Cups...

bluescreen · 22 Dezember 2005

Cups...(gelöst)

Tach zusammen ,

leidiges Thema......aber komme nicht weiter ! (Habe FBSD 6.0-p1)

Habe nen` HP-Deskjet-5740-Drucker und bekomme in nicht mehr zum laufen ,
das dumme an der Sache ist das er vorher auf FBSD 5.4 einwandfrei lief !

LogLevel :

D [22/Dec/2005:20:31:01 +0100] ReadClient: 5 GET /printers/Deskjet?op=print-test-page HTTP/1.1
D [22/Dec/2005:20:31:01 +0100] CGI /usr/local/libexec/cups/cgi-bin/printers.cgi started - PID = 1205
I [22/Dec/2005:20:31:01 +0100] Started "/usr/local/libexec/cups/cgi-bin/printers.cgi" (pid=1205)
D [22/Dec/2005:20:31:01 +0100] SendCommand: 5 file=8
D [22/Dec/2005:20:31:01 +0100] AcceptClient: 7 from localhost:631.
D [22/Dec/2005:20:31:01 +0100] ReadClient: 7 POST /printers/Deskjet HTTP/1.1
D [22/Dec/2005:20:31:01 +0100] print_job: request file type is application/postscript.
D [22/Dec/2005:20:31:01 +0100] check_quotas: requesting-user-name = 'root'
D [22/Dec/2005:20:31:01 +0100] print_job: requesting-user-name = 'root'
D [22/Dec/2005:20:31:01 +0100] Adding default job-sheets values "none,none"...
I [22/Dec/2005:20:31:01 +0100] Adding start banner page "none" to job 19.
I [22/Dec/2005:20:31:01 +0100] Adding end banner page "none" to job 19.
I [22/Dec/2005:20:31:01 +0100] Job 19 queued on 'Deskjet' by 'root'.
D [22/Dec/2005:20:31:01 +0100] Job 19 hold_until = 0
D [22/Dec/2005:20:31:01 +0100] StartJob(19, 0x81a5000)
D [22/Dec/2005:20:31:01 +0100] StartJob() id = 19, file = 0/1
D [22/Dec/2005:20:31:01 +0100] job-sheets=none,none
D [22/Dec/2005:20:31:01 +0100] banner_page = 0
D [22/Dec/2005:20:31:01 +0100] StartJob: argv = "Deskjet","19","root","Test Page","1","","/var/spool/cups/d00019-001"
D [22/Dec/2005:20:31:01 +0100] StartJob: envp[0]="PATH=/usr/local/libexec/cups/filter:/bin:/usr/bin"
D [22/Dec/2005:20:31:01 +0100] StartJob: envp[1]="SOFTWARE=CUPS/1.1"
D [22/Dec/2005:20:31:01 +0100] StartJob: envp[2]="USER=root"
D [22/Dec/2005:20:31:01 +0100] StartJob: envp[3]="CHARSET=utf-8"
D [22/Dec/2005:20:31:01 +0100] StartJob: envp[4]="LANG=de"
D [22/Dec/2005:20:31:01 +0100] StartJob: envp[5]="PPD=/usr/local/etc/cups/ppd/Deskjet.ppd"
D [22/Dec/2005:20:31:01 +0100] StartJob: envp[6]="CUPS_SERVERROOT=/usr/local/etc/cups"
D [22/Dec/2005:20:31:01 +0100] StartJob: envp[7]="RIP_MAX_CACHE=8m"
D [22/Dec/2005:20:31:01 +0100] StartJob: envp[8]="TMPDIR=/var/spool/cups/tmp"
D [22/Dec/2005:20:31:01 +0100] StartJob: envp[9]="CONTENT_TYPE=application/postscript"
D [22/Dec/2005:20:31:01 +0100] StartJob: envp[10]="DEVICE_URI=usb:/dev/ulpt0"
D [22/Dec/2005:20:31:01 +0100] StartJob: envp[11]="PRINTER=Deskjet"
D [22/Dec/2005:20:31:01 +0100] StartJob: envp[12]="CUPS_DATADIR=/usr/local/share/cups"
D [22/Dec/2005:20:31:01 +0100] StartJob: envp[13]="CUPS_FONTPATH=/usr/local/share/cups/fonts"
D [22/Dec/2005:20:31:01 +0100] StartJob: envp[14]="CUPS_SERVER=localhost"
D [22/Dec/2005:20:31:01 +0100] StartJob: envp[15]="IPP_PORT=631"
D [22/Dec/2005:20:31:01 +0100] StartJob: statusfds = [ 9 10 ]
D [22/Dec/2005:20:31:01 +0100] StartJob: filterfds[1] = [ 11 -1 ]
D [22/Dec/2005:20:31:01 +0100] StartJob: filter = "/usr/local/libexec/cups/filter/pstops"
D [22/Dec/2005:20:31:01 +0100] StartJob: filterfds[0] = [ 12 13 ]
D [22/Dec/2005:20:31:01 +0100] start_process("/usr/local/libexec/cups/filter/pstops", 0xbfbed760, 0xbfbecad0, 11, 13, 10)
I [22/Dec/2005:20:31:01 +0100] Started filter /usr/local/libexec/cups/filter/pstops (PID 1206) for job 19.
D [22/Dec/2005:20:31:01 +0100] StartJob: filter = "/usr/local/libexec/cups/filter/foomatic-rip"
D [22/Dec/2005:20:31:01 +0100] StartJob: filterfds[1] = [ 11 14 ]
D [22/Dec/2005:20:31:01 +0100] start_process("/usr/local/libexec/cups/filter/foomatic-rip", 0xbfbed760, 0xbfbecad0, 12, 14, 10)
I [22/Dec/2005:20:31:01 +0100] Started filter /usr/local/libexec/cups/filter/foomatic-rip (PID 1207) for job 19.
D [22/Dec/2005:20:31:01 +0100] StartJob: backend = "/usr/local/libexec/cups/backend/usb"
D [22/Dec/2005:20:31:01 +0100] StartJob: filterfds[0] = [ -1 12 ]
D [22/Dec/2005:20:31:01 +0100] start_process("/usr/local/libexec/cups/backend/usb", 0xbfbed760, 0xbfbecad0, 11, 12, 10)
I [22/Dec/2005:20:31:01 +0100] Started backend /usr/local/libexec/cups/backend/usb (PID 1208) for job 19.
D [22/Dec/2005:20:31:01 +0100] ProcessIPPRequest: 7 status_code=0
D [22/Dec/2005:20:31:01 +0100] [Job 19] Page = 595x842; 10,36 to 585,833
D [22/Dec/2005:20:31:01 +0100] [Job 19] slowcollate=0, slowduplex=0, sloworder=0
D [22/Dec/2005:20:31:01 +0100] [Job 19] 0 %%BoundingBox: 0 0 612 792
D [22/Dec/2005:20:31:01 +0100] [Job 19] 0 %%Pages: 1
D [22/Dec/2005:20:31:01 +0100] [Job 19] 0 %%LanguageLevel: 1
D [22/Dec/2005:20:31:01 +0100] [Job 19] 0 %%DocumentData: Clean7Bit
D [22/Dec/2005:20:31:01 +0100] [Job 19] 0 %%DocumentSuppliedResources: procset testprint/1.1
D [22/Dec/2005:20:31:01 +0100] [Job 19] 0 %%DocumentNeededResources: font Helvetica Helvetica-Bold Times-Roman
D [22/Dec/2005:20:31:01 +0100] [Job 19] 0 %%Creator: Michael Sweet, Easy Software Products
D [22/Dec/2005:20:31:01 +0100] [Job 19] 0 %%CreationDate: May 11, 1999
D [22/Dec/2005:20:31:01 +0100] [Job 19] 0 %%Title: Test Page
D [22/Dec/2005:20:31:01 +0100] [Job 19] 0 %%EndComments
D [22/Dec/2005:20:31:01 +0100] [Job 19] 0 %%BeginProlog
D [22/Dec/2005:20:31:01 +0100] [Job 19] 0 %%BeginResource procset testprint 1.1 0
D [22/Dec/2005:20:31:01 +0100] [Job 19] 0 %%EndResource
D [22/Dec/2005:20:31:01 +0100] [Job 19] 0 %%EndProlog
D [22/Dec/2005:20:31:01 +0100] [Job 19] 0 %%Page: 1 1
D [22/Dec/2005:20:31:01 +0100] [Job 19] 0 %%Page: 1 1
D [22/Dec/2005:20:31:01 +0100] [Job 19] pw = 575.6, pl = 797.0
D [22/Dec/2005:20:31:01 +0100] [Job 19] PageLeft = 9.7, PageRight = 585.3
D [22/Dec/2005:20:31:01 +0100] [Job 19] PageTop = 833.0, PageBottom = 36.0
D [22/Dec/2005:20:31:01 +0100] [Job 19] PageWidth = 595.0, PageLength = 842.0
D [22/Dec/2005:20:31:01 +0100] [Job 19] 0 %%EOF
D [22/Dec/2005:20:31:01 +0100] [Job 19] Saw EOF!
D [22/Dec/2005:20:31:01 +0100] [Job 19] perl: warning: Setting locale failed.
D [22/Dec/2005:20:31:01 +0100] [Job 19] perl: warning: Please check that your locale settings:
D [22/Dec/2005:20:31:01 +0100] [Job 19] LC_ALL = (unset),
D [22/Dec/2005:20:31:01 +0100] [Job 19] LANG = "de"
D [22/Dec/2005:20:31:01 +0100] [Job 19] are supported and installed on your system.
D [22/Dec/2005:20:31:01 +0100] [Job 19] perl: warning: Falling back to the standard locale ("C").
D [22/Dec/2005:20:31:01 +0100] [Job 19] foomatic-rip version $Revision: 3.43.2.12 $ running...
D [22/Dec/2005:20:31:01 +0100] [Job 19] Parsing PPD file ...
D [22/Dec/2005:20:31:01 +0100] [Job 19] *cupsFilter: "application/vnd.cups-postscript 0 foomatic-rip"
D [22/Dec/2005:20:31:01 +0100] [Job 19] Added option ColorSpace
D [22/Dec/2005:20:31:01 +0100] [Job 19] Added option Resolution
D [22/Dec/2005:20:31:01 +0100] [Job 19] Added option PageSize
D [22/Dec/2005:20:31:01 +0100] [Job 19] Added option PageRegion
D [22/Dec/2005:20:31:01 +0100] [Job 19] Added option Model
D [22/Dec/2005:20:31:01 +0100] [Job 19] Added option PrintoutMode
D [22/Dec/2005:20:31:01 +0100] [Job 19] Added option ImageableArea
D [22/Dec/2005:20:31:01 +0100] [Job 19] Added option PaperDimension
D [22/Dec/2005:20:31:01 +0100] [Job 19] Added option InputSlot
D [22/Dec/2005:20:31:01 +0100] [Job 19] Added option Duplex
D [22/Dec/2005:20:31:01 +0100] [Job 19] Added option Quality
D [22/Dec/2005:20:31:01 +0100] [Job 19] Added option Font
D [22/Dec/2005:20:31:01 +0100] [Job 19]
D [22/Dec/2005:20:31:01 +0100] [Job 19] Parameter Summary
D [22/Dec/2005:20:31:01 +0100] [Job 19] -----------------
D [22/Dec/2005:20:31:01 +0100] [Job 19]
D [22/Dec/2005:20:31:01 +0100] [Job 19] Spooler: cups
D [22/Dec/2005:20:31:01 +0100] [Job 19] Printer: Deskjet
D [22/Dec/2005:20:31:01 +0100] [Job 19] PPD file: /usr/local/etc/cups/ppd/Deskjet.ppd
D [22/Dec/2005:20:31:01 +0100] [Job 19] Printer model: HP DeskJet 5740 Foomatic/hpijs (recommended)
D [22/Dec/2005:20:31:01 +0100] [Job 19] Job title: Test Page
D [22/Dec/2005:20:31:01 +0100] [Job 19] File(s) to be printed:
D [22/Dec/2005:20:31:01 +0100] [Job 19] <STDIN>
D [22/Dec/2005:20:31:01 +0100] [Job 19]
D [22/Dec/2005:20:31:01 +0100] [Job 19] GhostScript extra search path ('GS_LIB'): /usr/local/share/cups/fonts
D [22/Dec/2005:20:31:01 +0100] [Job 19]
D [22/Dec/2005:20:31:01 +0100] [Job 19] ================================================
D [22/Dec/2005:20:31:01 +0100] [Job 19]
D [22/Dec/2005:20:31:01 +0100] [Job 19] File: <STDIN>
D [22/Dec/2005:20:31:01 +0100] [Job 19]
D [22/Dec/2005:20:31:01 +0100] [Job 19] ================================================
D [22/Dec/2005:20:31:01 +0100] [Job 19]
D [22/Dec/2005:20:31:01 +0100] [Job 19] Reading PostScript input ...
D [22/Dec/2005:20:31:01 +0100] [Job 19] --> This document is DSC-conforming!
D [22/Dec/2005:20:31:01 +0100] [Job 19]
D [22/Dec/2005:20:31:01 +0100] [Job 19] -----------
D [22/Dec/2005:20:31:01 +0100] [Job 19] Found: %%BeginProlog
D [22/Dec/2005:20:31:01 +0100] [Job 19] Found: %%EndProlog
D [22/Dec/2005:20:31:01 +0100] [Job 19]
D [22/Dec/2005:20:31:01 +0100] [Job 19] -----------
D [22/Dec/2005:20:31:01 +0100] [Job 19] Found: %%BeginSetup
D [22/Dec/2005:20:31:01 +0100] [Job 19] Found: %%BeginFeature: *PrintoutMode Normal
D [22/Dec/2005:20:31:01 +0100] [Job 19] Option: PrintoutMode=Normal --> Setting option
D [22/Dec/2005:20:31:01 +0100] [Job 19] Found: %% FoomaticRIPOptionSetting: PrintoutMode=Normal
D [22/Dec/2005:20:31:01 +0100] [Job 19] Option: PrintoutMode=Normal --> Setting option
D [22/Dec/2005:20:31:01 +0100] [Job 19] Found: %%BeginFeature: *InputSlot Default
D [22/Dec/2005:20:31:01 +0100] [Job 19] Option: InputSlot=Default --> Setting option
D [22/Dec/2005:20:31:01 +0100] [Job 19] Found: %% FoomaticRIPOptionSetting: InputSlot=Default
D [22/Dec/2005:20:31:01 +0100] [Job 19] Option: InputSlot=Default --> Setting option
D [22/Dec/2005:20:31:01 +0100] [Job 19] Found: %%BeginFeature: *Quality FromPrintoutMode
D [22/Dec/2005:20:31:01 +0100] [Job 19] Option: Quality=FromPrintoutMode --> Setting option
D [22/Dec/2005:20:31:01 +0100] [Job 19] Found: %% FoomaticRIPOptionSetting: Quality=@PrintoutMode
D [22/Dec/2005:20:31:01 +0100] [Job 19] Option: Quality=FromPrintoutMode --> Setting option
D [22/Dec/2005:20:31:01 +0100] [Job 19] Found: %%BeginFeature: *PageRegion A4
D [22/Dec/2005:20:31:01 +0100] [Job 19] Option: PageRegion=A4 --> Option will be set by PostScript interpreter
D [22/Dec/2005:20:31:01 +0100] [Job 19] Found: %% FoomaticRIPOptionSetting: PageSize=A4
D [22/Dec/2005:20:31:01 +0100] [Job 19] Option: PageSize=A4 --> Setting option
D [22/Dec/2005:20:31:01 +0100] [Job 19] Found: %%BeginFeature: *Duplex None
D [22/Dec/2005:20:31:01 +0100] [Job 19] Option: Duplex=None --> Setting option
D [22/Dec/2005:20:31:01 +0100] [Job 19] Found: %% FoomaticRIPOptionSetting: Duplex=None
E [22/Dec/2005:20:31:01 +0100] PID 1207 stopped with status 3!
D [22/Dec/2005:20:31:01 +0100] [Job 19] Option: Duplex=None --> Setting option
D [22/Dec/2005:20:31:01 +0100] [Job 19] Found: %%EndSetup
D [22/Dec/2005:20:31:01 +0100] [Job 19] Inserting PostScript code for CUPS' page accounting
D [22/Dec/2005:20:31:01 +0100] [Job 19]
D [22/Dec/2005:20:31:01 +0100] [Job 19] -----------
D [22/Dec/2005:20:31:01 +0100] [Job 19] New page: 1 1
D [22/Dec/2005:20:31:01 +0100] [Job 19] Inserting option code into "PageSetup" section.
D [22/Dec/2005:20:31:01 +0100] [Job 19] No page header or page header not DSC-conforming
D [22/Dec/2005:20:31:01 +0100] [Job 19] Stopping search for page header options
D [22/Dec/2005:20:31:01 +0100] [Job 19] Found:
D [22/Dec/2005:20:31:01 +0100] [Job 19] pageHeight sub % Move down...
D [22/Dec/2005:20:31:01 +0100] [Job 19] --> Output goes directly to the renderer now.
D [22/Dec/2005:20:31:01 +0100] [Job 19]
D [22/Dec/2005:20:31:01 +0100] [Job 19]
D [22/Dec/2005:20:31:01 +0100] [Job 19] Starting renderer
D [22/Dec/2005:20:31:01 +0100] [Job 19] renderer PID kid4=1210
D [22/Dec/2005:20:31:01 +0100] [Job 19] renderer command: gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -sDeviceManufacturer="HEWLETT-PACKARD" -sDeviceModel="deskjet 5550" -dDEVICEWIDTHPOINTS=595 -dDEVICEHEIGHTPOINTS=842 -dDuplex=false -r300 -sIjsParams=Quality:Quality=0,Quality:ColorMode=2,Quality:MediaType=0,Quality:PenSet=2,PS:MediaPosition=7 -dIjsUseOutputFD -sOutputFile=- -
D [22/Dec/2005:20:31:01 +0100] [Job 19] JCL: <job data>
D [22/Dec/2005:20:31:01 +0100] [Job 19]
D [22/Dec/2005:20:31:01 +0100] [Job 19]
D [22/Dec/2005:20:31:01 +0100] [Job 19] Closing renderer
D [22/Dec/2005:20:31:01 +0100] [Job 19] perl: warning: Setting locale failed.
D [22/Dec/2005:20:31:01 +0100] [Job 19] perl: warning: Please check that your locale settings:
D [22/Dec/2005:20:31:01 +0100] [Job 19] LC_ALL = (unset),
D [22/Dec/2005:20:31:01 +0100] [Job 19] LANG = "de"
D [22/Dec/2005:20:31:01 +0100] [Job 19] are supported and installed on your system.
D [22/Dec/2005:20:31:01 +0100] [Job 19] perl: warning: Falling back to the standard locale ("C").
D [22/Dec/2005:20:31:01 +0100] [Job 19] foomatic-gswrapper: gs '-dBATCH' '-dPARANOIDSAFER' '-dQUIET' '-dNOPAUSE' '-sDEVICE=ijs' '-sIjsServer=hpijs' '-sDeviceManufacturer=HEWLETT-PACKARD' '-sDeviceModel=deskjet 5550' '-dDEVICEWIDTHPOINTS=595' '-dDEVICEHEIGHTPOINTS=842' '-dDuplex=false' '-r300' '-sIjsParams=Quality:Quality=0,Quality:ColorMode=2,Quality:MediaType=0,Quality:PenSet=2,PS:MediaPosition=7' '-dIjsUseOutputFD' '-sOutputFile=/dev/fd/3' '/dev/fd/0' 3>&1 1>&2
D [22/Dec/2005:20:31:01 +0100] [Job 19] **** Unable to open the initial device, quitting.
D [22/Dec/2005:20:31:01 +0100] [Job 19] renderer return value: 1
D [22/Dec/2005:20:31:01 +0100] [Job 19] renderer received signal: 1
D [22/Dec/2005:20:31:01 +0100] [Job 19] tail process done writing data to STDOUT
D [22/Dec/2005:20:31:01 +0100] [Job 19] KID4 exited with status 0
D [22/Dec/2005:20:31:01 +0100] [Job 19] KID3 exited with status 3
D [22/Dec/2005:20:31:01 +0100] [Job 19] Renderer exit stat: 3
D [22/Dec/2005:20:31:01 +0100] [Job 19] KID4 finished
D [22/Dec/2005:20:31:01 +0100] [Job 19] Process dying with "Possible error on renderer command line or PostScript error. Check options.", exit stat: 3
D [22/Dec/2005:20:31:01 +0100] [Job 19] error: No such file or directory (2)
D [22/Dec/2005:20:31:01 +0100] [Job 19] Possible error on renderer command line or PostScript error. Check options.
D [22/Dec/2005:20:31:01 +0100] [Job 19] Renderer process finished
D [22/Dec/2005:20:31:01 +0100] [Job 19] Killing process 1209 (KID3)
D [22/Dec/2005:20:31:01 +0100] [Job 19] Process dying with "Error closing renderer", exit stat: 3
D [22/Dec/2005:20:31:01 +0100] [Job 19] error: No such file or directory (2)
D [22/Dec/2005:20:31:01 +0100] [Job 19] Error closing renderer
D [22/Dec/2005:20:31:01 +0100] UpdateJob: job 19, file 0 is complete.
D [22/Dec/2005:20:31:01 +0100] CancelJob: id = 19
D [22/Dec/2005:20:31:01 +0100] StopJob: id = 19, force = 0
D [22/Dec/2005:20:31:01 +0100] StopJob: printer state is 3
D [22/Dec/2005:20:31:01 +0100] CloseClient: 7

aber leider kann ich mit den Meldungen nix anfangen !

gruss

:grumble:

Pagai · 22 Dezember 2005

gf

wieso kann man hier nicht seine eigenen beiträge löschen ?

Pagai · 22 Dezember 2005

sorry, hatte mich verklickt... bitte löschen !!

bluescreen · 22 Dezember 2005

Hallo nochmal ,

zwei Sachen im LogLevel versteh ich nicht :

- **** Unable to open the initial device, quitting

- Possible error on renderer command line or PostScript error. Check options

:confused:

bluescreen · 23 Dezember 2005

niemand n` Tip ?

;'(

cryptosteve · 23 Dezember 2005

Zugriff aufs Device hast Du? USB-Drucker-Unterstützung im Kernel? /dev/ulpt0 existiert?

bluescreen · 23 Dezember 2005

Hallo ,

also ich kann mit nem` Cups-Standard-Treiber ausdrucken !
Leider ist die Qualität mehr als miserabel !

Ich vermute das , daß irgendwie mit den Foomatic-Treibern bzw. Dateien
zu tun hat . Hab hier im Forum was drüber gefunden , das jemand ältere
foomatic-gswrapper- und foomatic-rip Dateien installiert hatte und es dann
lief .
Hab`s auch probiert , klappt nicht !
Hab auch schon alles was mit CUPS zu tun hatte de- und neu Installiert,
--> negativ !
Habe auch chmod 777 /dev/ulpt0 probiert , nix !
Ist zum Mäusemelken ! Weil wie gesagt , unter 5.4 funzte der einwandfrei !

gruss

:grumble:

P.S.: Die foomatic-Dateien hab ich von Kanotix genommen
weil da lässt sich der Drucker mit foomatic innerhalb
von Sekunden konfigurieren

bluescreen · 23 Dezember 2005

Hallo ,

vieleicht hilft`s ja jemandem !

-> pstoraster neu installiert , und aus /usr/ports/print
nochmal foomatic-db, foomatic-db-engine, foomatic-db-hpijs
und foomatic-filters !

Dann lief`s :confused:

Gruss

cryptosteve · 23 Dezember 2005

Komisch ... Glückstreffer?

bluescreen · 23 Dezember 2005

..weiss auch nicht ....seem so....

:ugly:

Cups...

bluescreen

verstört

Pagai

Active Member

Pagai

Active Member

bluescreen

verstört

bluescreen

verstört

cryptosteve

Ex-Steve`

bluescreen

verstört

bluescreen

verstört

cryptosteve

Ex-Steve`

bluescreen

verstört

Wir schützen deine Privatsphäre