dmesg . cant assign resources

J

justice

Guest
Hi alle. Brauche wieder eure Hilfe.

Hier ist mein dmesg:


Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.9-RELEASE #1: Mon Jan 12 19:54:18 GMT 2004
justice@unix.hopto.org:/usr/src/sys/compile/justice
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (501.14-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x665 Stepping = 5
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA
T,PSE36,MMX,FXSR>
real memory = 536805376 (524224K bytes)
avail memory = 516562944 (504456K bytes)
Preloaded elf kernel "kernel" at 0xc0598000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82810 (i810 GMCH) Host To Hub bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82801AA (ICH) Hub to PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib1
rl0: <RealTek 8139 10/100BaseTX> port 0xd000-0xd0ff mem 0xda000000-0xda0000ff ir
q 10 at device 4.0 on pci1
rl0: Ethernet address: 00:30:84:41:f8:d0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci1: <NVidia Riva Ultra Vanta TNT2 graphics accelerator> at 5.0 irq 11
isab0: <Intel 82801AA (ICH) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH ATA66 controller> port 0xf000-0xf00f at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801AA (ICH) USB controller> port 0xe000-0xe01f irq 9 at device 3
1.2 on pci0
usb0: <Intel 82801AA (ICH) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pcm0: <Intel ICH (82801AA)> port 0xec00-0xec3f,0xe800-0xe8ff irq 11 at device 31
.5 on pci0
pcm0: <Analog Devices AD1881 AC97 Codec>
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: <PNP0000> can't assign resources
unknown: <PNP0303> can't assign resources
unknown: <PNP0f13> can't assign resources
unknown: <PNP0c02> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0401> can't assign resources
unknown: <PNP0501> can't assign resources
ad0: DMA limited to UDMA33, non-ATA66 cable or device
ad0: 39205MB <Maxtor 6E040L0> [79656/16/63] at ata0-master UDMA33
ad3: 8056MB <ST38421A> [16368/16/63] at ata1-slave UDMA33
acd0: CD-RW <R/RW 12x8x32> at ata0-slave PIO4
Mounting root from ufs:/dev/ad0s1a
cd0 at ata0 bus 0 target 1 lun 0
cd0: <IDE-CD R/RW 12x8x32 2.3> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
IP packet filtering initialized, divert disabled, rule-based forwarding enabled, default to deny, logging disabled


Mich interresiert das hier:

unknown: <PNP0000> can't assign resources
unknown: <PNP0303> can't assign resources
unknown: <PNP0f13> can't assign resources
unknown: <PNP0c02> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0401> can't assign resources
unknown: <PNP0501> can't assign resources

Hab grad mein kernek neu gebaut, damit ich mein brenner als scsi device nutzen kann. davor hab ich die fehlermeldungen nicht gesehen...aber sicher bin ich mir nicht,
Was kann es sein?

Bedanke mich jetzt schon!
 
hast du
options PNPBIOS
im kernel?

ich finde in deiner dmesg nichts über eine audiokarte oder so, evtl bin ich auch blind

> There's a 99% chance you don't need the "options PNPBIOS" - it's mainly
> for old machines like the P200 in my closet with integrated sound. That is
> what typically causes the "unknown: <PNP___> can't assign resources" error
> messages. Try taking it out of the kernel config and giving things another
> go.

hoffe es hilft
 
Ja, PNPBIOS ist aktiviert.
Das steht in der dmesg ?ber meine OnBoard Soundkarte.

pcm0: <Intel ICH (82801AA)> port 0xec00-0xec3f,0xe800-0xe8ff irq 11 at device 31
.5 on pci0
pcm0: <Analog Devices AD1881 AC97 Codec>

Meinst du das Problemmt liegt daran, dass ich kein PNPBIOS im Kernel ben?tige?
 
Plug &Pray aus dem Bios raus, wenn es aktiviert ist.

Laut google hat beispielsweise PNP0501 was mit ACPI zu tun. Spiel ma damit rum, kann auch sein, dass Dein System nicht so ACPI-konform ist. Also mal testweise deaktivieren usw.
 
Original geschrieben von d4mi4n
oh ac97 gar net gsehn
versuchs einfach mal ohne, notfalls kannstes ja wieder reinmachen
Zum Vergrößern anklicken....

Ok, das funzt. Hab einfach neues Kernel compiliert und die option PNPBIOS rausgenomen. Jetzt siet mein dmesg gut aus )))

Ich bedanke mich bei allen!!!
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Zurück
Oben