CAM status: Uncorrectable parity/CRC error

Alexander88207

Well-Known Member
Guten Abend.

Schon direkt beim aufsetzen von freebsd kommt mir der fehler entgegengesprungen. Hätte jemand vielleicht ideen was ich machen könnte? SATA Kabel habe ich schon ersetzt. Während der fehler kommt ist alles eingefroren.


Code:
(ada0:ahcich0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 00 d4 ad 40 23 00 00 01 00 00
(ada0:ahcich0:0:0:0): CAM status: Uncorrectable parity/CRC error
(ada0:ahcich0:0:0:0): Retrying command, 3 more tries remain
(ada0:ahcich0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 00 d5 ad 40 23 00 00 01 00 00
(ada0:ahcich0:0:0:0): CAM status: Uncorrectable parity/CRC error
(ada0:ahcich0:0:0:0): Retrying command, 3 more tries remain
(ada0:ahcich0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 00 d6 ad 40 23 00 00 01 00 00
(ada0:ahcich0:0:0:0): CAM status: Uncorrectable parity/CRC error
(ada0:ahcich0:0:0:0): Retrying command, 3 more tries remain
(ada0:ahcich0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 00 d7 ad 40 23 00 00 01 00 00
(ada0:ahcich0:0:0:0): CAM status: Uncorrectable parity/CRC error
(ada0:ahcich0:0:0:0): Retrying command, 3 more tries remain
(ada0:ahcich0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 00 d8 ad 40 23 00 00 01 00 00
(ada0:ahcich0:0:0:0): CAM status: Uncorrectable parity/CRC error
(ada0:ahcich0:0:0:0): Retrying command, 3 more tries remain
(ada0:ahcich0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 00 d9 ad 40 23 00 00 01 00 00
(ada0:ahcich0:0:0:0): CAM status: Uncorrectable parity/CRC error
(ada0:ahcich0:0:0:0): Retrying command, 3 more tries remain
(ada0:ahcich0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 00 da ad 40 23 00 00 01 00 00
(ada0:ahcich0:0:0:0): CAM status: Uncorrectable parity/CRC error
(ada0:ahcich0:0:0:0): Retrying command, 3 more tries remain
(ada0:ahcich0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 00 cb ad 40 23 00 00 01 00 00
(ada0:ahcich0:0:0:0): CAM status: Uncorrectable parity/CRC error
(ada0:ahcich0:0:0:0): Retrying command, 3 more tries remain
(ada0:ahcich0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 00 cc ad 40 23 00 00 01 00 00
(ada0:ahcich0:0:0:0): CAM status: Uncorrectable parity/CRC error
(ada0:ahcich0:0:0:0): Retrying command, 3 more tries remain
(ada0:ahcich0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 00 cd ad 40 23 00 00 01 00 00
(ada0:ahcich0:0:0:0): CAM status: Uncorrectable parity/CRC error
(ada0:ahcich0:0:0:0): Retrying command, 3 more tries remain
(ada0:ahcich0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 00 ce ad 40 23 00 00 01 00 00
(ada0:ahcich0:0:0:0): CAM status: Uncorrectable parity/CRC error
(ada0:ahcich0:0:0:0): Retrying command, 3 more tries remain
(ada0:ahcich0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 00 cf ad 40 23 00 00 01 00 00
(ada0:ahcich0:0:0:0): CAM status: Uncorrectable parity/CRC error
(ada0:ahcich0:0:0:0): Retrying command, 3 more tries remain
(ada0:ahcich0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 00 d0 ad 40 23 00 00 01 00 00
(ada0:ahcich0:0:0:0): CAM status: Uncorrectable parity/CRC error
(ada0:ahcich0:0:0:0): Retrying command, 3 more tries remain
(ada0:ahcich0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 00 d1 ad 40 23 00 00 01 00 00
(ada0:ahcich0:0:0:0): CAM status: Uncorrectable parity/CRC error
(ada0:ahcich0:0:0:0): Retrying command, 3 more tries remain
(ada0:ahcich0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 00 d2 ad 40 23 00 00 01 00 00
(ada0:ahcich0:0:0:0): CAM status: Uncorrectable parity/CRC error
(ada0:ahcich0:0:0:0): Retrying command, 3 more tries remain
(ada0:ahcich0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 00 c3 ad 40 23 00 00 01 00 00
(ada0:ahcich0:0:0:0): CAM status: Uncorrectable parity/CRC error
(ada0:ahcich0:0:0:0): Retrying command, 3 more tries remain
(ada0:ahcich0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 00 c4 ad 40 23 00 00 01 00 00
(ada0:ahcich0:0:0:0): CAM status: Uncorrectable parity/CRC error
(ada0:ahcich0:0:0:0): Retrying command, 3 more tries remain
(ada0:ahcich0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 00 c5 ad 40 23 00 00 01 00 00
(ada0:ahcich0:0:0:0): CAM status: Uncorrectable parity/CRC error
(ada0:ahcich0:0:0:0): Retrying command, 3 more tries remain
(ada0:ahcich0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 00 c6 ad 40 23 00 00 01 00 00
(ada0:ahcich0:0:0:0): CAM status: Uncorrectable parity/CRC error
(ada0:ahcich0:0:0:0): Retrying command, 3 more tries remain
(ada0:ahcich0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 00 c7 ad 40 23 00 00 01 00 00
(ada0:ahcich0:0:0:0): CAM status: Uncorrectable parity/CRC error
(ada0:ahcich0:0:0:0): Retrying command, 3 more tries remain
(ada0:ahcich0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 00 c8 ad 40 23 00 00 01 00 00
(ada0:ahcich0:0:0:0): CAM status: Uncorrectable parity/CRC error
(ada0:ahcich0:0:0:0): Retrying command, 3 more tries remain
(ada0:ahcich0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 00 c9 ad 40 23 00 00 01 00 00
(ada0:ahcich0:0:0:0): CAM status: Uncorrectable parity/CRC error
(ada0:ahcich0:0:0:0): Retrying command, 3 more tries remain
(ada0:ahcich0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 00 ca ad 40 23 00 00 01 00 00
(ada0:ahcich0:0:0:0): CAM status: Uncorrectable parity/CRC error
(ada0:ahcich0:0:0:0): Retrying command, 3 more tries remain
(ada0:ahcich0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 00 bb ad 40 23 00 00 01 00 00
(ada0:ahcich0:0:0:0): CAM status: Uncorrectable parity/CRC error
(ada0:ahcich0:0:0:0): Retrying command, 3 more tries remain
(ada0:ahcich0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 00 bc ad 40 23 00 00 01 00 00
(ada0:ahcich0:0:0:0): CAM status: Uncorrectable parity/CRC error
(ada0:ahcich0:0:0:0): Retrying command, 3 more tries remain
(ada0:ahcich0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 00 bd ad 40 23 00 00 01 00 00
(ada0:ahcich0:0:0:0): CAM status: Uncorrectable parity/CRC error
(ada0:ahcich0:0:0:0): Retrying command, 3 more tries remain
(ada0:ahcich0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 00 be ad 40 23 00 00 01 00 00
(ada0:ahcich0:0:0:0): CAM status: Uncorrectable parity/CRC error
(ada0:ahcich0:0:0:0): Retrying command, 3 more tries remain
(ada0:ahcich0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 00 bf ad 40 23 00 00 01 00 00
(ada0:ahcich0:0:0:0): CAM status: Uncorrectable parity/CRC error
(ada0:ahcich0:0:0:0): Retrying command, 3 more tries remain
(ada0:ahcich0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 00 c0 ad 40 23 00 00 01 00 00
(ada0:ahcich0:0:0:0): CAM status: Uncorrectable parity/CRC error
(ada0:ahcich0:0:0:0): Retrying command, 3 more tries remain
(ada0:ahcich0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 00 c1 ad 40 23 00 00 01 00 00
(ada0:ahcich0:0:0:0): CAM status: Uncorrectable parity/CRC error
(ada0:ahcich0:0:0:0): Retrying command, 3 more tries remain
(ada0:ahcich0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 00 c2 ad 40 23 00 00 01 00 00
(ada0:ahcich0:0:0:0): CAM status: Uncorrectable parity/CRC error
(ada0:ahcich0:0:0:0): Retrying command, 3 more tries remain
(ada0:ahcich0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 00 d3 ad 40 23 00 00 01 00 00
(ada0:ahcich0:0:0:0): CAM status: Uncorrectable parity/CRC error
(ada0:ahcich0:0:0:0): Retrying command, 3 more tries remain

Code:
sudo smartctl -a /dev/ada0
smartctl 7.0 2018-12-30 r4883 [FreeBSD 12.0-RELEASE amd64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Samsung based SSDs
Device Model:     Samsung SSD 860 EVO 500GB
Serial Number:    S3Z2NB1K777779N
LU WWN Device Id: 5 002538 e40617316
Firmware Version: RVT01B6Q
User Capacity:    500,107,862,016 bytes [500 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-4 T13/BSR INCITS 529 revision 5
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sat Sep  7 20:17:33 2019 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)    Offline data collection activity
                    was never started.
                    Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)    The previous self-test routine completed
                    without error or no self-test has ever
                    been run.
Total time to complete Offline
data collection:         (    0) seconds.
Offline data collection
capabilities:              (0x53) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    No Offline surface scan supported.
                    Self-test supported.
                    No Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine
recommended polling time:      (   2) minutes.
Extended self-test routine
recommended polling time:      (  85) minutes.
SCT capabilities:            (0x003d)    SCT Status supported.
                    SCT Error Recovery Control supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   099   099   000    Old_age   Always       -       2878
12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       716
177 Wear_Leveling_Count     0x0013   090   090   000    Pre-fail  Always       -       138
179 Used_Rsvd_Blk_Cnt_Tot   0x0013   100   100   010    Pre-fail  Always       -       0
181 Program_Fail_Cnt_Total  0x0032   100   100   010    Old_age   Always       -       0
182 Erase_Fail_Count_Total  0x0032   100   100   010    Old_age   Always       -       0
183 Runtime_Bad_Block       0x0013   100   100   010    Pre-fail  Always       -       0
187 Uncorrectable_Error_Cnt 0x0032   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0032   066   054   000    Old_age   Always       -       34
195 ECC_Error_Rate          0x001a   200   200   000    Old_age   Always       -       0
199 CRC_Error_Count         0x003e   095   095   000    Old_age   Always       -       4759
235 POR_Recovery_Count      0x0012   099   099   000    Old_age   Always       -       121
241 Total_LBAs_Written      0x0032   099   099   000    Old_age   Always       -       71478163116

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%      2255         -
# 2  Short offline       Completed without error       00%      2254         -

SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
 
..ähnliches Problem hier. Habe die Samsung 860 EVO durch eine Cruzial MX500 ersetzet. Keine Probleme mehr.
 
Eine neue SSD zu kaufen wäre meine letzte option gewesen, eigendlich ist es schade da sie bei linux gute dienste geleistet hat. Nur eben bei freebsd treten schreibfehler auf.
 
ich hatte mir die Samsung 860 gekauft weil meine 840 einwandfrei funktioniert hatte. Die Cruzial is ok, guter Preis, performace is auch ok.
 
.... ich muss natürlich gestehen, dasss die 860 evo die ich gekauft habe unter win10 einwandfrei funtionieren.
 
Dann bleibt mir wohl nix anders übrig, laut google scheint die 860 bei freebsd sehr anfällig für sowas zu sein. Na dann danke für deine Beratung.
 
Hast du schon ein Firmware-Update probiert? Schlimmer machen wird es das nicht... :)
 
Hatte ein ähnliches Problem mit einer Transcend SSD. FreeBSD installieren ging nicht, Windows läuft einwandfrei. Ich meine mich dunkel zu erinnern, daß da mal was mit von der SSD gemeldeten Cluster Größen war, die von Win und FreeBSD unterschiedlich behandelt wurden. FreeBSD hat Werte direkt genommen und Win hat die anders ausgerechnet.
 
Zurück
Oben