Hallo zusammen.
Ich versuche grade obiges zu installieren. Die ISDN Karte (ihfc0@pci2:4:0: class=0x028000 card=0x3069182d chip=0x3069182d rev=0x02 hdr=0x00
vendor = 'SiteCom Europe BV'
device = 'ISDN PCI DC-105V2'
class = network) soll Gespräche ins ISDN Netz weiterleiten. Ein neuer Kernel wurde kompiliert, inklusive i4b. Die Karte wird ja ganz offensichtlich auch erkannt:
ihfc0: <HFC-2BDS0 128K PCI ISDN adapter> port 0xbc00-0xbc07 mem 0xff911000-0xff9110ff irq 18 at device 4.0 on pci2
ihfc0: Attaching I4B controller 0.
ihfc0: Creating /dev/ihfc0.X.
ihfc0: <HFC-2BDS0 128K PCI ISDN adapter> port 0xbc00-0xbc07 mem 0xff911000-0xff9110ff irq 18 at device 4.0 on pci2
ihfc0: Attaching I4B controller 0.
ihfc0: Creating /dev/ihfc0.X.
Doch ein ztcfg -vvv liefert nur:
[root@breakout /usr/local/etc/asterisk]# ztcfg -vvv
Keyword: [loadzone], Value: [nl]
Keyword: [defaultzone], Value: [nl]
Keyword: [span], Value: [1,1,3,ccs,ami]
Keyword: [bchan], Value: [1-2]
Keyword: [dchan], Value: [3]
Zaptel Version: 1.4.0-BSD
Echo Canceller: MG2
Configuration
======================
SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1)
Channel map:
Channel 01: Clear channel (Default) (Slaves: 01)
Channel 02: Clear channel (Default) (Slaves: 02)
Channel 03: D-channel (Default) (Slaves: 03)
3 channels configured.
ZT_SPANCONFIG failed on span 1: Device not configured (6)
Die letzte Zeile macht mich dann doch etwas stutzig....
Ach ja, das ganze unter 6.1-RELEASE
Für jeden Tip dankbar!
Ich versuche grade obiges zu installieren. Die ISDN Karte (ihfc0@pci2:4:0: class=0x028000 card=0x3069182d chip=0x3069182d rev=0x02 hdr=0x00
vendor = 'SiteCom Europe BV'
device = 'ISDN PCI DC-105V2'
class = network) soll Gespräche ins ISDN Netz weiterleiten. Ein neuer Kernel wurde kompiliert, inklusive i4b. Die Karte wird ja ganz offensichtlich auch erkannt:
ihfc0: <HFC-2BDS0 128K PCI ISDN adapter> port 0xbc00-0xbc07 mem 0xff911000-0xff9110ff irq 18 at device 4.0 on pci2
ihfc0: Attaching I4B controller 0.
ihfc0: Creating /dev/ihfc0.X.
ihfc0: <HFC-2BDS0 128K PCI ISDN adapter> port 0xbc00-0xbc07 mem 0xff911000-0xff9110ff irq 18 at device 4.0 on pci2
ihfc0: Attaching I4B controller 0.
ihfc0: Creating /dev/ihfc0.X.
Doch ein ztcfg -vvv liefert nur:
[root@breakout /usr/local/etc/asterisk]# ztcfg -vvv
Keyword: [loadzone], Value: [nl]
Keyword: [defaultzone], Value: [nl]
Keyword: [span], Value: [1,1,3,ccs,ami]
Keyword: [bchan], Value: [1-2]
Keyword: [dchan], Value: [3]
Zaptel Version: 1.4.0-BSD
Echo Canceller: MG2
Configuration
======================
SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1)
Channel map:
Channel 01: Clear channel (Default) (Slaves: 01)
Channel 02: Clear channel (Default) (Slaves: 02)
Channel 03: D-channel (Default) (Slaves: 03)
3 channels configured.
ZT_SPANCONFIG failed on span 1: Device not configured (6)
Die letzte Zeile macht mich dann doch etwas stutzig....
Ach ja, das ganze unter 6.1-RELEASE
Für jeden Tip dankbar!