DragonFlyBSD 1.0 RC1 ist veröffentlicht worden

T

thor

mama said i am a bad boy
In einer kleinen Hinweis-Mail auf der Kernel-Liste des DragonFly-BSD-Projektes hat Matthew Dillon den Hinweis gepostet, dass heute die RC1 der stabilen 1.0-Releaseversion veröffentlicht wurde.

ISOs findet man unter:
dfly_powered1.png


http://www.dragonflybsd.org/main/download.cgi
ftp://ftp.dragonflybsd.org/iso-images/dfly-1.0RC1.iso.gz

Die offizielle Ankündigung ist für heute am Abend anberaumt. Also, you are an early adopter now ;)

Thorsten

[Mail im Original]

I'm too tired to announce it officially. I'll put together a better
blurb monday evening (and also announce it on the FreeBSD lists
monday evening). But for now ... this is the time for locals to
download! The 1.0-RC1 ISO is now available!

http://www.dragonflybsd.org/main/download.cgi
ftp://ftp.dragonflybsd.org/iso-images/dfly-1.0RC1.iso.gz

-Matt
 
Zuletzt bearbeitet:
Zuletzt bearbeitet:
Hmm, warum lesen ich da immer nur von "ad" un nichts von "da". Soll das heissen DFBSD unterstützt bisher nur IDE Platten?
 
asg schrieb:
Hmm, warum lesen ich da immer nur von "ad" un nichts von "da". Soll das heissen DFBSD unterstützt bisher nur IDE Platten?
Zum Vergrößern anklicken....

Ich lese in dmesg was von da:
da0 at bt0 bus 0 target 0 lun 0
da0: <VMware, VMware Virtual S 1.0> Fixed Direct Access SCSI-2 device
da0: 3.300MB/s transfers, Tagged Queueing Enabled
da0: 4096MB (8388608 512 byte sectors: 255H 63S/T 522C)
cd0 at ata1 bus 0 target 0 lun 0

Vollständig:

Copyright (c) 2003-2004 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
DragonFly 1.0-CURRENT #23: Fri Jun 25 01:41:53 GMT 2004
root@GeekGod.dragonflybsd.com:/usr/obj/usr/src/sys/DEBUGGER
CPU: Intel Pentium III (848.45-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x688 Stepping = 8
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 167772160 (163840K bytes)
avail memory = 152072192 (148508K bytes)
Preloaded elf kernel "/kernel" at 0xc05c1000.
md0: Malloc disk
pcibios: BIOS version 2.10
Using $PIR table, 9 entries at 0xc00fdf30
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using MMX optimized bcopy/copyin/copyout
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xf4000000-0xf7ffffff at device 0.0 on pci0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x1050-0x105f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
installed MI handler for int 14
ata1: at 0x170 irq 15 on atapci0
installed MI handler for int 15
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1060-0x107f irq 9 at device 7.2 on pci0
installed MI handler for int 9
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <Intel 82371AB Power management controller> at 7.3
pci0: <VGA-compatible display device> at 15.0
bt0: <Buslogic Multi-Master SCSI Host Adapter> port 0x1440-0x145f mem 0xf8000000-0xf800001f irq 11 at device 16.0 on pci0
bt0: BT-958 FW Rev. 5.07B Ultra Wide SCSI Host Adapter, SCSI ID 7, 192 CCBs
installed MI handler for int 11
lnc0: <PCNet/PCI Ethernet adapter> port 0x1080-0x10ff irq 10 at device 17.0 on pci0
lnc0: Attaching PCNet/PCI Ethernet adapter
installed MI handler for int 10
lnc0: PCnet-PCI address 00:0c:29:1d:89:20
pci0: <unknown card> (vendor=0x1274, dev=0x1371) at 18.0 irq 9
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xca000-0xcafff,0xdc000-0xdffff,0xe4000-0xe7fff on isa0
fdc0: <Intel 82077 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
installed MI handler for int 6
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
installed MI handler for int 1
psm0: failed to get data.
psm0: <PS/2 Mouse> irq 12 on atkbdc0
installed MI handler for int 12
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
installed MI handler for int 4
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
installed MI handler for int 3
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
installed MI handler for int 7
installed MI handler for int 0
ad0: 4095MB <VMware Virtual IDE Hard Drive> [8322/16/63] at ata0-master UDMA33
acd0: CDROM <VMware Virtual IDE CDROM Drive> at ata1-master PIO4
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/ad0s1a
da0 at bt0 bus 0 target 0 lun 0
da0: <VMware, VMware Virtual S 1.0> Fixed Direct Access SCSI-2 device
da0: 3.300MB/s transfers, Tagged Queueing Enabled
da0: 4096MB (8388608 512 byte sectors: 255H 63S/T 522C)
cd0 at ata1 bus 0 target 0 lun 0
cd0: <NECVMWar VMware IDE CDR10 1.00> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
 
Zuletzt bearbeitet von einem Moderator:
Kann dazu nix sagen, habe reinen IDE-Systempool hier. Vielleicht mal die Listen durchkämmen?!

Thorsten
 
Probieren geht vor Studieren.
Was in VMware funktioniert wird es auf realer Hardware doch auch tun.

Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s1a
da0 at bt0 bus 0 target 0 lun 0Waiting 15 seconds for SCSI devices to settle
da0: <VMware, VMware Virtual S 1.0> Fixed Direct Access SCSI-2 device
da0: 3.300MB/s transfers, Tagged Queueing Enabled
da0: 4096MB (8388608 512 byte sectors: 255H 63S/T 522C)

Vollständig:

Copyright (c) 2003-2004 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
DragonFly 1.0-CURRENT #23: Fri Jun 25 01:41:53 GMT 2004
root@GeekGod.dragonflybsd.com:/usr/obj/usr/src/sys/DEBUGGER
CPU: Intel Pentium III (848.41-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x688 Stepping = 8
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 167772160 (163840K bytes)
avail memory = 152072192 (148508K bytes)
Preloaded elf kernel "/kernel" at 0xc05c1000.
md0: Malloc disk
pcibios: BIOS version 2.10
Using $PIR table, 9 entries at 0xc00fdf30
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using MMX optimized bcopy/copyin/copyout
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xf4000000-0xf7ffffff at device 0.0 on pci0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x1050-0x105f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
installed MI handler for int 14
ata1: at 0x170 irq 15 on atapci0
installed MI handler for int 15
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1060-0x107f irq 9 at device 7.2 on pci0
installed MI handler for int 9
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <Intel 82371AB Power management controller> at 7.3
pci0: <VGA-compatible display device> at 15.0
bt0: <Buslogic Multi-Master SCSI Host Adapter> port 0x1440-0x145f mem 0xf8000000-0xf800001f irq 11 at device 16.0 on pci0
bt0: BT-958 FW Rev. 5.07B Ultra Wide SCSI Host Adapter, SCSI ID 7, 192 CCBs
installed MI handler for int 11
lnc0: <PCNet/PCI Ethernet adapter> port 0x1080-0x10ff irq 10 at device 17.0 on pci0
lnc0: Attaching PCNet/PCI Ethernet adapter
installed MI handler for int 10
lnc0: PCnet-PCI address 00:0c:29:21:b4:79
pci0: <unknown card> (vendor=0x1274, dev=0x1371) at 18.0 irq 9
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xca000-0xcafff,0xdc000-0xdffff,0xe4000-0xe7fff on isa0
fdc0: <Intel 82077 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
installed MI handler for int 6
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
installed MI handler for int 1
psm0: failed to get data.
psm0: <PS/2 Mouse> irq 12 on atkbdc0
installed MI handler for int 12
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
installed MI handler for int 4
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
installed MI handler for int 3
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
installed MI handler for int 7
installed MI handler for int 0
acd0: CDROM <VMware Virtual IDE CDROM Drive> at ata1-master PIO4
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s1a
da0 at bt0 bus 0 target 0 lun 0Waiting 15 seconds for SCSI devices to settle
da0: <VMware, VMware Virtual S 1.0> Fixed Direct Access SCSI-2 device
da0: 3.300MB/s transfers, Tagged Queueing Enabled
da0: 4096MB (8388608 512 byte sectors: 255H 63S/T 522C)
cd0 at ata1 bus 0 target 0 lun 0
cd0: <NECVMWar VMware IDE CDR10 1.00> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
WARNING: #da/0x20000 si_iosize_max=0, using DFLTPHYS.
WARNING: #da/0x20003 si_iosize_max=0, using DFLTPHYS.
WARNING: #da/0x20004 si_iosize_max=0, using DFLTPHYS.
WARNING: #da/0x20005 si_iosize_max=0, using DFLTPHYS.
 
nein, DFLY unterstuetzt natuerlich auch SCSI-hardware:

ahc0: <Adaptec 19160B Ultra160 SCSI adapter> port 0xa400-0xa4ff mem 0xd9800000-0xd9800fff irq 9 at dev
ice 9.0 on pci0
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec 29160N Ultra160 SCSI adapter> port 0xa000-0xa0ff mem 0xd9000000-0xd9000fff irq 9 at dev
ice 10.0 on pci0
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
[...]
da1 at ahc0 bus 0 target 1 lun 0
da1: <QUANTUM ATLAS10K2-TY184L DA40> Fixed Direct Access SCSI-3 device
da1: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da1: 17510MB (35860910 512 byte sectors: 255H 63S/T 2232C)
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DRVS09V 0110> Fixed Direct Access SCSI-3 device
da0: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da0: 8754MB (17928698 512 byte sectors: 255H 63S/T 1116C)
cd1 at ata1 bus 0 target 0 lun 0
cd1: <TOSHIBA DVD-ROM SD-M1402 1000> Removable CD-ROM SCSI-0 device
cd1: 16.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
cd0 at ahc1 bus 0 target 5 lun 0
cd0: <TEAC CD-R58S 1.0P> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
da2 at ahc1 bus 0 target 1 lun 0
da2: <IBM DDRS-34560 S97B> Fixed Direct Access SCSI-2 device
da2: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
da2: 4357MB (8925000 512 byte sectors: 255H 63S/T 555C)da1 at ahc0 bus 0 target 1 lun 0
da1: <QUANTUM ATLAS10K2-TY184L DA40> Fixed Direct Access SCSI-3 device
da1: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da1: 17510MB (35860910 512 byte sectors: 255H 63S/T 2232C)
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DRVS09V 0110> Fixed Direct Access SCSI-3 device
da0: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da0: 8754MB (17928698 512 byte sectors: 255H 63S/T 1116C)
cd1 at ata1 bus 0 target 0 lun 0
cd1: <TOSHIBA DVD-ROM SD-M1402 1000> Removable CD-ROM SCSI-0 device
cd1: 16.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
cd0 at ahc1 bus 0 target 5 lun 0
cd0: <TEAC CD-R58S 1.0P> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
da2 at ahc1 bus 0 target 1 lun 0
da2: <IBM DDRS-34560 S97B> Fixed Direct Access SCSI-2 device
da2: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
da2: 4357MB (8925000 512 byte sectors: 255H 63S/T 555C)

allerdings is IDE-hardware etwas verbreiteter als SCSI, weshalb man die doc wohl eher nach IDE ausgerichtet hat, das newbies damit eher klar kommen.....
 
Wer durch des Argwohns Brille schaut, sieht die Maden selbst im Sauerkraut.
 
Nur sind im Sauerkraut dann keine Maden,
geh besser in den Brillenladen,
und auch zum Hörgerätefachmann geh,
denn wenn ich manche Menschen hör und seh,
merk ich, es ist meist mehr als nur,
es ist fehlende Sozialkultur,
es ist der Egoismus, der Argwohn, die Bosheit gar,
die an allen Dingen schuld dran war,
der Mensch, an sich ein gutes Wesen,
sollt nicht nur beherrschen das Rechnen, Schreiben, Lesen,
auch Einschätzungsgabe sind notwendig und wichtig,
sonst wird das Leben aus Mangel gleich gar nichtig.

Thor<reim&klugscheiss>sten
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Zurück
Oben