ADSL Conexant ?

[onegroup]

Hi,


ich habe hier ein Via C3 mit ADSL Modem was über USB angesprochen wird.


Laut Hersteller:

DChipset: Conexant
¡DANSI T1.413 Issue 2, ITU-T G.992.1
(G.dmt) and G.992.2 (G.lite) Annex
A,B
¡DFull-rate adaptive modem - maximum
downstream rate of 8 Mbps
- Maximum upstream rate of 1 Mbps
¡DWAN mode support - PPP over ATM
(RFC 2364)
- PPP over Ethernet (RFC 2516)
¡DLAN mode support - Bridged / routed
Ethernet over ATM (RFC 2684/1483)
- Classical IP over ATM (RFC 2225 /
1577)
¡DCompatible with Windows
98/ME/2000/XP and Linux


in Messages:

/kernel: uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 0 at device 7.2 on pci0
/kernel: pci_cfgintr_search: linked (2) to configured irq 12 at 0:8:0
/kernel: pci_cfgintr: 0:7 INTD routed to irq 12
/kernel: usb0: <VIA 83C572 USB controller> on uhci0
/kernel: usb0: USB revision 1.0
/kernel: uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
/kernel: uhub0: 2 ports with 2 removable, self powered
/kernel: uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f at device 7.3 on pci0
/kernel: pci_cfgintr_search: linked (2) to configured irq 12 at 0:8:0
/kernel: pci_cfgintr: 0:7 INTD routed to irq 12
/kernel: usb1: <VIA 83C572 USB controller> on uhci1
/kernel: usb1: USB revision 1.0
/kernel: uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
/kernel: uhub1: 2 ports with 2 removable, self powered
/kernel: ugen0: - ADSL USB MODEM, rev 1.10/0.01, addr 2
/kernel: pci0: <unknown card> (vendor=0x1106, dev=0x3057) at 7.4


Weiss jemand wie ich das Teil eventl ansprechen kann?

Gruss

S.