s-tlk
Lion King Fan
hi,
ich hab hier ein acer travelmate 512T mit einer d-link dwl-g650 cardbus karte.
sie wird einwandfrei als ath0 erkannt, läßt sich auch konfigurieren und verbindet sich auch mit dem access point. nur wenn ich den router oder irgendeinen anderen rechner anpingen will, dann bekomme ich erst nach dem 20x (oder später) eine antwort. danach kommt dann erst mal wieder nichts. so zwischen 5 und 15 packeten kommt wieder was usw. an der reichweite kanns nicht liegen. ich sitze quasi neben dem router und ein freund kann ohne probleme surfen, pingen etc.
was im dmesg auffällt ist die Meldung: <arp: runt packet>
hier ist das komplette dmesg:
hat einer von euch eine idee dazu?
schon mal vielen dank für eure anregungen.
ich hab hier ein acer travelmate 512T mit einer d-link dwl-g650 cardbus karte.
sie wird einwandfrei als ath0 erkannt, läßt sich auch konfigurieren und verbindet sich auch mit dem access point. nur wenn ich den router oder irgendeinen anderen rechner anpingen will, dann bekomme ich erst nach dem 20x (oder später) eine antwort. danach kommt dann erst mal wieder nichts. so zwischen 5 und 15 packeten kommt wieder was usw. an der reichweite kanns nicht liegen. ich sitze quasi neben dem router und ein freund kann ohne probleme surfen, pingen etc.
was im dmesg auffällt ist die Meldung: <arp: runt packet>
hier ist das komplette dmesg:
Code:
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE #0: Mon Nov 15 16:48:21 CET 2004
michi@lapi:/usr/src/sys/i386/compile/LAPI
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium II/Pentium II Xeon/Celeron (365.81-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x66a Stepping = 10
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 67043328 (63 MB)
avail memory = 56008704 (53 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <Acer AN510> on motherboard
acpi0: Power Button (fixed)
acpi_ec0: <Embedded Controller: GPE 0xa> port 0x66,0x62 on acpi0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0xf108-0xf10b on acpi0
cpu0: <ACPI CPU (2 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: no PRT entry for 0.15.INTA
agp0: <Ali Generic host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci0: <simple comms> at device 6.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pcm0: <ESS Solo-1 (unknown vendor)> port 0x78a4-0x78a7,0x7890-0x7893,0x7870-0x787f,0x7850-0x785f,0x7800-0x783f irq 5 at device 8.0 on pci0
pcm0: [GIANT-LOCKED]
atapci0: <AcerLabs Aladdin UDMA33 controller> port 0x78c0-0x78cf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 15 at device 15.0 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <bridge, PCI-unknown> at device 17.0 (no driver attached)
cbb0: <O2Micro OZ6832/6833 PCI-CardBus Bridge> irq 9 at device 19.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <O2Micro OZ6832/6833 PCI-CardBus Bridge> irq 9 at device 19.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0x82100000-0x82100fff at device 20.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcbfff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: parallel port not found.
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
Timecounter "TSC" frequency 365807229 Hz quality 800
Timecounters tick every 10.000 msec
ath0: <Atheros 5212> mem 0x88000000-0x8800ffff irq 9 at device 0.0 on cardbus0
ath0: mac 5.9 phy 4.3 5ghz radio 4.6
ath0: Ethernet address: 00:0f:3d:87:01:09
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ad0: 4645MB <IBM-DBCA-204860/BC3OA87F> [10068/15/63] at ata0-master UDMA33
acd0: CDROM <CD-224E/1.5A> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
arp: runt packet
arp: runt packet
arp: runt packet
arp: runt packet
arp: runt packet
arp: runt packet
arp: runt packet
arp: runt packet
arp: runt packet
arp: runt packet
hat einer von euch eine idee dazu?
schon mal vielen dank für eure anregungen.