Org X Server 1.17.4
Release Date: 2015-10-28
[ 90176.907] X Protocol Version 11, Revision 0
[ 90176.907] Build Operating System: FreeBSD 11.0-RELEASE-p1 amd64
[ 90176.907] Current Operating System: FreeBSD EUCLID 11.0-RELEASE-p1 FreeBSD 11.0-RELEASE-p1 #0: Mon Apr 10 17:46:11 CEST 2017 root@EUCLID:/usr/obj/usr/src/sys/RAIGEN amd64
[ 90176.907] Build Date: 09 April 2017 12:17:46AM
[ 90176.907]
[ 90176.907] Current version of pixman: 0.34.0
[ 90176.907] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 90176.907] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 90176.907] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 12 17:56:42 2017
[ 90176.907] (==) Using config file: "/etc/X11/xorg.conf"
[ 90176.908] (==) Using system config directory "/usr/local/share/X11/xorg.conf.d"
[ 90176.908] (==) ServerLayout "Layout0"
[ 90176.908] (**) |-->Screen "Screen0" (0)
[ 90176.908] (**) | |-->Monitor "Monitor0"
[ 90176.908] (**) | |-->Device "Device0"
[ 90176.908] (**) |-->Input Device "Keyboard0"
[ 90176.908] (**) |-->Input Device "Mouse0"
[ 90176.908] (==) Automatically adding devices
[ 90176.908] (==) Automatically enabling devices
[ 90176.908] (==) Not automatically adding GPU devices
[ 90176.908] (==) FontPath set to:
/usr/local/share/fonts/misc/,
/usr/local/share/fonts/TTF/,
/usr/local/share/fonts/OTF/,
/usr/local/share/fonts/Type1/,
/usr/local/share/fonts/100dpi/,
/usr/local/share/fonts/75dpi/
[ 90176.908] (==) ModulePath set to "/usr/local/lib/xorg/modules"
[ 90176.908] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 90176.908] (WW) Disabling Keyboard0
[ 90176.908] (WW) Disabling Mouse0
[ 90176.908] (II) Loader magic: 0x81a270
[ 90176.908] (II) Module ABI versions:
[ 90176.908] X.Org ANSI C Emulation: 0.4
[ 90176.908] X.Org Video Driver: 19.0
[ 90176.908] X.Org XInput driver : 21.0
[ 90176.908] X.Org Server Extension : 9.0
[ 90176.908] (--) PCI:*(0:1:0:0) 10de:1c82:10de:1c82 rev 161, Mem @ 0xdb000000/16777216, 0xb0000000/268435456, 0xc0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/65536
[ 90176.908] (II) LoadModule: "glx"
[ 90176.908] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
[ 90176.911] (II) Module glx: vendor="NVIDIA Corporation"
[ 90176.911] compiled for 4.0.2, module version = 1.0.0
[ 90176.911] Module class: X.Org Server Extension
[ 90176.911] (II) NVIDIA GLX Module 381.09 Thu Mar 30 19:07:26 PDT 2017
[ 90176.911] (II) LoadModule: "nvidia"
[ 90176.911] (II) Loading /usr/local/lib/xorg/modules/drivers/nvidia_drv.so
[ 90176.911] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 90176.911] compiled for 4.0.2, module version = 1.0.0
[ 90176.911] Module class: X.Org Video Driver
[ 90176.911] (II) NVIDIA dlloader X Driver 381.09 Thu Mar 30 18:44:18 PDT 2017
[ 90176.911] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 90176.911] (--) Using syscons driver with X support (version 16777218.0)
[ 90176.911] (--) using VT number 3

[ 90176.911] (II) Loading sub module "fb"
[ 90176.911] (II) LoadModule: "fb"
[ 90176.911] (II) Loading /usr/local/lib/xorg/modules/libfb.so
[ 90176.911] (II) Module fb: vendor="X.Org Foundation"
[ 90176.911] compiled for 1.17.4, module version = 1.0.0
[ 90176.911] ABI class: X.Org ANSI C Emulation, version 0.4
[ 90176.911] (II) Loading sub module "wfb"
[ 90176.911] (II) LoadModule: "wfb"
[ 90176.911] (II) Loading /usr/local/lib/xorg/modules/libwfb.so
[ 90176.911] (II) Module wfb: vendor="X.Org Foundation"
[ 90176.911] compiled for 1.17.4, module version = 1.0.0
[ 90176.911] ABI class: X.Org ANSI C Emulation, version 0.4
[ 90176.912] (II) Loading sub module "ramdac"
[ 90176.912] (II) LoadModule: "ramdac"
[ 90176.912] (II) Module "ramdac" already built-in
[ 90176.912] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 90176.912] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 90176.912] (==) NVIDIA(0): RGB weight 888
[ 90176.912] (==) NVIDIA(0): Default visual is TrueColor
[ 90176.912] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 90176.912] (**) NVIDIA(0): Enabling 2D acceleration
[ 90177.523] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[ 90177.523] (--) NVIDIA(0): DFP-0
[ 90177.523] (--) NVIDIA(0): DFP-1
[ 90177.523] (--) NVIDIA(0): DFP-2 (boot)
[ 90177.523] (--) NVIDIA(0): DFP-3
[ 90177.524] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 1050 Ti (GP107-A) at PCI:1:0:0 (GPU-0)
[ 90177.524] (--) NVIDIA(0): Memory: 4194304 kBytes
[ 90177.524] (--) NVIDIA(0): VideoBIOS: 86.07.39.00.4e
[ 90177.524] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 90177.525] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 90177.525] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 90177.525] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 90177.525] (--) NVIDIA(GPU-0):
[ 90177.526] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 90177.526] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 90177.526] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 90177.526] (--) NVIDIA(GPU-0):
[ 90177.526] (--) NVIDIA(GPU-0): LG Electronics 23MB35 (DFP-2): connected
[ 90177.526] (--) NVIDIA(GPU-0): LG Electronics 23MB35 (DFP-2): Internal DisplayPort
[ 90177.526] (--) NVIDIA(GPU-0): LG Electronics 23MB35 (DFP-2): 1440.0 MHz maximum pixel clock
[ 90177.526] (--) NVIDIA(GPU-0):
[ 90177.528] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 90177.528] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 90177.528] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[ 90177.528] (--) NVIDIA(GPU-0):
[ 90177.530] (==) NVIDIA(0):
[ 90177.530] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 90177.530] (==) NVIDIA(0): will be used as the requested mode.
[ 90177.530] (==) NVIDIA(0):
[ 90177.531] (II) NVIDIA(0): Validated MetaModes:
[ 90177.531] (II) NVIDIA(0): "DFP-2:nvidia-auto-select"
[ 90177.531] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 90177.538] (--) NVIDIA(0): DPI set to (95, 94); computed from "UseEdidDpi" X config
[ 90177.538] (--) NVIDIA(0): option
[ 90177.538] (--) Depth 24 pixmap format is 32 bpp
[ 90177.539] (II) NVIDIA: Reserving 49152.00 MB of virtual memory for indirect memory
[ 90177.539] (II) NVIDIA: access.
[ 90177.559] (II) NVIDIA(0): Setting mode "DFP-2:nvidia-auto-select"
[ 90177.655] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 90177.655] (==) NVIDIA(0): Backing store enabled
[ 90177.655] (==) NVIDIA(0): Silken mouse enabled
[ 90177.655] (**) NVIDIA(0): DPMS enabled
[ 90177.655] (II) Loading sub module "dri2"
[ 90177.655] (II) LoadModule: "dri2"
[ 90177.655] (II) Module "dri2" already built-in
[ 90177.655] (II) NVIDIA(0): [DRI2] Setup complete
[ 90177.655] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 90177.655] (--) RandR disabled
[ 90177.655] (II) Initializing extension GLX
[ 90177.655] (II) Indirect GLX disabled.
[ 90177.701] (II) config/devd: probing input devices...
[ 90177.701] (II) config/devd: adding input device (null) (/dev/kbdmux)
[ 90177.701] (II) LoadModule: "kbd"
[ 90177.701] (II) Loading /usr/local/lib/xorg/modules/input/kbd_drv.so
[ 90177.701] (II) Module kbd: vendor="X.Org Foundation"
[ 90177.701] compiled for 1.17.4, module version = 1.8.1
[ 90177.701] Module class: X.Org XInput Driver
[ 90177.701] ABI class: X.Org XInput driver, version 21.0
[ 90177.701] (II) Using input driver 'kbd' for 'kbdmux'
[ 90177.701] (**) kbdmux: always reports core events
[ 90177.701] (**) kbdmux: always reports core events
[ 90177.701] (**) Option "Protocol" "standard"
[ 90177.701] (**) Option "XkbRules" "base"
[ 90177.701] (**) Option "XkbModel" "pc105"
[ 90177.701] (**) Option "XkbLayout" "us"
[ 90177.701] (**) Option "config_info" "devd:kbdmux"
[ 90177.701] (II) XINPUT: Adding extended input device "kbdmux" (type: KEYBOARD, id 6)
[ 90178.162] (II) config/devd: kbdmux is enabled, ignoring device ukbd0
[ 90178.162] (II) config/devd: kbdmux is enabled, ignoring device ukbd1
[ 90178.162] (II) config/devd: kbdmux is enabled, ignoring device ukbd2
[ 90178.162] (II) config/devd: adding input device (null) (/dev/sysmouse)
[ 90178.162] (II) LoadModule: "mouse"
[ 90178.162] (II) Loading /usr/local/lib/xorg/modules/input/mouse_drv.so
[ 90178.162] (II) Module mouse: vendor="X.Org Foundation"
[ 90178.162] compiled for 1.17.4, module version = 1.9.1
[ 90178.162] Module class: X.Org XInput Driver
[ 90178.162] ABI class: X.Org XInput driver, version 21.0
[ 90178.162] (II) Using input driver 'mouse' for 'sysmouse'
[ 90178.162] (**) sysmouse: always reports core events
[ 90178.162] (**) Option "Device" "/dev/sysmouse"
[ 90178.162] (==) sysmouse: Protocol: "Auto"
[ 90178.162] (**) sysmouse: always reports core events
[ 90178.162] (==) sysmouse: Emulate3Buttons, Emulate3Timeout: 50
[ 90178.162] (**) sysmouse: ZAxisMapping: buttons 4 and 5
[ 90178.162] (**) sysmouse: Buttons: 5
[ 90178.162] (**) Option "config_info" "devd:sysmouse"
[ 90178.162] (II) XINPUT: Adding extended input device "sysmouse" (type: MOUSE, id 7)
[ 90178.163] (**) sysmouse: (accel) keeping acceleration scheme 1
[ 90178.163] (**) sysmouse: (accel) acceleration profile 0
[ 90178.163] (**) sysmouse: (accel) acceleration factor: 2.000
[ 90178.163] (**) sysmouse: (accel) acceleration threshold: 4
[ 90178.163] (II) sysmouse: SetupAuto: hw.iftype is 4, hw.model is 0
[ 90178.163] (II) sysmouse: SetupAuto: protocol is SysMouse
[ 90178.163] (II) config/devd: adding input device USB Device (/dev/ums0)
[ 90178.163] (II) Using input driver 'mouse' for 'USB Device'
[ 90178.163] (**) USB Device: always reports core events
[ 90178.163] (**) Option "Device" "/dev/ums0"
[ 90178.163] (==) USB Device: Protocol: "Auto"
[ 90178.163] (**) USB Device: always reports core events
[ 90178.163] (==) USB Device: Emulate3Buttons, Emulate3Timeout: 50
[ 90178.163] (**) USB Device: ZAxisMapping: buttons 4 and 5
[ 90178.163] (**) USB Device: Buttons: 5
[ 90178.163] (**) Option "config_info" "devd:ums0"
[ 90178.163] (II) XINPUT: Adding extended input device "USB Device" (type: MOUSE, id 8)
[ 90178.163] (**) USB Device: (accel) keeping acceleration scheme 1
[ 90178.163] (**) USB Device: (accel) acceleration profile 0
[ 90178.163] (**) USB Device: (accel) acceleration factor: 2.000
[ 90178.163] (**) USB Device: (accel) acceleration threshold: 4
[ 90178.163] (II) USB Device: SetupAuto: hw.iftype is 5, hw.model is 0
[ 90178.163] (II) USB Device: SetupAuto: protocol is SysMouse
[ 90178.163] (WW) fcntl(24, F_SETOWN): Inappropriate ioctl for device
[ 90178.163] (--) NVIDIA(GPU-0): LG Electronics 23MB35 (DFP-2): connected
[ 90178.163] (--) NVIDIA(GPU-0): LG Electronics 23MB35 (DFP-2): Internal DisplayPort
[ 90178.163] (--) NVIDIA(GPU-0): LG Electronics 23MB35 (DFP-2): 1440.0 MHz maximum pixel clock
[ 90178.164] (--) NVIDIA(GPU-0):
[ 90196.792] (II) config/devd: terminating backend...
[ 90196.792] (II) UnloadModule: "mouse"
[ 90196.792] (II) UnloadModule: "mouse"
[ 90196.792] (II) UnloadModule: "kbd"
[ 90201.474] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 90201.475] (II) Server terminated successfully (0). Closing log file.

Ein paar Zeilen sind neu:

[ 90176.908] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 90176.908] (WW) Disabling Keyboard0
[ 90176.908] (WW) Disabling Mouse0

Werde mich, falls niemand hier einen Rat weiß mal tatsächlich an NVIDIA wenden ...

Grüße

h^2 · 12 April 2017

Anmerkung der.moderation: Bitte die ausgaben in code-blöcke!

NVIDIA 378.13 WTF?

Well-Known Member

Makefile Voyeur

Libellenliebhaber

Makefile Voyeur

Makefile Voyeur

Well-Known Member

Makefile Voyeur

Libellenliebhaber

Well-Known Member

Makefile Voyeur

Makefile Voyeur

Well-Known Member

Makefile Voyeur

Well-Known Member

Makefile Voyeur

Well-Known Member

Makefile Voyeur

Well-Known Member

Makefile Voyeur

Well-Known Member

Well-Known Member

hat ne Keule +1

Wir schützen deine Privatsphäre