MIKQ
Active Member
Habe Probleme mit dnsmasq die so in der Doku und FAQ nicht auftauchen.
Irgendwie funtkioniert die dns Auflösung in die Welt, aber wenn ich Versuche über die Shell dnsmasq zu steuern bekommen ich nur:
Manchmal gibt die Shell auch folgendes aus:
Wo finde ich den Prozess?
Die Windows Mühlen nehmen offensichtlich den richtigen Nameserver (192.168.0.4):
Kriegen aber nix zurück.
Offensichtlich klappt das Zusammenspiel zwischen DHCPD und DNS nicht.
Habe die /etc/dnsmasq.conf wie folgt editiert:
Ohne Erfolg?
Eine
existiert auf meinem OpenBSD aucht nicht. Ist das normal?
Wo kann ich noch suchen?
Gruß
MIKQ
Irgendwie funtkioniert die dns Auflösung in die Welt, aber wenn ich Versuche über die Shell dnsmasq zu steuern bekommen ich nur:
Code:
#/usr/local/sbin\>dnsmasq -i xl0 -z
# -bash: dnsmasq: command not found
Manchmal gibt die Shell auch folgendes aus:
Code:
dnsmasq: failed to bind listening socket for fe80:2::250:4ff:f usw.. Address already in use
Wo finde ich den Prozess?
Code:
# ps auwx
USER PID %CPU %MEM VSZ RSS TT STAT STARTED TIME COMMAND
root 1 0.0 0.1 448 276 ?? Is 12:38AM 0:00.01 /sbin/init
root 5906 0.0 0.5 888 1312 ?? Ss 12:39AM 0:00.75 /usr/sbin/ppp -ddial netcol
_ppp 8755 0.0 0.2 376 640 ?? S 12:39AM 0:00.19 /usr/sbin/pppoe -i fxp0
root 5217 0.0 0.3 400 664 ?? Is 12:39AM 0:00.01 syslogd: [priv] (syslogd)
_syslogd 23801 0.0 0.3 420 672 ?? S 12:39AM 0:00.03 syslogd -a /var/empty/dev/log
root 17913 0.0 0.1 436 368 ?? Is 12:39AM 0:00.01 pflogd: [priv] (pflogd)
_pflogd 15187 0.0 0.1 500 312 ?? S 12:39AM 0:00.08 pflogd: [running] -s 116 -i pflog0 -f /var/log/pflog (pflogd)
_dhcp 12616 0.0 0.3 476 704 ?? Is 12:39AM 0:00.00 /usr/sbin/dhcpd xl0
root 200 0.0 0.3 352 688 ?? Is 12:39AM 0:00.01 inetd
root 5079 0.0 0.6 1072 1428 ?? Ss 12:39AM 0:00.06 sendmail: accepting connections (sendmail)
root 20288 0.0 0.4 548 1132 ?? Is 12:39AM 0:00.00 /usr/sbin/sshd
nobody 16866 0.0 0.3 524 824 ?? I 12:39AM 0:00.02 /usr/local/sbin/dnsmasq -i xl0 -z
nobody 28041 0.0 0.3 492 760 ?? Is 12:39AM 0:00.01 /usr/local/sbin/noip2
root 30487 0.0 0.3 624 772 ?? Ss 12:39AM 0:00.01 cron
root 185 0.0 0.9 3348 2216 ?? Is 12:42AM 0:00.06 sshd: User [priv] (sshd)
User 2137 0.0 0.7 3320 1848 ?? S 12:42AM 0:00.37 sshd: User@ttyp0 (sshd)
User 22911 0.0 0.6 968 1524 p0 Is 12:42AM 0:00.04 -bash (bash)
root 27092 0.0 0.6 824 1560 p0 I 12:42AM 0:00.06 -bash (bash)
root 18994 0.0 0.2 368 408 p0 S 12:59AM 0:00.01 ksh
root 27918 0.0 0.6 712 1544 p0 S 1:01AM 0:00.02 bash
root 11568 0.0 0.1 328 264 p0 R+ 1:02AM 0:00.00 ps -auwx
root 5733 0.0 0.3 228 728 C0 Is+ 12:39AM 0:00.01 /usr/libexec/getty std.9600 ttyC0
root 1008 0.0 0.3 256 736 C1 Is+ 12:39AM 0:00.01 /usr/libexec/getty std.9600 ttyC1
root 13559 0.0 0.3 216 732 C2 Is+ 12:39AM 0:00.01 /usr/libexec/getty std.9600 ttyC2
root 24536 0.0 0.3 320 728 C3 Is+ 12:39AM 0:00.01 /usr/libexec/getty std.9600 ttyC3
root 30859 0.0 0.3 264 720 C5 Is+ 12:39AM 0:00.01 /usr/libexec/getty std.9600 ttyC5
Die Windows Mühlen nehmen offensichtlich den richtigen Nameserver (192.168.0.4):
Code:
C:\Dokumente und Einstellungen\User2>nslookup MEINTollerANDERERServer
Server: OpenBSD.my.domain
Address: 192.168.0.4
Kriegen aber nix zurück.
Offensichtlich klappt das Zusammenspiel zwischen DHCPD und DNS nicht.
Habe die /etc/dnsmasq.conf wie folgt editiert:
Code:
# If you want dnsmasq to listen for DHCP and DNS requests only on
# specified interfaces (and the loopback) give the name of the
# interface (eg eth0) here.
# Repeat the line for more than one interface.
interface=xl0
Ohne Erfolg?
Eine
Code:
/etc/ethers
Wo kann ich noch suchen?
Gruß
MIKQ