Evtl. interessiert es jemanden:
AMD 5800X auf ASRockRack X570D4U-2L2T mit FreeBSD 13.0 Release
2x Kingston KSM32ED8/32ME 32GB, DDR4-3200, CL22-22-22, ECC - mit 4 Modulen sinkt der Takt auf 2666
die SAS Controller sind nicht Teil des Mainboards
AMD 5800X auf ASRockRack X570D4U-2L2T mit FreeBSD 13.0 Release
2x Kingston KSM32ED8/32ME 32GB, DDR4-3200, CL22-22-22, ECC - mit 4 Modulen sinkt der Takt auf 2666
die SAS Controller sind nicht Teil des Mainboards
Code:
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-RELEASE #0 releng/13.0-n244733-ea31abc261f: Fri Apr 9 04:24:09 UTC 2021
root@releng1.nyi.freebsd.org:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 11.0.1 (git@github.com:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe)
VT(efifb): resolution 800x600
CPU: AMD Ryzen 7 5800X 8-Core Processor (3800.07-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0xa20f10 Family=0x19 Model=0x21 Stepping=0
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,ADMSKX>
Structured Extended Features=0x219c97a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA>
Structured Extended Features2=0x40068c<UMIP,PKU,VAES,VPCLMULQDQ,RDPID>
Structured Extended Features3=0x10<FSRM>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
AMD Extended Feature Extensions ID EBX=0x111ef657<CLZERO,IRPerf,XSaveErPtr,RDPRU,WBNOINVD,IBPB,IBRS,STIBP,STIBP_ALWAYSON,PREFER_IBRS,SSBD>
SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
TSC: P-state invariant, performance statistics
real memory = 68717379584 (65534 MB)
avail memory = 66788495360 (63694 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
FreeBSD/SMP: 1 package(s) x 8 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.1> irqs 0-23
ioapic1 <Version 2.1> irqs 24-55
Launching APs: 1 7 4 15 8 2 10 12 9 11 14 13 3 5 6
Timecounter "TSC-low" frequency 1900036955 Hz quality 1000
KTLS: Initialized 16 threads
random: entropy device external interface
000.000019 [4354] netmap_init netmap: loaded module
[ath_hal] loaded
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd1 at kbdmux0
mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020)
nexus0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto>
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
acpi0: <ALASKA A M I >
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 350
Event timer "HPET2" frequency 14318180 Hz quality 350
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 1.2 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 28 at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 2.0 on pci2
pci3: <ACPI PCI bus> on pcib3
ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0xfc800000-0xfcbfffff,0xfcc04000-0xfcc07fff irq 30 at device 0.0 on pci3
ix0: Using 2048 TX descriptors and 2048 RX descriptors
ix0: Using 8 RX queues 8 TX queues
ix0: Using MSI-X interrupts with 9 vectors
ix0: allocated for 8 queues
ix0: allocated for 8 rx queues
ix0: Ethernet address: d0:50:99:f8:77:4d
ix0: PCI Express Bus: Speed 8.0GT/s Width x4
ix0: netmap queues/slots: TX 8/2048, RX 8/2048
ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0xfc400000-0xfc7fffff,0xfcc00000-0xfcc03fff irq 31 at device 0.1 on pci3
ix1: Using 2048 TX descriptors and 2048 RX descriptors
ix1: Using 8 RX queues 8 TX queues
ix1: Using MSI-X interrupts with 9 vectors
ix1: allocated for 8 queues
ix1: allocated for 8 rx queues
ix1: Ethernet address: d0:50:99:f8:77:4e
ix1: PCI Express Bus: Speed 8.0GT/s Width x4
ix1: netmap queues/slots: TX 8/2048, RX 8/2048
pcib4: <ACPI PCI-PCI bridge> at device 4.0 on pci2
pci4: <ACPI PCI bus> on pcib4
igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xd000-0xd01f mem 0xfb700000-0xfb77ffff,0xfb780000-0xfb783fff irq 28 at device 0.0 on pci4
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 4 RX queues 4 TX queues
igb0: Using MSI-X interrupts with 5 vectors
igb0: Ethernet address: d0:50:99:f8:77:4c
igb0: netmap queues/slots: TX 4/1024, RX 4/1024
pcib5: <ACPI PCI-PCI bridge> at device 5.0 on pci2
pci5: <ACPI PCI bus> on pcib5
igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xc000-0xc01f mem 0xfb600000-0xfb67ffff,0xfb680000-0xfb683fff irq 29 at device 0.0 on pci5
igb1: Using 1024 TX descriptors and 1024 RX descriptors
igb1: Using 4 RX queues 4 TX queues
igb1: Using MSI-X interrupts with 5 vectors
igb1: Ethernet address: d0:50:99:f8:77:4b
igb1: netmap queues/slots: TX 4/1024, RX 4/1024
pcib6: <ACPI PCI-PCI bridge> at device 6.0 on pci2
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 30 at device 0.0 on pci6
pci7: <ACPI PCI bus> on pcib7
vgapci0: <VGA-compatible display> port 0xb000-0xb07f mem 0xfa000000-0xfaffffff,0xfb000000-0xfb01ffff irq 30 at device 0.0 on pci7
vgapci0: Boot video device
pcib8: <ACPI PCI-PCI bridge> irq 28 at device 8.0 on pci2
pci8: <ACPI PCI bus> on pcib8
pci8: <unknown> at device 0.0 (no driver attached)
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfb300000-0xfb3fffff irq 28 at device 0.1 on pci8
xhci0: 64 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfb200000-0xfb2fffff irq 30 at device 0.3 on pci8
xhci1: 64 bytes context size, 64-bit DMA
usbus1 on xhci1
usbus1: 5.0Gbps Super Speed USB v3.0
pcib9: <PCI-PCI bridge> irq 29 at device 9.0 on pci2
pci9: <PCI bus> on pcib9
ahci0: <AMD KERNCZ AHCI SATA controller> mem 0xfb500000-0xfb5007ff irq 29 at device 0.0 on pci9
ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier supported with FBS
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
pcib10: <PCI-PCI bridge> irq 30 at device 10.0 on pci2
pci10: <PCI bus> on pcib10
ahci1: <AMD KERNCZ AHCI SATA controller> mem 0xfb400000-0xfb4007ff irq 30 at device 0.0 on pci10
ahci1: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS
ahcich4: <AHCI channel> at channel 0 on ahci1
pcib11: <ACPI PCI-PCI bridge> at device 3.1 on pci0
pci11: <ACPI PCI bus> on pcib11
mpr0: <Avago Technologies (LSI) SAS3008> port 0xf000-0xf0ff mem 0xfc040000-0xfc04ffff,0xfc000000-0xfc03ffff irq 54 at device 0.0 on pci11
mpr0: Firmware: 16.00.10.00, Driver: 23.00.00.00-fbsd
mpr0: IOCCapabilities: 7a85c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,MSIXIndex,HostDisc,FastPath,RDPQArray>
pcib12: <ACPI PCI-PCI bridge> at device 3.2 on pci0
pci12: <ACPI PCI bus> on pcib12
mpr1: <Avago Technologies (LSI) SAS3008> port 0xe000-0xe0ff mem 0xfbe40000-0xfbe4ffff,0xfbe00000-0xfbe3ffff irq 50 at device 0.0 on pci12
mpr1: Firmware: 16.00.10.00, Driver: 23.00.00.00-fbsd
mpr1: IOCCapabilities: 7a85c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,MSIXIndex,HostDisc,FastPath,RDPQArray>
pcib13: <ACPI PCI-PCI bridge> at device 7.1 on pci0
pci13: <ACPI PCI bus> on pcib13
pci13: <unknown> at device 0.0 (no driver attached)
pcib14: <ACPI PCI-PCI bridge> at device 8.1 on pci0
pci14: <ACPI PCI bus> on pcib14
pci14: <unknown> at device 0.0 (no driver attached)
pci14: <encrypt/decrypt> at device 0.1 (no driver attached)
xhci2: <XHCI (generic) USB 3.0 controller> mem 0xfba00000-0xfbafffff irq 39 at device 0.3 on pci14
xhci2: 64 bytes context size, 64-bit DMA
usbus2 on xhci2
usbus2: 5.0Gbps Super Speed USB v3.0
hdac0: <AMD X570 HDA Controller> mem 0xfbc00000-0xfbc07fff irq 36 at device 0.4 on pci14
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc87ff pnpid ORM0000 on isa0
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounters tick every 1.000 msec
ugen1.1: <0x1022 XHCI root HUB> at usbus1
ugen0.1: <0x1022 XHCI root HUB> at usbus0
ugen2.1: <0x1022 XHCI root HUB> at usbus2
uhub0 on usbus1
uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
uhub1 on usbus0
uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub2 on usbus2
uhub2: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2
Trying to mount root from ufs:/dev/ada0p3 [rw]...
Root mount waiting for: usbus0 usbus1 CAM usbus2
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <SAMSUNG MZ7LH240HAHQ-00005 HXT7104Q> ACS-4 ATA SATA 3.x device
ada0: Serial Number S45RNF0K900103
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 228936MB (468862128 512 byte sectors)
ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN>
ada1 at ahcich3 bus 0 scbus1 target 0 lun 0
ada1: <SAMSUNG MZ7LH240HAHQ-00005 HXT7104Q> ACS-4 ATA SATA 3.x device
ada1: Serial Number S45RNF0K900133
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 228936MB (468862128 512 byte sectors)
ada1: quirks=0x3<4K,NCQ_TRIM_BROKEN>
uhub2: 8 ports with 8 removable, self powered
uhub1: 10 ports with 10 removable, self powered
uhub0: 10 ports with 10 removable, self powered
ugen1.2: <Novatek Ultra Flat Keyboard> at usbus1
ukbd0 on uhub0
ukbd0: <Novatek Ultra Flat Keyboard, class 0/0, rev 1.10/1.10, addr 1> on usbus1
kbd2 at ukbd0
hid_get_item: HID_ITEM_MAXUSAGE should be increased up to 31 to parse the HID report descriptor
Root mount waiting for: usbus1
ugen1.3: <American Megatrends Inc. Virtual Hub> at usbus1
uhub3 on uhub0
uhub3: <7-port Hub> on usbus1
Root mount waiting for: usbus1
uhub3: 5 ports with 5 removable, self powered
Root mount waiting for: usbus1
ugen1.4: <American Megatrends Inc. Virtual Cdrom Device> at usbus1
umass0 on uhub3
umass0: <Virtual Cdrom> on usbus1
umass0: SCSI over Bulk-Only; quirks = 0x0100
umass0:5:0: Attached to scbus5
cd0 at umass-sim0 bus 0 scbus5 target 0 lun 0
cd0: <AMI Virtual CDROM0 1.00> Removable CD-ROM SCSI device
cd0: Serial Number AAAABBBBCCCC1
cd0: 40.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd0: quirks=0x10<10_BYTE_ONLY>
ugen1.5: <American Megatrends Inc. Virtual Ethernet> at usbus1
Root mount waiting for: usbus1
ugen1.6: <American Megatrends Inc. Virtual Keyboard and Mouse> at usbus1
ukbd1 on uhub3
ukbd1: <Keyboard Interface> on usbus1
kbd3 at ukbd1
mountroot: waiting for device /dev/ada0p3...
intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: cannot find EC device
acpi_wmi0: Embedded MOF found
ACPI: \134AOD.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
driver bug: Unable to set devclass (class: ppc devname: (unknown))
lo0: link state changed to UP
hid_get_item: HID_ITEM_MAXUSAGE should be increased up to 31 to parse the HID report descriptor
hid_get_item: HID_ITEM_MAXUSAGE should be increased up to 31 to parse the HID report descriptor
hid_get_item: HID_ITEM_MAXUSAGE should be increased up to 31 to parse the HID report descriptor
hid_get_item: HID_ITEM_MAXUSAGE should be increased up to 31 to parse the HID report descriptor
uhid0 on uhub0
uhid0: <Novatek Ultra Flat Keyboard, class 0/0, rev 1.10/1.10, addr 1> on usbus1
hid_get_item: HID_ITEM_MAXUSAGE should be increased up to 31 to parse the HID report descriptor
hid_get_item: HID_ITEM_MAXUSAGE should be increased up to 31 to parse the HID report descriptor
hid_get_item: HID_ITEM_MAXUSAGE should be increased up to 31 to parse the HID report descriptor
urndis0 on uhub3
urndis0: <RNDIS Notification Interface> on usbus1
ue0: <USB Ethernet> on urndis0
ue0: Ethernet address: b2:e4:45:da:ca:08
ums0 on uhub3
ums0: <Mouse Interface> on usbus1
ums0: 3 buttons and [Z] coordinates ID=0
igb0: link state changed to UP
