## ======================================================
## Hetzner Online GmbH - installimage - standard config
## ======================================================
## ====================
## HARD DISK DRIVE(S):
## ====================
# Onboard: WDC WD2000FYYZ-01UL1B2
DRIVE1 /dev/sda
# Onboard: WDC WD2000FYYZ-01UL1B2
DRIVE2 /dev/sdb
## ===============
## SOFTWARE RAID:
## ===============
## activate software RAID? < 0 | 1 >
SWRAID 1
## Choose the level for the software RAID < 0 | 1 | 10 >
SWRAIDLEVEL 1
## ==========
## HOSTNAME:
## ==========
## which hostname should be set?
##
HOSTNAME custom
## ==========================
## PARTITIONS / FILESYSTEMS:
## ==========================
## define your partitions and filesystems like this:
##
## PART <mountpoint/lvm> <filesystem/VG> <size in MB>
##
## * <mountpoint/lvm> mountpoint for this filesystem *OR* keyword 'lvm'
## to use this PART as volume group (VG) for LVM
## * <filesystem/VG> can be ext2, ext3, reiserfs, xfs, swap *OR* name
## of the LVM volume group (VG), if this PART is a VG
## * <size> you can use the keyword 'all' to assign all the
## remaining space of the drive to the *last* partition.
## you can use M/G/T for unit specification in MiB/GiB/TiB
##
## notes:
## - extended partitions are created automatically
## - '/boot' cannot be on a xfs filesystem
## - '/boot' cannot be on LVM!
## - when using software RAID 0, you need a '/boot' partition
##
## example without LVM (default):
## -> 4GB swapspace
## -> 512MB /boot
## -> 10GB /
## -> 5GB /tmp
## -> all the rest to /home
#PART swap swap 4G
#PART /boot ext2 512M
#PART / ext4 10G
#PART /tmp xfs 5G
#PART /home ext3 all
#
##
## to activate LVM, you have to define volume groups and logical volumes
##
## example with LVM:
#
## normal filesystems and volume group definitions:
## -> 512MB boot (not on lvm)
## -> all the rest for LVM VG 'vg0'
#PART /boot ext3 512M
#PART lvm vg0 all
#
## logical volume definitions:
#LV <VG> <name> <mount> <filesystem> <size>
#
#LV vg0 root / ext4 10G
#LV vg0 swap swap swap 4G
#LV vg0 tmp /tmp reiserfs 5G
#LV vg0 home /home xfs 20G
#
#
## your system has the following devices:
#
# Disk /dev/sda: 2000 GB (=> 1863 GiB)
# Disk /dev/sdb: 2000 GB (=> 1863 GiB)
#
## Based on your disks and which RAID level you will choose you have
## the following free space to allocate (in GiB):
# RAID 0: ~3726
# RAID 1: ~1863
#
PART swap swap 32G
PART /boot ext3 512M
PART / ext4 all
## ========================
## OPERATING SYSTEM IMAGE:
## ========================
## full path to the operating system image
## supported image sources: local dir, ftp, http, nfs
## supported image types: tar, tar.gz, tar.bz, tar.bz2, tar.xz, tgz, tbz, txz
## examples:
#
# local: /path/to/image/filename.tar.gz
# ftp: ftp://<user>:<password>@hostname/path/to/image/filename.tar.bz2
# http: http://<user>:<password>@hostname/path/to/image/filename.tbz
# https: https://<user>:<password>@hostname/path/to/image/filename.tbz
# nfs: hostname:/path/to/image/filename.tgz
#
# for validation of the image, place the detached gpg-signature
# and your public key in the same directory as your image file.
# naming examples:
# signature: filename.tar.bz2.sig
# public key: public-key.asc
IMAGE
