d4mi4n
volksoperator on duty
sodele ich hab nochmal nen neuen versuch gestartet zwecks obsd
hier meine karte
dann ein image erstellt
# dd if=/dev/zero of=disk.image bs=512 count=500736
virtuelle disk erstellt
vnconfig -c svnd0 disk.image
nach den angaben vom wrap (978/16/32) das disklabel verändert und a angelegt
danach das neue dateisystem angelegt
# newfs -S 512 -u 32 -z 64 -q /dev/rsvnd0a
partitionstabelle geupt
# fdisk -c 978 -h 16 -s 32 -f /usr/mdec/mbr -e svnd0
fdisk: 1> reinit
fdisk: 1> update
fdisk: 1> print
fdisk: 1> write
fdisk: 1> quit
das ganze gemountet
# mount /dev/svnd0a /mnt/wrap
# cp /usr/mdec/boot /mnt/wrap/
dann noch bsd, bsd.rd, base36.tgz, comp36.tgz und misc36.tgz draufentpackt
den bootloader rüberkopiert
# /usr/mdec/installboot /mnt/wrap/boot /usr/mdec/biosboot svnd0
das ganze geunmountet
# umount /mnt/wrap
# vnconfig -u svnd0
und dann das image auf die karte kopiert
# dd if=disk.image of=/dev/rsd1c bs=512
sodele, jetzt hab ich allerdings das problem das beim booten des wrap angezeigt wird das / 0 gross ist....
im tutorial steht das man schaun soll welche geometriedaten der wrap ausspuckt und diese soll man dann nehmen, das habich getan aber irgendwie
hier meine karte
Code:
# /dev/rsd0c:
type: SCSI
disk: SCSI disk
label: wrap
flags:
bytes/sector: 512
sectors/track: 32
tracks/cylinder: 64
sectors/cylinder: 2048
cylinders: 978
total sectors: 500736
rpm: 3600
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0 # microseconds
track-to-track seek: 0 # microseconds
drivedata: 0
16 partitions:
# size offset fstype [fsize bsize cpg]
a: 499680 32 4.2BSD 2048 16384 16 # (Cyl. 0*- 243)
c: 500736 0 unused 0 0 # (Cyl. 0 - 244*)
dann ein image erstellt
# dd if=/dev/zero of=disk.image bs=512 count=500736
virtuelle disk erstellt
vnconfig -c svnd0 disk.image
nach den angaben vom wrap (978/16/32) das disklabel verändert und a angelegt
danach das neue dateisystem angelegt
# newfs -S 512 -u 32 -z 64 -q /dev/rsvnd0a
partitionstabelle geupt
# fdisk -c 978 -h 16 -s 32 -f /usr/mdec/mbr -e svnd0
fdisk: 1> reinit
fdisk: 1> update
fdisk: 1> print
fdisk: 1> write
fdisk: 1> quit
das ganze gemountet
# mount /dev/svnd0a /mnt/wrap
# cp /usr/mdec/boot /mnt/wrap/
dann noch bsd, bsd.rd, base36.tgz, comp36.tgz und misc36.tgz draufentpackt
den bootloader rüberkopiert
# /usr/mdec/installboot /mnt/wrap/boot /usr/mdec/biosboot svnd0
das ganze geunmountet
# umount /mnt/wrap
# vnconfig -u svnd0
und dann das image auf die karte kopiert
# dd if=disk.image of=/dev/rsd1c bs=512
sodele, jetzt hab ich allerdings das problem das beim booten des wrap angezeigt wird das / 0 gross ist....
im tutorial steht das man schaun soll welche geometriedaten der wrap ausspuckt und diese soll man dann nehmen, das habich getan aber irgendwie