Digitalcam via USB unter 5.1 nicht erkannt

seven0fx · 19 Juni 2004

Hi,
ich möchte meine Digitalkamera unter FreeBSD 5.1 betreiben, doch leider wird sie nicht erkannt.
Unter Windows2000 läuft sie problemlos als Massenspeicher.

Ich habe schon mehrere Sachen mit 'Quirks' in umass.c probiert doch hatte leider kein Erfolg.
Ich habe meiner Kernelconfig die Einträge zum debuggen von USB hinzugefügt, vlt. kann mir einer Tips geben wie ich die Kamera doch noch zum laufen bekommen kann.

Kamera Modell: Praktika DCZ 2.1 mit 256MB Flash drin.

hier der Boot dmesg output:

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-RELEASE-p17 #4: Sat Jun 19 20:42:23 CEST 2004
root@amd.athome.lan:/mnt/15/usr_obj/mnt/15/usr_src/sys/amd1200

...
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f at device 7.2 on pci0
pcib0: slot 7 INTD is routed to irq 11
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
...
ad0: DMA limited to UDMA33, non-ATA66 cable or device
ad0: 39083MB <Maxtor 34098H4> [79408/16/63] at ata0-master UDMA33
ad1: 1226MB <FUJITSU M1636TAU> [2491/16/63] at ata0-slave WDMA2
ad1: hard error cmd=read fsbn 0 of 0-3 status=51 error=10
acd0: CD-RW <R/RW 4x4x32> at ata1-master WDMA2
acd1: DVD-R <SONY DVD RW DRU-510A> at ata1-slave UDMA33
cd0 at ata1 bus 0 target 0 lun 0
cd0: <IDE-CD R/RW 4x4x32 1.4B> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at ata1 bus 0 target 1 lun 0
cd1: <SONY DVD RW DRU-510A 1.0f> Removable CD-ROM SCSI-0 device
cd1: 33.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/ad0s3a

---------------------
hier /var/log/messages wenn ich die Kamera einstecke:

umass0: HHH DIGITAL CAMERA, rev 1.10/0.00, addr 2
umass0: 8070i (ATAPI) over Bulk-Only; quirks = 0x0000
umass0: Get Max Lun not supported (STALLED)
(noperiph:umass-sim0:0:-1:-1): xpt_compile_path
(noperiph:umass-sim0:0:-1:-1): xpt_setup_ccb
(noperiph:umass-sim0:0:-1:-1): xpt_action
(noperiph:umass-sim0:0:-1:-1): xpt_done
(noperiph:umass-sim0:0:-1:-1): xpt_async
(noperiph:umass-sim0:0:-1:-1): xpt_release_path
umass0:2:0:-1: Attached to scbus2
(xpt0:umass-sim0:0:-1:-1): xpt_compile_path
(xpt0:umass-sim0:0:-1:-1): xpt_setup_ccb
(xpt0:umass-sim0:0:-1:-1): xpt_action
(xpt0:umass-sim0:0:-1:-1): xpt_scan_bus
(xpt0:umass-sim0:0:-1:-1): xpt_setup_ccb
(xpt0:umass-sim0:0:-1:-1): xpt_action
(xpt0:umass-sim0:0:-1:-1): xpt_done
(xpt0:umass-sim0:0:0:0): xpt_compile_path
(xpt0:umass-sim0:0:0:0): xpt_setup_ccb
(xpt0:umass-sim0:0:0:0): xpt_action
(xpt0:umass-sim0:0:0:0): xpt_scan_lun
(xpt0:umass-sim0:0:0:0): xpt_setup_ccb
(xpt0:umass-sim0:0:0:0): xpt_action
(xpt0:umass-sim0:0:0:0): xpt_done
(probe0:umass-sim0:0:0:0): xpt_compile_path
(probe0:umass-sim0:0:0:0): xpt_setup_ccb
(probe0:umass-sim0:0:0:0): xpt_action
(probe0:umass-sim0:0:0:0): xpt_done
(probe0:umass-sim0:0:0:0): xpt_schedule
(probe0:umass-sim0:0:0:0): xpt_setup_ccb
(probe0:umass-sim0:0:0:0): probestart
(probe0:umass-sim0:0:0:0): xpt_action
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0
(probe0:umass-sim0:0:0:0): xpt_done
(probe0:umass-sim0:0:0:0): camisr
(probe0:umass-sim0:0:0:0): probedone
(probe0:umass-sim0:0:0:0): xpt_schedule
(probe0:umass-sim0:0:0:0): xpt_setup_ccb
(probe0:umass-sim0:0:0:0): probestart
(probe0:umass-sim0:0:0:0): xpt_action
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 1 80 0 ff 0
umass0: BBB reset failed, TIMEOUT
(probe0:umass-sim0:0:0:0): xpt_done
(probe0:umass-sim0:0:0:0): camisr
(probe0:umass-sim0:0:0:0): probedone
(probe0:umass-sim0:0:0:0): xpt_action
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 1 80 0 ff 0
umass0: BBB reset failed, TIMEOUT
(probe0:umass-sim0:0:0:0): xpt_done
(probe0:umass-sim0:0:0:0): camisr
(probe0:umass-sim0:0:0:0): probedone
(probe0:umass-sim0:0:0:0): xpt_action
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 1 80 0 ff 0
umass0: BBB reset failed, TIMEOUT
(probe0:umass-sim0:0:0:0): xpt_done
(probe0:umass-sim0:0:0:0): camisr
(probe0:umass-sim0:0:0:0): probedone
(probe0:umass-sim0:0:0:0): xpt_action
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 1 80 0 ff 0
umass0: BBB reset failed, TIMEOUT
(probe0:umass-sim0:0:0:0): xpt_done
(probe0:umass-sim0:0:0:0): camisr
(probe0:umass-sim0:0:0:0): probedone
(probe0:umass-sim0:0:0:0): xpt_action
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 1 80 0 ff 0
umass0: BBB reset failed, TIMEOUT
(probe0:umass-sim0:0:0:0): xpt_done
(probe0:umass-sim0:0:0:0): camisr
(probe0:umass-sim0:0:0:0): probedone
(probe0:umass-sim0:0:0:0): xpt_setup_ccb
(probe0:umass-sim0:0:0:0): xpt_action
(probe0:umass-sim0:0:0:0): xpt_done
(probe0:umass-sim0:0:0:0): xpt_action
(probe0:umass-sim0:0:0:0): xpt_setup_ccb
(probe0:umass-sim0:0:0:0): xpt_action
(probe0:umass-sim0:0:0:0): xpt_done
(probe0:umass-sim0:0:0:0): xpt_setup_ccb
(probe0:umass-sim0:0:0:0): xpt_action
(probe0:umass-sim0:0:0:0): xpt_done
(probe0:umass-sim0:0:0:0): xpt_done
(probe0:umass-sim0:0:0:0): xpt_schedule
(probe0:umass-sim0:0:0:0): xpt_setup_ccb
(probe0:umass-sim0:0:0:0): probestart
(probe0:umass-sim0:0:0:0): xpt_action
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
umass0: BBB reset failed, TIMEOUT
(probe0:umass-sim0:0:0:0): xpt_done
(probe0:umass-sim0:0:0:0): camisr
(probe0:umass-sim0:0:0:0): probedone
(probe0:umass-sim0:0:0:0): xpt_action
(xpt0:xpt0:0:-1:-1): xpt_async
(pass2:umass-sim0:0:0:0): xpt_compile_path
(pass2:umass-sim0:0:0:0): xpt_setup_ccb
(pass2:umass-sim0:0:0:0): xpt_action
(da0:umass-sim0:0:0:0): xpt_compile_path
(da0:umass-sim0:0:0:0): xpt_setup_ccb
(da0:umass-sim0:0:0:0): xpt_action
(da0:umass-sim0:0:0:0): xpt_schedule
(da0:umass-sim0:0:0:0): xpt_setup_ccb
(da0:umass-sim0:0:0:0): xpt_action
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(xpt0:umass-sim0:0:0:0): xpt_done
(probe0:umass-sim0:0:0:0): xpt_free_path
(probe0:umass-sim0:0:0:0): xpt_release_path
(xpt0:umass-sim0:0:0:0): camisr
(xpt0:umass-sim0:0:0:0): xpt_scan_bus
(xpt0:umass-sim0:0:0:0): xpt_setup_ccb
(xpt0:umass-sim0:0:0:0): xpt_action
(xpt0:umass-sim0:0:0:0): xpt_free_path
(xpt0:umass-sim0:0:0:0): xpt_release_path
(xpt0:umass-sim0:0:-1:-1): xpt_done
(xpt0:umass-sim0:0:-1:-1): camisr
(xpt0:umass-sim0:0:-1:-1): xpt_free_path
(xpt0:umass-sim0:0:-1:-1): xpt_release_path
(da0:umass-sim0:0:0:0): daopen: disk=da0 (unit 0)
umass0: BBB reset failed, TIMEOUT
(da0:umass-sim0:0:0:0): xpt_done
(da0:umass-sim0:0:0:0): camisr
(da0:umass-sim0:0:0:0): xpt_action
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
umass0: BBB reset failed, TIMEOUT
(da0:umass-sim0:0:0:0): xpt_done
(da0:umass-sim0:0:0:0): camisr
(da0:umass-sim0:0:0:0): xpt_action
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
umass0: BBB reset failed, TIMEOUT
(da0:umass-sim0:0:0:0): xpt_done
(da0:umass-sim0:0:0:0): camisr
(da0:umass-sim0:0:0:0): xpt_action
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
umass0: BBB reset failed, TIMEOUT
(da0:umass-sim0:0:0:0): xpt_done
(da0:umass-sim0:0:0:0): camisr
(da0:umass-sim0:0:0:0): xpt_action
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
umass0: BBB reset failed, TIMEOUT
(da0:umass-sim0:0:0:0): xpt_done
(da0:umass-sim0:0:0:0): camisr
(da0:umass-sim0:0:0:0): xpt_setup_ccb
(da0:umass-sim0:0:0:0): xpt_action
(da0:umass-sim0:0:0:0): got CAM status 0x4
(da0:umass-sim0:0:0:0): fatal error, failed to attach to device
(da0:umass-sim0:0:0:0): xpt_setup_ccb
(da0:umass-sim0:0:0:0): xpt_action
(da0:umass-sim0:0:0:0): lost device
(da0:umass-sim0:0:0:0): entering cdgetccb
(da0:umass-sim0:0:0:0): xpt_schedule
(da0:umass-sim0:0:0:0): xpt_setup_ccb
(da0:umass-sim0:0:0:0): xpt_action
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
umass0: BBB reset failed, TIMEOUT
(da0:umass-sim0:0:0:0): xpt_done
(da0:umass-sim0:0:0:0): camisr
(da0:umass-sim0:0:0:0): xpt_action
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
umass0: BBB reset failed, TIMEOUT
(da0:umass-sim0:0:0:0): xpt_done
(da0:umass-sim0:0:0:0): camisr
(da0:umass-sim0:0:0:0): xpt_action
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
umass0: BBB reset failed, TIMEOUT
(da0:umass-sim0:0:0:0): xpt_done
(da0:umass-sim0:0:0:0): camisr
(da0:umass-sim0:0:0:0): xpt_action
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
umass0: BBB reset failed, STALLED
(da0:umass-sim0:0:0:0): xpt_done
(da0:umass-sim0:0:0:0): camisr
(da0:umass-sim0:0:0:0): xpt_action
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
umass0: BBB reset failed, TIMEOUT
(da0:umass-sim0:0:0:0): xpt_done
(da0:umass-sim0:0:0:0): camisr
(da0:umass-sim0:0:0:0): removing device entry
(da0:umass-sim0:0:0:0): xpt_free_path
(da0:umass-sim0:0:0:0): xpt_release_path
Opened disk da0 -> 5
(xpt0:xpt0:0:-1:-1): xpt_action
--------------------------------
hier noch die Ausgabe von camcontrol und usbdevs:

amd# camcontrol devlist
<IDE-CD R/RW 4x4x32 1.4B> at scbus1 target 0 lun 0 (pass0,cd0)
<SONY DVD RW DRU-510A 1.0f> at scbus1 target 1 lun 0 (pass1,cd1)
<DIGITAL CAMERA DC2102 1.33> at scbus2 target 0 lun 0 (pass2)

amd# usbdevs -v
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), VIA(0x0000), rev 1.00
port 1 powered
port 2 addr 2: full speed, self powered, config 1, DIGITAL CAMERA(0x1688), HHH(0x0784), rev 0.00

amd# mount -t msdos /dev/da0 /mnt/cam/
msdosfs: /dev/da0: No such file or directory

für Tips wär ich dankbar..
mfg seVen

qfat · 19 Juni 2004

update dein system mal auf 5.2.1 ,da wurde der fehler behoben,
hatte auch nen mp3 player der auch so nen ähnlichen output produzierte.
in 5.2.1, geht er ohne probleme

d00ren · 19 Juni 2004

sieh mit disklabel da0 nach

seven0fx · 20 Juni 2004

ich habe mal ne 5.2.1 Mini-Install CD gebootet, die Kamera reingesteckt... es kommen die gleichen Fehlermeldungen

Code:

BBS reset failed...
GEOM: create disk da0...
BBS reset failed...
...
GEOM: destroy disk da0..
BBS reset failed...

also hat sich wohl bei USB in dieser Richtung nichts geändert

gruss seVen

Digitalcam via USB unter 5.1 nicht erkannt

seven0fx

informierter Heise-Leser

qfat

Well-Known Member

d00ren

Well-Known Member

seven0fx

informierter Heise-Leser

Wir schützen deine Privatsphäre